本文整理汇总了Python中RPi.GPIO.RPI_INFO属性的典型用法代码示例。如果您正苦于以下问题：Python GPIO.RPI_INFO属性的具体用法？Python GPIO.RPI_INFO怎么用？Python GPIO.RPI_INFO使用的例子？那么恭喜您, 这里精选的属性代码示例或许可以为您提供帮助。您也可以进一步了解该属性所在类RPi.GPIO的用法示例。
在下文中一共展示了GPIO.RPI_INFO属性的5个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Python代码示例。
示例1: index
# 需要导入模块: from RPi import GPIO [as 别名]
# 或者: from RPi.GPIO import RPI_INFO [as 别名]
def index(environ, response):
modes = {
-1: "MODE_UNKNOWN",
10: "BOARD",
11: "BCM",
40: "SERIAL",
41: "SPI",
42: "I2C",
43: "PWM"
}
status = "200 OK"
header = [("Content-Type", "application/json")]
result = {
"GPIO.RPI_INFO": GPIO.RPI_INFO,
"GPIO.VERSION": GPIO.VERSION,
"MODE": modes[ GPIO.getmode() ]
}
response(status, header)
return [json.dumps(result).encode()] 示例2: ResetIOT_HW
# 需要导入模块: from RPi import GPIO [as 别名]
# 或者: from RPi.GPIO import RPI_INFO [as 别名]
def ResetIOT_HW(cls, bMode):
"""Set Raspberry pi GPIO pins and reset RF Explorer device
Parameters:
bMode -- True if the baudrate is set to 500000bps, False to 2400bps
"""
try:
import RPi.GPIO as GPIO
#print("RPi info: " + str(GPIO.RPI_INFO)) #information about your RPi:
#print("RPi.GPio version: " + GPIO.VERSION) #version of RPi.GPIO:
GPIO.setwarnings(False)
GPIO.setmode(GPIO.BOARD) #refer to the pin numbers on the P1 header of the Raspberry Pi board
GPIO.setup(12, GPIO.OUT) #set /reset (pin 12) to output
GPIO.output(12, False) #set /reset (pin 12) to LOW
GPIO.setup(21, GPIO.OUT) #set GPIO2 (pin 21) to output
GPIO.output(21, bMode) #set GPIO2 (pin 21) to HIGH (for 500Kbps)
time.sleep(0.1) #wait 100ms
GPIO.output(12, True) #set /reset to HIGH
time.sleep(2.5) #wait 2.5sec
GPIO.setup(21, GPIO.IN) #set GPIO2 to input
GPIO.cleanup() #clean up GPIO channels
except RuntimeError:
print("Error importing RPi.GPIO! This is probably because you need superuser privileges. You can achieve this by using 'sudo' to run your script") 示例3: _get_bus_number
# 需要导入模块: from RPi import GPIO [as 别名]
# 或者: from RPi.GPIO import RPI_INFO [as 别名]
def _get_bus_number(self):
pi_type = GPIO.RPI_INFO['TYPE']
if pi_type in self._BUS_0_TYPES:
bus_number = 0
elif pi_type in self._BUS_1_TYPES:
bus_number = 1
else:
raise ValueError('Reading Pi type error, Your Pi "{0}"" is not in the list.\n Please post an Issus at our Github Page or contract us\n Github page: https://github.com/sunfounder/Sunfounder_Smart_Video_Car_Kit_for_RaspberryPi/issues\n Email: support@sunfounder.com\n SunFounder'.format(pi_type))
if self._DEBUG:
print self._DEBUG_INFO, 'Get i2c bus number %d' % bus_number
return bus_number 示例4: main
# 需要导入模块: from RPi import GPIO [as 别名]
# 或者: from RPi.GPIO import RPI_INFO [as 别名]
def main():
import RPi.GPIO as GPIO
import time
try:
print(GPIO.VERSION)
print(GPIO.RPI_INFO)
GPIO.setmode(GPIO.BOARD)
GPIO.setwarnings(False)
GPIO.setup(12, GPIO.OUT)
GPIO.setup(11, GPIO.OUT, initial=GPIO.HIGH)
GPIO.setup(13, GPIO.IN)
GPIO.setup(15, GPIO.OUT)
GPIO.setup([16, 18], GPIO.OUT)
GPIO.setup((8, 10), GPIO.OUT)
GPIO.setup([21, 19], GPIO.IN)
GPIO.setup(3, GPIO.IN)
GPIO.cleanup(3)
GPIO.setup([5, 7], GPIO.OUT)
GPIO.cleanup([5, 7])
GPIO.setup([5, 7], GPIO.IN)
GPIO.cleanup((5, 7))
while True:
GPIO.output(12, GPIO.HIGH)
GPIO.output(11, 0)
GPIO.output(15, True)
GPIO.output([16, 18], not GPIO.input(16))
GPIO.output((8, 10), [GPIO.HIGH, GPIO.LOW])
time.sleep(1)
GPIO.output(12, GPIO.LOW)
GPIO.output(11, 1)
GPIO.output(15, False)
GPIO.output((16, 18), not GPIO.input(16))
GPIO.output([8, 10], (GPIO.LOW, GPIO.HIGH))
time.sleep(1)
finally:
GPIO.cleanup() 示例5: main
# 需要导入模块: from RPi import GPIO [as 别名]
# 或者: from RPi.GPIO import RPI_INFO [as 别名]
def main():
import RPi.GPIO as GPIO
import time
try:
print(GPIO.VERSION)
print(GPIO.RPI_INFO)
GPIO.setmode(GPIO.BCM)
GPIO.setwarnings(False)
GPIO.setup(18, GPIO.OUT)
GPIO.setup(17, GPIO.OUT, initial=GPIO.HIGH)
GPIO.setup(27, GPIO.IN)
GPIO.setup(22, GPIO.OUT)
GPIO.setup([23, 24], GPIO.OUT)
GPIO.setup((14, 15), GPIO.OUT)
GPIO.setup([9, 10], GPIO.IN)
GPIO.setup(2, GPIO.IN)
GPIO.cleanup(2)
GPIO.setup([3, 4], GPIO.OUT)
GPIO.cleanup([3, 4])
GPIO.setup([3, 4], GPIO.IN)
GPIO.cleanup((3, 4))
while True:
GPIO.output(18, GPIO.HIGH)
GPIO.output(17, 0)
GPIO.output(22, True)
GPIO.output([23, 24], not GPIO.input(23))
GPIO.output((14, 15), [GPIO.HIGH, GPIO.LOW])
time.sleep(1)
GPIO.output(18, GPIO.LOW)
GPIO.output(17, 1)
GPIO.output(22, False)
GPIO.output((23, 24), not GPIO.input(23))
GPIO.output([14, 15], (GPIO.LOW, GPIO.HIGH))
time.sleep(1)
finally:
GPIO.cleanup()