Golang gobot.Every函数代码示例

func main() {
	e := joule.NewAdaptor()
	led0 := gpio.NewLedDriver(e, "100")
	led1 := gpio.NewLedDriver(e, "101")
	led2 := gpio.NewLedDriver(e, "102")
	led3 := gpio.NewLedDriver(e, "103")

	work := func() {
		led0.Off()
		led1.Off()
		led2.Off()
		led3.Off()

		gobot.Every(1*time.Second, func() {
			led0.Toggle()
		})
		gobot.Every(2*time.Second, func() {
			led1.Toggle()
		})
		gobot.Every(4*time.Second, func() {
			led2.Toggle()
		})
		gobot.Every(8*time.Second, func() {
			led3.Toggle()
		})
	}

	robot := gobot.NewRobot("blinkBot",
		[]gobot.Connection{e},
		[]gobot.Device{led0, led1, led2, led3},
		work,
	)

	robot.Start()
}

func main() {
	adaptor := sphero.NewAdaptor("/dev/rfcomm0")
	spheroDriver := sphero.NewSpheroDriver(adaptor)

	work := func() {
		spheroDriver.SetDataStreaming(sphero.DefaultDataStreamingConfig())

		spheroDriver.On(sphero.Collision, func(data interface{}) {
			fmt.Printf("Collision! %+v\n", data)
		})

		spheroDriver.On(sphero.SensorData, func(data interface{}) {
			fmt.Printf("Streaming Data! %+v\n", data)
		})

		gobot.Every(3*time.Second, func() {
			spheroDriver.Roll(30, uint16(gobot.Rand(360)))
		})

		gobot.Every(1*time.Second, func() {
			r := uint8(gobot.Rand(255))
			g := uint8(gobot.Rand(255))
			b := uint8(gobot.Rand(255))
			spheroDriver.SetRGB(r, g, b)
		})
	}

	robot := gobot.NewRobot("sphero",
		[]gobot.Connection{adaptor},
		[]gobot.Device{spheroDriver},
		work,
	)

	robot.Start()
}

func main() {
	mqttAdaptor := mqtt.NewAdaptor("tcp://test.mosquitto.org:1883", "pinger")

	work := func() {
		mqttAdaptor.On("hello", func(data []byte) {
			fmt.Println("hello")
		})
		mqttAdaptor.On("hola", func(data []byte) {
			fmt.Println("hola")
		})
		data := []byte("o")
		gobot.Every(1*time.Second, func() {
			mqttAdaptor.Publish("hello", data)
		})
		gobot.Every(5*time.Second, func() {
			mqttAdaptor.Publish("hola", data)
		})
	}

	robot := gobot.NewRobot("mqttBot",
		[]gobot.Connection{mqttAdaptor},
		work,
	)

	robot.Start()
}

func main() {
	mqttAdaptor := mqtt.NewAdaptor("tcp://test.mosquitto.org:1883", "blinker")
	firmataAdaptor := firmata.NewAdaptor("/dev/ttyACM0")
	led := gpio.NewLedDriver(firmataAdaptor, "13")

	work := func() {
		mqttAdaptor.On("lights/on", func(data []byte) {
			led.On()
		})
		mqttAdaptor.On("lights/off", func(data []byte) {
			led.Off()
		})
		data := []byte("")
		gobot.Every(1*time.Second, func() {
			mqttAdaptor.Publish("lights/on", data)
		})
		gobot.Every(2*time.Second, func() {
			mqttAdaptor.Publish("lights/off", data)
		})
	}

	robot := gobot.NewRobot("mqttBot",
		[]gobot.Connection{mqttAdaptor, firmataAdaptor},
		[]gobot.Device{led},
		work,
	)

	robot.Start()
}

func NewSwarmBot(port string) *gobot.Robot {
	spheroAdaptor := sphero.NewAdaptor(port)
	spheroDriver := sphero.NewSpheroDriver(spheroAdaptor)
	spheroDriver.SetName("Sphero" + port)

	work := func() {
		spheroDriver.Stop()

		spheroDriver.On(sphero.Collision, func(data interface{}) {
			fmt.Println("Collision Detected!")
		})

		gobot.Every(1*time.Second, func() {
			spheroDriver.Roll(100, uint16(gobot.Rand(360)))
		})
		gobot.Every(3*time.Second, func() {
			spheroDriver.SetRGB(uint8(gobot.Rand(255)),
				uint8(gobot.Rand(255)),
				uint8(gobot.Rand(255)),
			)
		})
	}

	robot := gobot.NewRobot("sphero",
		[]gobot.Connection{spheroAdaptor},
		[]gobot.Device{spheroDriver},
		work,
	)

	return robot
}

func main() {
	firmataAdaptor := firmata.NewAdaptor("/dev/ttyACM0")
	led1 := gpio.NewLedDriver(firmataAdaptor, "3")
	led2 := gpio.NewLedDriver(firmataAdaptor, "4")
	button := gpio.NewButtonDriver(firmataAdaptor, "2")
	sensor := gpio.NewAnalogSensorDriver(firmataAdaptor, "0")

	work := func() {
		gobot.Every(1*time.Second, func() {
			led1.Toggle()
		})
		gobot.Every(2*time.Second, func() {
			led2.Toggle()
		})
		button.On(gpio.ButtonPush, func(data interface{}) {
			led2.On()
		})
		button.On(gpio.ButtonRelease, func(data interface{}) {
			led2.Off()
		})
		sensor.On(gpio.Data, func(data interface{}) {
			fmt.Println("sensor", data)
		})
	}

	robot := gobot.NewRobot("bot",
		[]gobot.Connection{firmataAdaptor},
		[]gobot.Device{led1, led2, button, sensor},
		work,
	)

	robot.Start()
}

func main() {
	natsAdaptor := nats.NewAdaptorWithAuth("localhost:4222", 1234, "user", "pass")

	work := func() {
		natsAdaptor.On("hello", func(data []byte) {
			fmt.Println("hello")
		})
		natsAdaptor.On("hola", func(data []byte) {
			fmt.Println("hola")
		})
		data := []byte("o")
		gobot.Every(1*time.Second, func() {
			natsAdaptor.Publish("hello", data)
		})
		gobot.Every(5*time.Second, func() {
			natsAdaptor.Publish("hola", data)
		})
	}

	robot := gobot.NewRobot("natsBot",
		[]gobot.Connection{natsAdaptor},
		work,
	)

	robot.Start()
}

func main() {
	master := gobot.NewMaster()

	spheros := []string{
		"/dev/rfcomm0",
		"/dev/rfcomm1",
		"/dev/rfcomm2",
	}

	for _, port := range spheros {
		spheroAdaptor := sphero.NewAdaptor(port)

		cell := sphero.NewSpheroDriver(spheroAdaptor)
		cell.SetName("Sphero" + port)

		work := func() {
			conway := new(conway)
			conway.cell = cell

			conway.birth()

			cell.On(sphero.Collision, func(data interface{}) {
				conway.contact()
			})

			gobot.Every(3*time.Second, func() {
				if conway.alive {
					conway.movement()
				}
			})

			gobot.Every(10*time.Second, func() {
				if conway.alive {
					conway.birthday()
				}
			})
		}

		robot := gobot.NewRobot("conway",
			[]gobot.Connection{spheroAdaptor},
			[]gobot.Device{cell},
			work,
		)

		master.AddRobot(robot)
	}

	master.Start()
}

func main() {
	firmataAdaptor := firmata.NewAdaptor("/dev/ttyACM0")

	work := func() {
		gobot.Every(1*time.Second, func() {
			val, err := firmataAdaptor.AnalogRead("0")
			if err != nil {
				fmt.Println(err)
				return
			}

			voltage := (float64(val) * 5) / 1024 // if using 3.3V replace 5 with 3.3
			tempC := (voltage - 0.5) * 100
			tempF := (tempC * 9 / 5) + 32

			fmt.Printf("%.2f°C\n", tempC)
			fmt.Printf("%.2f°F\n", tempF)
		})
	}

	robot := gobot.NewRobot("sensorBot",
		[]gobot.Connection{firmataAdaptor},
		[]gobot.Device{},
		work,
	)

	robot.Start()
}

func main() {
	// use "/dev/ttyUSB0" if connecting with USB cable
	// use "/dev/ttyAMA0" on devices older than Raspberry Pi 3 Model B
	megaPiAdaptor := megapi.NewAdaptor("/dev/ttyS0")
	motor := megapi.NewMotorDriver(megaPiAdaptor, 1)

	work := func() {
		speed := int16(0)
		fadeAmount := int16(30)

		gobot.Every(100*time.Millisecond, func() {
			motor.Speed(speed)
			speed = speed + fadeAmount
			if speed == 0 || speed == 300 {
				fadeAmount = -fadeAmount
			}
		})
	}

	robot := gobot.NewRobot("megaPiBot",
		[]gobot.Connection{megaPiAdaptor},
		[]gobot.Device{motor},
		work,
	)

	robot.Start()
}

func main() {
	core := particle.NewAdaptor(os.Args[1], os.Args[2])
	led := gpio.NewLedDriver(core, "A1")

	work := func() {
		brightness := uint8(0)
		fadeAmount := uint8(25)

		gobot.Every(500*time.Millisecond, func() {
			led.Brightness(brightness)
			brightness = brightness + fadeAmount
			if brightness == 0 || brightness == 255 {
				fadeAmount = -fadeAmount
			}
		})
	}

	robot := gobot.NewRobot("spark",
		[]gobot.Connection{core},
		[]gobot.Device{led},
		work,
	)

	robot.Start()
}

func main() {
	master := gobot.NewMaster()
	firmataAdaptor := firmata.NewAdaptor("/dev/ttyACM0")
	red := gpio.NewLedDriver(firmataAdaptor, "7")
	red.SetName("red")
	green := gpio.NewLedDriver(firmataAdaptor, "6")
	green.SetName("green")
	blue := gpio.NewLedDriver(firmataAdaptor, "5")
	blue.SetName("blue")

	work := func() {
		checkTravis(master.Robot("travis"))
		gobot.Every(10*time.Second, func() {
			checkTravis(master.Robot("travis"))
		})
	}

	robot := gobot.NewRobot("travis",
		[]gobot.Connection{firmataAdaptor},
		[]gobot.Device{red, green, blue},
		work,
	)

	master.AddRobot(robot)
	master.Start()
}

func main() {
	firmataAdaptor := firmata.NewAdaptor("/dev/ttyACM0")
	motor := gpio.NewMotorDriver(firmataAdaptor, "3")

	work := func() {
		speed := byte(0)
		fadeAmount := byte(15)

		gobot.Every(100*time.Millisecond, func() {
			motor.Speed(speed)
			speed = speed + fadeAmount
			if speed == 0 || speed == 255 {
				fadeAmount = -fadeAmount
			}
		})
	}

	robot := gobot.NewRobot("motorBot",
		[]gobot.Connection{firmataAdaptor},
		[]gobot.Device{motor},
		work,
	)

	robot.Start()
}

func main() {
	board := edison.NewAdaptor()
	board.SetBoard("miniboard")

	accel := i2c.NewGroveAccelerometerDriver(board)

	work := func() {
		gobot.Every(500*time.Millisecond, func() {
			if x, y, z, err := accel.XYZ(); err == nil {
				fmt.Println(x, y, z)
				fmt.Println(accel.Acceleration(x, y, z))
			} else {
				fmt.Println(err)
			}
		})
	}

	robot := gobot.NewRobot("accelBot",
		[]gobot.Connection{board},
		[]gobot.Device{accel},
		work,
	)

	robot.Start()
}

func main() {
	board := edison.NewAdaptor()
	screen := i2c.NewGroveLcdDriver(board)

	work := func() {
		screen.Write("hello")

		screen.SetRGB(255, 0, 0)

		gobot.After(5*time.Second, func() {
			screen.Clear()
			screen.Home()
			screen.SetRGB(0, 255, 0)
			// set a custom character in the first position
			screen.SetCustomChar(0, i2c.CustomLCDChars["smiley"])
			// add the custom character at the end of the string
			screen.Write("goodbye\nhave a nice day " + string(byte(0)))
			gobot.Every(500*time.Millisecond, func() {
				screen.Scroll(false)
			})
		})

		screen.Home()
		time.Sleep(1 * time.Second)
		screen.SetRGB(0, 0, 255)
	}

	robot := gobot.NewRobot("screenBot",
		[]gobot.Connection{board},
		[]gobot.Device{screen},
		work,
	)

	robot.Start()
}