Java Cue.ANCHOR_TYPE_MIDDLE属性代码示例

private Builder derivePositionAnchorFromAlignment() {
  if (textAlignment == null) {
    positionAnchor = Cue.TYPE_UNSET;
  } else {
    switch (textAlignment) {
      case ALIGN_NORMAL:
        positionAnchor = Cue.ANCHOR_TYPE_START;
        break;
      case ALIGN_CENTER:
        positionAnchor = Cue.ANCHOR_TYPE_MIDDLE;
        break;
      case ALIGN_OPPOSITE:
        positionAnchor = Cue.ANCHOR_TYPE_END;
        break;
      default:
        Log.w(TAG, "Unrecognized alignment: " + textAlignment);
        positionAnchor = Cue.ANCHOR_TYPE_START;
        break;
    }
  }
  return this;
}
 

private static int parsePositionAnchor(String s) {
  switch (s) {
    case "start":
      return Cue.ANCHOR_TYPE_START;
    case "center":
    case "middle":
      return Cue.ANCHOR_TYPE_MIDDLE;
    case "end":
      return Cue.ANCHOR_TYPE_END;
    default:
      Log.w(TAG, "Invalid anchor value: " + s);
      return Cue.TYPE_UNSET;
  }
}
 

public Cea708Cue build() {
  if (isEmpty()) {
    // The cue is empty.
    return null;
  }

  SpannableStringBuilder cueString = new SpannableStringBuilder();

  // Add any rolled up captions, separated by new lines.
  for (int i = 0; i < rolledUpCaptions.size(); i++) {
    cueString.append(rolledUpCaptions.get(i));
    cueString.append('\n');
  }
  // Add the current line.
  cueString.append(buildSpannableString());

  // TODO: Add support for right-to-left languages (i.e. where right would correspond to normal
  // alignment).
  Alignment alignment;
  switch (justification) {
    case JUSTIFICATION_FULL:
      // TODO: Add support for full justification.
    case JUSTIFICATION_LEFT:
      alignment = Alignment.ALIGN_NORMAL;
      break;
    case JUSTIFICATION_RIGHT:
      alignment = Alignment.ALIGN_OPPOSITE;
      break;
    case JUSTIFICATION_CENTER:
      alignment = Alignment.ALIGN_CENTER;
      break;
    default:
      throw new IllegalArgumentException("Unexpected justification value: " + justification);
  }

  float position;
  float line;
  if (relativePositioning) {
    position = (float) horizontalAnchor / RELATIVE_CUE_SIZE;
    line = (float) verticalAnchor / RELATIVE_CUE_SIZE;
  } else {
    position = (float) horizontalAnchor / HORIZONTAL_SIZE;
    line = (float) verticalAnchor / VERTICAL_SIZE;
  }
  // Apply screen-edge padding to the line and position.
  position = (position * 0.9f) + 0.05f;
  line = (line * 0.9f) + 0.05f;

  // anchorId specifies where the anchor should be placed on the caption cue/window. The 9
  // possible configurations are as follows:
  //   0-----1-----2
  //   |           |
  //   3     4     5
  //   |           |
  //   6-----7-----8
  @AnchorType int verticalAnchorType;
  if (anchorId % 3 == 0) {
    verticalAnchorType = Cue.ANCHOR_TYPE_START;
  } else if (anchorId % 3 == 1) {
    verticalAnchorType = Cue.ANCHOR_TYPE_MIDDLE;
  } else {
    verticalAnchorType = Cue.ANCHOR_TYPE_END;
  }
  // TODO: Add support for right-to-left languages (i.e. where start is on the right).
  @AnchorType int horizontalAnchorType;
  if (anchorId / 3 == 0) {
    horizontalAnchorType = Cue.ANCHOR_TYPE_START;
  } else if (anchorId / 3 == 1) {
    horizontalAnchorType = Cue.ANCHOR_TYPE_MIDDLE;
  } else {
    horizontalAnchorType = Cue.ANCHOR_TYPE_END;
  }

  boolean windowColorSet = (windowFillColor != COLOR_SOLID_BLACK);

  return new Cea708Cue(cueString, alignment, line, Cue.LINE_TYPE_FRACTION, verticalAnchorType,
      position, horizontalAnchorType, Cue.DIMEN_UNSET, windowColorSet, windowFillColor,
      priority);
}
 

public Cue build() {
  SpannableStringBuilder cueString = new SpannableStringBuilder();
  // Add any rolled up captions, separated by new lines.
  for (int i = 0; i < rolledUpCaptions.size(); i++) {
    cueString.append(rolledUpCaptions.get(i));
    cueString.append('\n');
  }
  // Add the current line.
  cueString.append(buildSpannableString());

  if (cueString.length() == 0) {
    // The cue is empty.
    return null;
  }

  float position;
  int positionAnchor;
  // The number of empty columns before the start of the text, in the range [0-31].
  int startPadding = indent + tabOffset;
  // The number of empty columns after the end of the text, in the same range.
  int endPadding = SCREEN_CHARWIDTH - startPadding - cueString.length();
  int startEndPaddingDelta = startPadding - endPadding;
  if (captionMode == CC_MODE_POP_ON && Math.abs(startEndPaddingDelta) < 3) {
    // Treat approximately centered pop-on captions are middle aligned.
    position = 0.5f;
    positionAnchor = Cue.ANCHOR_TYPE_MIDDLE;
  } else if (captionMode == CC_MODE_POP_ON && startEndPaddingDelta > 0) {
    // Treat pop-on captions with less padding at the end than the start as end aligned.
    position = (float) (SCREEN_CHARWIDTH - endPadding) / SCREEN_CHARWIDTH;
    // Adjust the position to fit within the safe area.
    position = position * 0.8f + 0.1f;
    positionAnchor = Cue.ANCHOR_TYPE_END;
  } else {
    // For all other cases assume start aligned.
    position = (float) startPadding / SCREEN_CHARWIDTH;
    // Adjust the position to fit within the safe area.
    position = position * 0.8f + 0.1f;
    positionAnchor = Cue.ANCHOR_TYPE_START;
  }

  int lineAnchor;
  int line;
  // Note: Row indices are in the range [1-15].
  if (captionMode == CC_MODE_ROLL_UP || row > (BASE_ROW / 2)) {
    lineAnchor = Cue.ANCHOR_TYPE_END;
    line = row - BASE_ROW;
    // Two line adjustments. The first is because line indices from the bottom of the window
    // start from -1 rather than 0. The second is a blank row to act as the safe area.
    line -= 2;
  } else {
    lineAnchor = Cue.ANCHOR_TYPE_START;
    // Line indices from the top of the window start from 0, but we want a blank row to act as
    // the safe area. As a result no adjustment is necessary.
    line = row;
  }

  return new Cue(cueString, Alignment.ALIGN_NORMAL, line, Cue.LINE_TYPE_NUMBER, lineAnchor,
      position, positionAnchor, Cue.DIMEN_UNSET);
}
 

public Cue build() {
  SpannableStringBuilder cueString = new SpannableStringBuilder();
  // Add any rolled up captions, separated by new lines.
  for (int i = 0; i < rolledUpCaptions.size(); i++) {
    cueString.append(rolledUpCaptions.get(i));
    cueString.append('\n');
  }
  // Add the current line.
  cueString.append(buildSpannableString());

  if (cueString.length() == 0) {
    // The cue is empty.
    return null;
  }

  float position;
  int positionAnchor;
  // The number of empty columns before the start of the text, in the range [0-31].
  int startPadding = indent + tabOffset;
  // The number of empty columns after the end of the text, in the same range.
  int endPadding = SCREEN_CHARWIDTH - startPadding - cueString.length();
  int startEndPaddingDelta = startPadding - endPadding;
  if (captionMode == CC_MODE_POP_ON && (Math.abs(startEndPaddingDelta) < 3 || endPadding < 0)) {
    // Treat approximately centered pop-on captions as middle aligned. We also treat captions
    // that are wider than they should be in this way. See
    // https://github.com/google/ExoPlayer/issues/3534.
    position = 0.5f;
    positionAnchor = Cue.ANCHOR_TYPE_MIDDLE;
  } else if (captionMode == CC_MODE_POP_ON && startEndPaddingDelta > 0) {
    // Treat pop-on captions with less padding at the end than the start as end aligned.
    position = (float) (SCREEN_CHARWIDTH - endPadding) / SCREEN_CHARWIDTH;
    // Adjust the position to fit within the safe area.
    position = position * 0.8f + 0.1f;
    positionAnchor = Cue.ANCHOR_TYPE_END;
  } else {
    // For all other cases assume start aligned.
    position = (float) startPadding / SCREEN_CHARWIDTH;
    // Adjust the position to fit within the safe area.
    position = position * 0.8f + 0.1f;
    positionAnchor = Cue.ANCHOR_TYPE_START;
  }

  int lineAnchor;
  int line;
  // Note: Row indices are in the range [1-15].
  if (captionMode == CC_MODE_ROLL_UP || row > (BASE_ROW / 2)) {
    lineAnchor = Cue.ANCHOR_TYPE_END;
    line = row - BASE_ROW;
    // Two line adjustments. The first is because line indices from the bottom of the window
    // start from -1 rather than 0. The second is a blank row to act as the safe area.
    line -= 2;
  } else {
    lineAnchor = Cue.ANCHOR_TYPE_START;
    // Line indices from the top of the window start from 0, but we want a blank row to act as
    // the safe area. As a result no adjustment is necessary.
    line = row;
  }

  return new Cue(cueString, Alignment.ALIGN_NORMAL, line, Cue.LINE_TYPE_NUMBER, lineAnchor,
      position, positionAnchor, Cue.DIMEN_UNSET);
}