PHP eZDateTime::toString方法代码示例

        // Try prepending each of the existing pathPrefixes, to see if one of them matches an existing node
        $nodeID = eZURLAliasML::fetchNodeIDByPath($pathPrefixes[$pathPrefixIndex] . $path);
    }
    if ($nodeID) {
        if (!isset($nodeIDHashCounter[$nodeID])) {
            $nodeIDHashCounter[$nodeID] = $count;
        } else {
            $nodeIDHashCounter[$nodeID] += $count;
        }
    }
}
foreach ($nodeIDHashCounter as $nodeID => $count) {
    if (eZContentObjectTreeNode::fetch($nodeID) != null) {
        $counter = eZViewCounter::fetch($nodeID);
        if ($counter == null) {
            $counter = eZViewCounter::create($nodeID);
            $counter->setAttribute('count', $count);
            $counter->store();
        } else {
            $counter->increase($count);
        }
    }
}
$dt = new eZDateTime();
$fh = fopen($updateViewLogPath, "w");
if ($fh) {
    fwrite($fh, "# Finished at " . $dt->toString() . "\n" . "# Last updated entry:" . "\n" . $lastLine . "\n");
    fclose($fh);
}
$cli->output("Finished at " . $dt->toString() . "\n");
$cli->output("View count have been updated!\n");

        $scriptFile = $scriptDirectory . '/' . $cronScript;
        if (file_exists($scriptFile)) {
            break;
        }
    }
    if (file_exists($scriptFile)) {
        if ($index > 0) {
            $cli->output();
        }
        if (!$isQuiet) {
            $startTime = new eZDateTime();
            $cli->output('Running ' . $cli->stylize('emphasize', $scriptFile) . ' at: ' . $startTime->toString(true));
        }
        eZDebug::addTimingPoint("Script {$scriptFile} starting");
        eZRunCronjobs::runScript($cli, $scriptFile);
        eZDebug::addTimingPoint("Script {$scriptFile} done");
        ++$index;
        // The transaction check
        $transactionCounterCheck = eZDB::checkTransactionCounter();
        if (isset($transactionCounterCheck['error'])) {
            $cli->error($transactionCounterCheck['error']);
        }
        if (!$isQuiet) {
            $endTime = new eZDateTime();
            $cli->output('Completing ' . $cli->stylize('emphasize', $scriptFile) . ' at: ' . $endTime->toString(true));
            $elapsedTime = new eZTime($endTime->timeStamp() - $startTime->timeStamp());
            $cli->output('Elapsed time: ' . sprintf('%02d:%02d:%02d', $elapsedTime->hour(), $elapsedTime->minute(), $elapsedTime->second()));
        }
    }
}
$script->shutdown();

 } else {
     $action = readline("Remote ID '{$nonUniqueRemoteIDData['remote_id']}' is used for {$nonUniqueRemoteIDData['cnt']} different tree nodes. Do you want to see the details (d) or do you want this inconsistency to be fixed automatically (a) ?");
     while (!in_array($action, array('a', 'd'))) {
         $action = readline('Invalid option. Type either d for details or a to fix automatically.');
     }
 }
 $treeNodes = eZPersistentObject::fetchObjectList(eZContentObjectTreeNode::definition(), null, array('remote_id' => $nonUniqueRemoteIDData['remote_id']), array('modified_subnode' => 'asc'));
 switch ($action) {
     case 'd':
         $cli->output('');
         $cli->output('Select the number of the tree node that you want to keep the current remote ID. The other listed tree nodes will get a new one.');
         $cli->output('');
         foreach ($treeNodes as $i => $treeNode) {
             $nodeID = $treeNode->attribute('node_id');
             $dateTime = new eZDateTime($treeNode->attribute('modified_subnode'));
             $formattedDateTime = $dateTime->toString(true);
             $pathIdentificationString = $treeNode->attribute('path_identification_string');
             $cli->output("{$i}) {$pathIdentificationString} (Node ID: {$nodeID}, modified_subnode: {$formattedDateTime} )");
             $cli->output('');
         }
         do {
             $skip = readline('Number of nodes that should keep the current remote ID: ');
         } while (!array_key_exists($skip, $treeNodes));
         break;
     case 'a':
     default:
         $skip = 0;
 }
 $cli->output('Fixing...');
 foreach ($treeNodes as $i => $treeNode) {
     if ($i == $skip) {

    $nodeObject = eZContentObjectTreeNode::fetch($nodeID);
    if ($nodeObject != null) {
        $counter = eZViewCounter::fetch($nodeID);
        if ($counter == null) {
            $counter = eZViewCounter::create($nodeID);
        }
        $counter->increase();
    }
}
foreach ($pathArray as $path) {
    $nodeID = eZURLAliasML::fetchNodeIDByPath($path);
    if ($nodeID) {
        $counter = eZViewCounter::fetch($nodeID);
        if ($counter == null) {
            $counter = eZViewCounter::create($nodeID);
        }
        $counter->increase();
    }
}
$dt = new eZDateTime();
$fh = fopen($updateViewLogPath, "w");
if ($fh) {
    fwrite($fh, "# Finished at " . $dt->toString() . "\n");
    fwrite($fh, "# Last updated entry:" . "\n");
    fwrite($fh, $lastLine . "\n");
    fclose($fh);
}
$cli->output("Finished at " . $dt->toString() . "\n");
if (!$isQuiet) {
    $cli->output("View count have been updated!\n");
}

$logFilePath = '';
$plIni = eZINI::instance('ezperformancelogger.ini');
$logTo = $plIni->variable('GeneralSettings', 'LogMethods');
if (in_array('apache', $logTo) && !in_array('logfile', $logTo)) {
    $logFileIni = eZINI::instance('logfile.ini');
    $logFilePath = $logFileIni->variable('AccessLogFileSettings', 'StorageDir') . '/' . $logFileIni->variable('AccessLogFileSettings', 'LogFileName');
} else {
    if (!in_array('apache', $logTo) && in_array('logfile', $logTo)) {
        $logFilePath = $plIni->variable('logfileSettings', 'FileName');
    } else {
        $cli->error("Cannot decide which log-file to open for reading, please enable either apache-based logging or file-based logging.");
        $script->shutdown(1);
    }
}
if ($logFilePath != '') {
    $cli->output("Parsing file " . $logFilePath);
    $storageClass = $plIni->variable('ParsingSettings', 'StorageClass');
    $excludeRegexps = $plIni->variable('ParsingSettings', 'ExcludeUrls');
    $ok = eZPerfLoggerLogManager::updateStatsFromLogFile($logFilePath, 'eZPerfLoggerApacheLogger', $storageClass, 'updateperfstats.log', $excludeRegexps);
    if ($ok === false) {
        $cli->output("Error parsing file {$logFilePath}. Please run script in debug mode for more info");
    } else {
        $cli->output("{$ok['counted']} lines containing data found");
    }
}
$dt = new eZDateTime();
$cli->output("Finished at " . $dt->toString() . "\n");
if ($script->verboseOutputLevel() > 0) {
    $cli->output("Perf counters have been updated\n");
}
$script->shutdown();

 /**
  * Writes a "token file"
  * This is useful whenever there are log files which get parse based on cronjobs
  * and we have to remember the last line which has been found
  */
 protected static function writeUpdateToken($tokenFile, $tokenLine)
 {
     $sys = eZSys::instance();
     $updateViewLogPath = $sys->varDirectory() . "/" . eZPerfLoggerINI::variable('FileSettings', 'LogDir', 'site.ini') . "/" . $tokenFile;
     $dt = new eZDateTime();
     if (!file_put_contents($updateViewLogPath, "# Finished at " . $dt->toString() . "\n" . "# Last updated entry:" . "\n" . $tokenLine . "\n")) {
         eZPerfLoggerDebug::writeError("Could not store last date of perf-log file parsing in {$updateViewLogPath}, double-counting might occur", __METHOD__);
     }
 }