PHP IPS_SetVariableProfileText函数代码示例

 protected function RegisterProfile($Name, $VariablenTyp, $Icon, $Prefix, $Suffix, $MinValue, $MaxValue, $StepSize)
 {
     if (!IPS_VariableProfileExists($Name)) {
         IPS_CreateVariableProfile($Name, $VariablenTyp);
     } else {
         $profile = IPS_GetVariableProfile($Name);
         if ($profile['ProfileType'] != $VariablenTyp) {
             throw new Exception("Variable profile type does not match for profile " . $Name);
         }
     }
     IPS_SetVariableProfileIcon($Name, $Icon);
     IPS_SetVariableProfileText($Name, $Prefix, $Suffix);
     IPS_SetVariableProfileValues($Name, $MinValue, $MaxValue, $StepSize);
 }

 public function Create()
 {
     parent::Create();
     $this->RegisterPropertyString("Host", "");
     $this->RegisterPropertyString("Zone", "Main_Zone");
     $this->RegisterPropertyInteger("UpdateInterval", 5);
     if (!IPS_VariableProfileExists('Volume.YAVR')) {
         IPS_CreateVariableProfile('Volume.YAVR', 2);
     }
     IPS_SetVariableProfileDigits('Volume.YAVR', 1);
     IPS_SetVariableProfileIcon('Volume.YAVR', 'Intensity');
     IPS_SetVariableProfileText('Volume.YAVR', "", " dB");
     IPS_SetVariableProfileValues('Volume.YAVR', -80, 16, 0.5);
     $this->UpdateScenesProfile();
     $this->UpdateInputsProfile();
 }

 public function ApplyChanges()
 {
     // Diese Zeile nicht löschen
     parent::ApplyChanges();
     //Variablenprofil anlegen
     if (!IPS_VariableProfileExists("Megabyte")) {
         IPS_CreateVariableProfile("Megabyte", 2);
         IPS_SetVariableProfileValues("Megabyte", 0, 0, 2);
         IPS_SetVariableProfileText("Megabyte", "", " MB");
     }
     if ($this->ReadPropertyString("IPS_Pfad") != "" and $this->ReadPropertyString("Netzwerkkarte") != "") {
         //Variablen erstellen
         $this->RegisterVariableFloat("CPU_idle", "CPU-Auslastung", "Humidity.F", 1);
         $this->RegisterVariableFloat("CPU_volts", "CPU-Spannung", "Volt", 2);
         $this->RegisterVariableFloat("CPU_temp", "CPU-Temperatur", "Temperature", 3);
         $this->RegisterVariableFloat("HDD_total", "Gesamt Speicherplatz", "Megabyte", 4);
         $this->RegisterVariableFloat("HDD_used", "Belegter Speicherplatz", "Megabyte", 5);
         $this->RegisterVariableFloat("HDD_percent", "HDD-Belegung", "Humidity.F", 6);
         $this->RegisterVariableFloat("HDD_symcon", "IPS-Speicherbelegung", "Megabyte", 7);
         $this->RegisterVariableFloat("RAM_total", "Gesamt RAM", "Megabyte", 8);
         $this->RegisterVariableFloat("RAM_used", "Benutzer RAM", "Megabyte", 9);
         $this->RegisterVariableFloat("RAM_percent", "RAM-Auslastung", "Humidity.F", 10);
         $this->RegisterVariableString("System_Info", "System Informationen", "HTMLBox", 11);
         //Timer zeit setzen
         $this->SetTimerInterval("Update", $this->ReadPropertyInteger("UpdateInterval") * 1000);
     } else {
         //Instanz ist inaktiv
         $this->SetStatus(104);
     }
     //Variablen Logging Aktivieren / Deaktivieren
     $archiveHandlerID = IPS_GetInstanceListByModuleID('{43192F0B-135B-4CE7-A0A7-1475603F3060}')[0];
     AC_SetLoggingStatus($archiveHandlerID, $this->GetIDForIdent("CPU_idle"), $this->ReadPropertyBoolean("logCPU_idle"));
     AC_SetLoggingStatus($archiveHandlerID, $this->GetIDForIdent("CPU_volts"), $this->ReadPropertyBoolean("logCPU_volts"));
     AC_SetLoggingStatus($archiveHandlerID, $this->GetIDForIdent("CPU_temp"), $this->ReadPropertyBoolean("logCPU_temp"));
     AC_SetLoggingStatus($archiveHandlerID, $this->GetIDForIdent("HDD_total"), $this->ReadPropertyBoolean("logHDD_total"));
     AC_SetLoggingStatus($archiveHandlerID, $this->GetIDForIdent("HDD_used"), $this->ReadPropertyBoolean("logHDD_used"));
     AC_SetLoggingStatus($archiveHandlerID, $this->GetIDForIdent("HDD_percent"), $this->ReadPropertyBoolean("logHDD_percent"));
     AC_SetLoggingStatus($archiveHandlerID, $this->GetIDForIdent("HDD_symcon"), $this->ReadPropertyBoolean("logHDD_symcon"));
     AC_SetLoggingStatus($archiveHandlerID, $this->GetIDForIdent("RAM_total"), $this->ReadPropertyBoolean("logRAM_total"));
     AC_SetLoggingStatus($archiveHandlerID, $this->GetIDForIdent("RAM_used"), $this->ReadPropertyBoolean("logRAM_used"));
     AC_SetLoggingStatus($archiveHandlerID, $this->GetIDForIdent("RAM_percent"), $this->ReadPropertyBoolean("logRAM_percent"));
     IPS_ApplyChanges($archiveHandlerID);
     copy(IPS_GetKernelDir() . "modules/IPS_PI_Monitor/PI_Monitor/Raspi-PGB001.png", IPS_GetKernelDir() . "webfront/user/Raspi-PGB001.png");
 }

 public function Create()
 {
     // Diese Zeile nicht löschen.
     parent::Create();
     $this->RegisterPropertyString("API", "");
     $this->RegisterPropertyString("Location", "Menden");
     $this->RegisterPropertyInteger("UpdateInterval", 300);
     //Variablenprofil anlegen
     //$this->RegisterProfileFloat("WindSpeed.Kph", "WindSpeed", "", " kn",   0, 100, 1);
     //$this->RegisterProfileInteger("Distance.km", "Distance", "", " km",   0, 150, 1);
     if (!IPS_VariableProfileExists("WindSpeed.kt")) {
         IPS_CreateVariableProfile("WindSpeed.kt", 2);
         // 2 = Float
         IPS_SetVariableProfileIcon("WindSpeed.kt", "WindSpeed");
         IPS_SetVariableProfileValues("WindSpeed.kt", 0, 100, 1);
         IPS_SetVariableProfileText("WindSpeed.kt", "", " kn");
     }
     if (!IPS_VariableProfileExists("Distance.km")) {
         IPS_CreateVariableProfile("Distance.km", 1);
         // 1 = Integer
         IPS_SetVariableProfileIcon("Distance.km", "Distance");
         IPS_SetVariableProfileValues("Distance.km", 0, 999, 1);
         IPS_SetVariableProfileText("Distance.km", "", " km");
     }
     //Eigenschaften festlegen
     $this->RegisterVariableString("Condition", "Wetterbedingung");
     $this->RegisterVariableString("WindDirectionString", "Windrichtung");
     $this->RegisterVariableInteger("AirPressure", "Luftdruck", "AirPressure");
     $this->RegisterVariableInteger("Visibility", "Sichtweite", "Distance.km");
     $this->RegisterVariableInteger("Humidity", "Luftfeuchtigkeit", "Humidity");
     $this->RegisterVariableInteger("WindDirection", "Windrichtung", "WindDirection");
     $this->RegisterVariableFloat("Temperature", "Temperatur", "Temperature");
     $this->RegisterVariableFloat("Windchill", "Windchill", "Temperature");
     $this->RegisterVariableFloat("Dewpoint", "Taupunkt", "Temperature");
     $this->RegisterVariableFloat("WindSpeed", "Wind", "WindSpeed.kt");
     $this->RegisterVariableFloat("WindSpeedGust", "Wind in Böen", "WindSpeed.kt");
     $this->RegisterVariableFloat("UV", "UV Index");
 }

}
if (!IPS_VariableProfileExists('DimmerControl.HM')) {
    IPS_CreateVariableProfile('DimmerControl.HM', 1);
    IPS_SetVariableProfileIcon('DimmerControl.HM', 'Intensity');
    IPS_SetVariableProfileAssociation('DimmerControl.HM', -2, '0 %', '', 0xff);
    IPS_SetVariableProfileAssociation('DimmerControl.HM', -1, 'Dunkler', '', 0x339966);
    IPS_SetVariableProfileAssociation('DimmerControl.HM', 0, 'Stop', '', 0x0);
    IPS_SetVariableProfileAssociation('DimmerControl.HM', 1, 'Zurück', '', 0xff0000);
    IPS_SetVariableProfileAssociation('DimmerControl.HM', 2, 'Heller', '', 0x339966);
    IPS_SetVariableProfileAssociation('DimmerControl.HM', 3, '100 %', '', 0xff);
}
if (!IPS_VariableProfileExists('DimmerSpeed.HM')) {
    IPS_CreateVariableProfile('DimmerSpeed.HM', 2);
    IPS_SetVariableProfileIcon('DimmerSpeed.HM', 'Intensity');
    IPS_SetVariableProfileValues('DimmerSpeed.HM', 0, 30, 2);
    IPS_SetVariableProfileText('DimmerSpeed.HM', '', ' s');
}
# ENDE Konfig
$AddOnMappings = array('BLIND' => array('CONTROL' => array('Name Raum' => 'Steuerung', 'Name Gewerk' => 'Steuerung %2$s', 'Profil' => 'BlindControl.HM', 'Action' => 'BLIND_SCRIPT', 'VarTyp' => 1)), 'THERMALCONTROL_TRANSMIT' => array('CONTROL_TEMP' => array('Name Raum' => 'Soll Temperatur Vorwahl', 'Name Gewerk' => 'Soll Temperatur Vorwahl %2$s', 'Profil' => 'ControlTemp.HM', 'Action' => 'CONTROL_TEMP_SCRIPT', 'VarTyp' => 1)), 'CLIMATECONTROL_RT_TRANSCEIVER' => array('CONTROL_TEMP' => array('Name Raum' => 'Soll Temperatur Vorwahl', 'Name Gewerk' => 'Soll Temperatur Vorwahl %2$s', 'Profil' => 'ControlTemp.HM', 'Action' => 'CONTROL_TEMP_SCRIPT', 'VarTyp' => 1)), 'DIMMER' => array('DIMMER_CONTROL' => array('Name Raum' => 'Steuerung', 'Name Gewerk' => 'Steuerung %2$s', 'Profil' => 'DimmerControl.HM', 'Action' => 'DIMMER_SCRIPT', 'VarTyp' => 1), 'RAMP_TIME' => array('Name Raum' => 'Geschwindigkeit', 'Name Gewerk' => 'Geschwindigkeit %2$s', 'Profil' => 'DimmerSpeed.HM', 'Action' => 'DIMMER_SCRIPT', 'VarTyp' => 2)), 'VIRTUAL_DIMMER' => array('DIMMER_CONTROL' => array('Name Raum' => 'Steuerung', 'Name Gewerk' => 'Steuerung %2$s', 'Profil' => 'DimmerControl.HM', 'Action' => 'DIMMER_SCRIPT', 'VarTyp' => 1), 'RAMP_TIME' => array('Name Raum' => 'Geschwindigkeit', 'Name Gewerk' => 'Geschwindigkeit %2$s', 'Profil' => 'DimmerSpeed.HM', 'Action' => 'DIMMER_SCRIPT', 'VarTyp' => 2)));
ini_set('max_execution_time', count($HMCcuAddress) * 120);
//HM Sockets prüfen und einrichten
$nextPort = 5544;
$HMSockets = array_flip($HMCcuAddress);
$HMSocketsOld = IPS_GetInstanceListByModuleID("{A151ECE9-D733-4FB9-AA15-7F7DD10C58AF}");
if (count($HMSocketsOld) > 0) {
    foreach ($HMSocketsOld as $HMSocket) {
        $HMSocketIDsOld[IPS_GetProperty($HMSocket, 'Host')] = $HMSocket;
        $Port = IPS_GetProperty($HMSocket, 'Port');
        if ($Port >= $nextPort) {
            $nextPort = $Port + 1;
        }

	protected function RegisterProfileIntegerEx($Name, $Icon, $Prefix, $Suffix, $Associations)
	{
		if (sizeof($Associations) === 0) {
			$MinValue = 0;
			$MaxValue = 0;
		} else {
			$MinValue = $Associations[0][0];
			$MaxValue = $Associations[sizeof($Associations) - 1][0];
		}
		if (!IPS_VariableProfileExists($Name)) {
			IPS_CreateVariableProfile($Name, 1);
		} else {
			$profile = IPS_GetVariableProfile($Name);
			if ($profile['ProfileType'] != 1)
				throw new Exception("Variable profile type does not match for profile " . $Name);
		}
		IPS_SetVariableProfileIcon($Name, $Icon);
		IPS_SetVariableProfileText($Name, $Prefix, $Suffix);
		IPS_SetVariableProfileValues($Name, $MinValue, $MaxValue, 0);

		foreach ($Associations as $Association) {
			IPS_SetVariableProfileAssociation($Name, $Association[0], $Association[1], $Association[2], $Association[3]);
		}
	}

 /**
  * create the variable profile in symcon if it does not exist
  *
  * @param string $name name of the variable profile
  * @param int $type IPS datatype
  * @param string $prefix name prefix
  * @param string $suffix variable suffix (usually the value unit)
  * @param array $assoc value to format associations
  * @access private
  */
 private function create($name, $type, $prefix = "", $suffix = "", $assoc = NULL)
 {
     if (!IPS_VariableProfileExists($name)) {
         if ($this->debug) {
             echo "INFO - variable profile {$name} does not exist. It will be created.\n";
         }
         IPS_CreateVariableProfile($name, $type);
         IPS_SetVariableProfileText($name, $prefix, $suffix);
         if (isset($assoc)) {
             foreach ($assoc as $a) {
                 if ($this->debug) {
                     echo "INFO - variable profile association for variable {$name} and value " . $a["name"] . " does not exist and will be created\n";
                 }
                 IPS_SetVariableProfileAssociation($name, $a["val"], $a["name"], $a["icon"], $a["color"]);
             }
         }
     }
 }

 protected function RegisterProfileLEDGateway($Name, $Icon, $Prefix, $Suffix)
 {
     if (!IPS_VariableProfileExists($Name)) {
         IPS_CreateVariableProfile($Name, 1);
     } else {
         $profile = IPS_GetVariableProfile($Name);
         if ($profile['ProfileType'] != 1) {
             throw new Exception("Variable profile type does not match for profile " . $Name);
         }
     }
     $MinValue = 0;
     $MaxValue = 4;
     $StepSize = 1;
     IPS_SetVariableProfileIcon($Name, $Icon);
     IPS_SetVariableProfileText($Name, $Prefix, $Suffix);
     IPS_SetVariableProfileValues($Name, $MinValue, $MaxValue, $StepSize);
     // boolean IPS_SetVariableProfileAssociation ( string $ProfilName, float $Wert, string $Name, string $Icon, integer $Farbe ) Farbwert im HTML Farbcode (z.b. 0x0000FF für Blau). Sonderfall: -1 für transparent
     IPS_SetVariableProfileAssociation($Name, 0, "Weiß", "", 0xfffffff);
     IPS_SetVariableProfileAssociation($Name, 1, "Blau", "", 0x13adf);
     IPS_SetVariableProfileAssociation($Name, 2, "Grün", "", 0x88a08);
     IPS_SetVariableProfileAssociation($Name, 3, "Rot", "", 0xfe2e2e);
     IPS_SetVariableProfileAssociation($Name, 4, "Aus", "", 0x585858);
 }

 protected function RegisterProfileColor($Name, $Icon, $Prefix, $Suffix)
 {
     if (!IPS_VariableProfileExists($Name)) {
         IPS_CreateVariableProfile($Name, 1);
     } else {
         $profile = IPS_GetVariableProfile($Name);
         if ($profile['ProfileType'] != 1) {
             throw new Exception("Variable profile type does not match for profile " . $Name);
         }
     }
     $MinValue = 0;
     $MaxValue = 7;
     $StepSize = 1;
     IPS_SetVariableProfileIcon($Name, $Icon);
     IPS_SetVariableProfileText($Name, $Prefix, $Suffix);
     IPS_SetVariableProfileValues($Name, $MinValue, $MaxValue, $StepSize);
     // boolean IPS_SetVariableProfileAssociation ( string $ProfilName, float $Wert, string $Name, string $Icon, integer $Farbe ) Farbwert im HTML Farbcode (z.b. 0x0000FF für Blau). Sonderfall: -1 für transparent
     IPS_SetVariableProfileAssociation($Name, 0, "Rot", "", 0xfe2e2e);
     IPS_SetVariableProfileAssociation($Name, 1, "Orange", "", 0xffbf00);
     IPS_SetVariableProfileAssociation($Name, 2, "Gelb", "", 0xf7fe2e);
     IPS_SetVariableProfileAssociation($Name, 3, "Grün", "", 0x64fe2e);
     IPS_SetVariableProfileAssociation($Name, 4, "Cyan", "", 0x81f7f3);
     IPS_SetVariableProfileAssociation($Name, 5, "Blau", "", 0xff);
     IPS_SetVariableProfileAssociation($Name, 6, "Lila", "", 0xda81f5);
     IPS_SetVariableProfileAssociation($Name, 7, "Weiß", "", 0xffffff);
 }

    public function ApplyChanges()
    {
        // get instance id
        $instanceid = IPS_GetInstance($this->InstanceID)['InstanceID'];
        // rename instance
        $room = $this->ReadPropertyString("Room");
        if ($room != "") {
            IPS_SetName($instanceid, $room);
        }
        // check device
        $deviceip = $this->ReadPropertyString("DeviceIP");
        $timeout = $this->ReadPropertyString("Timeout");
        if ($deviceip != "") {
            // check device availability
            if ($timeout && Sys_Ping($deviceip, $timeout) != true) {
                //    throw new Exception("Device ".$deviceip." is not available");
                die("Unable to connect to device {$deviceip}");
            }
            include_once __DIR__ . "/bose_soundtouch_api.php";
            $bosedevice = new BoseSoundTouchAPI($deviceip);
            $result = $bosedevice->getDeviceNowPlayingAPI();
            // get device id for multiroom
            $deviceid = $this->ReadPropertyString("DeviceID");
            if ($deviceid == "" and $deviceip != "") {
                $deviceid = $result['deviceid'];
                IPS_SetProperty($instanceid, "DeviceID", "" . $deviceid . "");
                if (IPS_HasChanges($instanceid)) {
                    IPS_ApplyChanges($instanceid);
                }
            }
        }
        // never delete this line!
        parent::ApplyChanges();
        /////////////////////////////////////////////////////////////////////////////////////////////////////////
        // create profiles
        /////////////////////////////////////////////////////////////////////////////////////////////////////////
        //create zone profiles for multiroom
        $allboseinstances = IPS_GetInstanceListByModuleID("{4836EF46-FF79-4D6A-91C9-FE54F1BDF2DB}");
        // create profile for each instance / device
        foreach ($allboseinstances as $key => $instanceid) {
            $multiroomprofilename = "bose.Device" . $instanceid . "MasterZones";
            // delete zone profiles
            if (IPS_VariableProfileExists($multiroomprofilename)) {
                IPS_DeleteVariableProfile($multiroomprofilename);
            }
            IPS_CreateVariableProfile($multiroomprofilename, 1);
            // set values for profile
            foreach ($allboseinstances as $key => $value) {
                if ($instanceid == $value) {
                    IPS_SetVariableProfileAssociation($multiroomprofilename, "0", "Off", "", 0xff);
                } else {
                    $instancename = IPS_GetName($value);
                    if ($instancename != "") {
                        IPS_SetVariableProfileAssociation($multiroomprofilename, "" . ($key + 1) . "", "" . $instancename . "", "", 0xff);
                    }
                }
            }
        }
        // create volume slider profile
        $volumesliderprofilename = "bose.VolumeSlider";
        if (!IPS_VariableProfileExists($volumesliderprofilename)) {
            IPS_CreateVariableProfile($volumesliderprofilename, 1);
        }
        IPS_SetVariableProfileValues($volumesliderprofilename, 0, 100, 1);
        IPS_SetVariableProfileText($volumesliderprofilename, "", "%");
        IPS_SetVariableProfileIcon($volumesliderprofilename, "Speaker");
        // play pause preset
        $playpauseprofilename = "bose.PlayPause";
        if (!IPS_VariableProfileExists($playpauseprofilename)) {
            IPS_CreateVariableProfile($playpauseprofilename, 1);
        }
        IPS_SetVariableProfileAssociation($playpauseprofilename, "0", "Pause", "", 0xff);
        IPS_SetVariableProfileAssociation($playpauseprofilename, "1", "Play", "", 0xff);
        IPS_SetVariableProfileIcon($playpauseprofilename, "HollowArrowRight");
        // create presets and radiolocations profiles
        $instanceid = IPS_GetInstance($this->InstanceID)['InstanceID'];
        $radiostationsprofilename = "bose.Device" . $instanceid . "RadioStations";
        if (!IPS_VariableProfileExists($radiostationsprofilename)) {
            IPS_CreateVariableProfile($radiostationsprofilename, 1);
        }
        $radiolocationsprofilename = "bose.Device" . $instanceid . "RadioLocations";
        if (!IPS_VariableProfileExists($radiolocationsprofilename)) {
            IPS_CreateVariableProfile($radiolocationsprofilename, 1);
        }
        // get device presets
        if ($deviceip != "") {
            include_once __DIR__ . "/bose_soundtouch_api.php";
            $bosedevice = new BoseSoundTouchAPI($deviceip);
            $result = $bosedevice->getDevicePresetsAPI();
            for ($i = 0; $i < 6; $i++) {
                $value = $i + 1;
                $radiostationname = $result->preset[$i]->ContentItem->itemName;
                $radiostationlocation = $result->preset[$i]->ContentItem["location"];
                IPS_SetVariableProfileAssociation($radiostationsprofilename, "" . $value . "", "" . $radiostationname . "", "", 0xff);
                IPS_SetVariableProfileAssociation($radiolocationsprofilename, "" . $value . "", "" . $radiostationlocation . "", "", 0xff);
            }
            IPS_SetVariableProfileIcon($radiostationsprofilename, "Cloud");
        }
        // create timer hour profile
        $timerhourprofilename = "bose.TimerHour";
//.........这里部分代码省略.........

 /**
  * CreateFloatProfile
  * @param string $ProfileName
  * @param string $Icon
  * @param string $Präfix
  * @param string $Suffix
  * @param float $MinValue
  * @param float $MaxValue
  * @param integer $StepSize
  * @param integer $Digits
  */
 private function CreateFloatProfile($ProfileName, $Icon, $Präfix, $Suffix, $MinValue, $MaxValue, $StepSize, $Digits)
 {
     $Profile = IPS_VariableProfileExists($ProfileName);
     if ($Profile === FALSE) {
         IPS_CreateVariableProfile($ProfileName, 2);
         IPS_SetVariableProfileIcon($ProfileName, $Icon);
         IPS_SetVariableProfileText($ProfileName, $Präfix, $Suffix);
         IPS_SetVariableProfileValues($ProfileName, $MinValue, $MaxValue, $StepSize);
         IPS_SetVariableProfileDigits($ProfileName, $Digits);
     }
 }

function Variable_GetOrSet($name, $parent, $value)
{
    global $Logging;
    $VarID = @IPS_GetVariableIDByName($name, $parent);
    if (!$VarID) {
        if ($name == "Name" or $name == "Marke" or $name == "ID" or $name == "Anschrift") {
            $VarID = IPS_CreateVariable(3);
        } elseif ($name == "Geöffnet_von" or $name == "Geöffnet_bis") {
            $VarID = IPS_CreateVariable(3);
            $ProfilName = "GeoffnetVonBis_Tankstelle_TK";
            if (!IPS_VariableProfileExists($ProfilName)) {
                IPS_CreateVariableProfile($ProfilName, 3);
                IPS_SetVariableProfileText($ProfilName, "", " Uhr");
                IPS_SetVariableProfileIcon($ProfilName, "Clock");
            }
            IPS_SetVariableCustomProfile($VarID, $ProfilName);
        } elseif ($name == "Geöffnet") {
            $VarID = IPS_CreateVariable(0);
            $ProfilName = "Geoeffnet_Tankstelle_TK";
            if (!IPS_VariableProfileExists($ProfilName)) {
                IPS_CreateVariableProfile($ProfilName, 0);
                IPS_SetVariableProfileAssociation($ProfilName, 0, "Geschlossen", "", -1);
                IPS_SetVariableProfileAssociation($ProfilName, 1, "Geöffnet", "", -1);
                IPS_SetVariableProfileIcon($ProfilName, "Information");
            }
            IPS_SetVariableCustomProfile($VarID, $ProfilName);
        } elseif ($name == "Distanz") {
            $VarID = IPS_CreateVariable(2);
            $ProfilName = "Distanz_Tankstelle_TK";
            if (!IPS_VariableProfileExists($ProfilName)) {
                IPS_CreateVariableProfile($ProfilName, 2);
                IPS_SetVariableProfileText($ProfilName, "", "km");
                IPS_SetVariableProfileDigits($ProfilName, 1);
                IPS_SetVariableProfileIcon($ProfilName, "Distance");
            }
            IPS_SetVariableCustomProfile($VarID, $ProfilName);
        } elseif ($name == "Preis" or $name == "Preis_E5" or $name == "Preis_E10" or $name == "Preis_Diesel") {
            if ($value === NULL) {
                return;
            }
            $VarID = IPS_CreateVariable(2);
            $ProfilName = "Euro_Tankstelle_TK";
            if (!IPS_VariableProfileExists($ProfilName)) {
                IPS_CreateVariableProfile($ProfilName, 2);
                IPS_SetVariableProfileText($ProfilName, "", "€");
                IPS_SetVariableProfileDigits($ProfilName, 3);
                IPS_SetVariableProfileIcon($ProfilName, "Euro");
            }
            IPS_SetVariableCustomProfile($VarID, $ProfilName);
            if ($Logging) {
                $ArchiveHandlerID = IPS_GetInstanceListByModuleID('{43192F0B-135B-4CE7-A0A7-1475603F3060}')[0];
                AC_SetLoggingStatus($ArchiveHandlerID, $VarID, true);
                IPS_ApplyChanges($ArchiveHandlerID);
            }
        }
        IPS_SetName($VarID, $name);
        IPS_SetParent($VarID, $parent);
    }
    SetValue($VarID, $value);
}

	function CreateProfiles() {
		@IPS_CreateVariableProfile("IPSLogger_Level", 1);
		IPS_SetVariableProfileText("IPSLogger_Level", "", "");
		IPS_SetVariableProfileValues("IPSLogger_Level", 0, 0, 0);
		IPS_SetVariableProfileDigits("IPSLogger_Level", 0);
		IPS_SetVariableProfileIcon("IPSLogger_Level", "");
		IPS_SetVariableProfileAssociation("IPSLogger_Level", 0, "Fatal",         "", 0xaaaaaa);
		IPS_SetVariableProfileAssociation("IPSLogger_Level", 1, "Error",         "", 0xaaaaaa);
		IPS_SetVariableProfileAssociation("IPSLogger_Level", 2, "Warning",       "", 0xaaaaaa);
		IPS_SetVariableProfileAssociation("IPSLogger_Level", 3, "Notification",  "", 0xaaaaaa);
		IPS_SetVariableProfileAssociation("IPSLogger_Level", 4, "Info",          "", 0xaaaaaa);
		IPS_SetVariableProfileAssociation("IPSLogger_Level", 5, "Debug",         "", 0xaaaaaa);
		IPS_SetVariableProfileAssociation("IPSLogger_Level", 6, "Communication", "", 0xaaaaaa);
		IPS_SetVariableProfileAssociation("IPSLogger_Level", 7, "Trace",         "", 0xaaaaaa);
		IPS_SetVariableProfileAssociation("IPSLogger_Level", 9, "All",           "", 0xaaaaaa);

		@IPS_CreateVariableProfile("IPSLogger_MsgCount", 1);
		IPS_SetVariableProfileText("IPSLogger_MsgCount", "", " Msg's");
		IPS_SetVariableProfileValues("IPSLogger_MsgCount", 5, 100, 5);
		IPS_SetVariableProfileDigits("IPSLogger_MsgCount", 0);
		IPS_SetVariableProfileIcon("IPSLogger_MsgCount", "");

		@IPS_CreateVariableProfile("IPSLogger_MsgId", 1);
		IPS_SetVariableProfileText("IPSLogger_MsgId", "", "");
		IPS_SetVariableProfileValues("IPSLogger_MsgId", 0, 0, 0);
		IPS_SetVariableProfileDigits("IPSLogger_MsgId", 0);
		IPS_SetVariableProfileIcon("IPSLogger_MsgId", "");

		@IPS_CreateVariableProfile("IPSLogger_Delay", 1);
		IPS_SetVariableProfileText("IPSLogger_Delay", "", " Seconds");
		IPS_SetVariableProfileValues("IPSLogger_Delay", 0, 600, 30);
		IPS_SetVariableProfileDigits("IPSLogger_Delay", 0);
		IPS_SetVariableProfileIcon("IPSLogger_Delay", "");

		@IPS_CreateVariableProfile("IPSLogger_Days", 1);
		IPS_SetVariableProfileText("IPSLogger_Days", "", " Tage");
		IPS_SetVariableProfileValues("IPSLogger_Days", 0, 100, 5);
		IPS_SetVariableProfileDigits("IPSLogger_Days", 0);
		IPS_SetVariableProfileIcon("IPSLogger_Days", "");

		@IPS_CreateVariableProfile("IPSLogger_Priority", 1);
		IPS_SetVariableProfileText("IPSLogger_Priority", "", "");
		IPS_SetVariableProfileValues("IPSLogger_Priority", 0, 10, 1);
		IPS_SetVariableProfileDigits("IPSLogger_Priority", 0);
		IPS_SetVariableProfileIcon("IPSLogger_Priority", "");
	}

 /**
  * Check profile by name if exists, else create
  * @param String $pname Name
  * @param integer $typ Variable Typ (0..3)
  * @param String $prefix Prefix before value
  * @param String $suffix Suffix after value
  * @param String $icon Icon Name
  * @param integer $min min value
  * @param integer $max max value
  * @param integer $step step value
  * @param integer $digit digits for formatting
  * @param boolean $drop drop existing profile first
  */
 protected function check_profile($pname, $typ, $prefix, $suffix, $icon, $min, $max, $step, $digit = 0, $drop = false)
 {
     //use logmessages instead of debug because this isnt available in early stage
     if (IPS_VariableProfileExists($pname) && $drop) {
         IPS_DeleteVariableProfile($pname);
     }
     if (!IPS_VariableProfileExists($pname)) {
         IPS_LogMessage($this->name, __FUNCTION__ . "(#" . $this->InstanceID . ") Create VariableProfile {$pname}");
         if (IPS_CreateVariableProfile($pname, $typ)) {
             IPS_SetVariableProfileText($pname, $prefix, $suffix);
             if (isset($min) && isset($max) && isset($step)) {
                 IPS_SetVariableProfileValues($pname, $min, $max, $step);
             }
             if (isset($digit)) {
                 IPS_SetVariableProfileDigits($pname, $digit);
             }
             if ($icon) {
                 IPS_SetVariableProfileIcon($pname, $icon);
             }
         } else {
             IPS_LogMessage($this->name, __FUNCTION__ . "(#" . $this->InstanceID . ") Cannot Create VariableProfile {$pname}");
         }
     }
 }

	function CreateProfile_Duration ($Name, $Start, $Step, $Stop, $Prefix=" Min", $Icon="") {
	   @IPS_DeleteVariableProfile($Name);
		IPS_CreateVariableProfile($Name, 1);
		IPS_SetVariableProfileText($Name, "", $Prefix);
		IPS_SetVariableProfileValues($Name, $Start, $Stop, $Step);
		IPS_SetVariableProfileDigits($Name, 0);
		IPS_SetVariableProfileIcon($Name, $Icon);
	}