Golang Client.Rcpt方法代码示例

func smtpSendMailPart2(c *smtp.Client, smtpHost string, a smtp.Auth, from string, to []string, msg []byte) (err error) {
	defer c.Close()
	if err = c.Hello("localhost"); err != nil {
		return err
	}
	if ok, _ := c.Extension("STARTTLS"); ok {
		config := &tls.Config{ServerName: smtpHost}
		if err = c.StartTLS(config); err != nil {
			return err
		}
	}
	if a != nil {
		if ok, _ := c.Extension("AUTH"); ok {
			if err = c.Auth(a); err != nil {
				return err
			}
		}
	}
	if err = c.Mail(from); err != nil {
		return err
	}
	for _, addr := range to {
		if err = c.Rcpt(addr); err != nil {
			return err
		}
	}
	w, err := c.Data()
	if err != nil {
		return err
	}
	_, err = w.Write(msg)
	if err != nil {
		return err
	}
	err = w.Close()
	if err != nil {
		return err
	}
	return c.Quit()
}

func (DefaultSender) Send(from, to, content string) error {
	var (
		err  error
		c    *smtp.Client
		auth smtp.Auth
	)
	log.Println("mail: sending mail to " + to)
	auth, err = DefaultSender{}.auth()
	if nil != err {
		return err
	}
	c, err = smtp.Dial(MAIL_HOST + ":" + MAIL_PORT)
	if nil != err {
		return err
	}
	defer c.Close()

	tlc := &tls.Config{
		InsecureSkipVerify: true,
		ServerName:         MAIL_HOST,
	}
	if err = c.StartTLS(tlc); err != nil {
		log.Println("tls error " + err.Error())
		return err
	}
	c.Auth(auth)
	c.Mail(from)
	c.Rcpt(to)

	// Send the email body.
	wc, err := c.Data()
	if err != nil {
		log.Fatal(err)
	}
	defer wc.Close()
	buf := bytes.NewBufferString(content)
	if _, err = buf.WriteTo(wc); err != nil {
		log.Fatal(err)
	}
	if err != nil {
		log.Println("email: failed to write " + err.Error())
		return err
	}
	return err
}

func send(c *smtp.Client, m *mail.Message) error {
	if err := c.Mail(config.Message_From); err != nil {
		return fmt.Errorf("while setting From `%s`: %s", config.Message_From, err)
	}

	if config.ScanMessage {
		for _, i := range []string{"To", "Cc", "Bcc"} {
			if 0 == len(m.Header[i]) {
				continue
			}

			if l, err := m.Header.AddressList(i); err != nil {
				fmt.Fprintf(os.Stderr, "ScanMessage: Could not parse recipients in %s `%s`; %s", i, l, err)
			} else {
				for _, v := range l {
					config.Message_To = append(config.Message_To, v.Address)
				}
			}
		}

		if 0 == len(config.Message_To) {
			fmt.Fprintln(os.Stderr, "ScanMessage: No recipients found in message-body")
		}
	}

	for _, to := range config.Message_To {
		if err := c.Rcpt(to); err != nil {
			return fmt.Errorf("while setting Recipient `%s`: %s", to, err)
		}
	}

	w, err := c.Data()
	if err != nil {
		return fmt.Errorf("while setting Data: %s", err)
	}

	var s = ""
	for k, h := range m.Header {
		for _, v := range h {
			s += k + ": " + v + "\r\n"
		}
	}

	b := bytes.Buffer{}
	b.ReadFrom(m.Body)

	if _, err := w.Write([]byte(s + "\r\n" + b.String())); err != nil {
		return fmt.Errorf("while sending message: %s", err)
	}

	if err = w.Close(); err != nil {
		return fmt.Errorf("while closing message: %s", err)
	}

	if err = c.Quit(); err != nil {
		return fmt.Errorf("while closing connection: %s", err)
	}

	return nil
}

// Attempt to send the specified message to the specified client.
func (h *Host) deliverToMailServer(c *smtp.Client, m *Message) error {
	r, err := h.storage.GetMessageBody(m)
	if err != nil {
		return err
	}
	defer r.Close()
	r, err = dkimSigned(m.From, r, h.config)
	if err != nil {
		return err
	}
	if err := c.Mail(m.From); err != nil {
		return err
	}
	for _, t := range m.To {
		if err := c.Rcpt(t); err != nil {
			return err
		}
	}
	w, err := c.Data()
	if err != nil {
		return err
	}
	defer w.Close()
	if _, err := io.Copy(w, r); err != nil {
		return err
	}
	return nil
}

func sendMail(c *conf.ConfigFile, e Envelope) error {
	var addr string
	var err error
	var conn *smtp.Client

	addr, _ = c.GetString("main", "smtp")

	conn, err = smtp.Dial(addr)
	if err != nil {
		return err
	}

	if err = conn.Mail(e.Sender); err != nil {
		return err
	}

	for _, addr := range e.Recipients {
		if err = conn.Rcpt(addr); err != nil {
			return err
		}
	}

	w, err := conn.Data()
	if err != nil {
		return err
	}

	io.Copy(w, serializeMail(e))
	conn.Quit()
	return nil
}

func addRcpt(c *smtp.Client, address []string) error {
	for _, addr := range address {
		if err := c.Rcpt(addr); err != nil {
			return err
		}
	}
	return nil
}

func SendEmail(address string, from string, toArray []string, subject string, message []byte) (string, *gkerr.GkErrDef) {

	var err error
	var conn *smtp.Client
	var dataWriter io.WriteCloser
	var gkErr *gkerr.GkErrDef
	var sendId string

	conn, err = smtp.Dial(address)
	if err != nil {
		gkErr = gkerr.GenGkErr("smtp.Dial", err, ERROR_ID_SMTP_DIAL)
		return "", gkErr
	}

	conn.Mail(from)
	for _, adr := range toArray {
		conn.Rcpt(adr)
	}

	dataWriter, err = conn.Data()
	if err != nil {
		gkErr = gkerr.GenGkErr("conn.Data", err, ERROR_ID_SMTP_DATA)
		return "", gkErr
	}

	defer dataWriter.Close()

	buf := bytes.NewBufferString("From: " + from + "\nTo: " + toArray[0] + "\nSubject: " + subject + "\n")
	_, err = buf.WriteTo(dataWriter)
	if err != nil {
		gkErr = gkerr.GenGkErr("buf.WriteTo", err, ERROR_ID_SMTP_WRITE)
		return "", gkErr
	}

	buf = bytes.NewBufferString(string(message))
	_, err = buf.WriteTo(dataWriter)
	if err != nil {
		gkErr = gkerr.GenGkErr("buf.WriteTo", err, ERROR_ID_SMTP_WRITE)
		return "", gkErr
	}

	err = conn.Quit()
	if err != nil {
		localError := fmt.Sprintf("%v", err)
		if strings.Index(localError, "Ok") != -1 &&
			strings.Index(localError, "queued as") != -1 {
			sendId = localError
		} else {
			gkErr = gkerr.GenGkErr("conn.Quit", err, ERROR_ID_SMTP_QUIT)
			//gklog.LogTrace(fmt.Sprintf("smtp quit %T [%v] %v",err, err, gkErr))
			return "", gkErr
		}
	}

	return sendId, nil
}

// rcpt parses the specified list of RFC 5322 addresses
// and calls smtp.Client.Rcpt() with each one.
func rcpt(c *smtp.Client, addresses []string) error {
	for _, rcptAddr := range addresses {
		parsedAddr, err := parseAddress(rcptAddr)
		if err != nil {
			return err
		}

		if err = c.Rcpt(parsedAddr); err != nil {
			return err
		}
	}

	return nil
}

func SendMail(to []string, subject, body string) (err error) {
	if addr == "" {
		// skip if not configured
		return nil
	}
	// create client
	var conn net.Conn
	var client *smtp.Client
	if conn, err = net.Dial("tcp", addr+":25"); err != nil {
		return logError(err, to, subject, body)
	}
	if client, err = smtp.NewClient(conn, ""); err != nil {
		return logError(err, to, subject, body)
	}
	defer client.Quit()
	msg := fmt.Sprintf("From: %s\n", from)
	if err = client.Mail(from); err != nil {
		return logError(err, to, subject, body)
	}
	for _, addr := range to {
		msg += fmt.Sprintf("To: %s\n", addr)
		if err = client.Rcpt(addr); err != nil {
			return logError(err, to, subject, body)
		}
	}
	for _, addr := range cc {
		msg += fmt.Sprintf("Cc: %s\n", addr)
		if err = client.Rcpt(addr); err != nil {
			return logError(err, to, subject, body)
		}
	}
	msg += fmt.Sprintf("Date: %s\n", time.Now().String())
	msg += fmt.Sprintf("Subject: %s\n\n", subject)
	msg += body

	w, err := client.Data()
	if err != nil {
		return logError(err, to, subject, body)
	}

	fmt.Fprintf(w, msg)
	w.Close()
	log.Printf("[SMTP] SENT: %v '%s'", to, subject)
	return nil
}

//.........这里部分代码省略.........
	}
	stdin, err := cmd.StdinPipe()
	if err != nil {
		return err
	}
	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}

	err = cmd.Start()
	if err != nil {
		return err
	}

	stdin.Write(emailBytes)
	stdin.Close()

	signedData, err := ioutil.ReadAll(stdout)
	if err != nil {
		return err
	}
	err = cmd.Wait()
	if err != nil {
		return err
	}

	var signedEmail bytes.Buffer
	headerToBytes(&signedEmail, e.msgHeaders())
	signedEmail.Write(signedData)
	raw := signedEmail.Bytes()

	// Manually send email using net/smtp

	var c *smtp.Client
	if port == 465 {
		// TLS config
		tlsconfig := &tls.Config{
			InsecureSkipVerify: true,
			ServerName:         hostname,
		}

		// Here is the key, you need to call tls.Dial instead of smtp.Dial
		// for smtp servers running on 465 that require an ssl connection
		// from the very beginning (no starttls)
		conn, err := tls.Dial("tcp", addr, tlsconfig)
		if err != nil {
			return err
		}

		c, err = smtp.NewClient(conn, hostname)
		if err != nil {
			return err
		}
	} else {
		c, err = smtp.Dial(addr)
		if err != nil {
			return err
		}
	}

	defer c.Close()
	if err = c.Hello(heloHostname); err != nil {
		return err
	}
	if ok, _ := c.Extension("STARTTLS"); ok {
		config := &tls.Config{ServerName: hostname}
		if err = c.StartTLS(config); err != nil {
			return err
		}
	}
	if a != nil {
		if ok, _ := c.Extension("AUTH"); ok {
			if err = c.Auth(a); err != nil {
				return err
			}
		}
	}
	if err = c.Mail(from.Address); err != nil {
		return err
	}
	for _, addr := range to {
		if err = c.Rcpt(addr); err != nil {
			return err
		}
	}
	w, err := c.Data()
	if err != nil {
		return err
	}
	_, err = w.Write(raw)
	if err != nil {
		return err
	}
	err = w.Close()
	if err != nil {
		return err
	}
	return c.Quit()
}

// send does the low level sending of the email
func send(host string, port string, from string, to []string, msg string, auth smtp.Auth, encryption encryption, config *tls.Config, connectTimeout int) error {
	var smtpConnectChannel chan smtpConnectErrorChannel
	var c *smtp.Client = nil
	var err error

	// set the timeout value
	timeout := time.Duration(connectTimeout) * time.Second

	// if there is a timeout, setup the channel and do the connect under a goroutine
	if timeout != 0 {
		smtpConnectChannel = make(chan smtpConnectErrorChannel, 2)
		go func() {
			c, err = smtpConnect(host, port, from, to, msg, auth, encryption, config)
			// send the result
			smtpConnectChannel <- smtpConnectErrorChannel{
				client: c,
				err:    err,
			}
		}()
	}

	if timeout == 0 {
		// no timeout, just fire the connect
		c, err = smtpConnect(host, port, from, to, msg, auth, encryption, config)
	} else {
		// get the connect result or timeout result, which ever happens first
		select {
		case result := <-smtpConnectChannel:
			c = result.client
			err = result.err
		case <-time.After(timeout):
			return errors.New("Mail Error: SMTP Connection timed out")
		}
	}

	// check for connect error
	if err != nil {
		return err
	}

	defer c.Close()

	// Set the sender
	if err := c.Mail(from); err != nil {
		return err
	}

	// Set the recipients
	for _, address := range to {
		if err := c.Rcpt(address); err != nil {
			return err
		}
	}

	// Send the data command
	w, err := c.Data()
	if err != nil {
		return err
	}

	// write the message
	_, err = fmt.Fprint(w, msg)
	if err != nil {
		return err
	}

	err = w.Close()
	if err != nil {
		return err
	}

	return c.Quit()
}

func (mailer *RecMailer) processOneRecord(id string, email string, w io.Writer, smtpClient *smtp.Client, httpClient *http.Client) int {
	var (
		recResponse RecResponse
	)

	fullUrl := fmt.Sprintf(mailer.Config.RecUrl, id)
	resp, err := httpClient.Get(fullUrl)

	if err != nil {
		fmt.Fprintf(w, "Unable to get URL %s\n", fullUrl)
		fmt.Println(err)
		resp.Body.Close()
		return 1
	}

	readBytes, err := ioutil.ReadAll(resp.Body)
	resp.Body.Close()
	if err != nil {
		fmt.Fprintf(w, "Unable to read from URL %s\n", fullUrl)
		return 1
	}

	err = json.Unmarshal(readBytes, &recResponse)
	if err != nil {
		fmt.Fprintf(w, "Unable to parse JSON http resp for user %s\n", id)
		fmt.Println(err)
		return 1
	}

	if len(recResponse.Suggestions) == 0 {
		fmt.Fprintf(w, "No recommendations for user %s\n", id)
		return 1
	}

	// If there's no thumbnail, use a blank gif
	for recIndex := 0; recIndex < len(recResponse.Suggestions); recIndex++ {
		if len(recResponse.Suggestions[recIndex].Thumbnail.Url) == 0 {
			recResponse.Suggestions[recIndex].Thumbnail.Url = "http://graphics8.nytimes.com/images/misc/spacer.gif"
		}
	}

	//emails := make([]string, 1)
	//emails[0] = email

	localTime := time.Now()
	dateStr := localTime.Format(time.RFC1123Z)
	edata := new(EmailData)
	edata.FromAddress = mailer.Config.EnvelopeFrom
	edata.ToAddress = email
	edata.Subject = "Recommendations for you"
	edata.RecResponse = recResponse
	edata.Date = dateStr
	edata.HumanDate = fmt.Sprintf("%s %d, %d", localTime.Month(),
		localTime.Day(), localTime.Year())

	buff := new(bytes.Buffer)
	mailer.Template.Execute(buff, edata)

	//err = smtp.SendMail(mailer.Config.SmtpServer, nil, mailer.Config.SmtpFrom, emails, buff.Bytes())

	errReset := smtpClient.Reset()
	if errReset != nil {
		fmt.Printf("There was an error sending for user %s\n", id)
		fmt.Println(errReset)
		return 1
	}
	errMail := smtpClient.Mail(mailer.Config.SmtpFrom)
	if errMail != nil {
		fmt.Printf("There was an error sending for user %s\n", id)
		fmt.Println(errMail)
		return 1
	}
	errRcpt := smtpClient.Rcpt(email)
	if errRcpt != nil {
		fmt.Printf("There was an error sending for user %s\n", id)
		fmt.Println(errRcpt)
		return 1
	}
	smtpWriter, errData := smtpClient.Data()
	if errData != nil {
		fmt.Printf("There was an error sending for user %s\n", id)
		fmt.Println(errData)
		return 1
	}
	smtpWriter.Write(buff.Bytes())
	smtpWriter.Close()

	/*
	   if err != nil {
	       fmt.Printf("There was an error sending for user %s\n", id)
	       fmt.Println(err)
	       return 1
	   }
	*/

	fmt.Fprintf(w, "Success for %s, %s\n", id, email)
	return 0
}

/* Connects an SMTP server (usually localhost:25 in prod) and uses that to
   send an email with the body encoded in base64. */
func (self SmtpMailer) SendMail(recipients []string, subject, body string) error {
	// 'recipients' is expected a comma-separated list of emails in either of
	// these formats:
	// - [email protected]
	// - Bob Smith <[email protected]>
	var c *smtp.Client
	var err error
	if self.UseSSL {
		tlsCon, err := tls.Dial("tcp", fmt.Sprintf("%v:%v", self.Server, self.Port), &tls.Config{})
		if err != nil {
			return err
		}
		c, err = smtp.NewClient(tlsCon, self.Server)
	} else {
		c, err = smtp.Dial(fmt.Sprintf("%v:%v", self.Server, self.Port))
	}

	if err != nil {
		return err
	}

	if self.Username != "" {
		err = c.Auth(smtp.PlainAuth("", self.Username, self.Password, self.Server))
		if err != nil {
			return err
		}
	}

	// Set the sender
	from := mail.Address{"Evergreen Alerts", self.From}
	err = c.Mail(self.From)
	if err != nil {
		evergreen.Logger.Errorf(slogger.ERROR, "Error establishing mail sender (%v): %v", self.From, err)
		return err
	}

	// Set the recipient
	for _, recipient := range recipients {
		err = c.Rcpt(recipient)
		if err != nil {
			evergreen.Logger.Errorf(slogger.ERROR, "Error establishing mail recipient (%v): %v", recipient, err)
			return err
		}
	}

	// Send the email body.
	wc, err := c.Data()
	if err != nil {
		return err
	}
	defer wc.Close()

	// set header information
	header := make(map[string]string)
	header["From"] = from.String()
	header["To"] = strings.Join(recipients, ", ")
	header["Subject"] = encodeRFC2047(subject)
	header["MIME-Version"] = "1.0"
	header["Content-Type"] = "text/html; charset=\"utf-8\""
	header["Content-Transfer-Encoding"] = "base64"

	message := ""
	for k, v := range header {
		message += fmt.Sprintf("%s: %s\r\n", k, v)
	}

	message += "\r\n" + base64.StdEncoding.EncodeToString([]byte(body))

	// write the body
	buf := bytes.NewBufferString(message)
	if _, err = buf.WriteTo(wc); err != nil {
		return err
	}
	return nil
}

//.........这里部分代码省略.........
	from := mail.Address{
		Name:    "",
		Address: viper.GetString("smtp_from"),
	}
	to := mail.Address{
		Name:    "",
		Address: toUser,
	}

	// Setup headers
	headers := make(map[string]string)
	headers["From"] = viper.GetString("smtp_from")
	headers["To"] = to.String()
	headers["Subject"] = subject

	// Setup message
	message := ""
	for k, v := range headers {
		message += fmt.Sprintf("%s: %s\r\n", k, v)
	}
	message += "\r\n" + b.String()

	// Connect to the SMTP Server
	servername := fmt.Sprintf("%s:%s", viper.GetString("smtp_host"), viper.GetString("smtp_port"))

	// TLS config
	tlsconfig := &tls.Config{
		InsecureSkipVerify: true,
		ServerName:         viper.GetString("smtp_host"),
	}

	var c *smtp.Client
	if viper.GetBool("smtp_tls") {

		// Here is the key, you need to call tls.Dial instead of smtp.Dial
		// for smtp servers running on 465 that require an ssl connection
		// from the very beginning (no starttls)

		conn, errc := tls.Dial("tcp", servername, tlsconfig)
		if errc != nil {
			log.Errorf("Error with c.Dial:%s", errc.Error())
			return err
		}

		c, err = smtp.NewClient(conn, viper.GetString("smtp_host"))
		if err != nil {
			log.Errorf("Error with c.NewClient:%s", err.Error())
			return err
		}
	} else {
		c, err = smtp.Dial(servername)
		if err != nil {
			log.Errorf("Error while smtp.Dial:%s", err)
		}
		defer c.Close()
	}

	// Auth
	if viper.GetString("smtp_user") != "" && viper.GetString("smtp_password") != "" {
		auth := smtp.PlainAuth("", viper.GetString("smtp_user"), viper.GetString("smtp_password"), viper.GetString("smtp_host"))
		if err = c.Auth(auth); err != nil {
			log.Errorf("Error with c.Auth:%s", err.Error())
			return err
		}
	}

	// To && From
	if err = c.Mail(from.Address); err != nil {
		log.Errorf("Error with c.Mail:%s", err.Error())
		return err
	}

	if err = c.Rcpt(to.Address); err != nil {
		log.Errorf("Error with c.Rcpt:%s", err.Error())
		return err
	}

	// Data
	w, err := c.Data()
	if err != nil {
		log.Errorf("Error with c.Data:%s", err.Error())
		return err
	}

	_, err = w.Write([]byte(message))
	if err != nil {
		log.Errorf("Error with c.Write:%s", err.Error())
		return err
	}

	err = w.Close()
	if err != nil {
		log.Errorf("Error with c.Close:%s", err.Error())
		return err
	}

	c.Quit()

	return nil
}

// SendMailMessage handles outgoing message to SMTP server.
//
// - The connections to the service can be either plain (port 25)
//   or SSL/TLS (port 465)
//
// - If the server supports STARTTLS and the channel is not already
//   encrypted (via SSL), the application will use the "STLS" command
//   to initiate a channel encryption.
//
// - Connections can be tunneled through any SOCKS5 proxy (like Tor)
func SendMailMessage(host, proxy, fromAddr, toAddr string, body []byte) error {
	var (
		c0  net.Conn
		c1  *tls.Conn
		cli *smtp.Client
	)
	defer func() {
		if cli != nil {
			cli.Close()
		}
		if c1 != nil {
			c1.Close()
		}
		if c0 != nil {
			c0.Close()
		}
	}()

	uSrv, err := url.Parse(host)
	if err != nil {
		return err
	}
	if proxy == "" {
		c0, err = net.Dial("tcp", uSrv.Host)
	} else {
		host, port, err := SplitHost(uSrv.Host)
		if err != nil {
			return err
		}
		c0, err = Socks5Connect("tcp", host, port, proxy)
	}
	if err != nil {
		return err
	}
	if c0 == nil {
		return errors.New("Can't estabish connection to " + uSrv.Host)
	}

	sslConfig := &tls.Config{InsecureSkipVerify: true}
	if uSrv.Scheme == "smtps" {
		c1 = tls.Client(c0, sslConfig)
		if err = c1.Handshake(); err != nil {
			return err
		}
		cli, err = smtp.NewClient(c1, uSrv.Host)
	} else {
		cli, err = smtp.NewClient(c0, uSrv.Host)
		if err == nil {
			if ok, _ := cli.Extension("STLS"); ok {
				err = cli.StartTLS(sslConfig)
			}
		}
	}
	if err != nil {
		return err
	}
	pw, _ := uSrv.User.Password()
	auth := smtp.PlainAuth("", uSrv.User.Username(), pw, uSrv.Host)
	if err = cli.Auth(auth); err != nil {
		return err
	}
	if err = cli.Mail(fromAddr); err != nil {
		return err
	}
	if err = cli.Rcpt(toAddr); err != nil {
		return err
	}
	wrt, err := cli.Data()
	if err != nil {
		return err
	}
	wrt.Write(body)
	wrt.Close()
	if err = cli.Quit(); err != nil {
		return err
	}
	return nil
}