Java Intent.ACTION_DEVICE_STORAGE_LOW属性代码示例

@SuppressWarnings("deprecation")
public static void setStorageNotLow(Context context, boolean storageNotLow) {
    Intent storageLowIntent = new Intent(Intent.ACTION_DEVICE_STORAGE_LOW);
    if (storageNotLow) {
        context.removeStickyBroadcast(storageLowIntent);
    } else {
        context.sendStickyBroadcast(storageLowIntent);
    }
}
 

private void createCameraSource() {

        // Create the TextRecognizer
        TextRecognizer textRecognizer = new TextRecognizer.Builder(getContext()).build();
        SearchResultHandler searchResultHandler = new SearchResultHandler(getContext(), mPreferenceManager, getResources().getStringArray(R.array.pin_colors));

        // Set the TextRecognizer's Processor.
        OcrDetectorProcessor ocrDetectorProcessor = new OcrDetectorProcessor(
                mOcrGraphicOverlay,
                mMaskView,
                mPreferenceManager,
                searchResultHandler,
                mScanPresenter);
        textRecognizer.setProcessor(ocrDetectorProcessor);
        mScanPresenter.setProcessor(ocrDetectorProcessor);

        // Check if the TextRecognizer is operational.
        if (!textRecognizer.isOperational()) {
            Log.w(TAG, "Detector dependencies are not yet available.");

            // Check for low storage.  If there is low storage, the native library will not be
            // downloaded, so detection will not become operational.
            IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
            boolean hasLowStorage = getActivity().registerReceiver(null, lowstorageFilter) != null;

            if (hasLowStorage) {
                Toast.makeText(getContext(), R.string.low_storage_error, Toast.LENGTH_LONG).show();
                Log.w(TAG, getString(R.string.low_storage_error));
            }
        }

        // Create the mCameraSource using the TextRecognizer.
        mCameraSource = new CameraSource.Builder(getContext(), textRecognizer)
                .setFacing(CameraSource.CAMERA_FACING_BACK)
                .setRequestedPreviewSize(1280, 1024)
                .setRequestedFps(15.0f)
//                .setFlashMode(Camera.Parameters.FLASH_MODE_TORCH)
                .setFocusMode(Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE)
                .build();
    }
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the ocr detector to detect small text samples
 * at long distances.
 *
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Context context = getApplicationContext();

    // A text recognizer is created to find text.  An associated multi-processor instance
    // is set to receive the text recognition results, track the text, and maintain
    // graphics for each text block on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each text block.
    TextRecognizer textRecognizer = new TextRecognizer.Builder(context).build();
    textRecognizer.setProcessor(new OcrDetectorProcessor(mGraphicOverlay, this));

    if (!textRecognizer.isOperational()) {
        // Note: The first time that an app using a Vision API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any text,
        // barcodes, or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, R.string.low_storage_error, Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.low_storage_error));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the text recognizer to detect small pieces of text.
    mCameraSource =
            new CameraSource.Builder(getApplicationContext(), textRecognizer)
                    .setFacing(CameraSource.CAMERA_FACING_BACK)
                    .setRequestedPreviewSize(1280, 1024)
                    .setRequestedFps(2.0f)
                    .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
                    .setFocusMode(autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null)
                    .build();
}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the ocr detector to detect small text samples
 * at long distances.
 *
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Context context = getApplicationContext();

    // A text recognizer is created to find text.  An associated processor instance
    // is set to receive the text recognition results and display graphics for each text block
    // on screen.
    TextRecognizer textRecognizer = new TextRecognizer.Builder(context).build();
    textRecognizer.setProcessor(new OcrDetectorProcessor(mGraphicOverlay));

    if (!textRecognizer.isOperational()) {
        // Note: The first time that an app using a Vision API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any text,
        // barcodes, or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, R.string.low_storage_error, Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.low_storage_error));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the text recognizer to detect small pieces of text.
    mCameraSource =
            new CameraSource.Builder(getApplicationContext(), textRecognizer)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(1280, 1024)
            .setRequestedFps(2.0f)
            .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
            .setFocusMode(autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null)
            .build();
}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the ocr detector to detect small text samples
 * at long distances.
 *
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Context context = getApplicationContext();

    // A text recognizer is created to find text.  An associated multi-processor instance
    // is set to receive the text recognition results, track the text, and maintain
    // graphics for each text block on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each text block.
    TextRecognizer textRecognizer = new TextRecognizer.Builder(context).build();
    textRecognizer.setProcessor(new OcrDetectorProcessor(mGraphicOverlay));

    if (!textRecognizer.isOperational()) {
        // Note: The first time that an app using a Vision API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any text,
        // barcodes, or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, R.string.low_storage_error, Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.low_storage_error));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the text recognizer to detect small pieces of text.
    mCameraSource =
            new CameraSource.Builder(getApplicationContext(), textRecognizer)
                    .setFacing(CameraSource.CAMERA_FACING_BACK)
                    .setRequestedPreviewSize(1280, 1024)
                    .setRequestedFps(2.0f)
                    .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
                    .setFocusMode(autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null)
                    .build();
}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the ocr detector to detect small text samples
 * at long distances.
 * <p>
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Context context = getApplicationContext();

    // A text recognizer is created to find text.  An associated multi-processor instance
    // is set to receive the text recognition results, track the text, and maintain
    // graphics for each text block on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each text block.
    textRecognizer = new TextRecognizer.Builder(context).build();
    textRecognizer.setProcessor(new OcrDetectorProcessor(mGraphicOverlay, this));
    // A face detector is created to track faces.  An associated multi-processor instance
    // is set to receive the face detection results, track the faces, and maintain graphics for
    // each face on screen.  The factory is used by the multi-processor to create a separate
    // tracker instance for each face.
    FaceDetector faceDetector = new FaceDetector.Builder(context).build();
    FaceTrackerFactory faceFactory = new FaceTrackerFactory(mGraphicOverlay, this);
    faceDetector.setProcessor(
            new MultiProcessor.Builder<>(faceFactory).build());

    // A multi-detector groups the two detectors together as one detector.  All images received
    // by this detector from the camera will be sent to each of the underlying detectors, which
    // will each do face and barcode detection, respectively.  The detection results from each
    // are then sent to associated tracker instances which maintain per-item graphics on the
    // screen.
    multiDetector = new MultiDetector.Builder()
            .add(faceDetector)
            .add(textRecognizer)
            .build();


    if (!multiDetector.isOperational()) {
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, R.string.low_storage_error, Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.low_storage_error));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the text recognizer to detect small pieces of text.
    mCameraSource =
            new CameraSource.Builder(getApplicationContext(), multiDetector)
                    .setFacing(CameraSource.CAMERA_FACING_BACK)
                    .setRequestedPreviewSize(1600, 1024)
                    .setRequestedFps(2.0f)
                    .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
                    .setFocusMode(autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null)
                    .build();
}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the ocr detector to detect small text samples
 * at long distances.
 *
 * Suppressing InlinedApi since there is a icon_save that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource() {
    Context context = getApplicationContext();

    // A text recognizer is created to find text.  An associated processor instance
    // is set to receive the text recognition results and display graphics for each text block
    // on screen.
    TextRecognizer textRecognizer = new TextRecognizer.Builder(context).build();
    textRecognizer.setProcessor(new OcrDetectorProcessor(mGraphicOverlay, this));

    if (!textRecognizer.isOperational()) {
        // Note: The first time that an app using a Vision API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any text,
        // barcodes, or faces.
        //
        // isOperational() can be used to icon_save if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, R.string.low_storage_error, Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.low_storage_error));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the text recognizer to detect small pieces of text.
    mCameraSource =
            new CameraSource.Builder(getApplicationContext(), textRecognizer)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(1280, 1024)
            .setRequestedFps(2.0f)
            .setFocusMode(Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE)
            .build();
}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the barcode detector to detect small barcodes
 * at long distances.
 * <p>
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Context context = getApplicationContext();

    // A barcode detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode detection results, track the barcodes, and maintain
    // graphics for each barcode on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode.
    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context)
            .build();

    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(mGraphicOverlay, this);
    barcodeDetector.setProcessor(
            new MultiProcessor.Builder<>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, R.string.low_storage_error, Toast.LENGTH_LONG).show();
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode detector to detect small barcodes
    // at long distances.
    CameraSource.Builder builder = new CameraSource.Builder(getApplicationContext(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(1600, 1024)
            .setRequestedFps(15.0f);

    // make sure that auto focus is an available option
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) {
        builder = builder.setFocusMode(
                autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null);
    }

    mCameraSource = builder
            .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
            .build();

}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the barcode detector to detect small barcodes
 * at long distances.
 * <p>
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Log.e(TAG, "createCameraSource:");
    Context context = getActivity();

    // A barcode detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode detection results, track the barcodes, and maintain
    // graphics for each barcode on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode.
    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context).build();
    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(mGraphicOverlay, this);
    barcodeDetector.setProcessor(
            new MultiProcessor.Builder<>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = getActivity().registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(getActivity(), R.string.low_storage_error, Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.low_storage_error));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode detector to detect small barcodes
    // at long distances.
    CameraSource.Builder builder = new CameraSource.Builder(getActivity(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(1600, 1024)
            .setRequestedFps(15.0f);

    // make sure that auto focus is an available option
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) {
        builder = builder.setFocusMode(
                autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null);
    }

    mCameraSource = builder
            .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
            .build();
}
 

/**
 * Creates and starts the camera.
 *
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus, boolean useFlash) {
    Context context = getApplicationContext();

    // A barcode_capture detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode_capture detection results, track the barcodes, and maintain
    // graphics for each barcode_capture on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode_capture.
    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context)
            .setBarcodeFormats(Barcode.ALL_FORMATS)
            .build();
    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(this);
    barcodeDetector.setProcessor(new MultiProcessor.Builder<>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode_capture or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, R.string.low_storage_error,
                    Toast.LENGTH_LONG).show();
            Log.w(TAG, getString(R.string.low_storage_error));
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode_capture detector to detect small barcodes
    // at long distances.
    DisplayMetrics metrics = new DisplayMetrics();
    getWindowManager().getDefaultDisplay().getMetrics(metrics);

    CameraSource.Builder builder = new CameraSource.Builder(getApplicationContext(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(metrics.widthPixels, metrics.heightPixels)
            .setRequestedFps(24.0f);

    // make sure that auto focus is an available option
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) {
        builder = builder.setFocusMode(
                autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_PICTURE : null);
    }

    mCameraSource = builder
            .setFlashMode(useFlash ? Camera.Parameters.FLASH_MODE_TORCH : null)
            .build();
}
 

/**
 * Creates and starts the camera.  Note that this uses a higher resolution in comparison
 * to other detection examples to enable the barcode detector to detect small barcodes
 * at long distances.
 *
 * Suppressing InlinedApi since there is a check that the minimum version is met before using
 * the constant.
 */
@SuppressLint("InlinedApi")
private void createCameraSource(boolean autoFocus) {
    Context context = getApplicationContext();

    // A barcode detector is created to track barcodes.  An associated multi-processor instance
    // is set to receive the barcode detection results, track the barcodes, and maintain
    // graphics for each barcode on screen.  The factory is used by the multi-processor to
    // create a separate tracker instance for each barcode.
    BarcodeDetector barcodeDetector = new BarcodeDetector.Builder(context).build();
    BarcodeTrackerFactory barcodeFactory = new BarcodeTrackerFactory(mGraphicOverlay,this);
    barcodeDetector.setProcessor(
            new MultiProcessor.Builder<Barcode>(barcodeFactory).build());

    if (!barcodeDetector.isOperational()) {
        // Note: The first time that an app using the barcode or face API is installed on a
        // device, GMS will download a native libraries to the device in order to do detection.
        // Usually this completes before the app is run for the first time.  But if that
        // download has not yet completed, then the above call will not detect any barcodes
        // and/or faces.
        //
        // isOperational() can be used to check if the required native libraries are currently
        // available.  The detectors will automatically become operational once the library
        // downloads complete on device.
        Log.w(TAG, "Detector dependencies are not yet available.");

        // Check for low storage.  If there is low storage, the native library will not be
        // downloaded, so detection will not become operational.
        IntentFilter lowstorageFilter = new IntentFilter(Intent.ACTION_DEVICE_STORAGE_LOW);
        boolean hasLowStorage = registerReceiver(null, lowstorageFilter) != null;

        if (hasLowStorage) {
            Toast.makeText(this, "Face detector dependencies cannot be downloaded due to low device storage", Toast.LENGTH_LONG).show();
            Log.w(TAG, "Face detector dependencies cannot be downloaded due to low device storage");
        }
    }

    // Creates and starts the camera.  Note that this uses a higher resolution in comparison
    // to other detection examples to enable the barcode detector to detect small barcodes
    // at long distances.
    CameraSource.Builder builder = new CameraSource.Builder(getApplicationContext(), barcodeDetector)
            .setFacing(CameraSource.CAMERA_FACING_BACK)
            .setRequestedPreviewSize(1600, 960)
            .setRequestedFps(15.0f);

    // make sure that auto focus is an available option
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.ICE_CREAM_SANDWICH) {
        builder = builder.setFocusMode(
                autoFocus ? Camera.Parameters.FOCUS_MODE_CONTINUOUS_VIDEO : null);
    }

    mCameraSource = builder.build();

}