当前位置: 首页>>代码示例>>Java>>正文


Java InstructionConstants.OP_RET属性代码示例

本文整理汇总了Java中proguard.classfile.instruction.InstructionConstants.OP_RET属性的典型用法代码示例。如果您正苦于以下问题:Java InstructionConstants.OP_RET属性的具体用法?Java InstructionConstants.OP_RET怎么用?Java InstructionConstants.OP_RET使用的例子?那么, 这里精选的属性代码示例或许可以为您提供帮助。您也可以进一步了解该属性所在proguard.classfile.instruction.InstructionConstants的用法示例。


在下文中一共展示了InstructionConstants.OP_RET属性的6个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Java代码示例。

示例1: visitVariableInstruction

public void visitVariableInstruction(Clazz clazz, Method method, CodeAttribute codeAttribute, int offset, VariableInstruction variableInstruction)
{
    // Mark the instruction.
    instructionMarks[offset] |= INSTRUCTION;

    // Check if this is the first instruction of a subroutine.
    checkSubroutine(offset);

    if (variableInstruction.opcode == InstructionConstants.OP_RET)
    {
        // Mark the branch origin.
        markBranchOrigin(offset);

        // Mark the regular subroutine return.
        instructionMarks[offset] |= SUBROUTINE_RETURNING;

        // Mark the next instruction.
        markAfterBranchOrigin(offset + variableInstruction.length(offset));
    }
}
 
开发者ID:tranleduy2000,项目名称:javaide,代码行数:20,代码来源:BranchTargetFinder.java

示例2: visitVariableInstruction

public void visitVariableInstruction(Clazz clazz, Method method, CodeAttribute codeAttribute, int offset, VariableInstruction variableInstruction)
{
    byte opcode = variableInstruction.opcode;

    // The ret instruction end the current instruction block.
    exitInstructionBlock =
        opcode == InstructionConstants.OP_RET;
}
 
开发者ID:tranleduy2000,项目名称:javaide,代码行数:8,代码来源:StackSizeComputer.java

示例3: visitVariableInstruction

public void visitVariableInstruction(Clazz clazz, Method method, CodeAttribute codeAttribute, int offset, VariableInstruction variableInstruction)
{
    byte opcode = variableInstruction.opcode;

    // Check for instructions that might cause side effects.
    if (includeReturnInstructions &&
        opcode == InstructionConstants.OP_RET)
    {
        hasSideEffects = true;
    }
}
 
开发者ID:tranleduy2000,项目名称:javaide,代码行数:11,代码来源:SideEffectInstructionChecker.java

示例4: visitVariableInstruction

public void visitVariableInstruction(Clazz clazz, Method method, CodeAttribute codeAttribute, int offset, VariableInstruction variableInstruction)
{
    if (variableInstruction.opcode == InstructionConstants.OP_RET)
    {
        next = false;
    }
}
 
开发者ID:tranleduy2000,项目名称:javaide,代码行数:7,代码来源:ReachableCodeMarker.java

示例5: visitVariableInstruction

public void visitVariableInstruction(Clazz clazz, Method method, CodeAttribute codeAttribute, int offset, VariableInstruction variableInstruction)
{
    byte opcode = variableInstruction.opcode;
    if (opcode == InstructionConstants.OP_RET)
    {
        // Is the return instruction the last instruction of the subroutine?
        if (branchTargetFinder.subroutineEnd(offset) == offset + variableInstruction.length(offset))
        {
            if (DEBUG)
            {
                System.out.println("    Replacing subroutine return at ["+offset+"] by a label");
            }

            // Append a label at this offset instead of the subroutine return.
            codeAttributeComposer.appendLabel(offset);
        }
        else
        {
            if (DEBUG)
            {
                System.out.println("    Replacing subroutine return at ["+offset+"] by a simple branch");
            }

            // Replace the instruction by a branch.
            Instruction replacementInstruction =
                new BranchInstruction(InstructionConstants.OP_GOTO,
                                      branchTargetFinder.subroutineEnd(offset) - offset).shrink();

            codeAttributeComposer.appendInstruction(offset, replacementInstruction);
        }
    }
    else if (branchTargetFinder.isSubroutineStart(offset))
    {
        if (DEBUG)
        {
            System.out.println("    Replacing first subroutine instruction at ["+offset+"] by a label");
        }

        // Append a label at this offset instead of saving the subroutine
        // return address.
        codeAttributeComposer.appendLabel(offset);
    }
    else
    {
        // Append the instruction.
        codeAttributeComposer.appendInstruction(offset, variableInstruction);
    }
}
 
开发者ID:tranleduy2000,项目名称:javaide,代码行数:48,代码来源:CodeSubroutineInliner.java

示例6: visitVariableInstruction

public void visitVariableInstruction(Clazz clazz, Method method, CodeAttribute codeAttribute, int offset, VariableInstruction variableInstruction)
{
    int variableIndex = variableInstruction.variableIndex;

    switch (variableInstruction.opcode)
    {
        case InstructionConstants.OP_ILOAD:
        case InstructionConstants.OP_ILOAD_0:
        case InstructionConstants.OP_ILOAD_1:
        case InstructionConstants.OP_ILOAD_2:
        case InstructionConstants.OP_ILOAD_3:
            replaceIntegerPushInstruction(clazz, offset, variableInstruction, variableIndex);
            break;

        case InstructionConstants.OP_LLOAD:
        case InstructionConstants.OP_LLOAD_0:
        case InstructionConstants.OP_LLOAD_1:
        case InstructionConstants.OP_LLOAD_2:
        case InstructionConstants.OP_LLOAD_3:
            replaceLongPushInstruction(clazz, offset, variableInstruction, variableIndex);
            break;

        case InstructionConstants.OP_FLOAD:
        case InstructionConstants.OP_FLOAD_0:
        case InstructionConstants.OP_FLOAD_1:
        case InstructionConstants.OP_FLOAD_2:
        case InstructionConstants.OP_FLOAD_3:
            replaceFloatPushInstruction(clazz, offset, variableInstruction, variableIndex);
            break;

        case InstructionConstants.OP_DLOAD:
        case InstructionConstants.OP_DLOAD_0:
        case InstructionConstants.OP_DLOAD_1:
        case InstructionConstants.OP_DLOAD_2:
        case InstructionConstants.OP_DLOAD_3:
            replaceDoublePushInstruction(clazz, offset, variableInstruction, variableIndex);
            break;

        case InstructionConstants.OP_ALOAD:
        case InstructionConstants.OP_ALOAD_0:
        case InstructionConstants.OP_ALOAD_1:
        case InstructionConstants.OP_ALOAD_2:
        case InstructionConstants.OP_ALOAD_3:
            replaceReferencePushInstruction(clazz, offset, variableInstruction);
            break;

        case InstructionConstants.OP_ASTORE:
        case InstructionConstants.OP_ASTORE_0:
        case InstructionConstants.OP_ASTORE_1:
        case InstructionConstants.OP_ASTORE_2:
        case InstructionConstants.OP_ASTORE_3:
            deleteReferencePopInstruction(clazz, offset, variableInstruction);
            break;

        case InstructionConstants.OP_RET:
            replaceBranchInstruction(clazz, offset, variableInstruction);
            break;
    }
}
 
开发者ID:tranleduy2000,项目名称:javaide,代码行数:59,代码来源:EvaluationSimplifier.java


注:本文中的proguard.classfile.instruction.InstructionConstants.OP_RET属性示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。