本文整理汇总了PHP中services_unbound_configure函数的典型用法代码示例。如果您正苦于以下问题:PHP services_unbound_configure函数的具体用法?PHP services_unbound_configure怎么用?PHP services_unbound_configure使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了services_unbound_configure函数的7个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的PHP代码示例。
示例1: dhcpv6_apply_changes
function dhcpv6_apply_changes($dhcpdv6_enable_changed)
{
$retval = 0;
$retvaldhcp = 0;
$retvaldns = 0;
/* Stop DHCPv6 so we can cleanup leases */
killbypid("{$g['dhcpd_chroot_path']}{$g['varrun_path']}/dhcpdv6.pid");
// dhcp_clean_leases();
/* dnsmasq_configure calls dhcpd_configure */
/* no need to restart dhcpd twice */
if (isset($config['dnsmasq']['enable']) && isset($config['dnsmasq']['regdhcpstatic'])) {
$retvaldns = services_dnsmasq_configure();
if ($retvaldns == 0) {
clear_subsystem_dirty('hosts');
clear_subsystem_dirty('staticmaps');
}
} else {
if (isset($config['unbound']['enable']) && isset($config['unbound']['regdhcpstatic'])) {
$retvaldns = services_unbound_configure();
if ($retvaldns == 0) {
clear_subsystem_dirty('unbound');
clear_subsystem_dirty('staticmaps');
}
} else {
$retvaldhcp = services_dhcpd_configure();
if ($retvaldhcp == 0) {
clear_subsystem_dirty('staticmaps');
}
}
}
if ($dhcpdv6_enable_changed) {
$retvalfc = filter_configure();
}
if ($retvaldhcp == 1 || $retvaldns == 1 || $retvalfc == 1) {
$retval = 1;
}
return get_std_save_message($retval);
}
示例2: explode
} else {
$pconfig['active_interface'] = explode(",", $a_unboundcfg['active_interface']);
}
if (empty($a_unboundcfg['outgoing_interface'])) {
$pconfig['outgoing_interface'] = array();
} else {
$pconfig['outgoing_interface'] = explode(",", $a_unboundcfg['outgoing_interface']);
}
if (empty($a_unboundcfg['system_domain_local_zone_type'])) {
$pconfig['system_domain_local_zone_type'] = "transparent";
} else {
$pconfig['system_domain_local_zone_type'] = $a_unboundcfg['system_domain_local_zone_type'];
}
if ($_POST) {
if ($_POST['apply']) {
$retval = services_unbound_configure();
$savemsg = get_std_save_message($retval);
if ($retval == 0) {
clear_subsystem_dirty('unbound');
}
/* Update resolv.conf in case the interface bindings exclude localhost. */
system_resolvconf_generate();
/* Start or restart dhcpleases when it's necessary */
system_dhcpleases_configure();
} else {
$pconfig = $_POST;
unset($input_errors);
if (isset($pconfig['enable']) && isset($config['dnsmasq']['enable'])) {
if ($pconfig['port'] == $config['dnsmasq']['port']) {
$input_errors[] = gettext("The DNS Forwarder is enabled using this port. Choose a non-conflicting port, or disable the DNS Forwarder.");
}
示例3: write_config
$url = "{$prot}://{$host}/system_advanced_admin.php";
}
}
write_config();
$retval = filter_configure();
$savemsg = get_std_save_message($retval);
if ($restart_webgui) {
$savemsg .= sprintf("<br />" . gettext("One moment...redirecting to %s in 20 seconds."), $url);
}
conf_mount_rw();
setup_serial_port();
// Restart DNS in case dns rebinding toggled
if (isset($config['dnsmasq']['enable'])) {
services_dnsmasq_configure();
} elseif (isset($config['unbound']['enable'])) {
services_unbound_configure();
}
conf_mount_ro();
}
}
$pgtitle = array(gettext("System"), gettext("Advanced"), gettext("Admin Access"));
include "head.inc";
if ($input_errors) {
print_input_errors($input_errors);
}
if ($savemsg) {
print_info_box($savemsg, 'success');
}
$tab_array = array();
$tab_array[] = array(gettext("Admin Access"), true, "system_advanced_admin.php");
$tab_array[] = array(gettext("Firewall / NAT"), false, "system_advanced_firewall.php");
示例4: service_control_restart
function service_control_restart($name, $extras)
{
switch ($name) {
case 'radvd':
services_radvd_configure();
break;
case 'ntpd':
system_ntp_configure();
break;
case 'apinger':
killbypid("/var/run/apinger.pid");
setup_gateways_monitor();
break;
case 'bsnmpd':
services_snmpd_configure();
break;
case 'dhcrelay':
services_dhcrelay_configure();
break;
case 'dhcrelay6':
services_dhcrelay6_configure();
break;
case 'dnsmasq':
services_dnsmasq_configure();
break;
case 'unbound':
services_unbound_configure();
break;
case 'dhcpd':
services_dhcpd_configure();
break;
case 'igmpproxy':
services_igmpproxy_configure();
break;
case 'miniupnpd':
upnp_action('restart');
break;
case 'ipsec':
vpn_ipsec_force_reload();
break;
case 'sshd':
configd_run("sshd restart");
break;
case 'openvpn':
$vpnmode = htmlspecialchars($extras['vpnmode']);
if ($vpnmode == "server" || $vpnmode == "client") {
$id = htmlspecialchars($extras['id']);
$configfile = "/var/etc/openvpn/{$vpnmode}{$id}.conf";
if (file_exists($configfile)) {
openvpn_restart_by_vpnid($vpnmode, $id);
}
}
break;
case 'relayd':
relayd_configure(true);
break;
case 'squid':
configd_run("proxy restart");
break;
case 'suricata':
configd_run("ids restart");
break;
default:
log_error(sprintf(gettext("Could not restart unknown service `%s'"), $name));
break;
}
return sprintf(gettext("%s has been restarted."), htmlspecialchars($name));
}
示例5: filter_configure_xmlrpc
function filter_configure_xmlrpc($raw_params)
{
global $xmlrpc_g, $config;
$params = xmlrpc_params_to_php($raw_params);
if (!xmlrpc_auth($params)) {
xmlrpc_authfail();
return $xmlrpc_g['return']['authfail'];
}
filter_configure();
system_routing_configure();
setup_gateways_monitor();
relayd_configure();
require_once "openvpn.inc";
openvpn_resync_all();
if (isset($config['dnsmasq']['enable'])) {
services_dnsmasq_configure();
} elseif (isset($config['unbound']['enable'])) {
services_unbound_configure();
} else {
# Both calls above run services_dhcpd_configure(), then we just
# need to call it when they are not called to avoid restarting dhcpd
# twice, as described on ticket #3797
services_dhcpd_configure();
}
local_sync_accounts();
return $xmlrpc_g['return']['true'];
}
示例6: filter_configure
/**
* Wrapper for filter_configure()
*
* @param string $username
* @param string $password
*
* @return bool
*/
public function filter_configure($username, $password)
{
$this->auth($username, $password);
global $g, $config;
filter_configure();
system_routing_configure();
setup_gateways_monitor();
relayd_configure();
require_once "openvpn.inc";
openvpn_resync_all();
/*
* The DNS Resolver and the DNS Forwarder may both be active so
* long as * they are running on different ports.
* See ticket #5882
*/
if (isset($config['dnsmasq']['enable'])) {
/* Configure dnsmasq but tell it NOT to restart DHCP */
services_dnsmasq_configure(false);
} else {
/* kill any running dnsmasq instance */
if (isvalidpid("{$g['varrun_path']}/dnsmasq.pid")) {
sigkillbypid("{$g['varrun_path']}/dnsmasq.pid", "TERM");
}
}
if (isset($config['unbound']['enable'])) {
/* Configure unbound but tell it NOT to restart DHCP */
services_unbound_configure(false);
} else {
/* kill any running Unbound instance */
if (isvalidpid("{$g['varrun_path']}/unbound.pid")) {
sigkillbypid("{$g['varrun_path']}/unbound.pid", "TERM");
}
}
/*
* Call this separately since the above are manually set to
* skip the DHCP restart they normally perform.
* This avoids restarting dhcpd twice as described on
* ticket #3797
*/
services_dhcpd_configure();
local_sync_accounts();
return true;
}
示例7: filter_configure_xmlrpc
function filter_configure_xmlrpc($raw_params)
{
global $xmlrpc_g, $g, $config;
$params = xmlrpc_params_to_php($raw_params);
if (!xmlrpc_auth($params)) {
xmlrpc_authfail();
return $xmlrpc_g['return']['authfail'];
}
filter_configure();
system_routing_configure();
setup_gateways_monitor();
relayd_configure();
require_once "openvpn.inc";
openvpn_resync_all();
/* The DNS Resolver and the DNS Forwarder may both be active so long as
* they are running on different ports. See ticket #5882
*/
$need_dhcp_start = true;
if (isset($config['dnsmasq']['enable'])) {
/* Configure dnsmasq but tell it NOT to restart DHCP */
services_dnsmasq_configure(false);
} else {
/* kill any running dnsmasq since it is not enabled. */
if (file_exists("{$g['varrun_path']}/dnsmasq.pid")) {
sigkillbypid("{$g['varrun_path']}/dnsmasq.pid", "TERM");
}
}
if (isset($config['unbound']['enable'])) {
/* Configure unbound but tell it NOT to restart DHCP */
services_unbound_configure(false);
} else {
/* kill any running Unbound instance since it is not enabled. */
if (file_exists("{$g['varrun_path']}/unbound.pid")) {
sigkillbypid("{$g['varrun_path']}/unbound.pid", "TERM");
}
}
/* Call this separately since the above are manually set to skip the DHCP restart they normally perform.
* This avoids restarting dhcpd twice as described on ticket #3797
*/
services_dhcpd_configure();
local_sync_accounts();
return $xmlrpc_g['return']['true'];
}