当前位置: 首页>>代码示例>>Golang>>正文


Golang net.IPAddress函数代码示例

本文整理汇总了Golang中v2ray/com/core/common/net.IPAddress函数的典型用法代码示例。如果您正苦于以下问题:Golang IPAddress函数的具体用法?Golang IPAddress怎么用?Golang IPAddress使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了IPAddress函数的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。

示例1: TestSourceIPRule

func TestSourceIPRule(t *testing.T) {
	assert := assert.On(t)

	rule := ParseRule([]byte(`{
    "type": "field",
    "source": [
      "10.0.0.0/8",
      "192.0.0.0/24"
    ],
    "outboundTag": "direct"
  }`))
	assert.Pointer(rule).IsNotNil()
	cond, err := rule.BuildCondition()
	assert.Error(err).IsNil()
	assert.Bool(cond.Apply(&proxy.SessionInfo{
		Source: v2net.TCPDestination(v2net.DomainAddress("www.ooxx.com"), 80),
	})).IsFalse()
	assert.Bool(cond.Apply(&proxy.SessionInfo{
		Source: v2net.TCPDestination(v2net.IPAddress([]byte{10, 0, 0, 1}), 80),
	})).IsTrue()
	assert.Bool(cond.Apply(&proxy.SessionInfo{
		Source: v2net.TCPDestination(v2net.IPAddress([]byte{127, 0, 0, 1}), 80),
	})).IsFalse()
	assert.Bool(cond.Apply(&proxy.SessionInfo{
		Source: v2net.TCPDestination(v2net.IPAddress([]byte{192, 0, 0, 1}), 80),
	})).IsTrue()
}
开发者ID:v2ray,项目名称:v2ray-core,代码行数:27,代码来源:router_test.go

示例2: Destination

func (request *Socks5Request) Destination() v2net.Destination {
	switch request.AddrType {
	case AddrTypeIPv4:
		return v2net.TCPDestination(v2net.IPAddress(request.IPv4[:]), request.Port)
	case AddrTypeIPv6:
		return v2net.TCPDestination(v2net.IPAddress(request.IPv6[:]), request.Port)
	case AddrTypeDomain:
		return v2net.TCPDestination(v2net.ParseAddress(request.Domain), request.Port)
	default:
		panic("Unknown address type")
	}
}
开发者ID:v2ray,项目名称:v2ray-core,代码行数:12,代码来源:socks.go

示例3: ReadUDPRequest

func ReadUDPRequest(packet []byte) (*Socks5UDPRequest, error) {
	if len(packet) < 5 {
		return nil, errors.New("Socks|UDP: Insufficient length of packet.")
	}
	request := new(Socks5UDPRequest)

	// packet[0] and packet[1] are reserved
	request.Fragment = packet[2]

	addrType := packet[3]
	var dataBegin int

	switch addrType {
	case AddrTypeIPv4:
		if len(packet) < 10 {
			return nil, errors.New("Socks|UDP: Insufficient length of packet.")
		}
		ip := packet[4:8]
		request.Port = v2net.PortFromBytes(packet[8:10])
		request.Address = v2net.IPAddress(ip)
		dataBegin = 10
	case AddrTypeIPv6:
		if len(packet) < 22 {
			return nil, errors.New("Socks|UDP: Insufficient length of packet.")
		}
		ip := packet[4:20]
		request.Port = v2net.PortFromBytes(packet[20:22])
		request.Address = v2net.IPAddress(ip)
		dataBegin = 22
	case AddrTypeDomain:
		domainLength := int(packet[4])
		if len(packet) < 5+domainLength+2 {
			return nil, errors.New("Socks|UDP: Insufficient length of packet.")
		}
		domain := string(packet[5 : 5+domainLength])
		request.Port = v2net.PortFromBytes(packet[5+domainLength : 5+domainLength+2])
		request.Address = v2net.ParseAddress(domain)
		dataBegin = 5 + domainLength + 2
	default:
		return nil, errors.Format("Socks|UDP: Unknown address type %d", addrType)
	}

	if len(packet) > dataBegin {
		b := buf.NewSmall()
		b.Append(packet[dataBegin:])
		request.Data = b
	}

	return request, nil
}
开发者ID:v2ray,项目名称:v2ray-core,代码行数:50,代码来源:udp.go

示例4: ReadUDPRequest

func ReadUDPRequest(packet []byte) (*Socks5UDPRequest, error) {
	if len(packet) < 5 {
		return nil, transport.ErrCorruptedPacket
	}
	request := new(Socks5UDPRequest)

	// packet[0] and packet[1] are reserved
	request.Fragment = packet[2]

	addrType := packet[3]
	var dataBegin int

	switch addrType {
	case AddrTypeIPv4:
		if len(packet) < 10 {
			return nil, transport.ErrCorruptedPacket
		}
		ip := packet[4:8]
		request.Port = v2net.PortFromBytes(packet[8:10])
		request.Address = v2net.IPAddress(ip)
		dataBegin = 10
	case AddrTypeIPv6:
		if len(packet) < 22 {
			return nil, transport.ErrCorruptedPacket
		}
		ip := packet[4:20]
		request.Port = v2net.PortFromBytes(packet[20:22])
		request.Address = v2net.IPAddress(ip)
		dataBegin = 22
	case AddrTypeDomain:
		domainLength := int(packet[4])
		if len(packet) < 5+domainLength+2 {
			return nil, transport.ErrCorruptedPacket
		}
		domain := string(packet[5 : 5+domainLength])
		request.Port = v2net.PortFromBytes(packet[5+domainLength : 5+domainLength+2])
		request.Address = v2net.ParseAddress(domain)
		dataBegin = 5 + domainLength + 2
	default:
		log.Warning("Unknown address type ", addrType)
		return nil, ErrorUnknownAddressType
	}

	if len(packet) > dataBegin {
		request.Data = alloc.NewBuffer().Clear().Append(packet[dataBegin:])
	}

	return request, nil
}
开发者ID:DZLZHCODE,项目名称:v2ray-core,代码行数:49,代码来源:udp.go

示例5: DecodeUDPPacket

func DecodeUDPPacket(packet []byte) (*protocol.RequestHeader, []byte, error) {
	if len(packet) < 5 {
		return nil, nil, errors.New("Socks|UDP: Insufficient length of packet.")
	}
	request := &protocol.RequestHeader{
		Version: socks5Version,
		Command: protocol.RequestCommandUDP,
	}

	// packet[0] and packet[1] are reserved
	if packet[2] != 0 /* fragments */ {
		return nil, nil, errors.New("Socks|UDP: Fragmented payload.")
	}

	addrType := packet[3]
	var dataBegin int

	switch addrType {
	case addrTypeIPv4:
		if len(packet) < 10 {
			return nil, nil, errors.New("Socks|UDP: Insufficient length of packet.")
		}
		ip := packet[4:8]
		request.Port = v2net.PortFromBytes(packet[8:10])
		request.Address = v2net.IPAddress(ip)
		dataBegin = 10
	case addrTypeIPv6:
		if len(packet) < 22 {
			return nil, nil, errors.New("Socks|UDP: Insufficient length of packet.")
		}
		ip := packet[4:20]
		request.Port = v2net.PortFromBytes(packet[20:22])
		request.Address = v2net.IPAddress(ip)
		dataBegin = 22
	case addrTypeDomain:
		domainLength := int(packet[4])
		if len(packet) < 5+domainLength+2 {
			return nil, nil, errors.New("Socks|UDP: Insufficient length of packet.")
		}
		domain := string(packet[5 : 5+domainLength])
		request.Port = v2net.PortFromBytes(packet[5+domainLength : 5+domainLength+2])
		request.Address = v2net.ParseAddress(domain)
		dataBegin = 5 + domainLength + 2
	default:
		return nil, nil, errors.New("Socks|UDP: Unknown address type ", addrType)
	}

	return request, packet[dataBegin:], nil
}
开发者ID:ylywyn,项目名称:v2ray-core,代码行数:49,代码来源:protocol.go

示例6: TestIPv6AddressEquals

func TestIPv6AddressEquals(t *testing.T) {
	assert := assert.On(t)

	addr := v2net.IPAddress([]byte{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 1, 2, 3, 4, 5, 6})
	assert.Bool(addr.Equals(nil)).IsFalse()

	addr2 := v2net.IPAddress([]byte{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 1, 2, 3, 4, 5, 6})
	assert.Bool(addr.Equals(addr2)).IsTrue()

	addr3 := v2net.IPAddress([]byte{1, 2, 3, 4})
	assert.Bool(addr.Equals(addr3)).IsFalse()

	addr4 := v2net.IPAddress([]byte{1, 3, 3, 4, 5, 6, 7, 8, 9, 10, 1, 2, 3, 4, 5, 6})
	assert.Bool(addr.Equals(addr4)).IsFalse()
}
开发者ID:DZLZHCODE,项目名称:v2ray-core,代码行数:15,代码来源:address_test.go

示例7: ResolveIP

// Private: Visible for testing.
func (this *Router) ResolveIP(dest v2net.Destination) []v2net.Destination {
	ips := this.dnsServer.Get(dest.Address.Domain())
	if len(ips) == 0 {
		return nil
	}
	dests := make([]v2net.Destination, len(ips))
	for idx, ip := range ips {
		if dest.Network == v2net.Network_TCP {
			dests[idx] = v2net.TCPDestination(v2net.IPAddress(ip), dest.Port)
		} else {
			dests[idx] = v2net.UDPDestination(v2net.IPAddress(ip), dest.Port)
		}
	}
	return dests
}
开发者ID:xyz12810,项目名称:v2ray-core,代码行数:16,代码来源:router.go

示例8: TestUDPDestinationEquals

func TestUDPDestinationEquals(t *testing.T) {
	assert := assert.On(t)

	dest := v2net.UDPDestination(v2net.IPAddress([]byte{1, 2, 3, 4}), 80)
	assert.Bool(dest.Equals(nil)).IsFalse()

	dest2 := v2net.UDPDestination(v2net.IPAddress([]byte{1, 2, 3, 4}), 80)
	assert.Bool(dest.Equals(dest2)).IsTrue()

	dest3 := v2net.TCPDestination(v2net.IPAddress([]byte{1, 2, 3, 4}), 80)
	assert.Bool(dest.Equals(dest3)).IsFalse()

	dest4 := v2net.UDPDestination(v2net.DomainAddress("v2ray.com"), 80)
	assert.Bool(dest.Equals(dest4)).IsFalse()
}
开发者ID:DZLZHCODE,项目名称:v2ray-core,代码行数:15,代码来源:destination_test.go

示例9: TestIPv4AddressEquals

func TestIPv4AddressEquals(t *testing.T) {
	assert := assert.On(t)

	addr := v2net.IPAddress([]byte{1, 2, 3, 4})
	assert.Address(addr).NotEquals(nil)

	addr2 := v2net.IPAddress([]byte{1, 2, 3, 4})
	assert.Address(addr).Equals(addr2)

	addr3 := v2net.IPAddress([]byte{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 1, 2, 3, 4, 5, 6})
	assert.Address(addr).NotEquals(addr3)

	addr4 := v2net.IPAddress([]byte{1, 2, 3, 5})
	assert.Address(addr).NotEquals(addr4)
}
开发者ID:DZLZHCODE,项目名称:v2ray-core,代码行数:15,代码来源:address_test.go

示例10: TestDnsAdd

func TestDnsAdd(t *testing.T) {
	assert := assert.On(t)

	space := app.NewSpace()

	outboundHandlerManager := proxyman.NewDefaultOutboundHandlerManager()
	outboundHandlerManager.SetDefaultHandler(
		freedom.NewFreedomConnection(
			&freedom.Config{},
			space,
			&proxy.OutboundHandlerMeta{
				Address: v2net.AnyIP,
				StreamSettings: &internet.StreamSettings{
					Type: internet.StreamConnectionTypeRawTCP,
				},
			}))
	space.BindApp(proxyman.APP_ID_OUTBOUND_MANAGER, outboundHandlerManager)
	space.BindApp(dispatcher.APP_ID, dispatchers.NewDefaultDispatcher(space))

	domain := "local.v2ray.com"
	server := NewCacheServer(space, &Config{
		NameServers: []v2net.Destination{
			v2net.UDPDestination(v2net.IPAddress([]byte{8, 8, 8, 8}), v2net.Port(53)),
		},
	})
	space.BindApp(APP_ID, server)
	space.Initialize()

	ips := server.Get(domain)
	assert.Int(len(ips)).Equals(1)
	assert.IP(ips[0].To4()).Equals(net.IP([]byte{127, 0, 0, 1}))
}
开发者ID:DZLZHCODE,项目名称:v2ray-core,代码行数:32,代码来源:server_test.go

示例11: TestDomainRule

func TestDomainRule(t *testing.T) {
	assert := assert.On(t)

	rule := ParseRule([]byte(`{
    "type": "field",
    "domain": [
      "ooxx.com",
      "oxox.com",
      "regexp:\\.cn$"
    ],
    "network": "tcp",
    "outboundTag": "direct"
  }`))
	assert.Pointer(rule).IsNotNil()
	cond, err := rule.BuildCondition()
	assert.Error(err).IsNil()
	assert.Bool(cond.Apply(&proxy.SessionInfo{
		Destination: v2net.TCPDestination(v2net.ParseAddress("www.ooxx.com"), 80),
	})).IsTrue()
	assert.Bool(cond.Apply(&proxy.SessionInfo{
		Destination: v2net.TCPDestination(v2net.ParseAddress("www.aabb.com"), 80),
	})).IsFalse()
	assert.Bool(cond.Apply(&proxy.SessionInfo{
		Destination: v2net.TCPDestination(v2net.IPAddress([]byte{127, 0, 0, 1}), 80),
	})).IsFalse()
	assert.Bool(cond.Apply(&proxy.SessionInfo{
		Destination: v2net.TCPDestination(v2net.ParseAddress("www.12306.cn"), 80),
	})).IsTrue()
	assert.Bool(cond.Apply(&proxy.SessionInfo{
		Destination: v2net.TCPDestination(v2net.ParseAddress("www.acn.com"), 80),
	})).IsFalse()
}
开发者ID:v2ray,项目名称:v2ray-core,代码行数:32,代码来源:router_test.go

示例12: start

func (this *UDPHub) start() {
	this.cancel.WaitThread()
	defer this.cancel.FinishThread()

	oobBytes := make([]byte, 256)
	for this.Running() {
		buffer := this.pool.Allocate()
		nBytes, noob, _, addr, err := ReadUDPMsg(this.conn, buffer.Value, oobBytes)
		if err != nil {
			log.Info("UDP|Hub: Failed to read UDP msg: ", err)
			buffer.Release()
			continue
		}
		buffer.Slice(0, nBytes)

		session := new(proxy.SessionInfo)
		session.Source = v2net.UDPDestination(v2net.IPAddress(addr.IP), v2net.Port(addr.Port))
		if this.option.ReceiveOriginalDest && noob > 0 {
			session.Destination = RetrieveOriginalDest(oobBytes[:noob])
		}
		this.queue.Enqueue(UDPPayload{
			payload: buffer,
			session: session,
		})
	}
}
开发者ID:xyz12810,项目名称:v2ray-core,代码行数:26,代码来源:hub.go

示例13: handleSocks4

func (v *Server) handleSocks4(clientAddr v2net.Destination, reader *bufio.BufferedReader, writer *bufio.BufferedWriter, auth protocol.Socks4AuthenticationRequest) error {
	result := protocol.Socks4RequestGranted
	if auth.Command == protocol.CmdBind {
		result = protocol.Socks4RequestRejected
	}
	socks4Response := protocol.NewSocks4AuthenticationResponse(result, auth.Port, auth.IP[:])

	socks4Response.Write(writer)

	if result == protocol.Socks4RequestRejected {
		log.Warning("Socks: Unsupported socks 4 command ", auth.Command)
		log.Access(clientAddr, "", log.AccessRejected, ErrUnsupportedSocksCommand)
		return ErrUnsupportedSocksCommand
	}

	reader.SetCached(false)
	writer.SetCached(false)

	dest := v2net.TCPDestination(v2net.IPAddress(auth.IP[:]), auth.Port)
	session := &proxy.SessionInfo{
		Source:      clientAddr,
		Destination: dest,
		Inbound:     v.meta,
	}
	log.Access(clientAddr, dest, log.AccessAccepted, "")
	v.transport(reader, writer, session)
	return nil
}
开发者ID:v2ray,项目名称:v2ray-core,代码行数:28,代码来源:server.go

示例14: start

func (v *UDPHub) start() {
	v.cancel.WaitThread()
	defer v.cancel.FinishThread()

	oobBytes := make([]byte, 256)
	for v.Running() {
		buffer := buf.NewSmall()
		var noob int
		var addr *net.UDPAddr
		err := buffer.AppendSupplier(func(b []byte) (int, error) {
			n, nb, _, a, e := ReadUDPMsg(v.conn, b, oobBytes)
			noob = nb
			addr = a
			return n, e
		})

		if err != nil {
			log.Info("UDP|Hub: Failed to read UDP msg: ", err)
			buffer.Release()
			continue
		}

		session := new(proxy.SessionInfo)
		session.Source = v2net.UDPDestination(v2net.IPAddress(addr.IP), v2net.Port(addr.Port))
		if v.option.ReceiveOriginalDest && noob > 0 {
			session.Destination = RetrieveOriginalDest(oobBytes[:noob])
		}
		v.queue.Enqueue(UDPPayload{
			payload: buffer,
			session: session,
		})
	}
}
开发者ID:v2ray,项目名称:v2ray-core,代码行数:33,代码来源:hub.go

示例15: TestNetIPv4Address

func TestNetIPv4Address(t *testing.T) {
	assert := assert.On(t)

	ip := net.IPv4(1, 2, 3, 4)
	addr := v2net.IPAddress(ip)
	assert.Address(addr).IsIPv4()
	assert.Address(addr).EqualsString("1.2.3.4")
}
开发者ID:DZLZHCODE,项目名称:v2ray-core,代码行数:8,代码来源:address_test.go


注:本文中的v2ray/com/core/common/net.IPAddress函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。