当前位置: 首页>>代码示例>>PHP>>正文


PHP services_dnsmasq_configure函数代码示例

本文整理汇总了PHP中services_dnsmasq_configure函数的典型用法代码示例。如果您正苦于以下问题:PHP services_dnsmasq_configure函数的具体用法?PHP services_dnsmasq_configure怎么用?PHP services_dnsmasq_configure使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了services_dnsmasq_configure函数的8个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的PHP代码示例。

示例1: dhcpv6_apply_changes

function dhcpv6_apply_changes($dhcpdv6_enable_changed)
{
    $retval = 0;
    $retvaldhcp = 0;
    $retvaldns = 0;
    /* Stop DHCPv6 so we can cleanup leases */
    killbypid("{$g['dhcpd_chroot_path']}{$g['varrun_path']}/dhcpdv6.pid");
    // dhcp_clean_leases();
    /* dnsmasq_configure calls dhcpd_configure */
    /* no need to restart dhcpd twice */
    if (isset($config['dnsmasq']['enable']) && isset($config['dnsmasq']['regdhcpstatic'])) {
        $retvaldns = services_dnsmasq_configure();
        if ($retvaldns == 0) {
            clear_subsystem_dirty('hosts');
            clear_subsystem_dirty('staticmaps');
        }
    } else {
        if (isset($config['unbound']['enable']) && isset($config['unbound']['regdhcpstatic'])) {
            $retvaldns = services_unbound_configure();
            if ($retvaldns == 0) {
                clear_subsystem_dirty('unbound');
                clear_subsystem_dirty('staticmaps');
            }
        } else {
            $retvaldhcp = services_dhcpd_configure();
            if ($retvaldhcp == 0) {
                clear_subsystem_dirty('staticmaps');
            }
        }
    }
    if ($dhcpdv6_enable_changed) {
        $retvalfc = filter_configure();
    }
    if ($retvaldhcp == 1 || $retvaldns == 1 || $retvalfc == 1) {
        $retval = 1;
    }
    return get_std_save_message($retval);
}
开发者ID:NewEraCracker,项目名称:pfsense,代码行数:38,代码来源:services_dhcpv6.php

示例2: write_config

                $url = "{$prot}://{$host}:{$port}/system_advanced_admin.php";
            } else {
                $url = "{$prot}://{$host}/system_advanced_admin.php";
            }
        }
        write_config();
        $retval = filter_configure();
        $savemsg = get_std_save_message($retval);
        if ($restart_webgui) {
            $savemsg .= sprintf("<br />" . gettext("One moment...redirecting to %s in 20 seconds."), $url);
        }
        conf_mount_rw();
        setup_serial_port();
        // Restart DNS in case dns rebinding toggled
        if (isset($config['dnsmasq']['enable'])) {
            services_dnsmasq_configure();
        } elseif (isset($config['unbound']['enable'])) {
            services_unbound_configure();
        }
        conf_mount_ro();
    }
}
$pgtitle = array(gettext("System"), gettext("Advanced"), gettext("Admin Access"));
include "head.inc";
if ($input_errors) {
    print_input_errors($input_errors);
}
if ($savemsg) {
    print_info_box($savemsg, 'success');
}
$tab_array = array();
开发者ID:calvinbui,项目名称:pfsense,代码行数:31,代码来源:system_advanced_admin.php

示例3: write_config

        }
        write_config();
    }
}
if (isset($_POST['submit']) || isset($_POST['apply'])) {
    $retval = 0;
    $retvaldhcp = 0;
    $retvaldns = 0;
    /* Stop DHCP so we can cleanup leases */
    killbyname("dhcpd");
    dhcp_clean_leases();
    system_hosts_generate();
    /* dnsmasq_configure calls dhcpd_configure */
    /* no need to restart dhcpd twice */
    if (isset($config['dnsmasq']['enable']) && isset($config['dnsmasq']['regdhcpstatic'])) {
        $retvaldns = services_dnsmasq_configure();
        if ($retvaldns == 0) {
            clear_subsystem_dirty('hosts');
            clear_subsystem_dirty('staticmaps');
        }
    } else {
        if (isset($config['unbound']['enable']) && isset($config['unbound']['regdhcpstatic'])) {
            $retvaldns = services_unbound_configure();
            if ($retvaldns == 0) {
                clear_subsystem_dirty('unbound');
            }
        } else {
            $retvaldhcp = services_dhcpd_configure();
            if ($retvaldhcp == 0) {
                clear_subsystem_dirty('staticmaps');
            }
开发者ID:karawan,项目名称:core,代码行数:31,代码来源:services_dhcp.php

示例4: service_control_restart

function service_control_restart($name, $extras)
{
    switch ($name) {
        case 'radvd':
            services_radvd_configure();
            break;
        case 'ntpd':
            system_ntp_configure();
            break;
        case 'apinger':
            killbypid("/var/run/apinger.pid");
            setup_gateways_monitor();
            break;
        case 'bsnmpd':
            services_snmpd_configure();
            break;
        case 'dhcrelay':
            services_dhcrelay_configure();
            break;
        case 'dhcrelay6':
            services_dhcrelay6_configure();
            break;
        case 'dnsmasq':
            services_dnsmasq_configure();
            break;
        case 'unbound':
            services_unbound_configure();
            break;
        case 'dhcpd':
            services_dhcpd_configure();
            break;
        case 'igmpproxy':
            services_igmpproxy_configure();
            break;
        case 'miniupnpd':
            upnp_action('restart');
            break;
        case 'ipsec':
            vpn_ipsec_force_reload();
            break;
        case 'sshd':
            configd_run("sshd restart");
            break;
        case 'openvpn':
            $vpnmode = htmlspecialchars($extras['vpnmode']);
            if ($vpnmode == "server" || $vpnmode == "client") {
                $id = htmlspecialchars($extras['id']);
                $configfile = "/var/etc/openvpn/{$vpnmode}{$id}.conf";
                if (file_exists($configfile)) {
                    openvpn_restart_by_vpnid($vpnmode, $id);
                }
            }
            break;
        case 'relayd':
            relayd_configure(true);
            break;
        case 'squid':
            configd_run("proxy restart");
            break;
        case 'suricata':
            configd_run("ids restart");
            break;
        default:
            log_error(sprintf(gettext("Could not restart unknown service `%s'"), $name));
            break;
    }
    return sprintf(gettext("%s has been restarted."), htmlspecialchars($name));
}
开发者ID:8191,项目名称:opnsense-core,代码行数:68,代码来源:status_services.php

示例5: filter_configure_xmlrpc

function filter_configure_xmlrpc($raw_params)
{
    global $xmlrpc_g, $config;
    $params = xmlrpc_params_to_php($raw_params);
    if (!xmlrpc_auth($params)) {
        xmlrpc_authfail();
        return $xmlrpc_g['return']['authfail'];
    }
    filter_configure();
    system_routing_configure();
    setup_gateways_monitor();
    relayd_configure();
    require_once "openvpn.inc";
    openvpn_resync_all();
    if (isset($config['dnsmasq']['enable'])) {
        services_dnsmasq_configure();
    } elseif (isset($config['unbound']['enable'])) {
        services_unbound_configure();
    } else {
        # Both calls above run services_dhcpd_configure(), then we just
        # need to call it when they are not called to avoid restarting dhcpd
        # twice, as described on ticket #3797
        services_dhcpd_configure();
    }
    local_sync_accounts();
    return $xmlrpc_g['return']['true'];
}
开发者ID:michaeleino,项目名称:pfsense,代码行数:27,代码来源:xmlrpc.php

示例6: filter_configure

 /**
  * Wrapper for filter_configure()
  *
  * @param string $username
  * @param string $password
  *
  * @return bool
  */
 public function filter_configure($username, $password)
 {
     $this->auth($username, $password);
     global $g, $config;
     filter_configure();
     system_routing_configure();
     setup_gateways_monitor();
     relayd_configure();
     require_once "openvpn.inc";
     openvpn_resync_all();
     /*
      * The DNS Resolver and the DNS Forwarder may both be active so
      * long as * they are running on different ports.
      * See ticket #5882
      */
     if (isset($config['dnsmasq']['enable'])) {
         /* Configure dnsmasq but tell it NOT to restart DHCP */
         services_dnsmasq_configure(false);
     } else {
         /* kill any running dnsmasq instance */
         if (isvalidpid("{$g['varrun_path']}/dnsmasq.pid")) {
             sigkillbypid("{$g['varrun_path']}/dnsmasq.pid", "TERM");
         }
     }
     if (isset($config['unbound']['enable'])) {
         /* Configure unbound but tell it NOT to restart DHCP */
         services_unbound_configure(false);
     } else {
         /* kill any running Unbound instance */
         if (isvalidpid("{$g['varrun_path']}/unbound.pid")) {
             sigkillbypid("{$g['varrun_path']}/unbound.pid", "TERM");
         }
     }
     /*
      * Call this separately since the above are manually set to
      * skip the DHCP restart they normally perform.
      * This avoids restarting dhcpd twice as described on
      * ticket #3797
      */
     services_dhcpd_configure();
     local_sync_accounts();
     return true;
 }
开发者ID:KyleJohnstonNet,项目名称:pfsense,代码行数:51,代码来源:xmlrpc.php

示例7: filter_configure_xmlrpc

function filter_configure_xmlrpc($raw_params)
{
    global $xmlrpc_g, $g, $config;
    $params = xmlrpc_params_to_php($raw_params);
    if (!xmlrpc_auth($params)) {
        xmlrpc_authfail();
        return $xmlrpc_g['return']['authfail'];
    }
    filter_configure();
    system_routing_configure();
    setup_gateways_monitor();
    relayd_configure();
    require_once "openvpn.inc";
    openvpn_resync_all();
    /* The DNS Resolver and the DNS Forwarder may both be active so long as
     * they are running on different ports. See ticket #5882
     */
    $need_dhcp_start = true;
    if (isset($config['dnsmasq']['enable'])) {
        /* Configure dnsmasq but tell it NOT to restart DHCP */
        services_dnsmasq_configure(false);
    } else {
        /* kill any running dnsmasq since it is not enabled. */
        if (file_exists("{$g['varrun_path']}/dnsmasq.pid")) {
            sigkillbypid("{$g['varrun_path']}/dnsmasq.pid", "TERM");
        }
    }
    if (isset($config['unbound']['enable'])) {
        /* Configure unbound but tell it NOT to restart DHCP */
        services_unbound_configure(false);
    } else {
        /* kill any running Unbound instance since it is not enabled. */
        if (file_exists("{$g['varrun_path']}/unbound.pid")) {
            sigkillbypid("{$g['varrun_path']}/unbound.pid", "TERM");
        }
    }
    /* Call this separately since the above are manually set to skip the DHCP restart they normally perform.
     * This avoids restarting dhcpd twice as described on ticket #3797
     */
    services_dhcpd_configure();
    local_sync_accounts();
    return $xmlrpc_g['return']['true'];
}
开发者ID:curtiszimmerman,项目名称:pfsense,代码行数:43,代码来源:xmlrpc.php

示例8: filter_configure_xmlrpc

function filter_configure_xmlrpc($raw_params)
{
    global $xmlrpc_g;
    $params = xmlrpc_params_to_php($raw_params);
    if (!xmlrpc_auth($params)) {
        xmlrpc_authfail();
        return $xmlrpc_g['return']['authfail'];
    }
    filter_configure();
    system_routing_configure();
    setup_gateways_monitor();
    relayd_configure();
    require_once "openvpn.inc";
    openvpn_resync_all();
    services_dhcpd_configure();
    services_dnsmasq_configure();
    local_sync_accounts();
    return $xmlrpc_g['return']['true'];
}
开发者ID:rdmenezes,项目名称:pfsense,代码行数:19,代码来源:xmlrpc.php


注:本文中的services_dnsmasq_configure函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。