当前位置: 首页>>代码示例>>Golang>>正文


Golang Connection.Close方法代码示例

本文整理汇总了Golang中v2ray/com/core/transport/internet.Connection.Close方法的典型用法代码示例。如果您正苦于以下问题:Golang Connection.Close方法的具体用法?Golang Connection.Close怎么用?Golang Connection.Close使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在v2ray/com/core/transport/internet.Connection的用法示例。


在下文中一共展示了Connection.Close方法的13个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。

示例1: handleConnection

func (v *Server) handleConnection(connection internet.Connection) {
	defer connection.Close()

	timedReader := v2net.NewTimeOutReader(v.config.Timeout, connection)
	reader := bufio.NewReader(timedReader)
	defer reader.Release()

	writer := bufio.NewWriter(connection)
	defer writer.Release()

	auth, auth4, err := protocol.ReadAuthentication(reader)
	if err != nil && errors.Cause(err) != protocol.Socks4Downgrade {
		if errors.Cause(err) != io.EOF {
			log.Warning("Socks: failed to read authentication: ", err)
		}
		return
	}

	clientAddr := v2net.DestinationFromAddr(connection.RemoteAddr())
	if err != nil && err == protocol.Socks4Downgrade {
		v.handleSocks4(clientAddr, reader, writer, auth4)
	} else {
		v.handleSocks5(clientAddr, reader, writer, auth)
	}
}
开发者ID:v2ray,项目名称:v2ray-core,代码行数:25,代码来源:server.go

示例2: Dispatch

func (this *FreedomConnection) Dispatch(destination v2net.Destination, payload *alloc.Buffer, ray ray.OutboundRay) error {
	log.Info("Freedom: Opening connection to ", destination)

	defer payload.Release()
	defer ray.OutboundInput().Release()
	defer ray.OutboundOutput().Close()

	var conn internet.Connection
	if this.domainStrategy == Config_USE_IP && destination.Address.Family().IsDomain() {
		destination = this.ResolveIP(destination)
	}
	err := retry.ExponentialBackoff(5, 100).On(func() error {
		rawConn, err := internet.Dial(this.meta.Address, destination, this.meta.GetDialerOptions())
		if err != nil {
			return err
		}
		conn = rawConn
		return nil
	})
	if err != nil {
		log.Warning("Freedom: Failed to open connection to ", destination, ": ", err)
		return err
	}
	defer conn.Close()

	input := ray.OutboundInput()
	output := ray.OutboundOutput()

	if !payload.IsEmpty() {
		conn.Write(payload.Value)
	}

	go func() {
		v2writer := v2io.NewAdaptiveWriter(conn)
		defer v2writer.Release()

		v2io.Pipe(input, v2writer)
		if tcpConn, ok := conn.(*tcp.RawConnection); ok {
			tcpConn.CloseWrite()
		}
	}()

	var reader io.Reader = conn

	timeout := this.timeout
	if destination.Network == v2net.Network_UDP {
		timeout = 16
	}
	if timeout > 0 {
		reader = v2net.NewTimeOutReader(timeout /* seconds */, conn)
	}

	v2reader := v2io.NewAdaptiveReader(reader)
	v2io.Pipe(v2reader, output)
	v2reader.Release()
	ray.OutboundOutput().Close()

	return nil
}
开发者ID:xyz12810,项目名称:v2ray-core,代码行数:59,代码来源:freedom.go

示例3: Dispatch

func (this *VMessOutboundHandler) Dispatch(target v2net.Destination, payload *alloc.Buffer, ray ray.OutboundRay) error {
	defer ray.OutboundInput().Release()
	defer ray.OutboundOutput().Close()

	var rec *protocol.ServerSpec
	var conn internet.Connection

	err := retry.Timed(5, 100).On(func() error {
		rec = this.serverPicker.PickServer()
		rawConn, err := internet.Dial(this.meta.Address, rec.Destination(), this.meta.StreamSettings)
		if err != nil {
			return err
		}
		conn = rawConn

		return nil
	})
	if err != nil {
		log.Error("VMess|Outbound: Failed to find an available destination:", err)
		return err
	}
	log.Info("VMess|Outbound: Tunneling request to ", target, " via ", rec.Destination())

	command := protocol.RequestCommandTCP
	if target.IsUDP() {
		command = protocol.RequestCommandUDP
	}
	request := &protocol.RequestHeader{
		Version: encoding.Version,
		User:    rec.PickUser(),
		Command: command,
		Address: target.Address(),
		Port:    target.Port(),
		Option:  protocol.RequestOptionChunkStream,
	}

	defer conn.Close()

	conn.SetReusable(true)
	if conn.Reusable() { // Conn reuse may be disabled on transportation layer
		request.Option.Set(protocol.RequestOptionConnectionReuse)
	}

	input := ray.OutboundInput()
	output := ray.OutboundOutput()

	var requestFinish, responseFinish sync.Mutex
	requestFinish.Lock()
	responseFinish.Lock()

	session := encoding.NewClientSession(protocol.DefaultIDHash)

	go this.handleRequest(session, conn, request, payload, input, &requestFinish)
	go this.handleResponse(session, conn, request, rec.Destination(), output, &responseFinish)

	requestFinish.Lock()
	responseFinish.Lock()
	return nil
}
开发者ID:DZLZHCODE,项目名称:v2ray-core,代码行数:59,代码来源:outbound.go

示例4: HandleTCPConnection

func (v *DokodemoDoor) HandleTCPConnection(conn internet.Connection) {
	defer conn.Close()

	var dest v2net.Destination
	if v.config.FollowRedirect {
		originalDest := GetOriginalDestination(conn)
		if originalDest.Network != v2net.Network_Unknown {
			log.Info("Dokodemo: Following redirect to: ", originalDest)
			dest = originalDest
		}
	}
	if dest.Network == v2net.Network_Unknown && v.address != nil && v.port > v2net.Port(0) {
		dest = v2net.TCPDestination(v.address, v.port)
	}

	if dest.Network == v2net.Network_Unknown {
		log.Info("Dokodemo: Unknown destination, stop forwarding...")
		return
	}
	log.Info("Dokodemo: Handling request to ", dest)

	ray := v.packetDispatcher.DispatchToOutbound(&proxy.SessionInfo{
		Source:      v2net.DestinationFromAddr(conn.RemoteAddr()),
		Destination: dest,
		Inbound:     v.meta,
	})
	defer ray.InboundOutput().Release()

	var wg sync.WaitGroup

	reader := v2net.NewTimeOutReader(v.config.Timeout, conn)
	defer reader.Release()

	wg.Add(1)
	go func() {
		v2reader := buf.NewReader(reader)
		defer v2reader.Release()

		if err := buf.PipeUntilEOF(v2reader, ray.InboundInput()); err != nil {
			log.Info("Dokodemo: Failed to transport all TCP request: ", err)
		}
		wg.Done()
		ray.InboundInput().Close()
	}()

	wg.Add(1)
	go func() {
		v2writer := buf.NewWriter(conn)
		defer v2writer.Release()

		if err := buf.PipeUntilEOF(ray.InboundOutput(), v2writer); err != nil {
			log.Info("Dokodemo: Failed to transport all TCP response: ", err)
		}
		wg.Done()
	}()

	wg.Wait()
}
开发者ID:v2ray,项目名称:v2ray-core,代码行数:58,代码来源:dokodemo.go

示例5: HandleTCPConnection

func (this *DokodemoDoor) HandleTCPConnection(conn internet.Connection) {
	defer conn.Close()

	var dest v2net.Destination
	if this.config.FollowRedirect {
		originalDest := GetOriginalDestination(conn)
		if originalDest.Network != v2net.Network_Unknown {
			log.Info("Dokodemo: Following redirect to: ", originalDest)
			dest = originalDest
		}
	}
	if dest.Network == v2net.Network_Unknown && this.address != nil && this.port > v2net.Port(0) {
		dest = v2net.TCPDestination(this.address, this.port)
	}

	if dest.Network == v2net.Network_Unknown {
		log.Info("Dokodemo: Unknown destination, stop forwarding...")
		return
	}
	log.Info("Dokodemo: Handling request to ", dest)

	ray := this.packetDispatcher.DispatchToOutbound(&proxy.SessionInfo{
		Source:      v2net.DestinationFromAddr(conn.RemoteAddr()),
		Destination: dest,
		Inbound:     this.meta,
	})
	defer ray.InboundOutput().Release()

	var wg sync.WaitGroup

	reader := v2net.NewTimeOutReader(this.config.Timeout, conn)
	defer reader.Release()

	wg.Add(1)
	go func() {
		v2reader := v2io.NewAdaptiveReader(reader)
		defer v2reader.Release()

		v2io.Pipe(v2reader, ray.InboundInput())
		wg.Done()
		ray.InboundInput().Close()
	}()

	wg.Add(1)
	go func() {
		v2writer := v2io.NewAdaptiveWriter(conn)
		defer v2writer.Release()

		v2io.Pipe(ray.InboundOutput(), v2writer)
		wg.Done()
	}()

	wg.Wait()
}
开发者ID:xyz12810,项目名称:v2ray-core,代码行数:54,代码来源:dokodemo.go

示例6: callback

func (w *tcpWorker) callback(conn internet.Connection) {
	ctx, cancel := context.WithCancel(w.ctx)
	if w.recvOrigDest {
		dest := tcp.GetOriginalDestination(conn)
		if dest.IsValid() {
			ctx = proxy.ContextWithOriginalDestination(ctx, dest)
		}
	}
	if len(w.tag) > 0 {
		ctx = proxy.ContextWithInboundTag(ctx, w.tag)
	}
	ctx = proxy.ContextWithAllowPassiveConnection(ctx, w.allowPassiveConn)
	ctx = proxy.ContextWithInboundDestination(ctx, v2net.TCPDestination(w.address, w.port))
	w.proxy.Process(ctx, v2net.Network_TCP, conn)
	cancel()
	conn.Close()
}
开发者ID:ylywyn,项目名称:v2ray-core,代码行数:17,代码来源:worker.go

示例7: handleConnection

func (this *Server) handleConnection(conn internet.Connection) {
	defer conn.Close()
	timedReader := v2net.NewTimeOutReader(this.config.Timeout, conn)
	reader := bufio.NewReaderSize(timedReader, 2048)

	request, err := http.ReadRequest(reader)
	if err != nil {
		if err != io.EOF {
			log.Warning("HTTP: Failed to read http request: ", err)
		}
		return
	}
	log.Info("HTTP: Request to Method [", request.Method, "] Host [", request.Host, "] with URL [", request.URL, "]")
	defaultPort := v2net.Port(80)
	if strings.ToLower(request.URL.Scheme) == "https" {
		defaultPort = v2net.Port(443)
	}
	host := request.Host
	if len(host) == 0 {
		host = request.URL.Host
	}
	dest, err := parseHost(host, defaultPort)
	if err != nil {
		log.Warning("HTTP: Malformed proxy host (", host, "): ", err)
		return
	}
	log.Access(conn.RemoteAddr(), request.URL, log.AccessAccepted, "")
	session := &proxy.SessionInfo{
		Source:      v2net.DestinationFromAddr(conn.RemoteAddr()),
		Destination: dest,
		Inbound:     this.meta,
	}
	if strings.ToUpper(request.Method) == "CONNECT" {
		this.handleConnect(request, session, reader, conn)
	} else {
		this.handlePlainHTTP(request, session, reader, conn)
	}
}
开发者ID:xyz12810,项目名称:v2ray-core,代码行数:38,代码来源:server.go

示例8: HandleConnection

func (this *VMessInboundHandler) HandleConnection(connection internet.Connection) {
	defer connection.Close()

	if !this.accepting {
		return
	}

	connReader := v2net.NewTimeOutReader(8, connection)
	defer connReader.Release()

	reader := v2io.NewBufferedReader(connReader)
	defer reader.Release()

	this.RLock()
	if !this.accepting {
		this.RUnlock()
		return
	}
	session := encoding.NewServerSession(this.clients)
	defer session.Release()

	request, err := session.DecodeRequestHeader(reader)
	this.RUnlock()

	if err != nil {
		if err != io.EOF {
			log.Access(connection.RemoteAddr(), "", log.AccessRejected, err)
			log.Warning("VMessIn: Invalid request from ", connection.RemoteAddr(), ": ", err)
		}
		connection.SetReusable(false)
		return
	}
	log.Access(connection.RemoteAddr(), request.Destination(), log.AccessAccepted, "")
	log.Info("VMessIn: Received request for ", request.Destination())

	connection.SetReusable(request.Option.Has(protocol.RequestOptionConnectionReuse))

	ray := this.packetDispatcher.DispatchToOutbound(this.meta, &proxy.SessionInfo{
		Source:      v2net.DestinationFromAddr(connection.RemoteAddr()),
		Destination: request.Destination(),
	})
	input := ray.InboundInput()
	output := ray.InboundOutput()
	defer input.Close()
	defer output.Release()

	var readFinish sync.Mutex
	readFinish.Lock()

	userSettings := protocol.GetUserSettings(request.User.Level)
	connReader.SetTimeOut(userSettings.PayloadReadTimeout)
	reader.SetCached(false)

	go func() {
		bodyReader := session.DecodeRequestBody(reader)
		var requestReader v2io.Reader
		if request.Option.Has(protocol.RequestOptionChunkStream) {
			requestReader = vmessio.NewAuthChunkReader(bodyReader)
		} else {
			requestReader = v2io.NewAdaptiveReader(bodyReader)
		}
		err := v2io.Pipe(requestReader, input)
		if err != io.EOF {
			connection.SetReusable(false)
		}

		requestReader.Release()
		input.Close()
		readFinish.Unlock()
	}()

	writer := v2io.NewBufferedWriter(connection)
	defer writer.Release()

	response := &protocol.ResponseHeader{
		Command: this.generateCommand(request),
	}

	if connection.Reusable() {
		response.Option.Set(protocol.ResponseOptionConnectionReuse)
	}

	session.EncodeResponseHeader(response, writer)

	bodyWriter := session.EncodeResponseBody(writer)
	var v2writer v2io.Writer = v2io.NewAdaptiveWriter(bodyWriter)
	if request.Option.Has(protocol.RequestOptionChunkStream) {
		v2writer = vmessio.NewAuthChunkWriter(v2writer)
	}

	// Optimize for small response packet
	if data, err := output.Read(); err == nil {
		if err := v2writer.Write(data); err != nil {
			connection.SetReusable(false)
		}

		writer.SetCached(false)

		err = v2io.Pipe(output, v2writer)
		if err != io.EOF {
//.........这里部分代码省略.........
开发者ID:DZLZHCODE,项目名称:v2ray-core,代码行数:101,代码来源:inbound.go

示例9: handleConnection

func (this *Server) handleConnection(conn internet.Connection) {
	defer conn.Close()

	buffer := alloc.NewSmallBuffer()
	defer buffer.Release()

	timedReader := v2net.NewTimeOutReader(16, conn)
	defer timedReader.Release()

	bufferedReader := v2io.NewBufferedReader(timedReader)
	defer bufferedReader.Release()

	ivLen := this.config.Cipher.IVSize()
	_, err := io.ReadFull(bufferedReader, buffer.Value[:ivLen])
	if err != nil {
		if err != io.EOF {
			log.Access(conn.RemoteAddr(), "", log.AccessRejected, err)
			log.Warning("Shadowsocks: Failed to read IV: ", err)
		}
		return
	}

	iv := buffer.Value[:ivLen]
	key := this.config.Key

	stream, err := this.config.Cipher.NewDecodingStream(key, iv)
	if err != nil {
		log.Error("Shadowsocks: Failed to create decoding stream: ", err)
		return
	}

	reader := crypto.NewCryptionReader(stream, bufferedReader)

	request, err := ReadRequest(reader, NewAuthenticator(HeaderKeyGenerator(key, iv)), false)
	if err != nil {
		log.Access(conn.RemoteAddr(), "", log.AccessRejected, err)
		log.Warning("Shadowsocks: Invalid request from ", conn.RemoteAddr(), ": ", err)
		return
	}
	defer request.Release()
	bufferedReader.SetCached(false)

	userSettings := protocol.GetUserSettings(this.config.Level)
	timedReader.SetTimeOut(userSettings.PayloadReadTimeout)

	dest := v2net.TCPDestination(request.Address, request.Port)
	log.Access(conn.RemoteAddr(), dest, log.AccessAccepted, "")
	log.Info("Shadowsocks: Tunnelling request to ", dest)

	ray := this.packetDispatcher.DispatchToOutbound(this.meta, &proxy.SessionInfo{
		Source:      v2net.DestinationFromAddr(conn.RemoteAddr()),
		Destination: dest,
	})
	defer ray.InboundOutput().Release()

	var writeFinish sync.Mutex
	writeFinish.Lock()
	go func() {
		if payload, err := ray.InboundOutput().Read(); err == nil {
			payload.SliceBack(ivLen)
			rand.Read(payload.Value[:ivLen])

			stream, err := this.config.Cipher.NewEncodingStream(key, payload.Value[:ivLen])
			if err != nil {
				log.Error("Shadowsocks: Failed to create encoding stream: ", err)
				return
			}
			stream.XORKeyStream(payload.Value[ivLen:], payload.Value[ivLen:])

			conn.Write(payload.Value)
			payload.Release()

			writer := crypto.NewCryptionWriter(stream, conn)
			v2writer := v2io.NewAdaptiveWriter(writer)

			v2io.Pipe(ray.InboundOutput(), v2writer)
			writer.Release()
			v2writer.Release()
		}
		writeFinish.Unlock()
	}()

	var payloadReader v2io.Reader
	if request.OTA {
		payloadAuth := NewAuthenticator(ChunkKeyGenerator(iv))
		payloadReader = NewChunkReader(reader, payloadAuth)
	} else {
		payloadReader = v2io.NewAdaptiveReader(reader)
	}

	v2io.Pipe(payloadReader, ray.InboundInput())
	ray.InboundInput().Close()
	payloadReader.Release()

	writeFinish.Lock()
}
开发者ID:DZLZHCODE,项目名称:v2ray-core,代码行数:96,代码来源:server.go

示例10: Dispatch

func (v *VMessOutboundHandler) Dispatch(target v2net.Destination, payload *buf.Buffer, ray ray.OutboundRay) {
	defer ray.OutboundInput().Release()
	defer ray.OutboundOutput().Close()

	var rec *protocol.ServerSpec
	var conn internet.Connection

	err := retry.ExponentialBackoff(5, 100).On(func() error {
		rec = v.serverPicker.PickServer()
		rawConn, err := internet.Dial(v.meta.Address, rec.Destination(), v.meta.GetDialerOptions())
		if err != nil {
			return err
		}
		conn = rawConn

		return nil
	})
	if err != nil {
		log.Warning("VMess|Outbound: Failed to find an available destination:", err)
		return
	}
	log.Info("VMess|Outbound: Tunneling request to ", target, " via ", rec.Destination())

	command := protocol.RequestCommandTCP
	if target.Network == v2net.Network_UDP {
		command = protocol.RequestCommandUDP
	}
	request := &protocol.RequestHeader{
		Version: encoding.Version,
		User:    rec.PickUser(),
		Command: command,
		Address: target.Address,
		Port:    target.Port,
		Option:  protocol.RequestOptionChunkStream,
	}

	rawAccount, err := request.User.GetTypedAccount()
	if err != nil {
		log.Warning("VMess|Outbound: Failed to get user account: ", err)
	}
	account := rawAccount.(*vmess.InternalAccount)
	request.Security = account.Security

	defer conn.Close()

	conn.SetReusable(true)
	if conn.Reusable() { // Conn reuse may be disabled on transportation layer
		request.Option.Set(protocol.RequestOptionConnectionReuse)
	}

	input := ray.OutboundInput()
	output := ray.OutboundOutput()

	var requestFinish, responseFinish sync.Mutex
	requestFinish.Lock()
	responseFinish.Lock()

	session := encoding.NewClientSession(protocol.DefaultIDHash)

	go v.handleRequest(session, conn, request, payload, input, &requestFinish)
	go v.handleResponse(session, conn, request, rec.Destination(), output, &responseFinish)

	requestFinish.Lock()
	responseFinish.Lock()
	return
}
开发者ID:v2ray,项目名称:v2ray-core,代码行数:66,代码来源:outbound.go

示例11: Process

func (v *Handler) Process(ctx context.Context, outboundRay ray.OutboundRay) error {
	destination := proxy.DestinationFromContext(ctx)
	if v.destOverride != nil {
		server := v.destOverride.Server
		destination = net.Destination{
			Network: destination.Network,
			Address: server.Address.AsAddress(),
			Port:    net.Port(server.Port),
		}
	}
	log.Info("Freedom: Opening connection to ", destination)

	input := outboundRay.OutboundInput()
	output := outboundRay.OutboundOutput()

	var conn internet.Connection
	if v.domainStrategy == Config_USE_IP && destination.Address.Family().IsDomain() {
		destination = v.ResolveIP(destination)
	}

	dialer := proxy.DialerFromContext(ctx)
	err := retry.ExponentialBackoff(5, 100).On(func() error {
		rawConn, err := dialer.Dial(ctx, destination)
		if err != nil {
			return err
		}
		conn = rawConn
		return nil
	})
	if err != nil {
		log.Warning("Freedom: Failed to open connection to ", destination, ": ", err)
		return err
	}
	defer conn.Close()

	conn.SetReusable(false)

	requestDone := signal.ExecuteAsync(func() error {
		v2writer := buf.NewWriter(conn)
		if err := buf.PipeUntilEOF(input, v2writer); err != nil {
			return err
		}
		return nil
	})

	var reader io.Reader = conn

	timeout := v.timeout
	if destination.Network == net.Network_UDP {
		timeout = 16
	}
	if timeout > 0 {
		reader = net.NewTimeOutReader(timeout /* seconds */, conn)
	}

	responseDone := signal.ExecuteAsync(func() error {
		defer output.Close()

		v2reader := buf.NewReader(reader)
		if err := buf.PipeUntilEOF(v2reader, output); err != nil {
			return err
		}
		return nil
	})

	if err := signal.ErrorOrFinish2(requestDone, responseDone); err != nil {
		log.Info("Freedom: Connection ending with ", err)
		input.CloseError()
		output.CloseError()
		return err
	}

	return nil
}
开发者ID:ylywyn,项目名称:v2ray-core,代码行数:74,代码来源:freedom.go

示例12: Process

// Dispatch implements OutboundHandler.Dispatch().
func (v *VMessOutboundHandler) Process(ctx context.Context, outboundRay ray.OutboundRay) error {
	var rec *protocol.ServerSpec
	var conn internet.Connection

	dialer := proxy.DialerFromContext(ctx)
	err := retry.ExponentialBackoff(5, 100).On(func() error {
		rec = v.serverPicker.PickServer()
		rawConn, err := dialer.Dial(ctx, rec.Destination())
		if err != nil {
			return err
		}
		conn = rawConn

		return nil
	})
	if err != nil {
		log.Warning("VMess|Outbound: Failed to find an available destination:", err)
		return err
	}
	defer conn.Close()

	target := proxy.DestinationFromContext(ctx)
	log.Info("VMess|Outbound: Tunneling request to ", target, " via ", rec.Destination())

	command := protocol.RequestCommandTCP
	if target.Network == net.Network_UDP {
		command = protocol.RequestCommandUDP
	}
	request := &protocol.RequestHeader{
		Version: encoding.Version,
		User:    rec.PickUser(),
		Command: command,
		Address: target.Address,
		Port:    target.Port,
		Option:  protocol.RequestOptionChunkStream,
	}

	rawAccount, err := request.User.GetTypedAccount()
	if err != nil {
		log.Warning("VMess|Outbound: Failed to get user account: ", err)
		return err
	}
	account := rawAccount.(*vmess.InternalAccount)
	request.Security = account.Security

	conn.SetReusable(true)
	if conn.Reusable() { // Conn reuse may be disabled on transportation layer
		request.Option.Set(protocol.RequestOptionConnectionReuse)
	}

	input := outboundRay.OutboundInput()
	output := outboundRay.OutboundOutput()

	session := encoding.NewClientSession(protocol.DefaultIDHash)

	requestDone := signal.ExecuteAsync(func() error {
		writer := bufio.NewWriter(conn)
		session.EncodeRequestHeader(request, writer)

		bodyWriter := session.EncodeRequestBody(request, writer)
		firstPayload, err := input.ReadTimeout(time.Millisecond * 500)
		if err != nil && err != ray.ErrReadTimeout {
			return errors.Base(err).Message("VMess|Outbound: Failed to get first payload.")
		}
		if !firstPayload.IsEmpty() {
			if err := bodyWriter.Write(firstPayload); err != nil {
				return errors.Base(err).Message("VMess|Outbound: Failed to write first payload.")
			}
			firstPayload.Release()
		}

		writer.SetBuffered(false)

		if err := buf.PipeUntilEOF(input, bodyWriter); err != nil {
			return err
		}

		if request.Option.Has(protocol.RequestOptionChunkStream) {
			if err := bodyWriter.Write(buf.NewLocal(8)); err != nil {
				return err
			}
		}
		return nil
	})

	responseDone := signal.ExecuteAsync(func() error {
		defer output.Close()

		reader := bufio.NewReader(conn)
		header, err := session.DecodeResponseHeader(reader)
		if err != nil {
			return err
		}
		v.handleCommand(rec.Destination(), header.Command)

		conn.SetReusable(header.Option.Has(protocol.ResponseOptionConnectionReuse))

		reader.SetBuffered(false)
		bodyReader := session.DecodeResponseBody(request, reader)
//.........这里部分代码省略.........
开发者ID:ylywyn,项目名称:v2ray-core,代码行数:101,代码来源:outbound.go

示例13: Process

func (c *Client) Process(ctx context.Context, ray ray.OutboundRay) error {
	destination := proxy.DestinationFromContext(ctx)

	var server *protocol.ServerSpec
	var conn internet.Connection

	dialer := proxy.DialerFromContext(ctx)
	err := retry.ExponentialBackoff(5, 100).On(func() error {
		server = c.serverPicker.PickServer()
		dest := server.Destination()
		rawConn, err := dialer.Dial(ctx, dest)
		if err != nil {
			return err
		}
		conn = rawConn

		return nil
	})

	if err != nil {
		log.Warning("Socks|Client: Failed to find an available destination.")
		return err
	}

	defer conn.Close()
	conn.SetReusable(false)

	request := &protocol.RequestHeader{
		Version: socks5Version,
		Command: protocol.RequestCommandTCP,
		Address: destination.Address,
		Port:    destination.Port,
	}
	if destination.Network == net.Network_UDP {
		request.Command = protocol.RequestCommandUDP
	}

	user := server.PickUser()
	if user != nil {
		request.User = user
	}

	udpRequest, err := ClientHandshake(request, conn, conn)
	if err != nil {
		log.Warning("Socks|Client: Failed to establish connection to server: ", err)
		return err
	}

	var requestFunc func() error
	var responseFunc func() error
	if request.Command == protocol.RequestCommandTCP {
		requestFunc = func() error {
			return buf.PipeUntilEOF(ray.OutboundInput(), buf.NewWriter(conn))
		}
		responseFunc = func() error {
			defer ray.OutboundOutput().Close()
			return buf.PipeUntilEOF(buf.NewReader(conn), ray.OutboundOutput())
		}
	} else if request.Command == protocol.RequestCommandUDP {
		udpConn, err := dialer.Dial(ctx, udpRequest.Destination())
		if err != nil {
			log.Info("Socks|Client: Failed to create UDP connection: ", err)
			return err
		}
		defer udpConn.Close()
		requestFunc = func() error {
			return buf.PipeUntilEOF(ray.OutboundInput(), &UDPWriter{request: request, writer: udpConn})
		}
		responseFunc = func() error {
			defer ray.OutboundOutput().Close()
			reader := &UDPReader{reader: net.NewTimeOutReader(16, udpConn)}
			return buf.PipeUntilEOF(reader, ray.OutboundOutput())
		}
	}

	requestDone := signal.ExecuteAsync(requestFunc)
	responseDone := signal.ExecuteAsync(responseFunc)
	if err := signal.ErrorOrFinish2(requestDone, responseDone); err != nil {
		log.Info("Socks|Client: Connection ends with ", err)
		ray.OutboundInput().CloseError()
		ray.OutboundOutput().CloseError()
		return err
	}

	return nil
}
开发者ID:ylywyn,项目名称:v2ray-core,代码行数:86,代码来源:client.go


注:本文中的v2ray/com/core/transport/internet.Connection.Close方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。