Golang master.NewSSHTunneler函数代码示例

// Run runs the specified APIServer.  This should never exit.
func (s *APIServer) Run(_ []string) error {
	s.verifyClusterIPFlags()

	// If advertise-address is not specified, use bind-address. If bind-address
	// is not usable (unset, 0.0.0.0, or loopback), setDefaults() in
	// pkg/master/master.go will do the right thing and use the host's default
	// interface.
	if s.AdvertiseAddress == nil || s.AdvertiseAddress.IsUnspecified() {
		s.AdvertiseAddress = s.BindAddress
	}

	if (s.EtcdConfigFile != "" && len(s.EtcdServerList) != 0) || (s.EtcdConfigFile == "" && len(s.EtcdServerList) == 0) {
		glog.Fatalf("Specify either --etcd-servers or --etcd-config")
	}

	if s.KubernetesServiceNodePort > 0 && !s.ServiceNodePortRange.Contains(s.KubernetesServiceNodePort) {
		glog.Fatalf("Kubernetes service port range %v doesn't contain %v", s.ServiceNodePortRange, (s.KubernetesServiceNodePort))
	}

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	cloud, err := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
	if err != nil {
		glog.Fatalf("Cloud provider could not be initialized: %v", err)
	}

	// Setup tunneler if needed
	var tunneler master.Tunneler
	var proxyDialerFn apiserver.ProxyDialerFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSH master.InstallSSHKey
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSH = instances.AddSSHKeyToAllInstances
			}
		}

		// Set up the tunneler
		tunneler = master.NewSSHTunneler(s.SSHUser, s.SSHKeyfile, installSSH)

		// Use the tunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = tunneler.Dial
		// Use the tunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = tunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	kubeletClient, err := client.NewKubeletClient(&s.KubeletConfig)
	if err != nil {
		glog.Fatalf("Failure to start kubelet client: %v", err)
	}

	apiGroupVersionOverrides, err := s.parseRuntimeConfig()
	if err != nil {
		glog.Fatalf("error in parsing runtime-config: %s", err)
	}

	clientConfig := &client.Config{
		Host:    net.JoinHostPort(s.InsecureBindAddress.String(), strconv.Itoa(s.InsecurePort)),
		Version: s.DeprecatedStorageVersion,
	}
	client, err := client.New(clientConfig)
	if err != nil {
		glog.Fatalf("Invalid server address: %v", err)
	}

	legacyV1Group, err := latest.Group("")
	if err != nil {
		return err
	}

	storageDestinations := master.NewStorageDestinations()

	storageVersions := generateStorageVersionMap(s.DeprecatedStorageVersion, s.StorageVersions)
	if _, found := storageVersions[legacyV1Group.Group]; !found {
		glog.Fatalf("Couldn't find the storage version for group: %q in storageVersions: %v", legacyV1Group.Group, storageVersions)
	}
	etcdStorage, err := newEtcd(s.EtcdConfigFile, s.EtcdServerList, legacyV1Group.InterfacesFor, storageVersions[legacyV1Group.Group], s.EtcdPathPrefix)
	if err != nil {
		glog.Fatalf("Invalid storage version or misconfigured etcd: %v", err)
	}
	storageDestinations.AddAPIGroup("", etcdStorage)

	if !apiGroupVersionOverrides["extensions/v1beta1"].Disable {
		expGroup, err := latest.Group("extensions")
		if err != nil {
			glog.Fatalf("Extensions API is enabled in runtime config, but not enabled in the environment variable KUBE_API_VERSIONS. Error: %v", err)
//.........这里部分代码省略.........

// Run runs the specified APIServer.  This should never exit.
func Run(s *options.APIServer) error {
	verifyClusterIPFlags(s)

	// If advertise-address is not specified, use bind-address. If bind-address
	// is not usable (unset, 0.0.0.0, or loopback), we will use the host's default
	// interface as valid public addr for master (see: util/net#ValidPublicAddrForMaster)
	if s.AdvertiseAddress == nil || s.AdvertiseAddress.IsUnspecified() {
		hostIP, err := utilnet.ChooseBindAddress(s.BindAddress)
		if err != nil {
			glog.Fatalf("Unable to find suitable network address.error='%v' . "+
				"Try to set the AdvertiseAddress directly or provide a valid BindAddress to fix this.", err)
		}
		s.AdvertiseAddress = hostIP
	}
	glog.Infof("Will report %v as public IP address.", s.AdvertiseAddress)

	if len(s.EtcdServerList) == 0 {
		glog.Fatalf("--etcd-servers must be specified")
	}

	if s.KubernetesServiceNodePort > 0 && !s.ServiceNodePortRange.Contains(s.KubernetesServiceNodePort) {
		glog.Fatalf("Kubernetes service port range %v doesn't contain %v", s.ServiceNodePortRange, (s.KubernetesServiceNodePort))
	}

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	cloud, err := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
	if err != nil {
		glog.Fatalf("Cloud provider could not be initialized: %v", err)
	}

	// Setup tunneler if needed
	var tunneler master.Tunneler
	var proxyDialerFn apiserver.ProxyDialerFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSH master.InstallSSHKey
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSH = instances.AddSSHKeyToAllInstances
			}
		}

		// Set up the tunneler
		tunneler = master.NewSSHTunneler(s.SSHUser, s.SSHKeyfile, installSSH)

		// Use the tunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = tunneler.Dial
		// Use the tunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = tunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	kubeletClient, err := kubeletclient.NewStaticKubeletClient(&s.KubeletConfig)
	if err != nil {
		glog.Fatalf("Failure to start kubelet client: %v", err)
	}

	apiGroupVersionOverrides, err := parseRuntimeConfig(s)
	if err != nil {
		glog.Fatalf("error in parsing runtime-config: %s", err)
	}

	clientConfig := &client.Config{
		Host: net.JoinHostPort(s.InsecureBindAddress.String(), strconv.Itoa(s.InsecurePort)),
	}
	if len(s.DeprecatedStorageVersion) != 0 {
		gv, err := unversioned.ParseGroupVersion(s.DeprecatedStorageVersion)
		if err != nil {
			glog.Fatalf("error in parsing group version: %s", err)
		}
		clientConfig.GroupVersion = &gv
	}

	client, err := client.New(clientConfig)
	if err != nil {
		glog.Fatalf("Invalid server address: %v", err)
	}

	legacyV1Group, err := registered.Group(api.GroupName)
	if err != nil {
		return err
	}

	storageDestinations := genericapiserver.NewStorageDestinations()

	storageVersions := generateStorageVersionMap(s.DeprecatedStorageVersion, s.StorageVersions)
	if _, found := storageVersions[legacyV1Group.GroupVersion.Group]; !found {
//.........这里部分代码省略.........

// Run runs the specified APIServer.  This should never exit.
func Run(s *options.APIServer) error {
	verifyClusterIPFlags(s)

	// If advertise-address is not specified, use bind-address. If bind-address
	// is not usable (unset, 0.0.0.0, or loopback), we will use the host's default
	// interface as valid public addr for master (see: util/net#ValidPublicAddrForMaster)
	if s.AdvertiseAddress == nil || s.AdvertiseAddress.IsUnspecified() {
		hostIP, err := utilnet.ChooseBindAddress(s.BindAddress)
		if err != nil {
			glog.Fatalf("Unable to find suitable network address.error='%v' . "+
				"Try to set the AdvertiseAddress directly or provide a valid BindAddress to fix this.", err)
		}
		s.AdvertiseAddress = hostIP
	}
	glog.Infof("Will report %v as public IP address.", s.AdvertiseAddress)

	if len(s.EtcdConfig.ServerList) == 0 {
		glog.Fatalf("--etcd-servers must be specified")
	}

	if s.KubernetesServiceNodePort > 0 && !s.ServiceNodePortRange.Contains(s.KubernetesServiceNodePort) {
		glog.Fatalf("Kubernetes service port range %v doesn't contain %v", s.ServiceNodePortRange, (s.KubernetesServiceNodePort))
	}

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	cloud, err := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
	if err != nil {
		glog.Fatalf("Cloud provider could not be initialized: %v", err)
	}

	// Setup tunneler if needed
	var tunneler master.Tunneler
	var proxyDialerFn apiserver.ProxyDialerFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSH master.InstallSSHKey
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSH = instances.AddSSHKeyToAllInstances
			}
		}
		if s.KubeletConfig.Port == 0 {
			glog.Fatalf("Must enable kubelet port if proxy ssh-tunneling is specified.")
		}
		// Set up the tunneler
		// TODO(cjcullen): If we want this to handle per-kubelet ports or other
		// kubelet listen-addresses, we need to plumb through options.
		healthCheckPath := &url.URL{
			Scheme: "https",
			Host:   net.JoinHostPort("127.0.0.1", strconv.FormatUint(uint64(s.KubeletConfig.Port), 10)),
			Path:   "healthz",
		}
		tunneler = master.NewSSHTunneler(s.SSHUser, s.SSHKeyfile, healthCheckPath, installSSH)

		// Use the tunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = tunneler.Dial
		// Use the tunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = tunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	kubeletClient, err := kubeletclient.NewStaticKubeletClient(&s.KubeletConfig)
	if err != nil {
		glog.Fatalf("Failure to start kubelet client: %v", err)
	}

	apiResourceConfigSource, err := parseRuntimeConfig(s)
	if err != nil {
		glog.Fatalf("error in parsing runtime-config: %s", err)
	}

	clientConfig := &restclient.Config{
		Host: net.JoinHostPort(s.InsecureBindAddress.String(), strconv.Itoa(s.InsecurePort)),
		// Increase QPS limits. The client is currently passed to all admission plugins,
		// and those can be throttled in case of higher load on apiserver - see #22340 and #22422
		// for more details. Once #22422 is fixed, we may want to remove it.
		QPS:   50,
		Burst: 100,
	}
	if len(s.DeprecatedStorageVersion) != 0 {
		gv, err := unversioned.ParseGroupVersion(s.DeprecatedStorageVersion)
		if err != nil {
			glog.Fatalf("error in parsing group version: %s", err)
		}
		clientConfig.GroupVersion = &gv
	}

//.........这里部分代码省略.........