当前位置: 首页>>代码示例>>Golang>>正文

Golang gopacket.NewPacket函数代码示例

本文整理汇总了Golang中gopacket.NewPacket函数的典型用法代码示例。如果您正苦于以下问题：Golang NewPacket函数的具体用法？Golang NewPacket怎么用？Golang NewPacket使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了NewPacket函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Golang代码示例。

示例1: TestPacketDot11CtrlAck

func TestPacketDot11CtrlAck(t *testing.T) {
	p := gopacket.NewPacket(testPacketDot11CtrlAck, LinkTypeIEEE80211Radio, gopacket.Default)
	if p.ErrorLayer() != nil {
		t.Error("Failed to decode packet:", p.ErrorLayer().Error())
	}
	checkLayers(p, []gopacket.LayerType{LayerTypeRadioTap, LayerTypeDot11}, t)

	if got, ok := p.Layer(LayerTypeDot11).(*Dot11); ok {
		if !got.ChecksumValid() {
			t.Errorf("Dot11 packet processing failed:\nchecksum failed. got  :\n%#v\n\n", got)
		}
	}

	if got, ok := p.Layer(LayerTypeDot11).(*Dot11); ok {
		want := &Dot11{
			BaseLayer: BaseLayer{
				Contents: []uint8{0xd4, 0x0, 0x0, 0x0, 0x0, 0x19, 0xe3, 0xd3, 0x53, 0x52},
				Payload:  []uint8{},
			},
			Type:       Dot11TypeCtrlAck,
			Proto:      0x0,
			Flags:      0x0,
			DurationID: 0x0,
			Address1:   net.HardwareAddr{0x0, 0x19, 0xe3, 0xd3, 0x53, 0x52},
			Address2:   net.HardwareAddr(nil),
			Address3:   net.HardwareAddr(nil),
			Address4:   net.HardwareAddr(nil),
			Checksum:   0x8776e946,
		}
		if !reflect.DeepEqual(got, want) {
			t.Errorf("Dot11 packet processing failed:\ngot  :\n%#v\n\nwant :\n%#v\n\n", got, want)
		}
	}
}
开发者ID:npe9，项目名称:minimega，代码行数:34，代码来源:dot11_test.go

示例2: TestPacketUSB0

func TestPacketUSB0(t *testing.T) {
	p := gopacket.NewPacket(testPacketUSB0, LinkTypeLinuxUSB, gopacket.Default)
	if p.ErrorLayer() != nil {
		t.Error("Failed to decode packet:", p.ErrorLayer().Error())
	}
	checkLayers(p, []gopacket.LayerType{LayerTypeUSB, LayerTypeUSBInterrupt}, t)

	if got, ok := p.Layer(LayerTypeUSB).(*USB); ok {
		want := &USB{
			BaseLayer: BaseLayer{
				Contents: []uint8{0x0, 0x38, 0x4a, 0x3b, 0x0, 0x88, 0xff, 0xff, 0x43, 0x1, 0x81, 0x1, 0x2, 0x0, 0x2d, 0x0, 0xc0, 0xd3, 0x5b, 0x50, 0x0, 0x0, 0x0, 0x0, 0x8a, 0x85, 0xa, 0x0, 0x0, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0},
				Payload:  []uint8{0x4},
			},
			ID:             0xffff88003b4a3800,
			EventType:      USBEventTypeComplete,
			TransferType:   USBTransportTypeInterrupt,
			Direction:      0x1,
			EndpointNumber: 0x1,
			DeviceAddress:  0x1,
			BusID:          0x2,
			TimestampSec:   1348195264,
			TimestampUsec:  689546,
			Setup:          false,
			Data:           true,
			Status:         0,
			UrbLength:      0x1,
			UrbDataLength:  0x1,
		}

		if !reflect.DeepEqual(got, want) {
			t.Errorf("USB packet processing failed:\ngot  :\n%#v\n\nwant :\n%#v\n\n", got, want)
		}
	}

}
开发者ID:npe9，项目名称:minimega，代码行数:35，代码来源:usb_test.go

示例3: TestPacketDot11DataIP

func TestPacketDot11DataIP(t *testing.T) {
	p := gopacket.NewPacket(testPacketDot11DataIP, LinkTypeIEEE80211Radio, gopacket.Default)
	if p.ErrorLayer() != nil {
		t.Error("Failed to decode packet:", p.ErrorLayer().Error())
	}
	checkLayers(p, []gopacket.LayerType{LayerTypeRadioTap, LayerTypeDot11, LayerTypeDot11Data, LayerTypeLLC, LayerTypeSNAP, LayerTypeIPv4, LayerTypeUDP, gopacket.LayerTypePayload}, t)
}
开发者ID:npe9，项目名称:minimega，代码行数:7，代码来源:dot11_test.go

示例4: TestPacketDot11DataARP

func TestPacketDot11DataARP(t *testing.T) {
	p := gopacket.NewPacket(testPacketDot11DataARP, LinkTypeIEEE80211Radio, gopacket.Default)
	if p.ErrorLayer() != nil {
		t.Error("Failed to decode packet:", p.ErrorLayer().Error())
	}
	checkLayers(p, []gopacket.LayerType{LayerTypeRadioTap, LayerTypeDot11, LayerTypeDot11Data, LayerTypeLLC, LayerTypeSNAP, LayerTypeARP}, t)

	if got, ok := p.Layer(LayerTypeARP).(*ARP); ok {
		want := &ARP{
			BaseLayer: BaseLayer{
				Contents: []uint8{0x0, 0x1, 0x8, 0x0, 0x6, 0x4, 0x0, 0x1, 0x0, 0x19, 0xe3, 0xd3, 0x53, 0x52, 0xa9, 0xfe, 0xf7, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x43, 0x8, 0xe, 0x36},
				Payload:  []uint8{},
			},
			AddrType:          0x1,
			Protocol:          0x800,
			HwAddressSize:     0x6,
			ProtAddressSize:   0x4,
			Operation:         0x1,
			SourceHwAddress:   []uint8{0x0, 0x19, 0xe3, 0xd3, 0x53, 0x52},
			SourceProtAddress: []uint8{0xa9, 0xfe, 0xf7, 0x0},
			DstHwAddress:      []uint8{0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
			DstProtAddress:    []uint8{0x43, 0x8, 0xe, 0x36},
		}

		if !reflect.DeepEqual(got, want) {
			t.Errorf("ARP packet processing failed:\ngot  :\n%#v\n\nwant :\n%#v\n\n", got, want)
		}
	}
}
开发者ID:npe9，项目名称:minimega，代码行数:29，代码来源:dot11_test.go

示例5: TestPacketIPSecESP

func TestPacketIPSecESP(t *testing.T) {
	p := gopacket.NewPacket(testPacketIPSecESP, LinkTypeEthernet, gopacket.Default)
	if p.ErrorLayer() != nil {
		t.Error("Failed to decode packet:", p.ErrorLayer().Error())
	}
	checkLayers(p, []gopacket.LayerType{LayerTypeEthernet, LayerTypeIPv4, LayerTypeIPSecESP}, t)
}
开发者ID:npe9，项目名称:minimega，代码行数:7，代码来源:ipsec_test.go

示例6: TestPacketP6196

func TestPacketP6196(t *testing.T) {
	p := gopacket.NewPacket(testPacketP6196, LinkTypeIEEE80211Radio, gopacket.Default)
	if p.ErrorLayer() != nil {
		t.Error("Failed to decode packet:", p.ErrorLayer().Error())
	}

	checkLayers(p, []gopacket.LayerType{LayerTypeRadioTap, LayerTypeDot11, LayerTypeDot11WEP}, t)
}
开发者ID:npe9，项目名称:minimega，代码行数:8，代码来源:dot11_test.go

示例7: TestPacketPrism

func TestPacketPrism(t *testing.T) {
	p := gopacket.NewPacket(testPacketPrism, LinkTypePrismHeader, gopacket.Default)
	if p.ErrorLayer() != nil {
		t.Error("Failed to decode packet:", p.ErrorLayer().Error())
	}
	checkLayers(p, []gopacket.LayerType{LayerTypePrismHeader, LayerTypeDot11, LayerTypeDot11MgmtProbeReq}, t)

	if got, ok := p.Layer(LayerTypePrismHeader).(*PrismHeader); ok {
		want := &PrismHeader{
			BaseLayer: BaseLayer{
				Contents: []uint8{0x44, 0x0, 0x0, 0x0, 0x90, 0x0, 0x0, 0x0, 0x72, 0x61, 0x30, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x44, 0x0, 0x1, 0x0, 0x0, 0x0, 0x4, 0x0, 0xf9, 0xc1, 0x29, 0x0, 0x44, 0x0, 0x2, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x44, 0x0, 0x3, 0x0, 0x0, 0x0, 0x4, 0x0, 0xa, 0x0, 0x0, 0x0, 0x44, 0x0, 0x4, 0x0, 0x0, 0x0, 0x4, 0x0, 0xe1, 0xff, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x44, 0x0, 0x6, 0x0, 0x0, 0x0, 0x4, 0x0, 0x0, 0x0, 0x0, 0x0, 0x44, 0x0, 0x7, 0x0, 0x0, 0x0, 0x4, 0x0, 0x0, 0x0, 0x0, 0x0, 0x44, 0x0, 0x8, 0x0, 0x0, 0x0, 0x4, 0x0, 0x2, 0x0, 0x0, 0x0, 0x44, 0x0, 0x9, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x44, 0x0, 0xa, 0x0, 0x0, 0x0, 0x4, 0x0, 0x7e, 0x0, 0x0, 0x0},
				Payload:  []uint8{0x40, 0x0, 0x0, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xcc, 0xfa, 0x0, 0xad, 0x79, 0xe8, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xa0, 0x41, 0x0, 0x0, 0x1, 0x4, 0x2, 0x4, 0xb, 0x16, 0x32, 0x8, 0xc, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6c, 0x3, 0x1, 0x1, 0x2d, 0x1a, 0x2d, 0x11, 0x17, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x7f, 0x8, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x40, 0xdd, 0x9, 0x0, 0x10, 0x18, 0x2, 0x0, 0x0, 0x10, 0x0, 0x0, 0xdd, 0x1e, 0x0, 0x90, 0x4c, 0x33, 0x2d, 0x11, 0x17, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}, Code: 0x44, Length: 0x90, DeviceName: "ra0\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
			Values: []PrismValue{
				PrismValue{DID: PrismDIDType1HostTime, Status: 0x0, Length: 0x4, Data: []uint8{0xf9, 0xc1, 0x29, 0x0}},
				PrismValue{DID: PrismDIDType1MACTime, Status: 0x0, Length: 0x0, Data: []uint8{}},
				PrismValue{DID: PrismDIDType1Channel, Status: 0x0, Length: 0x4, Data: []uint8{0xa, 0x0, 0x0, 0x0}},
				PrismValue{DID: PrismDIDType1RSSI, Status: 0x0, Length: 0x4, Data: []uint8{0xe1, 0xff, 0xff, 0xff}},
				PrismValue{DID: 0x0, Status: 0x0, Length: 0x0, Data: []uint8{}},
				PrismValue{DID: PrismDIDType1Signal, Status: 0x0, Length: 0x4, Data: []uint8{0x0, 0x0, 0x0, 0x0}},
				PrismValue{DID: PrismDIDType1Noise, Status: 0x0, Length: 0x4, Data: []uint8{0x0, 0x0, 0x0, 0x0}},
				PrismValue{DID: PrismDIDType1Rate, Status: 0x0, Length: 0x4, Data: []uint8{0x2, 0x0, 0x0, 0x0}},
				PrismValue{DID: PrismDIDType1TransmittedFrameIndicator, Status: 0x0, Length: 0x0, Data: []uint8{}},
				PrismValue{DID: PrismDIDType1FrameLength, Status: 0x0, Length: 0x4, Data: []uint8{0x7e, 0x0, 0x0, 0x0}},
			},
		}

		if !reflect.DeepEqual(got, want) {
			t.Errorf("RadioTap packet processing failed:\ngot  :\n%#v\n\nwant :\n%#v\n\n", got, want)
		}
	}

	if got, ok := p.Layer(LayerTypeDot11).(*Dot11); ok {
		want := &Dot11{
			BaseLayer: BaseLayer{
				Contents: []uint8{0x40, 0x0, 0x0, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xcc, 0xfa, 0x0, 0xad, 0x79, 0xe8, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xa0, 0x41},
				Payload:  []uint8{0x0, 0x0, 0x1, 0x4, 0x2, 0x4, 0xb, 0x16, 0x32, 0x8, 0xc, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6c, 0x3, 0x1, 0x1, 0x2d, 0x1a, 0x2d, 0x11, 0x17, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x7f, 0x8, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x40, 0xdd, 0x9, 0x0, 0x10, 0x18, 0x2, 0x0, 0x0, 0x10, 0x0, 0x0, 0xdd, 0x1e, 0x0, 0x90, 0x4c, 0x33, 0x2d, 0x11, 0x17, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
			},
			Type:           0x10,
			Proto:          0x0,
			Flags:          0x0,
			DurationID:     0x0,
			Address1:       net.HardwareAddr{0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
			Address2:       net.HardwareAddr{0xcc, 0xfa, 0x0, 0xad, 0x79, 0xe8},
			Address3:       net.HardwareAddr{0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
			Address4:       net.HardwareAddr(nil),
			SequenceNumber: 0x106,
			FragmentNumber: 0x20,
			Checksum:       0x0,
		}

		if !reflect.DeepEqual(got, want) {
			t.Errorf("Dot11 packet processing failed:\ngot  :\n%#v\n\nwant :\n%#v\n\n", got, want)
		}
	}
}
开发者ID:npe9，项目名称:minimega，代码行数:55，代码来源:prism_test.go

示例8: TestPacketICMPv6

func TestPacketICMPv6(t *testing.T) {
	p := gopacket.NewPacket(testPacketICMPv6, LinkTypeEthernet, gopacket.Default)
	if p.ErrorLayer() != nil {
		t.Error("Failed to decode packet:", p.ErrorLayer().Error())
	}
	checkLayers(p, []gopacket.LayerType{LayerTypeEthernet, LayerTypeIPv6, LayerTypeICMPv6, gopacket.LayerTypePayload}, t)
	if got, ok := p.Layer(LayerTypeIPv6).(*IPv6); ok {
		want := &IPv6{
			BaseLayer: BaseLayer{
				Contents: []byte{0x60, 0x0, 0x0, 0x0, 0x0, 0x18,
					0x3a, 0xff, 0x26, 0x20, 0x0, 0x0, 0x10, 0x5, 0x0, 0x0, 0x26, 0xbe, 0x5,
					0xff, 0xfe, 0x27, 0xb, 0x17, 0xfe, 0x80, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
					0x2, 0x1f, 0xca, 0xff, 0xfe, 0xb3, 0x76, 0x40},
				Payload: []byte{0x88, 0x0, 0x1e, 0xd6, 0x40, 0x0, 0x0, 0x0, 0x26, 0x20,
					0x0, 0x0, 0x10, 0x5, 0x0, 0x0, 0x26, 0xbe, 0x5, 0xff, 0xfe, 0x27, 0xb,
					0x17},
			},
			Version:      6,
			TrafficClass: 0,
			FlowLabel:    0,
			Length:       24,
			NextHeader:   IPProtocolICMPv6,
			HopLimit:     255,
			SrcIP:        net.IP{0x26, 0x20, 0x0, 0x0, 0x10, 0x5, 0x0, 0x0, 0x26, 0xbe, 0x5, 0xff, 0xfe, 0x27, 0xb, 0x17},
			DstIP:        net.IP{0xfe, 0x80, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x2, 0x1f, 0xca, 0xff, 0xfe, 0xb3, 0x76, 0x40},
		}
		if !reflect.DeepEqual(got, want) {
			t.Errorf("IPv6 packet processing failed:\ngot  :\n%#v\n\nwant :\n%#v\n\n", got, want)
		}
	} else {
		t.Error("No IPv6 layer type found in packet")
	}
	if got, ok := p.Layer(LayerTypeICMPv6).(*ICMPv6); ok {
		want := &ICMPv6{
			BaseLayer: BaseLayer{
				Contents: []byte{0x88, 0x0, 0x1e, 0xd6, 0x40, 0x0, 0x0, 0x0},
				Payload: []byte{0x26, 0x20, 0x0, 0x0, 0x10,
					0x5, 0x0, 0x0, 0x26, 0xbe, 0x5, 0xff, 0xfe, 0x27, 0xb, 0x17},
			},
			TypeCode:  0x8800,
			Checksum:  0x1ed6,
			TypeBytes: []byte{0x40, 0x0, 0x0, 0x0},
		}
		if !reflect.DeepEqual(got, want) {
			t.Errorf("ICMPv6 packet processing failed:\ngot  :\n%#v\n\nwant :\n%#v\n\n", got, want)
		}
		if got.TypeCode.String() != "NeighborAdvertisement(0)" {
			t.Errorf("ICMPv6 type code, got %q want 'NeighborAdvertisement(0)'", got.TypeCode.String())
		}
	} else {
		t.Error("No ICMPv6 layer type found in packet")
	}
}
开发者ID:npe9，项目名称:minimega，代码行数:53，代码来源:icmp6_test.go

示例9: TestPacketRadiotap0

func TestPacketRadiotap0(t *testing.T) {
	p := gopacket.NewPacket(testPacketRadiotap0, LayerTypeRadioTap, gopacket.Default)
	if p.ErrorLayer() != nil {
		t.Error("Failed to decode packet:", p.ErrorLayer().Error())
	}
	checkLayers(p, []gopacket.LayerType{LayerTypeRadioTap, LayerTypeDot11}, t)
	rt := p.Layer(LayerTypeRadioTap).(*RadioTap)
	if rt.ChannelFrequency != 2412 || rt.DBMAntennaSignal != -58 || rt.Antenna != 7 {
		t.Error("Radiotap decode error")
	}
	if rt.Rate != 2 { // 500Kbps unit
		t.Error("Radiotap Rate decode error")
	}
}
开发者ID:npe9，项目名称:minimega，代码行数:14，代码来源:radiotap_test.go

示例10: loadDNS

func loadDNS(dnspacket []byte, t *testing.T) *DNS {
	p := gopacket.NewPacket(dnspacket, LinkTypeEthernet, gopacket.Default)
	if p.ErrorLayer() != nil {
		t.Error("Failed to decode packet:", p.ErrorLayer().Error())
	}
	checkLayers(p, []gopacket.LayerType{LayerTypeEthernet, LayerTypeIPv4,
		LayerTypeUDP, LayerTypeDNS}, t)

	dnsL := p.Layer(LayerTypeDNS)
	if dnsL == nil {
		t.Error("No DNS Layer found")
	}

	dns, ok := dnsL.(*DNS)
	if !ok {
		return nil
	}
	return dns
}
开发者ID:npe9，项目名称:minimega，代码行数:19，代码来源:udp_test.go

示例11: TestInformationElement

func TestInformationElement(t *testing.T) {
	bin := []byte{
		0, 0,
		0, 2, 1, 3,
		221, 5, 1, 2, 3, 4, 5,
	}
	pkt := gopacket.NewPacket(bin, LayerTypeDot11InformationElement, gopacket.NoCopy)

	buf := gopacket.NewSerializeBuffer()
	var sLayers []gopacket.SerializableLayer
	for _, l := range pkt.Layers() {
		sLayers = append(sLayers, l.(*Dot11InformationElement))
	}
	if err := gopacket.SerializeLayers(buf, gopacket.SerializeOptions{}, sLayers...); err != nil {
		t.Error(err.Error())
	}
	if !bytes.Equal(bin, buf.Bytes()) {
		t.Error("build failed")
	}
}
开发者ID:npe9，项目名称:minimega，代码行数:20，代码来源:dot11_test.go

示例12: TestUDPPacketDNS

func TestUDPPacketDNS(t *testing.T) {
	p := gopacket.NewPacket(testUDPPacketDNS, LinkTypeEthernet, gopacket.Default)
	if p.ErrorLayer() != nil {
		t.Error("Failed to decode packet:", p.ErrorLayer().Error())
	}
	checkLayers(p, []gopacket.LayerType{LayerTypeEthernet, LayerTypeIPv4, LayerTypeUDP, LayerTypeDNS}, t)
	if got, ok := p.TransportLayer().(*UDP); ok {
		want := &UDP{
			BaseLayer: BaseLayer{
				Contents: []byte{0x0, 0x35, 0x89, 0x6d, 0x0, 0xd2, 0x75, 0x4a},
				Payload: []byte{0xb8, 0xd8, 0x81, 0x80, 0x0, 0x1, 0x0,
					0x7, 0x0, 0x0, 0x0, 0x0, 0x4, 0x78, 0x6b, 0x63, 0x64, 0x3, 0x63, 0x6f,
					0x6d, 0x0, 0x0, 0xf, 0x0, 0x1, 0xc0, 0xc, 0x0, 0xf, 0x0, 0x1, 0x0, 0x0,
					0x2, 0x58, 0x0, 0x18, 0x0, 0x14, 0x4, 0x41, 0x4c, 0x54, 0x32, 0x5, 0x41,
					0x53, 0x50, 0x4d, 0x58, 0x1, 0x4c, 0x6, 0x47, 0x4f, 0x4f, 0x47, 0x4c,
					0x45, 0xc0, 0x11, 0xc0, 0xc, 0x0, 0xf, 0x0, 0x1, 0x0, 0x0, 0x2, 0x58, 0x0,
					0x16, 0x0, 0x1e, 0x6, 0x41, 0x53, 0x50, 0x4d, 0x58, 0x32, 0xa, 0x47, 0x4f,
					0x4f, 0x47, 0x4c, 0x45, 0x4d, 0x41, 0x49, 0x4c, 0xc0, 0x11, 0xc0, 0xc,
					0x0, 0xf, 0x0, 0x1, 0x0, 0x0, 0x2, 0x58, 0x0, 0xb, 0x0, 0x1e, 0x6, 0x41,
					0x53, 0x50, 0x4d, 0x58, 0x33, 0xc0, 0x53, 0xc0, 0xc, 0x0, 0xf, 0x0, 0x1,
					0x0, 0x0, 0x2, 0x58, 0x0, 0xb, 0x0, 0x1e, 0x6, 0x41, 0x53, 0x50, 0x4d,
					0x58, 0x34, 0xc0, 0x53, 0xc0, 0xc, 0x0, 0xf, 0x0, 0x1, 0x0, 0x0, 0x2,
					0x58, 0x0, 0xb, 0x0, 0x1e, 0x6, 0x41, 0x53, 0x50, 0x4d, 0x58, 0x35, 0xc0,
					0x53, 0xc0, 0xc, 0x0, 0xf, 0x0, 0x1, 0x0, 0x0, 0x2, 0x58, 0x0, 0x4, 0x0,
					0xa, 0xc0, 0x2d, 0xc0, 0xc, 0x0, 0xf, 0x0, 0x1, 0x0, 0x0, 0x2, 0x58, 0x0,
					0x9, 0x0, 0x14, 0x4, 0x41, 0x4c, 0x54, 0x31, 0xc0, 0x2d},
			},
			SrcPort:  53,
			DstPort:  35181,
			Length:   210,
			Checksum: 30026,
			sPort:    []byte{0x0, 0x35},
			dPort:    []byte{0x89, 0x6d},
		}
		if !reflect.DeepEqual(got, want) {
			t.Errorf("UDP packet mismatch:\ngot  :\n%#v\n\nwant :\n%#v\n\n", got, want)
		}
	} else {
		t.Error("Transport layer packet not UDP")
	}
}
开发者ID:npe9，项目名称:minimega，代码行数:41，代码来源:udp_test.go

示例13: TestPacketDot11MgmtBeacon

func TestPacketDot11MgmtBeacon(t *testing.T) {
	p := gopacket.NewPacket(testPacketDot11MgmtBeacon, LinkTypeIEEE80211Radio, gopacket.Default)
	if p.ErrorLayer() != nil {
		t.Error("Failed to decode packet:", p.ErrorLayer().Error())
	}

	checkLayers(p, []gopacket.LayerType{LayerTypeRadioTap, LayerTypeDot11, LayerTypeDot11MgmtBeacon}, t)

	if got, ok := p.Layer(LayerTypeRadioTap).(*RadioTap); ok {
		want := &RadioTap{BaseLayer: BaseLayer{Contents: []uint8{0x0, 0x0, 0x20, 0x0, 0x67, 0x8, 0x4, 0x0, 0xe9, 0xa2, 0xfe, 0x25, 0x0, 0x0, 0x0, 0x0, 0x22, 0xc, 0xd8, 0xa0, 0x2, 0x0, 0x0, 0x0, 0x40, 0x1, 0x0, 0x0, 0x3c, 0x14, 0x24, 0x11}, Payload: []uint8{0x80, 0x0, 0x0, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0, 0x3, 0x7f, 0x7, 0xa0, 0x16, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xd0, 0x9b, 0x38, 0x40, 0x10, 0x28, 0x0, 0x0, 0x0, 0x0, 0x64, 0x0, 0x0, 0x5, 0x0, 0x0, 0x1, 0x8, 0x8c, 0x12, 0x98, 0x24, 0xb0, 0x48, 0x60, 0x6c, 0x3, 0x1, 0x24, 0x5, 0x4, 0x0, 0x1, 0x0, 0x0, 0x7, 0x2a, 0x55, 0x53, 0x20, 0x24, 0x1, 0x11, 0x28, 0x1, 0x11, 0x2c, 0x1, 0x11, 0x30, 0x1, 0x11, 0x34, 0x1, 0x17, 0x38, 0x1, 0x17, 0x3c, 0x1, 0x17, 0x40, 0x1, 0x17, 0x95, 0x1, 0x1e, 0x99, 0x1, 0x1e, 0x9d, 0x1, 0x1e, 0xa1, 0x1, 0x1e, 0xa5, 0x1, 0x1e, 0x20, 0x1, 0x0, 0xdd, 0x18, 0x0, 0x50, 0xf2, 0x2, 0x1, 0x1, 0x0, 0x0, 0x3, 0xa4, 0x0, 0x0, 0x27, 0xa4, 0x0, 0x0, 0x42, 0x43, 0x5e, 0x0, 0x62, 0x32, 0x2f, 0x0, 0x34, 0xc, 0x66, 0x72, 0x65, 0x65, 0x62, 0x73, 0x64, 0x2d, 0x6d, 0x65, 0x73, 0x68, 0x33, 0x17, 0x1, 0x0, 0xf, 0xac, 0x0, 0x0, 0xf, 0xac, 0x0, 0x0, 0xf, 0xac, 0xff, 0x0, 0xf, 0xac, 0xff, 0x0, 0xf, 0xac, 0xff, 0x0, 0xdf}}, Version: 0x0, Length: 0x20, Present: 0x40867, TSFT: 0x25fea2e9, Flags: 0x22, Rate: 0xc, ChannelFrequency: 0x0, ChannelFlags: 0x0, FHSS: 0x0, DBMAntennaSignal: -40, DBMAntennaNoise: -96, LockQuality: 0x0, TxAttenuation: 0x0, DBTxAttenuation: 0x0, DBMTxPower: 0, Antenna: 0x2, DBAntennaSignal: 0x0, DBAntennaNoise: 0x0}

		if !reflect.DeepEqual(got, want) {
			t.Errorf("RadioTap packet processing failed:\ngot  :\n%#v\n\nwant :\n%#v\n\n", got, want)
		}
	}

	if got, ok := p.Layer(LayerTypeDot11).(*Dot11); ok {
		want := &Dot11{
			BaseLayer: BaseLayer{
				Contents: []uint8{0x80, 0x0, 0x0, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0, 0x3, 0x7f, 0x7, 0xa0, 0x16, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xd0, 0x9b},
				Payload:  []uint8{0x38, 0x40, 0x10, 0x28, 0x0, 0x0, 0x0, 0x0, 0x64, 0x0, 0x0, 0x5, 0x0, 0x0, 0x1, 0x8, 0x8c, 0x12, 0x98, 0x24, 0xb0, 0x48, 0x60, 0x6c, 0x3, 0x1, 0x24, 0x5, 0x4, 0x0, 0x1, 0x0, 0x0, 0x7, 0x2a, 0x55, 0x53, 0x20, 0x24, 0x1, 0x11, 0x28, 0x1, 0x11, 0x2c, 0x1, 0x11, 0x30, 0x1, 0x11, 0x34, 0x1, 0x17, 0x38, 0x1, 0x17, 0x3c, 0x1, 0x17, 0x40, 0x1, 0x17, 0x95, 0x1, 0x1e, 0x99, 0x1, 0x1e, 0x9d, 0x1, 0x1e, 0xa1, 0x1, 0x1e, 0xa5, 0x1, 0x1e, 0x20, 0x1, 0x0, 0xdd, 0x18, 0x0, 0x50, 0xf2, 0x2, 0x1, 0x1, 0x0, 0x0, 0x3, 0xa4, 0x0, 0x0, 0x27, 0xa4, 0x0, 0x0, 0x42, 0x43, 0x5e, 0x0, 0x62, 0x32, 0x2f, 0x0, 0x34, 0xc, 0x66, 0x72, 0x65, 0x65, 0x62, 0x73, 0x64, 0x2d, 0x6d, 0x65, 0x73, 0x68, 0x33, 0x17, 0x1, 0x0, 0xf, 0xac, 0x0, 0x0, 0xf, 0xac, 0x0, 0x0, 0xf, 0xac, 0xff, 0x0, 0xf, 0xac, 0xff, 0x0, 0xf},
			},
			Type:           Dot11TypeMgmtBeacon,
			Proto:          0x0,
			Flags:          0x0,
			DurationID:     0x0,
			Address1:       net.HardwareAddr{0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
			Address2:       net.HardwareAddr{0x0, 0x3, 0x7f, 0x7, 0xa0, 0x16},
			Address3:       net.HardwareAddr{0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
			Address4:       net.HardwareAddr(nil),
			SequenceNumber: 0x26f, FragmentNumber: 0x10,
			Checksum: 0xdf00ffac,
		}

		if !reflect.DeepEqual(got, want) {
			t.Errorf("Dot11 packet processing failed:\ngot  :\n%#v\n\nwant :\n%#v\n\n", got, want)
		}
	}
}
开发者ID:npe9，项目名称:minimega，代码行数:39，代码来源:dot11_test.go

示例14: TestDecodeUDPSFlow

func TestDecodeUDPSFlow(t *testing.T) {
	p := gopacket.NewPacket(SFlowTestPacket1, LayerTypeEthernet, gopacket.Default)
	if p.ErrorLayer() != nil {
		t.Error("Failed to decode packet:", p.ErrorLayer().Error())
	}
	checkLayers(p, []gopacket.LayerType{LayerTypeEthernet, LayerTypeIPv4, LayerTypeUDP, LayerTypeSFlow}, t)
	if got, ok := p.TransportLayer().(*UDP); ok {
		want := &UDP{
			BaseLayer: BaseLayer{SFlowTestPacket1[34:42], SFlowTestPacket1[42:]},
			sPort:     []byte{199, 87},
			dPort:     []byte{24, 199},
			SrcPort:   51031,
			DstPort:   6343,
			Checksum:  8763,
			Length:    1448,
		}
		if !reflect.DeepEqual(want, got) {
			t.Errorf("UDP layer mismatch, \nwant  %#v\ngot %#v\n", want, got)
		}
	} else {
		t.Error("Transport layer packet not UDP")
	}
}
开发者ID:npe9，项目名称:minimega，代码行数:23，代码来源:sflow_test.go

示例15: TestPacketDot11MgmtAction

func TestPacketDot11MgmtAction(t *testing.T) {
	p := gopacket.NewPacket(testPacketDot11MgmtAction, LinkTypeIEEE80211Radio, gopacket.Default)
	if p.ErrorLayer() != nil {
		t.Error("Failed to decode packet:", p.ErrorLayer().Error())
	}
	checkLayers(p, []gopacket.LayerType{LayerTypeRadioTap, LayerTypeDot11, LayerTypeDot11MgmtAction}, t)

	want := `PACKET: 97 bytes
- Layer 1 (32 bytes) = RadioTap	{Contents=[..32..] Payload=[..65..] Version=0 Length=32 Present=264295 TSFT=634199967 Flags=SHORT-PREAMBLE,DATAPAD Rate=6 Mb/s ChannelFrequency=0 MHz ChannelFlags= FHSS=0 DBMAntennaSignal=-41 DBMAntennaNoise=-96 LockQuality=0 TxAttenuation=0 DBTxAttenuation=0 DBMTxPower=0 Antenna=1 DBAntennaSignal=0 DBAntennaNoise=0}
- Layer 2 (24 bytes) = Dot11	{Contents=[..24..] Payload=[..37..] Type=MgmtAction Proto=0 Flags= DurationID=0 Address1=ff:ff:ff:ff:ff:ff Address2=00:03:7f:07:a0:16 Address3=00:03:7f:07:a0:16 Address4= SequenceNumber=10 FragmentNumber=32 Checksum=0}
- Layer 3 (37 bytes) = Dot11MgmtAction	{Contents=[..37..] Payload=[]}
`
	if got := p.String(); got != want {
		t.Errorf("packet string mismatch:\n---got---\n%q\n---want---\n%q", got, want)
	}
	if _, ok := p.Layer(LayerTypeDot11).(*Dot11); !ok {
		t.Errorf("could not get Dot11 layer from packet")
	} else {
		// See note above:  this checksum fails most likely due to datapad.
		// wireshark also says this packet is malformed, so I'm not going to waste
		// too much more time on it.
		//   if !got.ChecksumValid() { t.Errorf("Dot11 packet processing failed: checksum failed")	}
	}
}
开发者ID:npe9，项目名称:minimega，代码行数:24，代码来源:dot11_test.go


注：本文中的gopacket.NewPacket函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。