Golang client.NewStaticKubeletClient函数代码示例

// Run runs the specified APIServer.  This should never exit.
func Run(s *options.APIServer) error {
	verifyClusterIPFlags(s)

	// If advertise-address is not specified, use bind-address. If bind-address
	// is not usable (unset, 0.0.0.0, or loopback), we will use the host's default
	// interface as valid public addr for master (see: util/net#ValidPublicAddrForMaster)
	if s.AdvertiseAddress == nil || s.AdvertiseAddress.IsUnspecified() {
		hostIP, err := utilnet.ChooseBindAddress(s.BindAddress)
		if err != nil {
			glog.Fatalf("Unable to find suitable network address.error='%v' . "+
				"Try to set the AdvertiseAddress directly or provide a valid BindAddress to fix this.", err)
		}
		s.AdvertiseAddress = hostIP
	}
	glog.Infof("Will report %v as public IP address.", s.AdvertiseAddress)

	if len(s.EtcdServerList) == 0 {
		glog.Fatalf("--etcd-servers must be specified")
	}

	if s.KubernetesServiceNodePort > 0 && !s.ServiceNodePortRange.Contains(s.KubernetesServiceNodePort) {
		glog.Fatalf("Kubernetes service port range %v doesn't contain %v", s.ServiceNodePortRange, (s.KubernetesServiceNodePort))
	}

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	cloud, err := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
	if err != nil {
		glog.Fatalf("Cloud provider could not be initialized: %v", err)
	}

	// Setup tunneler if needed
	var tunneler master.Tunneler
	var proxyDialerFn apiserver.ProxyDialerFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSH master.InstallSSHKey
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSH = instances.AddSSHKeyToAllInstances
			}
		}

		// Set up the tunneler
		tunneler = master.NewSSHTunneler(s.SSHUser, s.SSHKeyfile, installSSH)

		// Use the tunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = tunneler.Dial
		// Use the tunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = tunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	kubeletClient, err := kubeletclient.NewStaticKubeletClient(&s.KubeletConfig)
	if err != nil {
		glog.Fatalf("Failure to start kubelet client: %v", err)
	}

	apiGroupVersionOverrides, err := parseRuntimeConfig(s)
	if err != nil {
		glog.Fatalf("error in parsing runtime-config: %s", err)
	}

	clientConfig := &client.Config{
		Host: net.JoinHostPort(s.InsecureBindAddress.String(), strconv.Itoa(s.InsecurePort)),
	}
	if len(s.DeprecatedStorageVersion) != 0 {
		gv, err := unversioned.ParseGroupVersion(s.DeprecatedStorageVersion)
		if err != nil {
			glog.Fatalf("error in parsing group version: %s", err)
		}
		clientConfig.GroupVersion = &gv
	}

	client, err := client.New(clientConfig)
	if err != nil {
		glog.Fatalf("Invalid server address: %v", err)
	}

	legacyV1Group, err := registered.Group(api.GroupName)
	if err != nil {
		return err
	}

	storageDestinations := genericapiserver.NewStorageDestinations()

	storageVersions := generateStorageVersionMap(s.DeprecatedStorageVersion, s.StorageVersions)
	if _, found := storageVersions[legacyV1Group.GroupVersion.Group]; !found {
//.........这里部分代码省略.........

func BuildKubernetesMasterConfig(options configapi.MasterConfig, requestContextMapper kapi.RequestContextMapper, kubeClient *kclient.Client, pluginInitializer oadmission.PluginInitializer) (*MasterConfig, error) {
	if options.KubernetesMasterConfig == nil {
		return nil, errors.New("insufficient information to build KubernetesMasterConfig")
	}

	// Connect and setup etcd interfaces
	etcdClient, err := etcd.MakeNewEtcdClient(options.EtcdClientInfo)
	if err != nil {
		return nil, err
	}

	kubeletClientConfig := configapi.GetKubeletClientConfig(options)
	kubeletClient, err := kubeletclient.NewStaticKubeletClient(kubeletClientConfig)
	if err != nil {
		return nil, fmt.Errorf("unable to configure Kubelet client: %v", err)
	}

	// in-order list of plug-ins that should intercept admission decisions
	// TODO: Push node environment support to upstream in future

	_, portString, err := net.SplitHostPort(options.ServingInfo.BindAddress)
	if err != nil {
		return nil, err
	}
	port, err := strconv.Atoi(portString)
	if err != nil {
		return nil, err
	}

	portRange, err := knet.ParsePortRange(options.KubernetesMasterConfig.ServicesNodePortRange)
	if err != nil {
		return nil, err
	}

	podEvictionTimeout, err := time.ParseDuration(options.KubernetesMasterConfig.PodEvictionTimeout)
	if err != nil {
		return nil, fmt.Errorf("unable to parse PodEvictionTimeout: %v", err)
	}

	// Defaults are tested in TestAPIServerDefaults
	server := apiserveroptions.NewAPIServer()
	// Adjust defaults
	server.EventTTL = 2 * time.Hour
	server.ServiceClusterIPRange = net.IPNet(flagtypes.DefaultIPNet(options.KubernetesMasterConfig.ServicesSubnet))
	server.ServiceNodePortRange = *portRange
	server.AdmissionControl = strings.Join(AdmissionPlugins, ",")
	server.EnableLogsSupport = false // don't expose server logs

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.APIServerArguments, server.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	if len(options.KubernetesMasterConfig.AdmissionConfig.PluginOrderOverride) > 0 {
		server.AdmissionControl = strings.Join(options.KubernetesMasterConfig.AdmissionConfig.PluginOrderOverride, ",")
	}

	// Defaults are tested in TestCMServerDefaults
	cmserver := cmapp.NewCMServer()
	// Adjust defaults
	cmserver.Address = "" // no healthz endpoint
	cmserver.Port = 0     // no healthz endpoint
	cmserver.PodEvictionTimeout = unversioned.Duration{Duration: podEvictionTimeout}

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.ControllerArguments, cmserver.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	cloud, err := cloudprovider.InitCloudProvider(cmserver.CloudProvider, cmserver.CloudConfigFile)
	if err != nil {
		return nil, err
	}
	if cloud != nil {
		glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", server.CloudProvider, server.CloudConfigFile)
	}

	plugins := []admission.Interface{}
	for _, pluginName := range strings.Split(server.AdmissionControl, ",") {
		switch pluginName {
		case serviceadmit.ExternalIPPluginName:
			// this needs to be moved upstream to be part of core config
			reject, admit, err := serviceadmit.ParseCIDRRules(options.NetworkConfig.ExternalIPNetworkCIDRs)
			if err != nil {
				// should have been caught with validation
				return nil, err
			}
			plugins = append(plugins, serviceadmit.NewExternalIPRanger(reject, admit))
		case saadmit.PluginName:
			// we need to set some custom parameters on the service account admission controller, so create that one by hand
			saAdmitter := saadmit.NewServiceAccount(internalclientset.FromUnversionedClient(kubeClient))
			saAdmitter.LimitSecretReferences = options.ServiceAccountConfig.LimitSecretReferences
			saAdmitter.Run()
			plugins = append(plugins, saAdmitter)

		default:
//.........这里部分代码省略.........

// Run runs the specified APIServer.  This should never exit.
func Run(s *options.APIServer) error {
	genericvalidation.VerifyEtcdServersList(s.ServerRunOptions)
	genericapiserver.DefaultAndValidateRunOptions(s.ServerRunOptions)

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	// Setup tunneler if needed
	var tunneler genericapiserver.Tunneler
	var proxyDialerFn apiserver.ProxyDialerFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSH genericapiserver.InstallSSHKey
		cloud, err := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
		if err != nil {
			glog.Fatalf("Cloud provider could not be initialized: %v", err)
		}
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSH = instances.AddSSHKeyToAllInstances
			}
		}
		if s.KubeletConfig.Port == 0 {
			glog.Fatalf("Must enable kubelet port if proxy ssh-tunneling is specified.")
		}
		// Set up the tunneler
		// TODO(cjcullen): If we want this to handle per-kubelet ports or other
		// kubelet listen-addresses, we need to plumb through options.
		healthCheckPath := &url.URL{
			Scheme: "https",
			Host:   net.JoinHostPort("127.0.0.1", strconv.FormatUint(uint64(s.KubeletConfig.Port), 10)),
			Path:   "healthz",
		}
		tunneler = genericapiserver.NewSSHTunneler(s.SSHUser, s.SSHKeyfile, healthCheckPath, installSSH)

		// Use the tunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = tunneler.Dial
		// Use the tunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = tunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	kubeletClient, err := kubeletclient.NewStaticKubeletClient(&s.KubeletConfig)
	if err != nil {
		glog.Fatalf("Failed to start kubelet client: %v", err)
	}

	storageGroupsToEncodingVersion, err := s.StorageGroupsToEncodingVersion()
	if err != nil {
		glog.Fatalf("error generating storage version map: %s", err)
	}
	storageFactory, err := genericapiserver.BuildDefaultStorageFactory(
		s.StorageConfig, s.DefaultStorageMediaType, api.Codecs,
		genericapiserver.NewDefaultResourceEncodingConfig(), storageGroupsToEncodingVersion,
		// FIXME: this GroupVersionResource override should be configurable
		[]unversioned.GroupVersionResource{batch.Resource("scheduledjobs").WithVersion("v2alpha1")},
		master.DefaultAPIResourceConfigSource(), s.RuntimeConfig)
	if err != nil {
		glog.Fatalf("error in initializing storage factory: %s", err)
	}
	storageFactory.AddCohabitatingResources(batch.Resource("jobs"), extensions.Resource("jobs"))
	storageFactory.AddCohabitatingResources(autoscaling.Resource("horizontalpodautoscalers"), extensions.Resource("horizontalpodautoscalers"))
	for _, override := range s.EtcdServersOverrides {
		tokens := strings.Split(override, "#")
		if len(tokens) != 2 {
			glog.Errorf("invalid value of etcd server overrides: %s", override)
			continue
		}

		apiresource := strings.Split(tokens[0], "/")
		if len(apiresource) != 2 {
			glog.Errorf("invalid resource definition: %s", tokens[0])
			continue
		}
		group := apiresource[0]
		resource := apiresource[1]
		groupResource := unversioned.GroupResource{Group: group, Resource: resource}

		servers := strings.Split(tokens[1], ";")
		storageFactory.SetEtcdLocation(groupResource, servers)
	}

	// Default to the private server key for service account token signing
	if s.ServiceAccountKeyFile == "" && s.TLSPrivateKeyFile != "" {
		if authenticator.IsValidServiceAccountKeyFile(s.TLSPrivateKeyFile) {
			s.ServiceAccountKeyFile = s.TLSPrivateKeyFile
		} else {
			glog.Warning("No RSA key provided, service account token authentication disabled")
		}
//.........这里部分代码省略.........

// Run runs the specified APIServer.  This should never exit.
func Run(s *options.APIServer) error {
	verifyClusterIPFlags(s)

	// If advertise-address is not specified, use bind-address. If bind-address
	// is not usable (unset, 0.0.0.0, or loopback), we will use the host's default
	// interface as valid public addr for master (see: util/net#ValidPublicAddrForMaster)
	if s.AdvertiseAddress == nil || s.AdvertiseAddress.IsUnspecified() {
		hostIP, err := utilnet.ChooseBindAddress(s.BindAddress)
		if err != nil {
			glog.Fatalf("Unable to find suitable network address.error='%v' . "+
				"Try to set the AdvertiseAddress directly or provide a valid BindAddress to fix this.", err)
		}
		s.AdvertiseAddress = hostIP
	}
	glog.Infof("Will report %v as public IP address.", s.AdvertiseAddress)

	if len(s.EtcdConfig.ServerList) == 0 {
		glog.Fatalf("--etcd-servers must be specified")
	}

	if s.KubernetesServiceNodePort > 0 && !s.ServiceNodePortRange.Contains(s.KubernetesServiceNodePort) {
		glog.Fatalf("Kubernetes service port range %v doesn't contain %v", s.ServiceNodePortRange, (s.KubernetesServiceNodePort))
	}

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	cloud, err := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
	if err != nil {
		glog.Fatalf("Cloud provider could not be initialized: %v", err)
	}

	// Setup tunneler if needed
	var tunneler master.Tunneler
	var proxyDialerFn apiserver.ProxyDialerFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSH master.InstallSSHKey
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSH = instances.AddSSHKeyToAllInstances
			}
		}
		if s.KubeletConfig.Port == 0 {
			glog.Fatalf("Must enable kubelet port if proxy ssh-tunneling is specified.")
		}
		// Set up the tunneler
		// TODO(cjcullen): If we want this to handle per-kubelet ports or other
		// kubelet listen-addresses, we need to plumb through options.
		healthCheckPath := &url.URL{
			Scheme: "https",
			Host:   net.JoinHostPort("127.0.0.1", strconv.FormatUint(uint64(s.KubeletConfig.Port), 10)),
			Path:   "healthz",
		}
		tunneler = master.NewSSHTunneler(s.SSHUser, s.SSHKeyfile, healthCheckPath, installSSH)

		// Use the tunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = tunneler.Dial
		// Use the tunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = tunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	kubeletClient, err := kubeletclient.NewStaticKubeletClient(&s.KubeletConfig)
	if err != nil {
		glog.Fatalf("Failure to start kubelet client: %v", err)
	}

	apiResourceConfigSource, err := parseRuntimeConfig(s)
	if err != nil {
		glog.Fatalf("error in parsing runtime-config: %s", err)
	}

	clientConfig := &restclient.Config{
		Host: net.JoinHostPort(s.InsecureBindAddress.String(), strconv.Itoa(s.InsecurePort)),
		// Increase QPS limits. The client is currently passed to all admission plugins,
		// and those can be throttled in case of higher load on apiserver - see #22340 and #22422
		// for more details. Once #22422 is fixed, we may want to remove it.
		QPS:   50,
		Burst: 100,
	}
	if len(s.DeprecatedStorageVersion) != 0 {
		gv, err := unversioned.ParseGroupVersion(s.DeprecatedStorageVersion)
		if err != nil {
			glog.Fatalf("error in parsing group version: %s", err)
		}
		clientConfig.GroupVersion = &gv
	}

//.........这里部分代码省略.........

func (c *MasterConfig) GetRestStorage() map[string]rest.Storage {
	kubeletClient, err := kubeletclient.NewStaticKubeletClient(c.KubeletClientConfig)
	if err != nil {
		glog.Fatalf("Unable to configure Kubelet client: %v", err)
	}

	// TODO: allow the system CAs and the local CAs to be joined together.
	importTransport, err := restclient.TransportFor(&restclient.Config{})
	if err != nil {
		glog.Fatalf("Unable to configure a default transport for importing: %v", err)
	}
	insecureImportTransport, err := restclient.TransportFor(&restclient.Config{Insecure: true})
	if err != nil {
		glog.Fatalf("Unable to configure a default transport for importing: %v", err)
	}

	buildStorage, buildDetailsStorage, err := buildetcd.NewREST(c.RESTOptionsGetter)
	checkStorageErr(err)
	buildRegistry := buildregistry.NewRegistry(buildStorage)

	buildConfigStorage, err := buildconfigetcd.NewREST(c.RESTOptionsGetter)
	checkStorageErr(err)
	buildConfigRegistry := buildconfigregistry.NewRegistry(buildConfigStorage)

	deployConfigStorage, deployConfigStatusStorage, deployConfigScaleStorage, err := deployconfigetcd.NewREST(c.RESTOptionsGetter)

	dcInstantiateOriginClient, dcInstantiateKubeClient := c.DeploymentConfigInstantiateClients()
	dcInstantiateStorage := deployconfiginstantiate.NewREST(
		*deployConfigStorage.Store,
		dcInstantiateOriginClient,
		dcInstantiateKubeClient,
		c.ExternalVersionCodec,
		c.AdmissionControl,
	)

	checkStorageErr(err)
	deployConfigRegistry := deployconfigregistry.NewRegistry(deployConfigStorage)

	routeAllocator := c.RouteAllocator()

	routeStorage, routeStatusStorage, err := routeetcd.NewREST(c.RESTOptionsGetter, routeAllocator)
	checkStorageErr(err)

	hostSubnetStorage, err := hostsubnetetcd.NewREST(c.RESTOptionsGetter)
	checkStorageErr(err)
	netNamespaceStorage, err := netnamespaceetcd.NewREST(c.RESTOptionsGetter)
	checkStorageErr(err)
	clusterNetworkStorage, err := clusternetworketcd.NewREST(c.RESTOptionsGetter)
	checkStorageErr(err)
	egressNetworkPolicyStorage, err := egressnetworkpolicyetcd.NewREST(c.RESTOptionsGetter)
	checkStorageErr(err)

	userStorage, err := useretcd.NewREST(c.RESTOptionsGetter)
	checkStorageErr(err)
	userRegistry := userregistry.NewRegistry(userStorage)
	identityStorage, err := identityetcd.NewREST(c.RESTOptionsGetter)
	checkStorageErr(err)
	identityRegistry := identityregistry.NewRegistry(identityStorage)
	userIdentityMappingStorage := useridentitymapping.NewREST(userRegistry, identityRegistry)
	groupStorage, err := groupetcd.NewREST(c.RESTOptionsGetter)
	checkStorageErr(err)

	policyStorage, err := policyetcd.NewStorage(c.RESTOptionsGetter)
	checkStorageErr(err)
	policyRegistry := policyregistry.NewRegistry(policyStorage)
	policyBindingStorage, err := policybindingetcd.NewStorage(c.RESTOptionsGetter)
	checkStorageErr(err)
	policyBindingRegistry := policybindingregistry.NewRegistry(policyBindingStorage)

	clusterPolicyStorage, err := clusterpolicystorage.NewStorage(c.RESTOptionsGetter)
	checkStorageErr(err)
	clusterPolicyRegistry := clusterpolicyregistry.NewRegistry(clusterPolicyStorage)
	clusterPolicyBindingStorage, err := clusterpolicybindingstorage.NewStorage(c.RESTOptionsGetter)
	checkStorageErr(err)
	clusterPolicyBindingRegistry := clusterpolicybindingregistry.NewRegistry(clusterPolicyBindingStorage)

	selfSubjectRulesReviewStorage := selfsubjectrulesreview.NewREST(c.RuleResolver, c.Informers.ClusterPolicies().Lister().ClusterPolicies())
	subjectRulesReviewStorage := subjectrulesreview.NewREST(c.RuleResolver, c.Informers.ClusterPolicies().Lister().ClusterPolicies())

	roleStorage := rolestorage.NewVirtualStorage(policyRegistry, c.RuleResolver)
	roleBindingStorage := rolebindingstorage.NewVirtualStorage(policyBindingRegistry, c.RuleResolver)
	clusterRoleStorage := clusterrolestorage.NewClusterRoleStorage(clusterPolicyRegistry, clusterPolicyBindingRegistry)
	clusterRoleBindingStorage := clusterrolebindingstorage.NewClusterRoleBindingStorage(clusterPolicyRegistry, clusterPolicyBindingRegistry)

	subjectAccessReviewStorage := subjectaccessreview.NewREST(c.Authorizer)
	subjectAccessReviewRegistry := subjectaccessreview.NewRegistry(subjectAccessReviewStorage)
	localSubjectAccessReviewStorage := localsubjectaccessreview.NewREST(subjectAccessReviewRegistry)
	resourceAccessReviewStorage := resourceaccessreview.NewREST(c.Authorizer)
	resourceAccessReviewRegistry := resourceaccessreview.NewRegistry(resourceAccessReviewStorage)
	localResourceAccessReviewStorage := localresourceaccessreview.NewREST(resourceAccessReviewRegistry)

	podSecurityPolicyReviewStorage := podsecuritypolicyreview.NewREST(oscc.NewDefaultSCCMatcher(c.Informers.SecurityContextConstraints().Lister()), clientadapter.FromUnversionedClient(c.PrivilegedLoopbackKubernetesClient))
	podSecurityPolicySubjectStorage := podsecuritypolicysubjectreview.NewREST(oscc.NewDefaultSCCMatcher(c.Informers.SecurityContextConstraints().Lister()), clientadapter.FromUnversionedClient(c.PrivilegedLoopbackKubernetesClient))
	podSecurityPolicySelfSubjectReviewStorage := podsecuritypolicyselfsubjectreview.NewREST(oscc.NewDefaultSCCMatcher(c.Informers.SecurityContextConstraints().Lister()), clientadapter.FromUnversionedClient(c.PrivilegedLoopbackKubernetesClient))

	imageStorage, err := imageetcd.NewREST(c.RESTOptionsGetter)
	checkStorageErr(err)
	imageRegistry := image.NewRegistry(imageStorage)
	imageSignatureStorage := imagesignature.NewREST(c.PrivilegedLoopbackOpenShiftClient.Images())
	imageStreamSecretsStorage := imagesecret.NewREST(c.ImageStreamSecretClient())
//.........这里部分代码省略.........

// Run runs the specified APIServer.  This should never exit.
func (s *APIServer) Run(_ []string) error {
	s.verifyClusterIPFlags()

	// If advertise-address is not specified, use bind-address. If bind-address
	// is not usable (unset, 0.0.0.0, or loopback), we will use the host's default
	// interface as valid public addr for master (see: util#ValidPublicAddrForMaster)
	if s.AdvertiseAddress == nil || s.AdvertiseAddress.IsUnspecified() {
		hostIP, err := util.ValidPublicAddrForMaster(s.BindAddress)
		if err != nil {
			glog.Fatalf("Unable to find suitable network address.error='%v' . "+
				"Try to set the AdvertiseAddress directly or provide a valid BindAddress to fix this.", err)
		}
		s.AdvertiseAddress = hostIP
	}
	glog.Infof("Will report %v as public IP address.", s.AdvertiseAddress)

	if (s.EtcdConfigFile != "" && len(s.EtcdServerList) != 0) || (s.EtcdConfigFile == "" && len(s.EtcdServerList) == 0) {
		glog.Fatalf("Specify either --etcd-servers or --etcd-config")
	}

	if s.KubernetesServiceNodePort > 0 && !s.ServiceNodePortRange.Contains(s.KubernetesServiceNodePort) {
		glog.Fatalf("Kubernetes service port range %v doesn't contain %v", s.ServiceNodePortRange, (s.KubernetesServiceNodePort))
	}

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	cloud, err := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
	if err != nil {
		glog.Fatalf("Cloud provider could not be initialized: %v", err)
	}

	// Setup tunneler if needed
	var tunneler master.Tunneler
	var proxyDialerFn apiserver.ProxyDialerFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSH master.InstallSSHKey
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSH = instances.AddSSHKeyToAllInstances
			}
		}

		// Set up the tunneler
		tunneler = master.NewSSHTunneler(s.SSHUser, s.SSHKeyfile, installSSH)

		// Use the tunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = tunneler.Dial
		// Use the tunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = tunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	kubeletClient, err := kubeletclient.NewStaticKubeletClient(&s.KubeletConfig)
	if err != nil {
		glog.Fatalf("Failure to start kubelet client: %v", err)
	}

	apiGroupVersionOverrides, err := s.parseRuntimeConfig()
	if err != nil {
		glog.Fatalf("error in parsing runtime-config: %s", err)
	}

	clientConfig := &client.Config{
		Host: net.JoinHostPort(s.InsecureBindAddress.String(), strconv.Itoa(s.InsecurePort)),
	}
	if len(s.DeprecatedStorageVersion) != 0 {
		gv, err := unversioned.ParseGroupVersion(s.DeprecatedStorageVersion)
		if err != nil {
			glog.Fatalf("error in parsing group version: %s", err)
		}
		clientConfig.GroupVersion = &gv
	}

	client, err := client.New(clientConfig)
	if err != nil {
		glog.Fatalf("Invalid server address: %v", err)
	}

	legacyV1Group, err := latest.Group("")
	if err != nil {
		return err
	}

	storageDestinations := master.NewStorageDestinations()

	storageVersions := generateStorageVersionMap(s.DeprecatedStorageVersion, s.StorageVersions)
	if _, found := storageVersions[legacyV1Group.GroupVersion.Group]; !found {
//.........这里部分代码省略.........

func (c *MasterConfig) GetRestStorage() map[string]rest.Storage {
	defaultRegistry := env("OPENSHIFT_DEFAULT_REGISTRY", "${DOCKER_REGISTRY_SERVICE_HOST}:${DOCKER_REGISTRY_SERVICE_PORT}")
	svcCache := service.NewServiceResolverCache(c.KubeClient().Services(kapi.NamespaceDefault).Get)
	defaultRegistryFunc, err := svcCache.Defer(defaultRegistry)
	if err != nil {
		glog.Fatalf("OPENSHIFT_DEFAULT_REGISTRY variable is invalid %q: %v", defaultRegistry, err)
	}

	kubeletClient, err := kubeletclient.NewStaticKubeletClient(c.KubeletClientConfig)
	if err != nil {
		glog.Fatalf("Unable to configure Kubelet client: %v", err)
	}

	// TODO: allow the system CAs and the local CAs to be joined together.
	importTransport, err := restclient.TransportFor(&restclient.Config{})
	if err != nil {
		glog.Fatalf("Unable to configure a default transport for importing: %v", err)
	}
	insecureImportTransport, err := restclient.TransportFor(&restclient.Config{Insecure: true})
	if err != nil {
		glog.Fatalf("Unable to configure a default transport for importing: %v", err)
	}

	applicationStorage := application.NewREST(c.EtcdHelper, c.PrivilegedLoopbackOpenShiftClient, c.PrivilegedLoopbackKubernetesClient)
	serviceBrokerStorage := servicebroker.NewREST(c.EtcdHelper, c.BackingServiceInstanceControllerClients())
	backingServiceStorage := backingservice.NewREST(c.EtcdHelper, c.BackingServiceInstanceControllerClients())

	buildStorage, buildDetailsStorage := buildetcd.NewREST(c.EtcdHelper)
	buildRegistry := buildregistry.NewRegistry(buildStorage)

	buildConfigStorage := buildconfigetcd.NewREST(c.EtcdHelper)
	buildConfigRegistry := buildconfigregistry.NewRegistry(buildConfigStorage)

	deployConfigStorage, deployConfigScaleStorage := deployconfigetcd.NewREST(c.EtcdHelper, c.DeploymentConfigScaleClient())
	deployConfigRegistry := deployconfigregistry.NewRegistry(deployConfigStorage)

	routeAllocator := c.RouteAllocator()

	routeStorage, routeStatusStorage := routeetcd.NewREST(c.EtcdHelper, routeAllocator)
	hostSubnetStorage := hostsubnetetcd.NewREST(c.EtcdHelper)
	netNamespaceStorage := netnamespaceetcd.NewREST(c.EtcdHelper)
	clusterNetworkStorage := clusternetworketcd.NewREST(c.EtcdHelper)

	userStorage := useretcd.NewREST(c.EtcdHelper)
	userRegistry := userregistry.NewRegistry(userStorage)
	identityStorage := identityetcd.NewREST(c.EtcdHelper)
	identityRegistry := identityregistry.NewRegistry(identityStorage)
	userIdentityMappingStorage := useridentitymapping.NewREST(userRegistry, identityRegistry)

	policyStorage := policyetcd.NewStorage(c.EtcdHelper)
	policyRegistry := policyregistry.NewRegistry(policyStorage)
	policyBindingStorage := policybindingetcd.NewStorage(c.EtcdHelper)
	policyBindingRegistry := policybindingregistry.NewRegistry(policyBindingStorage)

	clusterPolicyStorage := clusterpolicystorage.NewStorage(c.EtcdHelper)
	clusterPolicyRegistry := clusterpolicyregistry.NewRegistry(clusterPolicyStorage)
	clusterPolicyBindingStorage := clusterpolicybindingstorage.NewStorage(c.EtcdHelper)
	clusterPolicyBindingRegistry := clusterpolicybindingregistry.NewRegistry(clusterPolicyBindingStorage)

	ruleResolver := rulevalidation.NewDefaultRuleResolver(
		policyRegistry,
		policyBindingRegistry,
		clusterPolicyRegistry,
		clusterPolicyBindingRegistry,
	)

	roleStorage := rolestorage.NewVirtualStorage(policyRegistry, ruleResolver)
	roleBindingStorage := rolebindingstorage.NewVirtualStorage(policyBindingRegistry, ruleResolver)
	clusterRoleStorage := clusterrolestorage.NewClusterRoleStorage(clusterPolicyRegistry, clusterPolicyBindingRegistry)
	clusterRoleBindingStorage := clusterrolebindingstorage.NewClusterRoleBindingStorage(clusterPolicyRegistry, clusterPolicyBindingRegistry)

	subjectAccessReviewStorage := subjectaccessreview.NewREST(c.Authorizer)
	subjectAccessReviewRegistry := subjectaccessreview.NewRegistry(subjectAccessReviewStorage)
	localSubjectAccessReviewStorage := localsubjectaccessreview.NewREST(subjectAccessReviewRegistry)
	resourceAccessReviewStorage := resourceaccessreview.NewREST(c.Authorizer)
	resourceAccessReviewRegistry := resourceaccessreview.NewRegistry(resourceAccessReviewStorage)
	localResourceAccessReviewStorage := localresourceaccessreview.NewREST(resourceAccessReviewRegistry)

	imageStorage := imageetcd.NewREST(c.EtcdHelper)
	imageRegistry := image.NewRegistry(imageStorage)
	imageStreamSecretsStorage := imagesecret.NewREST(c.ImageStreamSecretClient())
	imageStreamStorage, imageStreamStatusStorage, internalImageStreamStorage := imagestreametcd.NewREST(c.EtcdHelper, imagestream.DefaultRegistryFunc(defaultRegistryFunc), subjectAccessReviewRegistry)
	imageStreamRegistry := imagestream.NewRegistry(imageStreamStorage, imageStreamStatusStorage, internalImageStreamStorage)
	imageStreamMappingStorage := imagestreammapping.NewREST(imageRegistry, imageStreamRegistry)
	imageStreamTagStorage := imagestreamtag.NewREST(imageRegistry, imageStreamRegistry)
	imageStreamTagRegistry := imagestreamtag.NewRegistry(imageStreamTagStorage)
	importerFn := func(r importer.RepositoryRetriever) imageimporter.Interface {
		return imageimporter.NewImageStreamImporter(r, c.Options.ImagePolicyConfig.MaxImagesBulkImportedPerRepository, util.NewTokenBucketRateLimiter(2.0, 3))
	}
	importerDockerClientFn := func() dockerregistry.Client {
		return dockerregistry.NewClient(20*time.Second, false)
	}
	imageStreamImportStorage := imagestreamimport.NewREST(importerFn, imageStreamRegistry, internalImageStreamStorage, imageStorage, c.ImageStreamImportSecretClient(), importTransport, insecureImportTransport, importerDockerClientFn)
	imageStreamImageStorage := imagestreamimage.NewREST(imageRegistry, imageStreamRegistry)
	imageStreamImageRegistry := imagestreamimage.NewRegistry(imageStreamImageStorage)

	backingServiceInstanceEtcd := backingserviceinstanceetcd.NewREST(c.EtcdHelper)
	backingServiceInstanceRegistry := backingserviceinstanceregistry.NewRegistry(backingServiceInstanceEtcd)
	backingServiceInstanceBindingEtcd := backingserviceinstanceetcd.NewBindingREST(backingServiceInstanceRegistry, deployConfigRegistry)

//.........这里部分代码省略.........

// Run runs the specified APIServer.  This should never exit.
func Run(s *options.APIServer) error {
	genericapiserver.DefaultAndValidateRunOptions(s.ServerRunOptions)

	if len(s.StorageConfig.ServerList) == 0 {
		glog.Fatalf("--etcd-servers must be specified")
	}

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	cloud, err := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
	if err != nil {
		glog.Fatalf("Cloud provider could not be initialized: %v", err)
	}

	// Setup tunneler if needed
	var tunneler genericapiserver.Tunneler
	var proxyDialerFn apiserver.ProxyDialerFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSH genericapiserver.InstallSSHKey
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSH = instances.AddSSHKeyToAllInstances
			}
		}
		if s.KubeletConfig.Port == 0 {
			glog.Fatalf("Must enable kubelet port if proxy ssh-tunneling is specified.")
		}
		// Set up the tunneler
		// TODO(cjcullen): If we want this to handle per-kubelet ports or other
		// kubelet listen-addresses, we need to plumb through options.
		healthCheckPath := &url.URL{
			Scheme: "https",
			Host:   net.JoinHostPort("127.0.0.1", strconv.FormatUint(uint64(s.KubeletConfig.Port), 10)),
			Path:   "healthz",
		}
		tunneler = genericapiserver.NewSSHTunneler(s.SSHUser, s.SSHKeyfile, healthCheckPath, installSSH)

		// Use the tunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = tunneler.Dial
		// Use the tunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = tunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	kubeletClient, err := kubeletclient.NewStaticKubeletClient(&s.KubeletConfig)
	if err != nil {
		glog.Fatalf("Failure to start kubelet client: %v", err)
	}

	apiResourceConfigSource, err := parseRuntimeConfig(s)
	if err != nil {
		glog.Fatalf("error in parsing runtime-config: %s", err)
	}

	clientConfig := &restclient.Config{
		Host: net.JoinHostPort(s.InsecureBindAddress.String(), strconv.Itoa(s.InsecurePort)),
		// Increase QPS limits. The client is currently passed to all admission plugins,
		// and those can be throttled in case of higher load on apiserver - see #22340 and #22422
		// for more details. Once #22422 is fixed, we may want to remove it.
		QPS:   50,
		Burst: 100,
	}
	if len(s.DeprecatedStorageVersion) != 0 {
		gv, err := unversioned.ParseGroupVersion(s.DeprecatedStorageVersion)
		if err != nil {
			glog.Fatalf("error in parsing group version: %s", err)
		}
		clientConfig.GroupVersion = &gv
	}

	client, err := clientset.NewForConfig(clientConfig)
	if err != nil {
		glog.Errorf("Failed to create clientset: %v", err)
	}

	resourceEncoding := genericapiserver.NewDefaultResourceEncodingConfig()
	groupToEncoding, err := s.StorageGroupsToEncodingVersion()
	if err != nil {
		glog.Fatalf("error getting group encoding: %s", err)
	}
	for group, storageEncodingVersion := range groupToEncoding {
		resourceEncoding.SetVersionEncoding(group, storageEncodingVersion, unversioned.GroupVersion{Group: group, Version: runtime.APIVersionInternal})
	}

	storageFactory := genericapiserver.NewDefaultStorageFactory(s.StorageConfig, api.Codecs, resourceEncoding, apiResourceConfigSource)
	storageFactory.AddCohabitatingResources(batch.Resource("jobs"), extensions.Resource("jobs"))
	storageFactory.AddCohabitatingResources(autoscaling.Resource("horizontalpodautoscalers"), extensions.Resource("horizontalpodautoscalers"))
//.........这里部分代码省略.........

// Run runs the specified APIServer.  This should never exit.
func Run(s *options.APIServer) error {
	genericapiserver.DefaultAndValidateRunOptions(s.ServerRunOptions)

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	// Setup tunneler if needed
	var tunneler genericapiserver.Tunneler
	var proxyDialerFn apiserver.ProxyDialerFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSH genericapiserver.InstallSSHKey
		cloud, err := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
		if err != nil {
			glog.Fatalf("Cloud provider could not be initialized: %v", err)
		}
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSH = instances.AddSSHKeyToAllInstances
			}
		}
		if s.KubeletConfig.Port == 0 {
			glog.Fatalf("Must enable kubelet port if proxy ssh-tunneling is specified.")
		}
		// Set up the tunneler
		// TODO(cjcullen): If we want this to handle per-kubelet ports or other
		// kubelet listen-addresses, we need to plumb through options.
		healthCheckPath := &url.URL{
			Scheme: "https",
			Host:   net.JoinHostPort("127.0.0.1", strconv.FormatUint(uint64(s.KubeletConfig.Port), 10)),
			Path:   "healthz",
		}
		tunneler = genericapiserver.NewSSHTunneler(s.SSHUser, s.SSHKeyfile, healthCheckPath, installSSH)

		// Use the tunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = tunneler.Dial
		// Use the tunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = tunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	kubeletClient, err := kubeletclient.NewStaticKubeletClient(&s.KubeletConfig)
	if err != nil {
		glog.Fatalf("Failure to start kubelet client: %v", err)
	}

	storageGroupsToEncodingVersion, err := s.StorageGroupsToEncodingVersion()
	if err != nil {
		glog.Fatalf("error generating storage version map: %s", err)
	}
	storageFactory, err := genericapiserver.BuildDefaultStorageFactory(
		s.StorageConfig, s.DefaultStorageMediaType, api.Codecs,
		genericapiserver.NewDefaultResourceEncodingConfig(), storageGroupsToEncodingVersion,
		master.DefaultAPIResourceConfigSource(), s.RuntimeConfig)
	if err != nil {
		glog.Fatalf("error in initializing storage factory: %s", err)
	}
	storageFactory.AddCohabitatingResources(batch.Resource("jobs"), extensions.Resource("jobs"))
	storageFactory.AddCohabitatingResources(autoscaling.Resource("horizontalpodautoscalers"), extensions.Resource("horizontalpodautoscalers"))
	for _, override := range s.EtcdServersOverrides {
		tokens := strings.Split(override, "#")
		if len(tokens) != 2 {
			glog.Errorf("invalid value of etcd server overrides: %s", override)
			continue
		}

		apiresource := strings.Split(tokens[0], "/")
		if len(apiresource) != 2 {
			glog.Errorf("invalid resource definition: %s", tokens[0])
			continue
		}
		group := apiresource[0]
		resource := apiresource[1]
		groupResource := unversioned.GroupResource{Group: group, Resource: resource}

		servers := strings.Split(tokens[1], ";")
		storageFactory.SetEtcdLocation(groupResource, servers)
	}

	// Default to the private server key for service account token signing
	if s.ServiceAccountKeyFile == "" && s.TLSPrivateKeyFile != "" {
		if authenticator.IsValidServiceAccountKeyFile(s.TLSPrivateKeyFile) {
			s.ServiceAccountKeyFile = s.TLSPrivateKeyFile
		} else {
			glog.Warning("No RSA key provided, service account token authentication disabled")
		}
	}

	var serviceAccountGetter serviceaccount.ServiceAccountTokenGetter
//.........这里部分代码省略.........

func BuildKubernetesMasterConfig(options configapi.MasterConfig, requestContextMapper kapi.RequestContextMapper, kubeClient *kclient.Client, informers shared.InformerFactory, admissionControl admission.Interface, originAuthenticator authenticator.Request) (*MasterConfig, error) {
	if options.KubernetesMasterConfig == nil {
		return nil, errors.New("insufficient information to build KubernetesMasterConfig")
	}

	kubeletClientConfig := configapi.GetKubeletClientConfig(options)
	kubeletClient, err := kubeletclient.NewStaticKubeletClient(kubeletClientConfig)
	if err != nil {
		return nil, fmt.Errorf("unable to configure Kubelet client: %v", err)
	}

	// in-order list of plug-ins that should intercept admission decisions
	// TODO: Push node environment support to upstream in future

	podEvictionTimeout, err := time.ParseDuration(options.KubernetesMasterConfig.PodEvictionTimeout)
	if err != nil {
		return nil, fmt.Errorf("unable to parse PodEvictionTimeout: %v", err)
	}

	// Defaults are tested in TestCMServerDefaults
	cmserver := cmapp.NewCMServer()
	// Adjust defaults
	cmserver.Address = ""                   // no healthz endpoint
	cmserver.Port = 0                       // no healthz endpoint
	cmserver.EnableGarbageCollector = false // disabled until we add the controller
	cmserver.PodEvictionTimeout = unversioned.Duration{Duration: podEvictionTimeout}
	cmserver.VolumeConfiguration.EnableDynamicProvisioning = options.VolumeConfig.DynamicProvisioningEnabled

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.ControllerArguments, cmserver.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	schedulerserver := scheduleroptions.NewSchedulerServer()
	schedulerserver.PolicyConfigFile = options.KubernetesMasterConfig.SchedulerConfigFile
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.SchedulerArguments, schedulerserver.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	cloud, err := cloudprovider.InitCloudProvider(cmserver.CloudProvider, cmserver.CloudConfigFile)
	if err != nil {
		return nil, err
	}
	if cloud != nil {
		glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", cmserver.CloudProvider, cmserver.CloudConfigFile)
	}

	var proxyClientCerts []tls.Certificate
	if len(options.KubernetesMasterConfig.ProxyClientInfo.CertFile) > 0 {
		clientCert, err := tls.LoadX509KeyPair(
			options.KubernetesMasterConfig.ProxyClientInfo.CertFile,
			options.KubernetesMasterConfig.ProxyClientInfo.KeyFile,
		)
		if err != nil {
			return nil, err
		}
		proxyClientCerts = append(proxyClientCerts, clientCert)
	}

	server, storageFactory, err := BuildDefaultAPIServer(options)
	if err != nil {
		return nil, err
	}

	// Preserve previous behavior of using the first non-loopback address
	// TODO: Deprecate this behavior and just require a valid value to be passed in
	publicAddress := net.ParseIP(options.KubernetesMasterConfig.MasterIP)
	if publicAddress == nil || publicAddress.IsUnspecified() || publicAddress.IsLoopback() {
		hostIP, err := knet.ChooseHostInterface()
		if err != nil {
			glog.Fatalf("Unable to find suitable network address.error='%v'. Set the masterIP directly to avoid this error.", err)
		}
		publicAddress = hostIP
		glog.Infof("Will report %v as public IP address.", publicAddress)
	}

	m := &master.Config{
		Config: &genericapiserver.Config{

			PublicAddress: publicAddress,
			ReadWritePort: server.SecurePort,

			Authenticator:    originAuthenticator, // this is used to fulfill the tokenreviews endpoint which is used by node authentication
			Authorizer:       authorizer.NewAlwaysAllowAuthorizer(),
			AdmissionControl: admissionControl,

			StorageFactory: storageFactory,

			ServiceClusterIPRange: (*net.IPNet)(&server.ServiceClusterIPRange),
			ServiceNodePortRange:  server.ServiceNodePortRange,

			RequestContextMapper: requestContextMapper,

			APIResourceConfigSource: getAPIResourceConfig(options),
			APIPrefix:               server.APIPrefix,
//.........这里部分代码省略.........

func BuildKubernetesMasterConfig(options configapi.MasterConfig, requestContextMapper kapi.RequestContextMapper, kubeClient *kclient.Client, informers shared.InformerFactory, pluginInitializer oadmission.PluginInitializer) (*MasterConfig, error) {
	if options.KubernetesMasterConfig == nil {
		return nil, errors.New("insufficient information to build KubernetesMasterConfig")
	}

	kubeletClientConfig := configapi.GetKubeletClientConfig(options)
	kubeletClient, err := kubeletclient.NewStaticKubeletClient(kubeletClientConfig)
	if err != nil {
		return nil, fmt.Errorf("unable to configure Kubelet client: %v", err)
	}

	// in-order list of plug-ins that should intercept admission decisions
	// TODO: Push node environment support to upstream in future

	_, portString, err := net.SplitHostPort(options.ServingInfo.BindAddress)
	if err != nil {
		return nil, err
	}
	port, err := strconv.Atoi(portString)
	if err != nil {
		return nil, err
	}

	portRange, err := knet.ParsePortRange(options.KubernetesMasterConfig.ServicesNodePortRange)
	if err != nil {
		return nil, err
	}

	podEvictionTimeout, err := time.ParseDuration(options.KubernetesMasterConfig.PodEvictionTimeout)
	if err != nil {
		return nil, fmt.Errorf("unable to parse PodEvictionTimeout: %v", err)
	}

	// Defaults are tested in TestAPIServerDefaults
	server := apiserveroptions.NewAPIServer()
	// Adjust defaults
	server.EventTTL = 2 * time.Hour
	server.ServiceClusterIPRange = net.IPNet(flagtypes.DefaultIPNet(options.KubernetesMasterConfig.ServicesSubnet))
	server.ServiceNodePortRange = *portRange
	server.AdmissionControl = strings.Join(AdmissionPlugins, ",")
	server.EnableLogsSupport = false // don't expose server logs
	server.EnableProfiling = false
	server.APIPrefix = KubeAPIPrefix
	server.APIGroupPrefix = KubeAPIGroupPrefix
	server.SecurePort = port
	server.MasterCount = options.KubernetesMasterConfig.MasterCount

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.APIServerArguments, server.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	if len(options.KubernetesMasterConfig.AdmissionConfig.PluginOrderOverride) > 0 {
		server.AdmissionControl = strings.Join(options.KubernetesMasterConfig.AdmissionConfig.PluginOrderOverride, ",")
	}

	// Defaults are tested in TestCMServerDefaults
	cmserver := cmapp.NewCMServer()
	// Adjust defaults
	cmserver.Address = "" // no healthz endpoint
	cmserver.Port = 0     // no healthz endpoint
	cmserver.PodEvictionTimeout = unversioned.Duration{Duration: podEvictionTimeout}
	cmserver.VolumeConfiguration.EnableDynamicProvisioning = options.VolumeConfig.DynamicProvisioningEnabled

	// resolve extended arguments
	// TODO: this should be done in config validation (along with the above) so we can provide
	// proper errors
	if err := cmdflags.Resolve(options.KubernetesMasterConfig.ControllerArguments, cmserver.AddFlags); len(err) > 0 {
		return nil, kerrors.NewAggregate(err)
	}

	cloud, err := cloudprovider.InitCloudProvider(cmserver.CloudProvider, cmserver.CloudConfigFile)
	if err != nil {
		return nil, err
	}
	if cloud != nil {
		glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", server.CloudProvider, server.CloudConfigFile)
	}

	plugins := []admission.Interface{}
	for _, pluginName := range strings.Split(server.AdmissionControl, ",") {
		switch pluginName {
		case lifecycle.PluginName:
			// We need to include our infrastructure and shared resource namespaces in the immortal namespaces list
			immortalNamespaces := sets.NewString(kapi.NamespaceDefault)
			if len(options.PolicyConfig.OpenShiftSharedResourcesNamespace) > 0 {
				immortalNamespaces.Insert(options.PolicyConfig.OpenShiftSharedResourcesNamespace)
			}
			if len(options.PolicyConfig.OpenShiftInfrastructureNamespace) > 0 {
				immortalNamespaces.Insert(options.PolicyConfig.OpenShiftInfrastructureNamespace)
			}
			plugins = append(plugins, lifecycle.NewLifecycle(clientadapter.FromUnversionedClient(kubeClient), immortalNamespaces))

		case serviceadmit.ExternalIPPluginName:
			// this needs to be moved upstream to be part of core config
			reject, admit, err := serviceadmit.ParseCIDRRules(options.NetworkConfig.ExternalIPNetworkCIDRs)
			if err != nil {
				// should have been caught with validation
//.........这里部分代码省略.........

// Run runs the specified APIServer.  This should never exit.
func Run(s *options.APIServer) error {
	genericvalidation.VerifyEtcdServersList(s.ServerRunOptions)
	genericapiserver.DefaultAndValidateRunOptions(s.ServerRunOptions)
	genericConfig := genericapiserver.NewConfig(). // create the new config
							ApplyOptions(s.ServerRunOptions). // apply the options selected
							Complete()                        // set default values based on the known values

	if err := genericConfig.MaybeGenerateServingCerts(); err != nil {
		glog.Fatalf("Failed to generate service certificate: %v", err)
	}

	capabilities.Initialize(capabilities.Capabilities{
		AllowPrivileged: s.AllowPrivileged,
		// TODO(vmarmol): Implement support for HostNetworkSources.
		PrivilegedSources: capabilities.PrivilegedSources{
			HostNetworkSources: []string{},
			HostPIDSources:     []string{},
			HostIPCSources:     []string{},
		},
		PerConnectionBandwidthLimitBytesPerSec: s.MaxConnectionBytesPerSec,
	})

	// Setup tunneler if needed
	var tunneler genericapiserver.Tunneler
	var proxyDialerFn apiserver.ProxyDialerFunc
	if len(s.SSHUser) > 0 {
		// Get ssh key distribution func, if supported
		var installSSH genericapiserver.InstallSSHKey
		cloud, err := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
		if err != nil {
			glog.Fatalf("Cloud provider could not be initialized: %v", err)
		}
		if cloud != nil {
			if instances, supported := cloud.Instances(); supported {
				installSSH = instances.AddSSHKeyToAllInstances
			}
		}
		if s.KubeletConfig.Port == 0 {
			glog.Fatalf("Must enable kubelet port if proxy ssh-tunneling is specified.")
		}
		// Set up the tunneler
		// TODO(cjcullen): If we want this to handle per-kubelet ports or other
		// kubelet listen-addresses, we need to plumb through options.
		healthCheckPath := &url.URL{
			Scheme: "https",
			Host:   net.JoinHostPort("127.0.0.1", strconv.FormatUint(uint64(s.KubeletConfig.Port), 10)),
			Path:   "healthz",
		}
		tunneler = genericapiserver.NewSSHTunneler(s.SSHUser, s.SSHKeyfile, healthCheckPath, installSSH)

		// Use the tunneler's dialer to connect to the kubelet
		s.KubeletConfig.Dial = tunneler.Dial
		// Use the tunneler's dialer when proxying to pods, services, and nodes
		proxyDialerFn = tunneler.Dial
	}

	// Proxying to pods and services is IP-based... don't expect to be able to verify the hostname
	proxyTLSClientConfig := &tls.Config{InsecureSkipVerify: true}

	kubeletClient, err := kubeletclient.NewStaticKubeletClient(&s.KubeletConfig)
	if err != nil {
		glog.Fatalf("Failed to start kubelet client: %v", err)
	}

	if s.StorageConfig.DeserializationCacheSize == 0 {
		// When size of cache is not explicitly set, estimate its size based on
		// target memory usage.
		glog.V(2).Infof("Initalizing deserialization cache size based on %dMB limit", s.TargetRAMMB)

		// This is the heuristics that from memory capacity is trying to infer
		// the maximum number of nodes in the cluster and set cache sizes based
		// on that value.
		// From our documentation, we officially recomment 120GB machines for
		// 2000 nodes, and we scale from that point. Thus we assume ~60MB of
		// capacity per node.
		// TODO: We may consider deciding that some percentage of memory will
		// be used for the deserialization cache and divide it by the max object
		// size to compute its size. We may even go further and measure
		// collective sizes of the objects in the cache.
		clusterSize := s.TargetRAMMB / 60
		s.StorageConfig.DeserializationCacheSize = 25 * clusterSize
		if s.StorageConfig.DeserializationCacheSize < 1000 {
			s.StorageConfig.DeserializationCacheSize = 1000
		}
	}

	storageGroupsToEncodingVersion, err := s.StorageGroupsToEncodingVersion()
	if err != nil {
		glog.Fatalf("error generating storage version map: %s", err)
	}
	storageFactory, err := genericapiserver.BuildDefaultStorageFactory(
		s.StorageConfig, s.DefaultStorageMediaType, api.Codecs,
		genericapiserver.NewDefaultResourceEncodingConfig(), storageGroupsToEncodingVersion,
		// FIXME: this GroupVersionResource override should be configurable
		[]unversioned.GroupVersionResource{batch.Resource("scheduledjobs").WithVersion("v2alpha1")},
		master.DefaultAPIResourceConfigSource(), s.RuntimeConfig)
	if err != nil {
		glog.Fatalf("error in initializing storage factory: %s", err)
	}
//.........这里部分代码省略.........