Golang net.ChooseBindAddress函数代码示例

func DefaultAndValidateRunOptions(options *options.ServerRunOptions) {
	genericvalidation.ValidateRunOptions(options)

	// If advertise-address is not specified, use bind-address. If bind-address
	// is not usable (unset, 0.0.0.0, or loopback), we will use the host's default
	// interface as valid public addr for master (see: util/net#ValidPublicAddrForMaster)
	if options.AdvertiseAddress == nil || options.AdvertiseAddress.IsUnspecified() {
		hostIP, err := utilnet.ChooseBindAddress(options.BindAddress)
		if err != nil {
			glog.Fatalf("Unable to find suitable network address.error='%v' . "+
				"Try to set the AdvertiseAddress directly or provide a valid BindAddress to fix this.", err)
		}
		options.AdvertiseAddress = hostIP
	}
	glog.Infof("Will report %v as public IP address.", options.AdvertiseAddress)

	// Set default value for ExternalHost if not specified.
	if len(options.ExternalHost) == 0 {
		// TODO: extend for other providers
		if options.CloudProvider == "gce" {
			cloud, err := cloudprovider.InitCloudProvider(options.CloudProvider, options.CloudConfigFile)
			if err != nil {
				glog.Fatalf("Cloud provider could not be initialized: %v", err)
			}
			instances, supported := cloud.Instances()
			if !supported {
				glog.Fatalf("GCE cloud provider has no instances.  this shouldn't happen. exiting.")
			}
			hostname, err := os.Hostname()
			if err != nil {
				glog.Fatalf("Failed to get hostname: %v", err)
			}
			nodeName, err := instances.CurrentNodeName(hostname)
			if err != nil {
				glog.Fatalf("Failed to get NodeName: %v", err)
			}
			addrs, err := instances.NodeAddresses(nodeName)
			if err != nil {
				glog.Warningf("Unable to obtain external host address from cloud provider: %v", err)
			} else {
				for _, addr := range addrs {
					if addr.Type == api.NodeExternalIP {
						options.ExternalHost = addr.Address
					}
				}
			}
		}
	}
}

func DefaultAndValidateRunOptions(options *ServerRunOptions) {
	ValidateRunOptions(options)
	// If advertise-address is not specified, use bind-address. If bind-address
	// is not usable (unset, 0.0.0.0, or loopback), we will use the host's default
	// interface as valid public addr for master (see: util/net#ValidPublicAddrForMaster)
	if options.AdvertiseAddress == nil || options.AdvertiseAddress.IsUnspecified() {
		hostIP, err := utilnet.ChooseBindAddress(options.BindAddress)
		if err != nil {
			glog.Fatalf("Unable to find suitable network address.error='%v' . "+
				"Try to set the AdvertiseAddress directly or provide a valid BindAddress to fix this.", err)
		}
		options.AdvertiseAddress = hostIP
	}
	glog.Infof("Will report %v as public IP address.", options.AdvertiseAddress)
}

// Run runs the specified APIServer.  This should never exit.
func Run(s *options.APIServer) error {
	verifyClusterIPFlags(s)

	// If advertise-address is not specified, use bind-address. If bind-address
	// is not usable (unset, 0.0.0.0, or loopback), we will use the host's default
	// interface as valid public addr for master (see: util/net#ValidPublicAddrForMaster)
	if s.AdvertiseAddress == nil || s.AdvertiseAddress.IsUnspecified() {
		hostIP, err := utilnet.ChooseBindAddress(s.BindAddress)
		if err != nil {
			glog.Fatalf("Unable to find suitable network address.error='%v' . "+
				"Try to set the AdvertiseAddress directly or provide a valid BindAddress to fix this.", err)
		}
		s.AdvertiseAddress = hostIP
	}
	glog.Infof("Will report %v as public IP address.", s.AdvertiseAddress)

	if len(s.EtcdServerList) == 0 {
		glog.Fatalf("--etcd-servers must be specified")
	}

	if s.KubernetesServiceNodePort > 0 && !s.ServiceNodePortRange.Contains(s.KubernetesServiceNodePort) {
		glog.Fatalf("Kubernetes service port range %v doesn't contain %v", s.ServiceNodePortRange, (s.KubernetesServiceNodePort))
	}

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	cloud, err := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
	if err != nil {
		glog.Fatalf("Cloud provider could not be initialized: %v", err)
	}

	// Setup tunneler if needed
	var tunneler master.Tunneler
	var proxyDialerFn apiserver.ProxyDialerFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSH master.InstallSSHKey
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSH = instances.AddSSHKeyToAllInstances
			}
		}

		// Set up the tunneler
		tunneler = master.NewSSHTunneler(s.SSHUser, s.SSHKeyfile, installSSH)

		// Use the tunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = tunneler.Dial
		// Use the tunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = tunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	kubeletClient, err := kubeletclient.NewStaticKubeletClient(&s.KubeletConfig)
	if err != nil {
		glog.Fatalf("Failure to start kubelet client: %v", err)
	}

	apiGroupVersionOverrides, err := parseRuntimeConfig(s)
	if err != nil {
		glog.Fatalf("error in parsing runtime-config: %s", err)
	}

	clientConfig := &client.Config{
		Host: net.JoinHostPort(s.InsecureBindAddress.String(), strconv.Itoa(s.InsecurePort)),
	}
	if len(s.DeprecatedStorageVersion) != 0 {
		gv, err := unversioned.ParseGroupVersion(s.DeprecatedStorageVersion)
		if err != nil {
			glog.Fatalf("error in parsing group version: %s", err)
		}
		clientConfig.GroupVersion = &gv
	}

	client, err := client.New(clientConfig)
	if err != nil {
		glog.Fatalf("Invalid server address: %v", err)
	}

	legacyV1Group, err := registered.Group(api.GroupName)
	if err != nil {
		return err
	}

	storageDestinations := genericapiserver.NewStorageDestinations()

	storageVersions := generateStorageVersionMap(s.DeprecatedStorageVersion, s.StorageVersions)
	if _, found := storageVersions[legacyV1Group.GroupVersion.Group]; !found {
//.........这里部分代码省略.........

func startComponents(firstManifestURL, secondManifestURL string) (string, string) {
	// Setup
	handler := delegateHandler{}
	apiServer := httptest.NewServer(&handler)

	cfg := etcd.Config{
		Endpoints: []string{"http://127.0.0.1:4001"},
	}
	etcdClient, err := etcd.New(cfg)
	if err != nil {
		glog.Fatalf("Error creating etcd client: %v", err)
	}
	glog.Infof("Creating etcd client pointing to %v", cfg.Endpoints)

	keysAPI := etcd.NewKeysAPI(etcdClient)
	sleep := 4 * time.Second
	ok := false
	for i := 0; i < 3; i++ {
		keys, err := keysAPI.Get(context.TODO(), "/", nil)
		if err != nil {
			glog.Warningf("Unable to list root etcd keys: %v", err)
			if i < 2 {
				time.Sleep(sleep)
				sleep = sleep * sleep
			}
			continue
		}
		for _, node := range keys.Node.Nodes {
			if _, err := keysAPI.Delete(context.TODO(), node.Key, &etcd.DeleteOptions{Recursive: true}); err != nil {
				glog.Fatalf("Unable delete key: %v", err)
			}
		}
		ok = true
		break
	}
	if !ok {
		glog.Fatalf("Failed to connect to etcd")
	}

	cl := client.NewOrDie(&client.Config{Host: apiServer.URL, ContentConfig: client.ContentConfig{GroupVersion: testapi.Default.GroupVersion()}})
	clientset := clientset.NewForConfigOrDie(&client.Config{Host: apiServer.URL, ContentConfig: client.ContentConfig{GroupVersion: testapi.Default.GroupVersion()}})

	// TODO: caesarxuchao: hacky way to specify version of Experimental client.
	// We will fix this by supporting multiple group versions in Config
	cl.ExtensionsClient = client.NewExtensionsOrDie(&client.Config{Host: apiServer.URL, ContentConfig: client.ContentConfig{GroupVersion: testapi.Extensions.GroupVersion()}})

	// Master
	host, port, err := net.SplitHostPort(strings.TrimLeft(apiServer.URL, "http://"))
	if err != nil {
		glog.Fatalf("Unable to parse URL '%v': %v", apiServer.URL, err)
	}
	portNumber, err := strconv.Atoi(port)
	if err != nil {
		glog.Fatalf("Nonnumeric port? %v", err)
	}

	publicAddress := net.ParseIP(host)
	if publicAddress == nil {
		glog.Fatalf("No public address for %s", host)
	}

	// The caller of master.New should guarantee pulicAddress is properly set
	hostIP, err := utilnet.ChooseBindAddress(publicAddress)
	if err != nil {
		glog.Fatalf("Unable to find suitable network address.error='%v' . "+
			"Fail to get a valid public address for master.", err)
	}

	masterConfig := framework.NewMasterConfig()
	masterConfig.EnableCoreControllers = true
	masterConfig.EnableProfiling = true
	masterConfig.ReadWritePort = portNumber
	masterConfig.PublicAddress = hostIP
	masterConfig.CacheTimeout = 2 * time.Second

	// Create a master and install handlers into mux.
	m := master.New(masterConfig)
	handler.delegate = m.Handler

	// Scheduler
	schedulerConfigFactory := factory.NewConfigFactory(cl, api.DefaultSchedulerName)
	schedulerConfig, err := schedulerConfigFactory.Create()
	if err != nil {
		glog.Fatalf("Couldn't create scheduler config: %v", err)
	}
	eventBroadcaster := record.NewBroadcaster()
	schedulerConfig.Recorder = eventBroadcaster.NewRecorder(api.EventSource{Component: api.DefaultSchedulerName})
	eventBroadcaster.StartLogging(glog.Infof)
	eventBroadcaster.StartRecordingToSink(cl.Events(""))
	scheduler.New(schedulerConfig).Run()

	// ensure the service endpoints are sync'd several times within the window that the integration tests wait
	go endpointcontroller.NewEndpointController(clientset, controller.NoResyncPeriodFunc).
		Run(3, util.NeverStop)

	// TODO: Write an integration test for the replication controllers watch.
	go replicationcontroller.NewReplicationManager(clientset, controller.NoResyncPeriodFunc, replicationcontroller.BurstReplicas).
		Run(3, util.NeverStop)

	nodeController := nodecontroller.NewNodeController(nil, clientset, 5*time.Minute, util.NewFakeRateLimiter(), util.NewFakeRateLimiter(),
//.........这里部分代码省略.........

// Run runs the specified APIServer.  This should never exit.
func Run(s *options.APIServer) error {
	verifyClusterIPFlags(s)

	// If advertise-address is not specified, use bind-address. If bind-address
	// is not usable (unset, 0.0.0.0, or loopback), we will use the host's default
	// interface as valid public addr for master (see: util/net#ValidPublicAddrForMaster)
	if s.AdvertiseAddress == nil || s.AdvertiseAddress.IsUnspecified() {
		hostIP, err := utilnet.ChooseBindAddress(s.BindAddress)
		if err != nil {
			glog.Fatalf("Unable to find suitable network address.error='%v' . "+
				"Try to set the AdvertiseAddress directly or provide a valid BindAddress to fix this.", err)
		}
		s.AdvertiseAddress = hostIP
	}
	glog.Infof("Will report %v as public IP address.", s.AdvertiseAddress)

	if len(s.EtcdConfig.ServerList) == 0 {
		glog.Fatalf("--etcd-servers must be specified")
	}

	if s.KubernetesServiceNodePort > 0 && !s.ServiceNodePortRange.Contains(s.KubernetesServiceNodePort) {
		glog.Fatalf("Kubernetes service port range %v doesn't contain %v", s.ServiceNodePortRange, (s.KubernetesServiceNodePort))
	}

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	cloud, err := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
	if err != nil {
		glog.Fatalf("Cloud provider could not be initialized: %v", err)
	}

	// Setup tunneler if needed
	var tunneler master.Tunneler
	var proxyDialerFn apiserver.ProxyDialerFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSH master.InstallSSHKey
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSH = instances.AddSSHKeyToAllInstances
			}
		}
		if s.KubeletConfig.Port == 0 {
			glog.Fatalf("Must enable kubelet port if proxy ssh-tunneling is specified.")
		}
		// Set up the tunneler
		// TODO(cjcullen): If we want this to handle per-kubelet ports or other
		// kubelet listen-addresses, we need to plumb through options.
		healthCheckPath := &url.URL{
			Scheme: "https",
			Host:   net.JoinHostPort("127.0.0.1", strconv.FormatUint(uint64(s.KubeletConfig.Port), 10)),
			Path:   "healthz",
		}
		tunneler = master.NewSSHTunneler(s.SSHUser, s.SSHKeyfile, healthCheckPath, installSSH)

		// Use the tunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = tunneler.Dial
		// Use the tunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = tunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	kubeletClient, err := kubeletclient.NewStaticKubeletClient(&s.KubeletConfig)
	if err != nil {
		glog.Fatalf("Failure to start kubelet client: %v", err)
	}

	apiResourceConfigSource, err := parseRuntimeConfig(s)
	if err != nil {
		glog.Fatalf("error in parsing runtime-config: %s", err)
	}

	clientConfig := &restclient.Config{
		Host: net.JoinHostPort(s.InsecureBindAddress.String(), strconv.Itoa(s.InsecurePort)),
		// Increase QPS limits. The client is currently passed to all admission plugins,
		// and those can be throttled in case of higher load on apiserver - see #22340 and #22422
		// for more details. Once #22422 is fixed, we may want to remove it.
		QPS:   50,
		Burst: 100,
	}
	if len(s.DeprecatedStorageVersion) != 0 {
		gv, err := unversioned.ParseGroupVersion(s.DeprecatedStorageVersion)
		if err != nil {
			glog.Fatalf("error in parsing group version: %s", err)
		}
		clientConfig.GroupVersion = &gv
	}

//.........这里部分代码省略.........

// Run runs the specified APIServer.  This should never exit.
func Run(s *options.APIServer) error {
	verifyClusterIPFlags(s)

	// If advertise-address is not specified, use bind-address. If bind-address
	// is not usable (unset, 0.0.0.0, or loopback), we will use the host's default
	// interface as valid public addr for master (see: util/net#ValidPublicAddrForMaster)
	if s.AdvertiseAddress == nil || s.AdvertiseAddress.IsUnspecified() {
		hostIP, err := utilnet.ChooseBindAddress(s.BindAddress)
		if err != nil {
			glog.Fatalf("Unable to find suitable network address.error='%v' . "+
				"Try to set the AdvertiseAddress directly or provide a valid BindAddress to fix this.", err)
		}
		s.AdvertiseAddress = hostIP
	}
	glog.Infof("Will report %v as public IP address.", s.AdvertiseAddress)

	if len(s.EtcdConfig.ServerList) == 0 {
		glog.Fatalf("--etcd-servers must be specified")
	}

	if s.KubernetesServiceNodePort > 0 && !s.ServiceNodePortRange.Contains(s.KubernetesServiceNodePort) {
		glog.Fatalf("Kubernetes service port range %v doesn't contain %v", s.ServiceNodePortRange, (s.KubernetesServiceNodePort))
	}

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	cloud, err := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
	if err != nil {
		glog.Fatalf("Cloud provider could not be initialized: %v", err)
	}

	var proxyDialerFn apiserver.ProxyDialerFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSH genericapiserver.InstallSSHKey
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSH = instances.AddSSHKeyToAllInstances
			}
		}
		if s.KubeletConfig.Port == 0 {
			glog.Fatalf("Must enable kubelet port if proxy ssh-tunneling is specified.")
		}
		// Set up the tunneler
		// TODO(cjcullen): If we want this to handle per-kubelet ports or other
		// kubelet listen-addresses, we need to plumb through options.
		healthCheckPath := &url.URL{
			Scheme: "https",
			Host:   net.JoinHostPort("127.0.0.1", strconv.FormatUint(uint64(s.KubeletConfig.Port), 10)),
			Path:   "healthz",
		}
		tunneler := genericapiserver.NewSSHTunneler(s.SSHUser, s.SSHKeyfile, healthCheckPath, installSSH)

		// Use the tunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = tunneler.Dial
		// Use the tunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = tunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	apiResourceConfigSource, err := parseRuntimeConfig(s)
	if err != nil {
		glog.Fatalf("error in parsing runtime-config: %s", err)
	}

	clientConfig := &restclient.Config{
		Host: net.JoinHostPort(s.InsecureBindAddress.String(), strconv.Itoa(s.InsecurePort)),
		// Increase QPS limits. The client is currently passed to all admission plugins,
		// and those can be throttled in case of higher load on apiserver - see #22340 and #22422
		// for more details. Once #22422 is fixed, we may want to remove it.
		QPS:   50,
		Burst: 100,
	}
	if len(s.DeprecatedStorageVersion) != 0 {
		gv, err := unversioned.ParseGroupVersion(s.DeprecatedStorageVersion)
		if err != nil {
			glog.Fatalf("error in parsing group version: %s", err)
		}
		clientConfig.GroupVersion = &gv
	}

	client, err := clientset.NewForConfig(clientConfig)
	if err != nil {
		glog.Errorf("Failed to create clientset: %v", err)
	}

	// TODO: register cluster federation resources here.

//.........这里部分代码省略.........

func (s *ServingOptions) DefaultExternalAddress() (net.IP, error) {
	return utilnet.ChooseBindAddress(s.BindAddress)
}