Golang controller.NewMatchingCache函数代码示例

// newReplicationManager configures a replication manager with the specified event recorder
func newReplicationManager(eventRecorder record.EventRecorder, podInformer cache.SharedIndexInformer, kubeClient clientset.Interface, resyncPeriod controller.ResyncPeriodFunc, burstReplicas int, lookupCacheSize int, garbageCollectorEnabled bool) *ReplicationManager {
	if kubeClient != nil && kubeClient.Core().RESTClient().GetRateLimiter() != nil {
		metrics.RegisterMetricAndTrackRateLimiterUsage("replication_controller", kubeClient.Core().RESTClient().GetRateLimiter())
	}

	rm := &ReplicationManager{
		kubeClient: kubeClient,
		podControl: controller.RealPodControl{
			KubeClient: kubeClient,
			Recorder:   eventRecorder,
		},
		burstReplicas: burstReplicas,
		expectations:  controller.NewUIDTrackingControllerExpectations(controller.NewControllerExpectations()),
		queue:         workqueue.NewNamedRateLimitingQueue(workqueue.DefaultControllerRateLimiter(), "replicationmanager"),
		garbageCollectorEnabled: garbageCollectorEnabled,
	}

	rm.rcStore.Indexer, rm.rcController = cache.NewIndexerInformer(
		&cache.ListWatch{
			ListFunc: func(options api.ListOptions) (runtime.Object, error) {
				return rm.kubeClient.Core().ReplicationControllers(api.NamespaceAll).List(options)
			},
			WatchFunc: func(options api.ListOptions) (watch.Interface, error) {
				return rm.kubeClient.Core().ReplicationControllers(api.NamespaceAll).Watch(options)
			},
		},
		&api.ReplicationController{},
		// TODO: Can we have much longer period here?
		FullControllerResyncPeriod,
		cache.ResourceEventHandlerFuncs{
			AddFunc:    rm.enqueueController,
			UpdateFunc: rm.updateRC,
			// This will enter the sync loop and no-op, because the controller has been deleted from the store.
			// Note that deleting a controller immediately after scaling it to 0 will not work. The recommended
			// way of achieving this is by performing a `stop` operation on the controller.
			DeleteFunc: rm.enqueueController,
		},
		cache.Indexers{cache.NamespaceIndex: cache.MetaNamespaceIndexFunc},
	)

	podInformer.AddEventHandler(cache.ResourceEventHandlerFuncs{
		AddFunc: rm.addPod,
		// This invokes the rc for every pod change, eg: host assignment. Though this might seem like overkill
		// the most frequent pod update is status, and the associated rc will only list from local storage, so
		// it should be ok.
		UpdateFunc: rm.updatePod,
		DeleteFunc: rm.deletePod,
	})
	rm.podStore.Indexer = podInformer.GetIndexer()
	rm.podController = podInformer.GetController()

	rm.syncHandler = rm.syncReplicationController
	rm.podStoreSynced = rm.podController.HasSynced
	rm.lookupCache = controller.NewMatchingCache(lookupCacheSize)
	return rm
}

// newReplicaSetController configures a replica set controller with the specified event recorder
func newReplicaSetController(eventRecorder record.EventRecorder, podInformer framework.SharedIndexInformer, kubeClient clientset.Interface, resyncPeriod controller.ResyncPeriodFunc, burstReplicas int, lookupCacheSize int, garbageCollectorEnabled bool) *ReplicaSetController {
	if kubeClient != nil && kubeClient.Core().GetRESTClient().GetRateLimiter() != nil {
		metrics.RegisterMetricAndTrackRateLimiterUsage("replicaset_controller", kubeClient.Core().GetRESTClient().GetRateLimiter())
	}

	rsc := &ReplicaSetController{
		kubeClient: kubeClient,
		podControl: controller.RealPodControl{
			KubeClient: kubeClient,
			Recorder:   eventRecorder,
		},
		burstReplicas: burstReplicas,
		expectations:  controller.NewUIDTrackingControllerExpectations(controller.NewControllerExpectations()),
		queue:         workqueue.New(),
		garbageCollectorEnabled: garbageCollectorEnabled,
	}

	rsc.rsStore.Store, rsc.rsController = framework.NewInformer(
		&cache.ListWatch{
			ListFunc: func(options api.ListOptions) (runtime.Object, error) {
				return rsc.kubeClient.Extensions().ReplicaSets(api.NamespaceAll).List(options)
			},
			WatchFunc: func(options api.ListOptions) (watch.Interface, error) {
				return rsc.kubeClient.Extensions().ReplicaSets(api.NamespaceAll).Watch(options)
			},
		},
		&extensions.ReplicaSet{},
		// TODO: Can we have much longer period here?
		FullControllerResyncPeriod,
		framework.ResourceEventHandlerFuncs{
			AddFunc:    rsc.enqueueReplicaSet,
			UpdateFunc: rsc.updateRS,
			// This will enter the sync loop and no-op, because the replica set has been deleted from the store.
			// Note that deleting a replica set immediately after scaling it to 0 will not work. The recommended
			// way of achieving this is by performing a `stop` operation on the replica set.
			DeleteFunc: rsc.enqueueReplicaSet,
		},
	)

	podInformer.AddEventHandler(framework.ResourceEventHandlerFuncs{
		AddFunc: rsc.addPod,
		// This invokes the ReplicaSet for every pod change, eg: host assignment. Though this might seem like
		// overkill the most frequent pod update is status, and the associated ReplicaSet will only list from
		// local storage, so it should be ok.
		UpdateFunc: rsc.updatePod,
		DeleteFunc: rsc.deletePod,
	})
	rsc.podStore.Indexer = podInformer.GetIndexer()
	rsc.podController = podInformer.GetController()

	rsc.syncHandler = rsc.syncReplicaSet
	rsc.podStoreSynced = rsc.podController.HasSynced
	rsc.lookupCache = controller.NewMatchingCache(lookupCacheSize)
	return rsc
}

// NewReplicationManager configures a replication manager with the specified event recorder
func NewReplicationManager(podInformer, rcInformer cache.SharedIndexInformer, kubeClient clientset.Interface, burstReplicas int, lookupCacheSize int, garbageCollectorEnabled bool) *ReplicationManager {
	if kubeClient != nil && kubeClient.Core().RESTClient().GetRateLimiter() != nil {
		metrics.RegisterMetricAndTrackRateLimiterUsage("replication_controller", kubeClient.Core().RESTClient().GetRateLimiter())
	}

	eventBroadcaster := record.NewBroadcaster()
	eventBroadcaster.StartLogging(glog.Infof)
	eventBroadcaster.StartRecordingToSink(&v1core.EventSinkImpl{Interface: kubeClient.Core().Events("")})

	rm := &ReplicationManager{
		kubeClient: kubeClient,
		podControl: controller.RealPodControl{
			KubeClient: kubeClient,
			Recorder:   eventBroadcaster.NewRecorder(v1.EventSource{Component: "replication-controller"}),
		},
		burstReplicas: burstReplicas,
		expectations:  controller.NewUIDTrackingControllerExpectations(controller.NewControllerExpectations()),
		queue:         workqueue.NewNamedRateLimitingQueue(workqueue.DefaultControllerRateLimiter(), "replicationmanager"),
		garbageCollectorEnabled: garbageCollectorEnabled,
	}

	rcInformer.AddEventHandler(cache.ResourceEventHandlerFuncs{
		AddFunc:    rm.enqueueController,
		UpdateFunc: rm.updateRC,
		// This will enter the sync loop and no-op, because the controller has been deleted from the store.
		// Note that deleting a controller immediately after scaling it to 0 will not work. The recommended
		// way of achieving this is by performing a `stop` operation on the controller.
		DeleteFunc: rm.enqueueController,
	})
	podInformer.AddEventHandler(cache.ResourceEventHandlerFuncs{
		AddFunc: rm.addPod,
		// This invokes the rc for every pod change, eg: host assignment. Though this might seem like overkill
		// the most frequent pod update is status, and the associated rc will only list from local storage, so
		// it should be ok.
		UpdateFunc: rm.updatePod,
		DeleteFunc: rm.deletePod,
	})

	rm.syncHandler = rm.syncReplicationController
	rm.rcLister.Indexer = rcInformer.GetIndexer()
	rm.podLister.Indexer = podInformer.GetIndexer()
	rm.podListerSynced = podInformer.HasSynced
	rm.lookupCache = controller.NewMatchingCache(lookupCacheSize)
	return rm
}

func NewDaemonSetsController(podInformer framework.SharedIndexInformer, kubeClient clientset.Interface, resyncPeriod controller.ResyncPeriodFunc, lookupCacheSize int) *DaemonSetsController {
	eventBroadcaster := record.NewBroadcaster()
	eventBroadcaster.StartLogging(glog.Infof)
	// TODO: remove the wrapper when every clients have moved to use the clientset.
	eventBroadcaster.StartRecordingToSink(&unversionedcore.EventSinkImpl{Interface: kubeClient.Core().Events("")})

	if kubeClient != nil && kubeClient.Core().GetRESTClient().GetRateLimiter() != nil {
		metrics.RegisterMetricAndTrackRateLimiterUsage("daemon_controller", kubeClient.Core().GetRESTClient().GetRateLimiter())
	}
	dsc := &DaemonSetsController{
		kubeClient:    kubeClient,
		eventRecorder: eventBroadcaster.NewRecorder(api.EventSource{Component: "daemonset-controller"}),
		podControl: controller.RealPodControl{
			KubeClient: kubeClient,
			Recorder:   eventBroadcaster.NewRecorder(api.EventSource{Component: "daemon-set"}),
		},
		burstReplicas: BurstReplicas,
		expectations:  controller.NewControllerExpectations(),
		queue:         workqueue.New(),
	}
	// Manage addition/update of daemon sets.
	dsc.dsStore.Store, dsc.dsController = framework.NewInformer(
		&cache.ListWatch{
			ListFunc: func(options api.ListOptions) (runtime.Object, error) {
				return dsc.kubeClient.Extensions().DaemonSets(api.NamespaceAll).List(options)
			},
			WatchFunc: func(options api.ListOptions) (watch.Interface, error) {
				return dsc.kubeClient.Extensions().DaemonSets(api.NamespaceAll).Watch(options)
			},
		},
		&extensions.DaemonSet{},
		// TODO: Can we have much longer period here?
		FullDaemonSetResyncPeriod,
		framework.ResourceEventHandlerFuncs{
			AddFunc: func(obj interface{}) {
				ds := obj.(*extensions.DaemonSet)
				glog.V(4).Infof("Adding daemon set %s", ds.Name)
				dsc.enqueueDaemonSet(ds)
			},
			UpdateFunc: func(old, cur interface{}) {
				oldDS := old.(*extensions.DaemonSet)
				curDS := cur.(*extensions.DaemonSet)
				// We should invalidate the whole lookup cache if a DS's selector has been updated.
				//
				// Imagine that you have two RSs:
				// * old DS1
				// * new DS2
				// You also have a pod that is attached to DS2 (because it doesn't match DS1 selector).
				// Now imagine that you are changing DS1 selector so that it is now matching that pod,
				// in such case we must invalidate the whole cache so that pod could be adopted by DS1
				//
				// This makes the lookup cache less helpful, but selector update does not happen often,
				// so it's not a big problem
				if !reflect.DeepEqual(oldDS.Spec.Selector, curDS.Spec.Selector) {
					dsc.lookupCache.InvalidateAll()
				}

				glog.V(4).Infof("Updating daemon set %s", oldDS.Name)
				dsc.enqueueDaemonSet(curDS)
			},
			DeleteFunc: dsc.deleteDaemonset,
		},
	)

	// Watch for creation/deletion of pods. The reason we watch is that we don't want a daemon set to create/delete
	// more pods until all the effects (expectations) of a daemon set's create/delete have been observed.
	podInformer.AddEventHandler(framework.ResourceEventHandlerFuncs{
		AddFunc:    dsc.addPod,
		UpdateFunc: dsc.updatePod,
		DeleteFunc: dsc.deletePod,
	})
	dsc.podStore.Indexer = podInformer.GetIndexer()
	dsc.podController = podInformer.GetController()
	dsc.podStoreSynced = podInformer.HasSynced

	// Watch for new nodes or updates to nodes - daemon pods are launched on new nodes, and possibly when labels on nodes change,
	dsc.nodeStore.Store, dsc.nodeController = framework.NewInformer(
		&cache.ListWatch{
			ListFunc: func(options api.ListOptions) (runtime.Object, error) {
				return dsc.kubeClient.Core().Nodes().List(options)
			},
			WatchFunc: func(options api.ListOptions) (watch.Interface, error) {
				return dsc.kubeClient.Core().Nodes().Watch(options)
			},
		},
		&api.Node{},
		resyncPeriod(),
		framework.ResourceEventHandlerFuncs{
			AddFunc:    dsc.addNode,
			UpdateFunc: dsc.updateNode,
		},
	)
	dsc.syncHandler = dsc.syncDaemonSet
	dsc.lookupCache = controller.NewMatchingCache(lookupCacheSize)
	return dsc
}

//.........这里部分代码省略.........

	if kubeClient != nil && kubeClient.Core().GetRESTClient().GetRateLimiter() != nil {
		metrics.RegisterMetricAndTrackRateLimiterUsage("replicaset_controller", kubeClient.Core().GetRESTClient().GetRateLimiter())
	}

	rsc := &ReplicaSetController{
		kubeClient: kubeClient,
		podControl: controller.RealPodControl{
			KubeClient: kubeClient,
			Recorder:   eventBroadcaster.NewRecorder(api.EventSource{Component: "replicaset-controller"}),
		},
		burstReplicas: burstReplicas,
		expectations:  controller.NewUIDTrackingControllerExpectations(controller.NewControllerExpectations()),
		queue:         workqueue.New(),
	}

	rsc.rsStore.Store, rsc.rsController = framework.NewInformer(
		&cache.ListWatch{
			ListFunc: func(options api.ListOptions) (runtime.Object, error) {
				return rsc.kubeClient.Extensions().ReplicaSets(api.NamespaceAll).List(options)
			},
			WatchFunc: func(options api.ListOptions) (watch.Interface, error) {
				return rsc.kubeClient.Extensions().ReplicaSets(api.NamespaceAll).Watch(options)
			},
		},
		&extensions.ReplicaSet{},
		// TODO: Can we have much longer period here?
		FullControllerResyncPeriod,
		framework.ResourceEventHandlerFuncs{
			AddFunc: rsc.enqueueReplicaSet,
			UpdateFunc: func(old, cur interface{}) {
				oldRS := old.(*extensions.ReplicaSet)
				curRS := cur.(*extensions.ReplicaSet)

				// We should invalidate the whole lookup cache if a RS's selector has been updated.
				//
				// Imagine that you have two RSs:
				// * old RS1
				// * new RS2
				// You also have a pod that is attached to RS2 (because it doesn't match RS1 selector).
				// Now imagine that you are changing RS1 selector so that it is now matching that pod,
				// in such case we must invalidate the whole cache so that pod could be adopted by RS1
				//
				// This makes the lookup cache less helpful, but selector update does not happen often,
				// so it's not a big problem
				if !reflect.DeepEqual(oldRS.Spec.Selector, curRS.Spec.Selector) {
					rsc.lookupCache.InvalidateAll()
				}

				// You might imagine that we only really need to enqueue the
				// replica set when Spec changes, but it is safer to sync any
				// time this function is triggered. That way a full informer
				// resync can requeue any replica set that don't yet have pods
				// but whose last attempts at creating a pod have failed (since
				// we don't block on creation of pods) instead of those
				// replica sets stalling indefinitely. Enqueueing every time
				// does result in some spurious syncs (like when Status.Replica
				// is updated and the watch notification from it retriggers
				// this function), but in general extra resyncs shouldn't be
				// that bad as ReplicaSets that haven't met expectations yet won't
				// sync, and all the listing is done using local stores.
				if oldRS.Status.Replicas != curRS.Status.Replicas {
					glog.V(4).Infof("Observed updated replica count for ReplicaSet: %v, %d->%d", curRS.Name, oldRS.Status.Replicas, curRS.Status.Replicas)
				}
				rsc.enqueueReplicaSet(cur)
			},
			// This will enter the sync loop and no-op, because the replica set has been deleted from the store.
			// Note that deleting a replica set immediately after scaling it to 0 will not work. The recommended
			// way of achieving this is by performing a `stop` operation on the replica set.
			DeleteFunc: rsc.enqueueReplicaSet,
		},
	)

	rsc.podStore.Indexer, rsc.podController = framework.NewIndexerInformer(
		&cache.ListWatch{
			ListFunc: func(options api.ListOptions) (runtime.Object, error) {
				return rsc.kubeClient.Core().Pods(api.NamespaceAll).List(options)
			},
			WatchFunc: func(options api.ListOptions) (watch.Interface, error) {
				return rsc.kubeClient.Core().Pods(api.NamespaceAll).Watch(options)
			},
		},
		&api.Pod{},
		resyncPeriod(),
		framework.ResourceEventHandlerFuncs{
			AddFunc: rsc.addPod,
			// This invokes the ReplicaSet for every pod change, eg: host assignment. Though this might seem like
			// overkill the most frequent pod update is status, and the associated ReplicaSet will only list from
			// local storage, so it should be ok.
			UpdateFunc: rsc.updatePod,
			DeleteFunc: rsc.deletePod,
		},
		cache.Indexers{cache.NamespaceIndex: cache.MetaNamespaceIndexFunc},
	)

	rsc.syncHandler = rsc.syncReplicaSet
	rsc.podStoreSynced = rsc.podController.HasSynced
	rsc.lookupCache = controller.NewMatchingCache(lookupCacheSize)
	return rsc
}

// newReplicationManagerInternal configures a replication manager with the specified event recorder
func newReplicationManagerInternal(eventRecorder record.EventRecorder, podInformer framework.SharedIndexInformer, kubeClient clientset.Interface, resyncPeriod controller.ResyncPeriodFunc, burstReplicas int, lookupCacheSize int) *ReplicationManager {
	if kubeClient != nil && kubeClient.Core().GetRESTClient().GetRateLimiter() != nil {
		metrics.RegisterMetricAndTrackRateLimiterUsage("replication_controller", kubeClient.Core().GetRESTClient().GetRateLimiter())
	}

	rm := &ReplicationManager{
		kubeClient: kubeClient,
		podControl: controller.RealPodControl{
			KubeClient: kubeClient,
			Recorder:   eventRecorder,
		},
		burstReplicas: burstReplicas,
		expectations:  controller.NewUIDTrackingControllerExpectations(controller.NewControllerExpectations()),
		queue:         workqueue.New(),
	}

	rm.rcStore.Indexer, rm.rcController = framework.NewIndexerInformer(
		&cache.ListWatch{
			ListFunc: func(options api.ListOptions) (runtime.Object, error) {
				return rm.kubeClient.Core().ReplicationControllers(api.NamespaceAll).List(options)
			},
			WatchFunc: func(options api.ListOptions) (watch.Interface, error) {
				return rm.kubeClient.Core().ReplicationControllers(api.NamespaceAll).Watch(options)
			},
		},
		&api.ReplicationController{},
		// TODO: Can we have much longer period here?
		FullControllerResyncPeriod,
		framework.ResourceEventHandlerFuncs{
			AddFunc: rm.enqueueController,
			UpdateFunc: func(old, cur interface{}) {
				oldRC := old.(*api.ReplicationController)
				curRC := cur.(*api.ReplicationController)

				// We should invalidate the whole lookup cache if a RC's selector has been updated.
				//
				// Imagine that you have two RCs:
				// * old RC1
				// * new RC2
				// You also have a pod that is attached to RC2 (because it doesn't match RC1 selector).
				// Now imagine that you are changing RC1 selector so that it is now matching that pod,
				// in such case, we must invalidate the whole cache so that pod could be adopted by RC1
				//
				// This makes the lookup cache less helpful, but selector update does not happen often,
				// so it's not a big problem
				if !reflect.DeepEqual(oldRC.Spec.Selector, curRC.Spec.Selector) {
					rm.lookupCache.InvalidateAll()
				}

				// You might imagine that we only really need to enqueue the
				// controller when Spec changes, but it is safer to sync any
				// time this function is triggered. That way a full informer
				// resync can requeue any controllers that don't yet have pods
				// but whose last attempts at creating a pod have failed (since
				// we don't block on creation of pods) instead of those
				// controllers stalling indefinitely. Enqueueing every time
				// does result in some spurious syncs (like when Status.Replica
				// is updated and the watch notification from it retriggers
				// this function), but in general extra resyncs shouldn't be
				// that bad as rcs that haven't met expectations yet won't
				// sync, and all the listing is done using local stores.
				if oldRC.Status.Replicas != curRC.Status.Replicas {
					glog.V(4).Infof("Observed updated replica count for rc: %v, %d->%d", curRC.Name, oldRC.Status.Replicas, curRC.Status.Replicas)
				}
				rm.enqueueController(cur)
			},
			// This will enter the sync loop and no-op, because the controller has been deleted from the store.
			// Note that deleting a controller immediately after scaling it to 0 will not work. The recommended
			// way of achieving this is by performing a `stop` operation on the controller.
			DeleteFunc: rm.enqueueController,
		},
		cache.Indexers{cache.NamespaceIndex: cache.MetaNamespaceIndexFunc},
	)

	podInformer.AddEventHandler(framework.ResourceEventHandlerFuncs{
		AddFunc: rm.addPod,
		// This invokes the rc for every pod change, eg: host assignment. Though this might seem like overkill
		// the most frequent pod update is status, and the associated rc will only list from local storage, so
		// it should be ok.
		UpdateFunc: rm.updatePod,
		DeleteFunc: rm.deletePod,
	})
	rm.podStore.Indexer = podInformer.GetIndexer()
	rm.podController = podInformer.GetController()

	rm.syncHandler = rm.syncReplicationController
	rm.podStoreSynced = rm.podController.HasSynced
	rm.lookupCache = controller.NewMatchingCache(lookupCacheSize)
	return rm
}

func NewDaemonSetsController(daemonSetInformer informers.DaemonSetInformer, podInformer informers.PodInformer, nodeInformer informers.NodeInformer, kubeClient clientset.Interface, lookupCacheSize int) *DaemonSetsController {
	eventBroadcaster := record.NewBroadcaster()
	eventBroadcaster.StartLogging(glog.Infof)
	// TODO: remove the wrapper when every clients have moved to use the clientset.
	eventBroadcaster.StartRecordingToSink(&v1core.EventSinkImpl{Interface: kubeClient.Core().Events("")})

	if kubeClient != nil && kubeClient.Core().RESTClient().GetRateLimiter() != nil {
		metrics.RegisterMetricAndTrackRateLimiterUsage("daemon_controller", kubeClient.Core().RESTClient().GetRateLimiter())
	}
	dsc := &DaemonSetsController{
		kubeClient:    kubeClient,
		eventRecorder: eventBroadcaster.NewRecorder(v1.EventSource{Component: "daemonset-controller"}),
		podControl: controller.RealPodControl{
			KubeClient: kubeClient,
			Recorder:   eventBroadcaster.NewRecorder(v1.EventSource{Component: "daemon-set"}),
		},
		burstReplicas: BurstReplicas,
		expectations:  controller.NewControllerExpectations(),
		queue:         workqueue.NewNamedRateLimitingQueue(workqueue.DefaultControllerRateLimiter(), "daemonset"),
	}

	daemonSetInformer.Informer().AddEventHandler(cache.ResourceEventHandlerFuncs{
		AddFunc: func(obj interface{}) {
			ds := obj.(*extensions.DaemonSet)
			glog.V(4).Infof("Adding daemon set %s", ds.Name)
			dsc.enqueueDaemonSet(ds)
		},
		UpdateFunc: func(old, cur interface{}) {
			oldDS := old.(*extensions.DaemonSet)
			curDS := cur.(*extensions.DaemonSet)
			// We should invalidate the whole lookup cache if a DS's selector has been updated.
			//
			// Imagine that you have two RSs:
			// * old DS1
			// * new DS2
			// You also have a pod that is attached to DS2 (because it doesn't match DS1 selector).
			// Now imagine that you are changing DS1 selector so that it is now matching that pod,
			// in such case we must invalidate the whole cache so that pod could be adopted by DS1
			//
			// This makes the lookup cache less helpful, but selector update does not happen often,
			// so it's not a big problem
			if !reflect.DeepEqual(oldDS.Spec.Selector, curDS.Spec.Selector) {
				dsc.lookupCache.InvalidateAll()
			}

			glog.V(4).Infof("Updating daemon set %s", oldDS.Name)
			dsc.enqueueDaemonSet(curDS)
		},
		DeleteFunc: dsc.deleteDaemonset,
	})
	dsc.dsStore = daemonSetInformer.Lister()
	dsc.dsStoreSynced = daemonSetInformer.Informer().HasSynced

	// Watch for creation/deletion of pods. The reason we watch is that we don't want a daemon set to create/delete
	// more pods until all the effects (expectations) of a daemon set's create/delete have been observed.
	podInformer.Informer().AddEventHandler(cache.ResourceEventHandlerFuncs{
		AddFunc:    dsc.addPod,
		UpdateFunc: dsc.updatePod,
		DeleteFunc: dsc.deletePod,
	})
	dsc.podStore = podInformer.Lister()
	dsc.podStoreSynced = podInformer.Informer().HasSynced

	nodeInformer.Informer().AddEventHandler(cache.ResourceEventHandlerFuncs{
		AddFunc:    dsc.addNode,
		UpdateFunc: dsc.updateNode,
	},
	)
	dsc.nodeStoreSynced = nodeInformer.Informer().HasSynced
	dsc.nodeStore = nodeInformer.Lister()

	dsc.syncHandler = dsc.syncDaemonSet
	dsc.lookupCache = controller.NewMatchingCache(lookupCacheSize)
	return dsc
}