Java IReportVisitor.visitBundle方法代码示例

import org.jacoco.report.IReportVisitor; //导入方法依赖的package包/类
private void createReport(final IBundleCoverage bundleCoverage)
            throws IOException {

        final IReportVisitor visitor = createVisitor(Locale.getDefault());

        // Initialize the report with all of the execution and session
        // information.
        visitor.visitInfo(execFileLoader.getSessionInfoStore().getInfos(),
                          execFileLoader.getExecutionDataStore().getContents());

        // Populate the report structure with the bundle coverage information.
        // Call visitGroup if you need groups in your report.
        visitor.visitBundle(bundleCoverage, new DirectorySourceFileLocator(sourceDirectory, OUTPUT_ENCODING, 4));
//        visitor.visitGroup("AS");

        // Signal end of structure information to allow report to write all
        // information out
        visitor.visitEnd();
    }
 

import org.jacoco.report.IReportVisitor; //导入方法依赖的package包/类
private void createHtmlReport(final IBundleCoverage bundleCoverage)
        throws IOException {

    // Create a concrete report visitor based on some supplied
    // configuration. In this case we use the defaults
    final HTMLFormatter htmlFormatter = new HTMLFormatter();
    final IReportVisitor visitor = htmlFormatter.createVisitor(new FileMultiReportOutput(reportDirectory));

    // Initialize the report with all of the execution and session
    // information. At this point the report doesn't know about the
    // structure of the report being created
    visitor.visitInfo(sessionInfoStore.getInfos(),
            executionDataStore.getContents());

    // Populate the report structure with the bundle coverage information.
    // Call visitGroup if you need groups in your report.
    MultiSourceFileLocator msf = new MultiSourceFileLocator(4);
    for (File file : sourceDirectories) {
        msf.add(new DirectorySourceFileLocator(
                file, "utf-8", 4));
    }

    visitor.visitBundle(bundleCoverage, msf);

    // Signal end of structure information to allow report to write all
    // information out
    visitor.visitEnd();

}
 

import org.jacoco.report.IReportVisitor; //导入方法依赖的package包/类
private void createXmlReport(final IBundleCoverage bundleCoverage)
        throws IOException {

    OutputStream fos = new FileOutputStream(xmlOutput);
    try {
        // Create a concrete report visitor based on some supplied
        // configuration. In this case we use the defaults
        final XMLFormatter htmlFormatter = new XMLFormatter();
        final IReportVisitor visitor = htmlFormatter.createVisitor(fos);

        // Initialize the report with all of the execution and session
        // information. At this point the report doesn't know about the
        // structure of the report being created
        visitor.visitInfo(sessionInfoStore.getInfos(),
                executionDataStore.getContents());

        // Populate the report structure with the bundle coverage information.
        // Call visitGroup if you need groups in your report.
        visitor.visitBundle(bundleCoverage, null);


        // Signal end of structure information to allow report to write all
        // information out
        visitor.visitEnd();
    } finally {
        if (fos != null) {
            fos.close();
        }
    }

}
 

import org.jacoco.report.IReportVisitor; //导入方法依赖的package包/类
private void createReport(final IBundleCoverage bundleCoverage)
		throws IOException {

	// Create a concrete report visitor based on some supplied
	// configuration. In this case we use the defaults
	final HTMLFormatter htmlFormatter = new HTMLFormatter();
	final IReportVisitor visitor = htmlFormatter
			.createVisitor(new FileMultiReportOutput(reportDirectory));



	// Initialize the report with all of the execution and session
	// information. At this point the report doesn't know about the
	// structure of the report being created
	visitor.visitInfo(execFileLoader.getSessionInfoStore().getInfos(),
			execFileLoader.getExecutionDataStore().getContents());

	// Populate the report structure with the bundle coverage information.
	// Call visitGroup if you need groups in your report.
	visitor.visitBundle(bundleCoverage, new DirectorySourceFileLocator(
			sourceDirectory, "utf-8", 4));

	// Signal end of structure information to allow report to write all
	// information out
	visitor.visitEnd();

}
 

import org.jacoco.report.IReportVisitor; //导入方法依赖的package包/类
private void createReport(final IBundleCoverage bundleCoverage)
        throws IOException {

    // Create a concrete report visitor based on some supplied
    // configuration. In this case we use the defaults
    final HTMLFormatter htmlFormatter = new HTMLFormatter();
    final IReportVisitor visitor = htmlFormatter
            .createVisitor(new FileMultiReportOutput(reportDirectory));

    // Initialize the report with all of the execution and session
    // information. At this point the report doesn't know about the
    // structure of the report being created
    visitor.visitInfo(execFileLoader.getSessionInfoStore().getInfos(),
            execFileLoader.getExecutionDataStore().getContents());

    // Populate the report structure with the bundle coverage information.
    // Call visitGroup if you need groups in your report.

    MultiSourceFileLocator locator = new MultiSourceFileLocator(4);
    for (File sourceDirectory : sourceData.getSourceDirectories()) {
        locator.add(new DirectorySourceFileLocator(sourceDirectory, "utf-8", 4));
    }

    visitor.visitBundle(bundleCoverage, locator);

    // Signal end of structure information to allow report to write all
    // information out
    visitor.visitEnd();

}
 

import org.jacoco.report.IReportVisitor; //导入方法依赖的package包/类
@VisibleForTesting
void createReport(
    final IBundleCoverage bundleCoverage, final Map<String, BranchCoverageDetail> branchDetails)
    throws IOException {
  JacocoLCOVFormatter formatter = new JacocoLCOVFormatter(createPathsSet());
  final IReportVisitor visitor = formatter.createVisitor(reportFile, branchDetails);

  // Initialize the report with all of the execution and session information. At this point the
  // report doesn't know about the structure of the report being created.
  visitor.visitInfo(
      execFileLoader.getSessionInfoStore().getInfos(),
      execFileLoader.getExecutionDataStore().getContents());

  // Populate the report structure with the bundle coverage information.
  // Call visitGroup if you need groups in your report.

  // Note the API requires a sourceFileLocator because the HTML and XML formatters display a page
  // of code annotated with coverage information. Having the source files is not actually needed
  // for generating the lcov report...
  visitor.visitBundle(
      bundleCoverage,
      new ISourceFileLocator() {

        @Override
        public Reader getSourceFile(String packageName, String fileName) throws IOException {
          return null;
        }

        @Override
        public int getTabWidth() {
          return 0;
        }
      });

  // Signal end of structure information to allow report to write all information out
  visitor.visitEnd();
}
 

import org.jacoco.report.IReportVisitor; //导入方法依赖的package包/类
/**
 * Load a JaCoCo binary report and convert it to HTML.
 * <br/>See <a href="http://www.eclemma.org/jacoco/trunk/doc/examples/java/ReportGenerator.java">report generator example code</a>.
 *
 * @param jacocoexec the JaCoCo binary report.
 * @param reportdir the folder to store HTML report.
 * @param prjClassesDir the directory containing project's compiled classes.
 * @param prjSourcesDir the directory containing project's Java source files.
 * @param projectName the project's name.
 * @return the absolute path of HTML report's {@code index.html} file.
 * @throws FileNotFoundException if the JaCoCo binary report, compiled classes or Java sources files directory can't be found.
 * @throws IOException if an I/O error occurs.
 */
public static String toHtmlReport(File jacocoexec, File reportdir, File prjClassesDir, File prjSourcesDir, String projectName)
        throws FileNotFoundException,
               IOException {
    // Load the JaCoCo binary report.
    FileInputStream fis = new FileInputStream(jacocoexec);
    ExecutionDataStore executionDataStore = new ExecutionDataStore();
    SessionInfoStore sessionInfoStore = new SessionInfoStore();
    try {
        ExecutionDataReader executionDataReader = new ExecutionDataReader(fis);
        executionDataReader.setExecutionDataVisitor(executionDataStore);
        executionDataReader.setSessionInfoVisitor(sessionInfoStore);
        while (executionDataReader.read()) {
        }
    } finally {
        fis.close();
    }

    // Convert the binary report to HTML.
    CoverageBuilder coverageBuilder = new CoverageBuilder();
    Analyzer analyzer = new Analyzer(executionDataStore, coverageBuilder);
    analyzer.analyzeAll(prjClassesDir);
    IBundleCoverage bundleCoverage = coverageBuilder.getBundle("JaCoCoverage analysis of project \"" + projectName
            + "\" (powered by JaCoCo from EclEmma)");
    HTMLFormatter htmlformatter = new HTMLFormatter();
    IReportVisitor visitor = htmlformatter.createVisitor(new FileMultiReportOutput(reportdir));
    visitor.visitInfo(sessionInfoStore.getInfos(), executionDataStore.getContents());
    visitor.visitBundle(bundleCoverage, new DirectorySourceFileLocator(prjSourcesDir, DEF_ENCODING, 4));
    visitor.visitEnd();
    return new File(reportdir, "index.html").getAbsolutePath();
}
 

import org.jacoco.report.IReportVisitor; //导入方法依赖的package包/类
/**
 * Load a JaCoCo binary report and convert it to XML.
 * <br/>See <a href="http://www.eclemma.org/jacoco/trunk/doc/examples/java/ReportGenerator.java">report generator example code</a>.
 *
 * @param jacocoexec the JaCoCo binary report.
 * @param xmlreport the XML file to generate.
 * @param prjClassesDir the directory containing project's compiled classes.
 * @param prjSourcesDir the directory containing project's Java source files.
 * @throws FileNotFoundException if the JaCoCo binary report, compiled classes or Java sources files directory can't be found.
 * @throws IOException if an I/O error occurs.
 */
public static void toXmlReport(File jacocoexec, File xmlreport, File prjClassesDir, File prjSourcesDir)
        throws FileNotFoundException,
               IOException {
    // Load the JaCoCo binary report.
    FileInputStream fis = new FileInputStream(jacocoexec);
    ExecutionDataStore executionDataStore = new ExecutionDataStore();
    SessionInfoStore sessionInfoStore = new SessionInfoStore();
    try {
        ExecutionDataReader executionDataReader = new ExecutionDataReader(fis);
        executionDataReader.setExecutionDataVisitor(executionDataStore);
        executionDataReader.setSessionInfoVisitor(sessionInfoStore);
        while (executionDataReader.read()) {
        }
    } finally {
        fis.close();
    }

    // Convert the binary report to XML.
    CoverageBuilder coverageBuilder = new CoverageBuilder();
    Analyzer analyzer = new Analyzer(executionDataStore, coverageBuilder);
    analyzer.analyzeAll(prjClassesDir);
    IBundleCoverage bundleCoverage = coverageBuilder.getBundle("JaCoCoverage analysis (powered by JaCoCo from EclEmma)");
    XMLFormatter xmlformatter = new XMLFormatter();
    xmlformatter.setOutputEncoding(DEF_ENCODING);
    IReportVisitor visitor = xmlformatter.createVisitor(new FileOutputStream(xmlreport));
    visitor.visitInfo(sessionInfoStore.getInfos(), executionDataStore.getContents());
    visitor.visitBundle(bundleCoverage, new DirectorySourceFileLocator(prjSourcesDir, DEF_ENCODING, 4));
    visitor.visitEnd();
}
 

import org.jacoco.report.IReportVisitor; //导入方法依赖的package包/类
private void createReport(final IBundleCoverage bundleCoverage)
                throws IOException {

        // Create a concrete report visitor based on some supplied
        // configuration. In this case we use the defaults
        IReportVisitor visitor;
        switch (reportFormat) {
            case "csv":
                reportDirectory.mkdirs();
                CSVFormatter csvFormatter = new CSVFormatter();
                visitor = csvFormatter.createVisitor(
                    new FileOutputStream(new File(reportDirectory, "coverage.csv")));
                break;

            case "html":
                HTMLFormatter htmlFormatter = new HTMLFormatter();
                visitor = htmlFormatter.createVisitor(
                    new FileMultiReportOutput(reportDirectory));
                break;

            case "xml":
                reportDirectory.mkdirs();
                XMLFormatter xmlFormatter = new XMLFormatter();
                visitor = xmlFormatter.createVisitor(
                    new FileOutputStream(new File(reportDirectory, "coverage.xml")));
                break;

            default:
                throw new RuntimeException("Unable to parse format: " + reportFormat);
        }

        // Initialize the report with all of the execution and session
        // information. At this point the report doesn't know about the
        // structure of the report being created
        visitor.visitInfo(execFileLoader.getSessionInfoStore().getInfos(),
                        execFileLoader.getExecutionDataStore().getContents());

        // Populate the report structure with the bundle coverage information.
        // Call visitGroup if you need groups in your report.
        visitor.visitBundle(bundleCoverage, new DirectorySourceFileLocator(
                        sourceDirectory, "utf-8", 4));

        // Signal end of structure information to allow report to write all
        // information out
        visitor.visitEnd();

}
 

import org.jacoco.report.IReportVisitor; //导入方法依赖的package包/类
private void createReport(final IBundleCoverage bundleCoverage) throws IOException {
  Set<String> unknownFormats = Sets.difference(reportFormats, KNOWN_REPORT_FORMATS);
  if (!unknownFormats.isEmpty()) {
    throw new RuntimeException(
        "Unable to parse formats: " + reportFormats.stream().collect(joining(",")));
  }

  // Create a concrete report visitors based on some supplied
  // configuration. In this case we use the defaults
  List<IReportVisitor> visitors = new ArrayList<>();
  if (reportFormats.contains("csv")) {
    reportDirectory.mkdirs();
    CSVFormatter csvFormatter = new CSVFormatter();
    visitors.add(
        csvFormatter.createVisitor(
            new FileOutputStream(new File(reportDirectory, "coverage.csv"))));
  }

  if (reportFormats.contains("html")) {
    HTMLFormatter htmlFormatter = new HTMLFormatter();
    visitors.add(htmlFormatter.createVisitor(new FileMultiReportOutput(reportDirectory)));
  }

  if (reportFormats.contains("xml")) {
    reportDirectory.mkdirs();
    XMLFormatter xmlFormatter = new XMLFormatter();
    visitors.add(
        xmlFormatter.createVisitor(
            new FileOutputStream(new File(reportDirectory, "coverage.xml"))));
  }

  IReportVisitor visitor = new MultiReportVisitor(visitors);
  // Initialize the report with all of the execution and session
  // information. At this point the report doesn't know about the
  // structure of the report being created
  visitor.visitInfo(
      execFileLoader.getSessionInfoStore().getInfos(),
      execFileLoader.getExecutionDataStore().getContents());

  // Populate the report structure with the bundle coverage information.
  // Call visitGroup if you need groups in your report.
  visitor.visitBundle(bundleCoverage, createSourceFileLocator());

  // Signal end of structure information to allow report to write all
  // information out
  visitor.visitEnd();
}
 

import org.jacoco.report.IReportVisitor; //导入方法依赖的package包/类
/**
 * Lets a visitor visit the bundle
 *
 * @param visitor
 *          Visitor to visit the bundle
 * @throws IOException
 */
protected void visit(final IReportVisitor visitor) throws IOException {
  visitor.visitInfo(loader.getSessionInfoStore().getInfos(), loader
      .getExecutionDataStore().getContents());
  visitor.visitBundle(bundle, locator);
  visitor.visitEnd();
}