Golang extensions.ReplicaSet类代码示例

// SetNewReplicaSetAnnotations sets new replica set's annotations appropriately by updating its revision and
// copying required deployment annotations to it; it returns true if replica set's annotation is changed.
func SetNewReplicaSetAnnotations(deployment *extensions.Deployment, newRS *extensions.ReplicaSet, newRevision string, exists bool) bool {
	// First, copy deployment's annotations (except for apply and revision annotations)
	annotationChanged := copyDeploymentAnnotationsToReplicaSet(deployment, newRS)
	// Then, update replica set's revision annotation
	if newRS.Annotations == nil {
		newRS.Annotations = make(map[string]string)
	}
	oldRevision, ok := newRS.Annotations[RevisionAnnotation]
	// The newRS's revision should be the greatest among all RSes. Usually, its revision number is newRevision (the max revision number
	// of all old RSes + 1). However, it's possible that some of the old RSes are deleted after the newRS revision being updated, and
	// newRevision becomes smaller than newRS's revision. We should only update newRS revision when it's smaller than newRevision.
	if oldRevision < newRevision {
		newRS.Annotations[RevisionAnnotation] = newRevision
		annotationChanged = true
		glog.V(4).Infof("Updating replica set %q revision to %s", newRS.Name, newRevision)
	}
	// If a revision annotation already existed and this replica set was updated with a new revision
	// then that means we are rolling back to this replica set. We need to preserve the old revisions
	// for historical information.
	if ok && annotationChanged {
		revisionHistoryAnnotation := newRS.Annotations[RevisionHistoryAnnotation]
		oldRevisions := strings.Split(revisionHistoryAnnotation, ",")
		if len(oldRevisions[0]) == 0 {
			newRS.Annotations[RevisionHistoryAnnotation] = oldRevision
		} else {
			oldRevisions = append(oldRevisions, oldRevision)
			newRS.Annotations[RevisionHistoryAnnotation] = strings.Join(oldRevisions, ",")
		}
	}
	// If the new replica set is about to be created, we need to add replica annotations to it.
	if !exists && SetReplicasAnnotations(newRS, deployment.Spec.Replicas, deployment.Spec.Replicas+MaxSurge(*deployment)) {
		annotationChanged = true
	}
	return annotationChanged
}

// updateReplicaCount attempts to update the Status.Replicas of the given ReplicaSet, with a single GET/PUT retry.
func updateReplicaCount(rsClient client.ReplicaSetInterface, rs extensions.ReplicaSet, numReplicas, numFullyLabeledReplicas int) (updateErr error) {
	// This is the steady state. It happens when the ReplicaSet doesn't have any expectations, since
	// we do a periodic relist every 30s. If the generations differ but the replicas are
	// the same, a caller might've resized to the same replica count.
	if int(rs.Status.Replicas) == numReplicas &&
		int(rs.Status.FullyLabeledReplicas) == numFullyLabeledReplicas &&
		rs.Generation == rs.Status.ObservedGeneration {
		return nil
	}
	// Save the generation number we acted on, otherwise we might wrongfully indicate
	// that we've seen a spec update when we retry.
	// TODO: This can clobber an update if we allow multiple agents to write to the
	// same status.
	generation := rs.Generation

	var getErr error
	for i, rs := 0, &rs; ; i++ {
		glog.V(4).Infof(fmt.Sprintf("Updating replica count for ReplicaSet: %s/%s, ", rs.Namespace, rs.Name) +
			fmt.Sprintf("replicas %d->%d (need %d), ", rs.Status.Replicas, numReplicas, rs.Spec.Replicas) +
			fmt.Sprintf("fullyLabeledReplicas %d->%d, ", rs.Status.FullyLabeledReplicas, numFullyLabeledReplicas) +
			fmt.Sprintf("sequence No: %v->%v", rs.Status.ObservedGeneration, generation))

		rs.Status = extensions.ReplicaSetStatus{Replicas: int32(numReplicas), FullyLabeledReplicas: int32(numFullyLabeledReplicas), ObservedGeneration: generation}
		_, updateErr = rsClient.UpdateStatus(rs)
		if updateErr == nil || i >= statusUpdateRetries {
			return updateErr
		}
		// Update the ReplicaSet with the latest resource version for the next poll
		if rs, getErr = rsClient.Get(rs.Name); getErr != nil {
			// If the GET fails we can't trust status.Replicas anymore. This error
			// is bound to be more interesting than the update failure.
			return getErr
		}
	}
}

func Convert_v1_ReplicationController_to_extensions_ReplicaSet(in *ReplicationController, out *extensions.ReplicaSet, s conversion.Scope) error {
	out.ObjectMeta = in.ObjectMeta
	if err := Convert_v1_ReplicationControllerSpec_to_extensions_ReplicaSetSpec(&in.Spec, &out.Spec, s); err != nil {
		return err
	}
	if err := Convert_v1_ReplicationControllerStatus_to_extensions_ReplicaSetStatus(&in.Status, &out.Status, s); err != nil {
		return err
	}
	return nil
}

func TestWatchControllers(t *testing.T) {
	fakeWatch := watch.NewFake()
	client := &fake.Clientset{}
	client.AddWatchReactor("*", core.DefaultWatchReactor(fakeWatch, nil))
	manager := NewReplicaSetControllerFromClient(client, controller.NoResyncPeriodFunc, BurstReplicas, 0)
	manager.podStoreSynced = alwaysReady

	var testRSSpec extensions.ReplicaSet
	received := make(chan string)

	// The update sent through the fakeWatcher should make its way into the workqueue,
	// and eventually into the syncHandler. The handler validates the received controller
	// and closes the received channel to indicate that the test can finish.
	manager.syncHandler = func(key string) error {

		obj, exists, err := manager.rsStore.Store.GetByKey(key)
		if !exists || err != nil {
			t.Errorf("Expected to find replica set under key %v", key)
		}
		rsSpec := *obj.(*extensions.ReplicaSet)
		if !api.Semantic.DeepDerivative(rsSpec, testRSSpec) {
			t.Errorf("Expected %#v, but got %#v", testRSSpec, rsSpec)
		}
		close(received)
		return nil
	}
	// Start only the ReplicaSet watcher and the workqueue, send a watch event,
	// and make sure it hits the sync method.
	stopCh := make(chan struct{})
	defer close(stopCh)
	go manager.rsController.Run(stopCh)
	go wait.Until(manager.worker, 10*time.Millisecond, stopCh)

	testRSSpec.Name = "foo"
	fakeWatch.Add(&testRSSpec)

	select {
	case <-received:
	case <-time.After(wait.ForeverTestTimeout):
		t.Errorf("unexpected timeout from result channel")
	}
}

// setNewReplicaSetAnnotations sets new replica set's annotations appropriately by updating its revision and
// copying required deployment annotations to it; it returns true if replica set's annotation is changed.
func setNewReplicaSetAnnotations(deployment *extensions.Deployment, rs *extensions.ReplicaSet, newRevision string) bool {
	// First, copy deployment's annotations
	annotationChanged := copyDeploymentAnnotationsToReplicaSet(deployment, rs)
	// Then, update replica set's revision annotation
	if rs.Annotations == nil {
		rs.Annotations = make(map[string]string)
	}
	if rs.Annotations[deploymentutil.RevisionAnnotation] != newRevision {
		rs.Annotations[deploymentutil.RevisionAnnotation] = newRevision
		annotationChanged = true
		glog.V(4).Infof("updating replica set %q's revision to %s - %+v\n", rs.Name, newRevision)
	}
	return annotationChanged
}

// updateReplicaSetStatus attempts to update the Status.Replicas of the given ReplicaSet, with a single GET/PUT retry.
func updateReplicaSetStatus(c unversionedextensions.ReplicaSetInterface, rs extensions.ReplicaSet, newStatus extensions.ReplicaSetStatus) (updateErr error) {
	// This is the steady state. It happens when the ReplicaSet doesn't have any expectations, since
	// we do a periodic relist every 30s. If the generations differ but the replicas are
	// the same, a caller might've resized to the same replica count.
	if rs.Status.Replicas == newStatus.Replicas &&
		rs.Status.FullyLabeledReplicas == newStatus.FullyLabeledReplicas &&
		rs.Status.ReadyReplicas == newStatus.ReadyReplicas &&
		rs.Status.AvailableReplicas == newStatus.AvailableReplicas &&
		rs.Generation == rs.Status.ObservedGeneration &&
		reflect.DeepEqual(rs.Status.Conditions, newStatus.Conditions) {
		return nil
	}

	// deep copy to avoid mutation now.
	// TODO this method need some work.  Retry on conflict probably, though I suspect this is stomping status to something it probably shouldn't
	copyObj, err := api.Scheme.DeepCopy(rs)
	if err != nil {
		return err
	}
	rs = copyObj.(extensions.ReplicaSet)

	// Save the generation number we acted on, otherwise we might wrongfully indicate
	// that we've seen a spec update when we retry.
	// TODO: This can clobber an update if we allow multiple agents to write to the
	// same status.
	newStatus.ObservedGeneration = rs.Generation

	var getErr error
	for i, rs := 0, &rs; ; i++ {
		glog.V(4).Infof(fmt.Sprintf("Updating replica count for ReplicaSet: %s/%s, ", rs.Namespace, rs.Name) +
			fmt.Sprintf("replicas %d->%d (need %d), ", rs.Status.Replicas, newStatus.Replicas, rs.Spec.Replicas) +
			fmt.Sprintf("fullyLabeledReplicas %d->%d, ", rs.Status.FullyLabeledReplicas, newStatus.FullyLabeledReplicas) +
			fmt.Sprintf("readyReplicas %d->%d, ", rs.Status.ReadyReplicas, newStatus.ReadyReplicas) +
			fmt.Sprintf("availableReplicas %d->%d, ", rs.Status.AvailableReplicas, newStatus.AvailableReplicas) +
			fmt.Sprintf("sequence No: %v->%v", rs.Status.ObservedGeneration, newStatus.ObservedGeneration))

		rs.Status = newStatus
		_, updateErr = c.UpdateStatus(rs)
		if updateErr == nil || i >= statusUpdateRetries {
			return updateErr
		}
		// Update the ReplicaSet with the latest resource version for the next poll
		if rs, getErr = c.Get(rs.Name); getErr != nil {
			// If the GET fails we can't trust status.Replicas anymore. This error
			// is bound to be more interesting than the update failure.
			return getErr
		}
	}
}

// SetReplicasAnnotations sets the desiredReplicas and maxReplicas into the annotations
func SetReplicasAnnotations(rs *extensions.ReplicaSet, desiredReplicas, maxReplicas int32) bool {
	updated := false
	if rs.Annotations == nil {
		rs.Annotations = make(map[string]string)
	}
	desiredString := fmt.Sprintf("%d", desiredReplicas)
	if hasString := rs.Annotations[DesiredReplicasAnnotation]; hasString != desiredString {
		rs.Annotations[DesiredReplicasAnnotation] = desiredString
		updated = true
	}
	maxString := fmt.Sprintf("%d", maxReplicas)
	if hasString := rs.Annotations[MaxReplicasAnnotation]; hasString != maxString {
		rs.Annotations[MaxReplicasAnnotation] = maxString
		updated = true
	}
	return updated
}

// copyDeploymentAnnotationsToReplicaSet copies deployment's annotations to replica set's annotations,
// and returns true if replica set's annotation is changed.
// Note that apply and revision annotations are not copied.
func copyDeploymentAnnotationsToReplicaSet(deployment *extensions.Deployment, rs *extensions.ReplicaSet) bool {
	rsAnnotationsChanged := false
	if rs.Annotations == nil {
		rs.Annotations = make(map[string]string)
	}
	for k, v := range deployment.Annotations {
		// newRS revision is updated automatically in getNewReplicaSet, and the deployment's revision number is then updated
		// by copying its newRS revision number. We should not copy deployment's revision to its newRS, since the update of
		// deployment revision number may fail (revision becomes stale) and the revision number in newRS is more reliable.
		if skipCopyAnnotation(k) || rs.Annotations[k] == v {
			continue
		}
		rs.Annotations[k] = v
		rsAnnotationsChanged = true
	}
	return rsAnnotationsChanged
}

// copyDeploymentAnnotationsToReplicaSet copies deployment's annotations to replica set's annotations,
// and returns true if replica set's annotation is changed
func copyDeploymentAnnotationsToReplicaSet(deployment *extensions.Deployment, rs *extensions.ReplicaSet) bool {
	rsAnnotationsChanged := false
	if rs.Annotations == nil {
		rs.Annotations = make(map[string]string)
	}
	for k, v := range deployment.Annotations {
		// Skip apply annotations
		// TODO: How to decide which annotations should / should not be copied?
		// See https://github.com/kubernetes/kubernetes/pull/20035#issuecomment-179558615
		if k == kubectl.LastAppliedConfigAnnotation || rs.Annotations[k] == v {
			continue
		}
		rs.Annotations[k] = v
		rsAnnotationsChanged = true
	}
	return rsAnnotationsChanged
}

// setNewReplicaSetAnnotations sets new replica set's annotations appropriately by updating its revision and
// copying required deployment annotations to it; it returns true if replica set's annotation is changed.
func setNewReplicaSetAnnotations(deployment *extensions.Deployment, newRS *extensions.ReplicaSet, newRevision string) bool {
	// First, copy deployment's annotations (except for apply and revision annotations)
	annotationChanged := copyDeploymentAnnotationsToReplicaSet(deployment, newRS)
	// Then, update replica set's revision annotation
	if newRS.Annotations == nil {
		newRS.Annotations = make(map[string]string)
	}
	// The newRS's revision should be the greatest among all RSes. Usually, its revision number is newRevision (the max revision number
	// of all old RSes + 1). However, it's possible that some of the old RSes are deleted after the newRS revision being updated, and
	// newRevision becomes smaller than newRS's revision. We should only update newRS revision when it's smaller than newRevision.
	if newRS.Annotations[deploymentutil.RevisionAnnotation] < newRevision {
		newRS.Annotations[deploymentutil.RevisionAnnotation] = newRevision
		annotationChanged = true
		glog.V(4).Infof("updating replica set %q's revision to %s - %+v\n", newRS.Name, newRevision, newRS)
	}
	return annotationChanged
}

// copyDeploymentAnnotationsToReplicaSet copies deployment's annotations to replica set's annotations,
// and returns true if replica set's annotation is changed.
// Note that apply and revision annotations are not copied.
func copyDeploymentAnnotationsToReplicaSet(deployment *extensions.Deployment, rs *extensions.ReplicaSet) bool {
	rsAnnotationsChanged := false
	if rs.Annotations == nil {
		rs.Annotations = make(map[string]string)
	}
	for k, v := range deployment.Annotations {
		// TODO: How to decide which annotations should / should not be copied?
		// See https://github.com/kubernetes/kubernetes/pull/20035#issuecomment-179558615
		// Skip apply annotations and revision annotations.
		// newRS revision is updated automatically in getNewReplicaSet, and the deployment's revision number is then updated
		// by copying its newRS revision number. We should not copy deployment's revision to its newRS, since the update of
		// deployment revision number may fail (revision becomes stale) and the revision number in newRS is more reliable.
		if k == kubectl.LastAppliedConfigAnnotation || k == deploymentutil.RevisionAnnotation || rs.Annotations[k] == v {
			continue
		}
		rs.Annotations[k] = v
		rsAnnotationsChanged = true
	}
	return rsAnnotationsChanged
}