本文整理汇总了Golang中rsc/io/tmp/slowgc/liblink.Prog.To方法的典型用法代码示例。如果您正苦于以下问题：Golang Prog.To方法的具体用法？Golang Prog.To怎么用？Golang Prog.To使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类rsc/io/tmp/slowgc/liblink.Prog的用法示例。
在下文中一共展示了Prog.To方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Golang代码示例。
示例1: progedit
func progedit(ctxt *liblink.Link, p *liblink.Prog) {
var literal string
var s *liblink.LSym
var q *liblink.Prog
// See obj6.c for discussion of TLS.
if canuselocaltls(ctxt) != 0 {
// Reduce TLS initial exec model to TLS local exec model.
// Sequences like
// MOVL TLS, BX
// ... off(BX)(TLS*1) ...
// become
// NOP
// ... off(TLS) ...
if p.As == AMOVL && p.From.Type_ == D_TLS && D_AX <= p.To.Type_ && p.To.Type_ <= D_DI {
p.As = ANOP
p.From.Type_ = D_NONE
p.To.Type_ = D_NONE
}
if p.From.Index == D_TLS && D_INDIR+D_AX <= p.From.Type_ && p.From.Type_ <= D_INDIR+D_DI {
p.From.Type_ = D_INDIR + D_TLS
p.From.Scale = 0
p.From.Index = D_NONE
}
if p.To.Index == D_TLS && D_INDIR+D_AX <= p.To.Type_ && p.To.Type_ <= D_INDIR+D_DI {
p.To.Type_ = D_INDIR + D_TLS
p.To.Scale = 0
p.To.Index = D_NONE
}
} else {
// As a courtesy to the C compilers, rewrite TLS local exec load as TLS initial exec load.
// The instruction
// MOVL off(TLS), BX
// becomes the sequence
// MOVL TLS, BX
// MOVL off(BX)(TLS*1), BX
// This allows the C compilers to emit references to m and g using the direct off(TLS) form.
if p.As == AMOVL && p.From.Type_ == D_INDIR+D_TLS && D_AX <= p.To.Type_ && p.To.Type_ <= D_DI {
q = liblink.Appendp(ctxt, p)
q.As = p.As
q.From = p.From
q.From.Type_ = D_INDIR + p.To.Type_
q.From.Index = D_TLS
q.From.Scale = 2 // TODO: use 1
q.To = p.To
p.From.Type_ = D_TLS
p.From.Index = D_NONE
p.From.Offset = 0
}
}
// TODO: Remove.
if ctxt.Headtype == liblink.Hplan9 {
if p.From.Scale == 1 && p.From.Index == D_TLS {
p.From.Scale = 2
}
if p.To.Scale == 1 && p.To.Index == D_TLS {
p.To.Scale = 2
}
}
// Rewrite CALL/JMP/RET to symbol as D_BRANCH.
switch p.As {
case ACALL,
AJMP,
ARET:
if (p.To.Type_ == D_EXTERN || p.To.Type_ == D_STATIC) && p.To.Sym != nil {
p.To.Type_ = D_BRANCH
}
break
}
// Rewrite float constants to values stored in memory.
switch p.As {
// Convert AMOVSS $(0), Xx to AXORPS Xx, Xx
case AMOVSS:
if p.From.Type_ == D_FCONST {
if p.From.U.Dval == 0 {
if p.To.Type_ >= D_X0 {
if p.To.Type_ <= D_X7 {
p.As = AXORPS
p.From.Type_ = p.To.Type_
p.From.Index = p.To.Index
break
}
}
}
}
fallthrough
//.........这里部分代码省略.........
示例2: progedit
func progedit(ctxt *liblink.Link, p *liblink.Prog) {
var literal string
var s *liblink.LSym
var q *liblink.Prog
// Thread-local storage references use the TLS pseudo-register.
// As a register, TLS refers to the thread-local storage base, and it
// can only be loaded into another register:
//
// MOVQ TLS, AX
//
// An offset from the thread-local storage base is written off(reg)(TLS*1).
// Semantically it is off(reg), but the (TLS*1) annotation marks this as
// indexing from the loaded TLS base. This emits a relocation so that
// if the linker needs to adjust the offset, it can. For example:
//
// MOVQ TLS, AX
// MOVQ 8(AX)(TLS*1), CX // load m into CX
//
// On systems that support direct access to the TLS memory, this
// pair of instructions can be reduced to a direct TLS memory reference:
//
// MOVQ 8(TLS), CX // load m into CX
//
// The 2-instruction and 1-instruction forms correspond roughly to
// ELF TLS initial exec mode and ELF TLS local exec mode, respectively.
//
// We applies this rewrite on systems that support the 1-instruction form.
// The decision is made using only the operating system (and probably
// the -shared flag, eventually), not the link mode. If some link modes
// on a particular operating system require the 2-instruction form,
// then all builds for that operating system will use the 2-instruction
// form, so that the link mode decision can be delayed to link time.
//
// In this way, all supported systems use identical instructions to
// access TLS, and they are rewritten appropriately first here in
// liblink and then finally using relocations in the linker.
if canuselocaltls(ctxt) != 0 {
// Reduce TLS initial exec model to TLS local exec model.
// Sequences like
// MOVQ TLS, BX
// ... off(BX)(TLS*1) ...
// become
// NOP
// ... off(TLS) ...
//
// TODO(rsc): Remove the Hsolaris special case. It exists only to
// guarantee we are producing byte-identical binaries as before this code.
// But it should be unnecessary.
if (p.As == AMOVQ || p.As == AMOVL) && p.From.Type_ == D_TLS && D_AX <= p.To.Type_ && p.To.Type_ <= D_R15 && ctxt.Headtype != liblink.Hsolaris {
nopout(p)
}
if p.From.Index == D_TLS && D_INDIR+D_AX <= p.From.Type_ && p.From.Type_ <= D_INDIR+D_R15 {
p.From.Type_ = D_INDIR + D_TLS
p.From.Scale = 0
p.From.Index = D_NONE
}
if p.To.Index == D_TLS && D_INDIR+D_AX <= p.To.Type_ && p.To.Type_ <= D_INDIR+D_R15 {
p.To.Type_ = D_INDIR + D_TLS
p.To.Scale = 0
p.To.Index = D_NONE
}
} else {
// As a courtesy to the C compilers, rewrite TLS local exec load as TLS initial exec load.
// The instruction
// MOVQ off(TLS), BX
// becomes the sequence
// MOVQ TLS, BX
// MOVQ off(BX)(TLS*1), BX
// This allows the C compilers to emit references to m and g using the direct off(TLS) form.
if (p.As == AMOVQ || p.As == AMOVL) && p.From.Type_ == D_INDIR+D_TLS && D_AX <= p.To.Type_ && p.To.Type_ <= D_R15 {
q = liblink.Appendp(ctxt, p)
q.As = p.As
q.From = p.From
q.From.Type_ = D_INDIR + p.To.Type_
q.From.Index = D_TLS
q.From.Scale = 2 // TODO: use 1
q.To = p.To
p.From.Type_ = D_TLS
p.From.Index = D_NONE
p.From.Offset = 0
}
}
// TODO: Remove.
if ctxt.Headtype == liblink.Hwindows || ctxt.Headtype == liblink.Hplan9 {
if p.From.Scale == 1 && p.From.Index == D_TLS {
p.From.Scale = 2
}
if p.To.Scale == 1 && p.To.Index == D_TLS {
p.To.Scale = 2
}
}
//.........这里部分代码省略.........