当前位置: 首页>>代码示例>>Golang>>正文


Golang SComplex128Obj.Ch方法代码示例

本文整理汇总了Golang中github.com/wiless/gocomm.SComplex128Obj.Ch方法的典型用法代码示例。如果您正苦于以下问题:Golang SComplex128Obj.Ch方法的具体用法?Golang SComplex128Obj.Ch怎么用?Golang SComplex128Obj.Ch使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在github.com/wiless/gocomm.SComplex128Obj的用法示例。


在下文中一共展示了SComplex128Obj.Ch方法的10个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。

示例1: FadingChannel

/// Fading/AWGN Channel that operates on each sample
func (m *ChannelEmulator) FadingChannel(InCH gocomm.Complex128Channel) {
	outCH := m.Pins["symbolOut"].Channel.(gocomm.Complex128Channel)
	NextSize := 1
	N0 := .01 /// 10dB SNR
	var chdataOut gocomm.SComplex128Obj
	var chdataIn gocomm.SComplex128Obj
	for i := 0; i < NextSize; i++ {

		chdataIn = <-InCH
		sample := chdataIn.Ch
		chdataOut.Message = chdataIn.Message
		chdataOut.MaxExpected = chdataIn.MaxExpected
		NextSize = chdataIn.MaxExpected

		var hn complex128
		if chdataIn.Message == "BYPASS" {
			hn = 1
			chdataOut.Ch = sample
		} else {
			hn = sources.RandNC(N0)
			psample := sample * hn
			chdataOut.Ch = psample
		}

		outCH <- chdataOut
	}

}
开发者ID:postfix,项目名称:gocomm,代码行数:29,代码来源:awgn.go

示例2: main

func main() {
	var channel core.MPChannel
	channel.InitializeChip()
	N := 100

	param := core.NewIIDChannel()
	param.Ts = 4
	pdp := vlib.VectorF{1, .1}
	param.SetPDP(pdp)
	param.Mode = ""
	channel.InitParam(param)
	// samples := vlib.VectorC(sources.RandNCVec(N, 1))
	samples := vlib.NewOnesC(N)

	var data gocomm.SComplex128Obj
	data.Ts = 2
	for i := 0; i < N; i++ {
		data.Ch = samples[i]
		// fmt.Printf("\n Input %d = %v", i, data)
		chout := channel.ChannelFn(data)
		fmt.Printf("\n  %d I/O : %v ==> %v", i, data.Ch, chout.Ch)
		data.UpdateTimeStamp()
	}

}
开发者ID:postfix,项目名称:gocomm,代码行数:25,代码来源:testchannel.go

示例3: Modulate

func (m *Modem) Modulate(bitchan gocomm.BitChannel, symbolChannel gocomm.Complex128Channel) {
	// fmt.Printf("\n Reading bits from  %v", bitchan.Ch)
	var chdataIn gocomm.SBitObj
	var chdataOut gocomm.SComplex128Obj

	// fmt.Printf("\n MaxSymbols expected is %d , message = %v", bitchan.MaxExpected, bitchan.Message)

	var bits []uint8
	bits = make([]uint8, m.bitsPerSymbol)
	length := m.bitsPerSymbol
	N := m.bitsPerSymbol

	for i := 0; i < length; i++ {
		chdataIn = <-bitchan
		chdataOut.MaxExpected = chdataIn.MaxExpected / 2
		bits[i] = chdataIn.Ch
	}

	key := toStr(bits[0:N])
	chdataOut.Ch = m.constellationTable[key]
	symbolChannel <- chdataOut

	// fmt.Printf("\n Writing symbols to  %v", symbolChannel.Ch)

}
开发者ID:postfix,项目名称:gocomm,代码行数:25,代码来源:modem.go

示例4: ModulateBlock

func (m *Modem) ModulateBlock(OutBlockSize int, bitchan gocomm.BitChannel, symbolChannel gocomm.Complex128Channel) {

	for i := 0; i < OutBlockSize; i++ {
		var chdataIn gocomm.SBitObj
		var chdataOut gocomm.SComplex128Obj

		// fmt.Printf("\n MaxSymbols expected is %d , message = %v", bitchan.MaxExpected, bitchan.Message)

		var bits []uint8
		bits = make([]uint8, m.bitsPerSymbol)
		length := m.bitsPerSymbol
		N := m.bitsPerSymbol

		for i := 0; i < length; i++ {
			chdataIn = <-bitchan
			chdataOut.MaxExpected = chdataIn.MaxExpected / 2
			chdataOut.Message = chdataIn.Message
			bits[i] = chdataIn.Ch
			OutBlockSize = chdataIn.MaxExpected

		}

		key := toStr(bits[0:N])
		chdataOut.Ch = m.constellationTable[key]

		symbolChannel <- chdataOut
	}
	// close(bitchan.Ch)
}
开发者ID:postfix,项目名称:gocomm,代码行数:29,代码来源:modem.go

示例5: AWGNChannel

func (m *ChannelEmulator) AWGNChannel(dummy gocomm.Complex128Channel) {
	// fmt.Printf("\n Noise ready to Input %v", dummy)
	outCH := m.Pins["symbolOut"].Channel.(gocomm.Complex128Channel)
	// fmt.Printf("\n Output ready to Output %v", outCH)
	var chdataOut gocomm.SComplex128Obj
	var chdataIn gocomm.SComplex128Obj
	samples := 1
	// result := make([]complex64, samples)
	var StdDev float64 = math.Sqrt(m.noise * .5)
	var Mean float64 = m.Mean
	var noise complex128
	// var noisevector vlib.VectorC
	for i := 0; i < samples; i++ {

		chdataIn = <-dummy
		chdataOut.MaxExpected = chdataIn.MaxExpected
		samples = chdataIn.MaxExpected

		// fmt.Printf("\nAWGN expects %d samples @ %v", samples, dummy)
		chdataOut.Message = chdataIn.Message
		chdataOut.Ts = chdataIn.Ts
		chdataOut.TimeStamp = chdataIn.TimeStamp
		if !strings.Contains(chdataIn.Message, "BYPASS") {

			if Mean == 0 && StdDev == 1 {
				noise = complex128(complex(rand.NormFloat64(), rand.NormFloat64()))
			} else {
				noise = complex128(complex(rand.NormFloat64()*StdDev+Mean, rand.NormFloat64()*StdDev+Mean))

			}
			// noisevector = append(noisevector, noise)
			chdataOut.Ch = chdataIn.Ch + noise

		} else {
			chdataOut.Ch = chdataIn.Ch

		}
		//fmt.Printf("\nNoise%f=%f", StdDev, noisevector)
		outCH <- chdataOut
	}

}
开发者ID:postfix,项目名称:gocomm,代码行数:42,代码来源:awgn.go

示例6: DeSpread

func (cdma *CDMA) DeSpread(InCH gocomm.Complex128Channel, OutCH gocomm.Complex128Channel) {

	despcode := vlib.Conj(cdma.SpreadSequence)
	var result complex128
	for i := 0; i < len(despcode); i++ {
		rxchips := (<-InCH).Ch
		result += rxchips * cmplx.Conj(despcode[i])
	}
	var chdataOut gocomm.SComplex128Obj
	chdataOut.Ch = result
	OutCH <- chdataOut
}
开发者ID:postfix,项目名称:gocomm,代码行数:12,代码来源:cdma.go

示例7: ChannelDuplexer

func ChannelDuplexer(InCH gocomm.Complex128Channel, OutCHA []gocomm.Complex128Channel) {
	Nchanels := len(OutCHA)
	var chdataIn gocomm.SComplex128Obj
	var chdataOut gocomm.SComplex128Obj
	NextSize := 1
	for cnt := 0; cnt < NextSize; cnt++ {
		chdataIn = <-InCH
		data := chdataIn.Ch
		NextSize = chdataIn.MaxExpected

		// fmt.Printf("%d InputDuplexer : %v ", cnt, data)
		for i := 0; i < Nchanels; i++ {
			chdataOut.Ch = data
			chdataOut.MaxExpected = NextSize
			chdataOut.Message = chdataIn.Message
			OutCHA[i] <- chdataOut
		}
	}
	close(InCH)
}
开发者ID:postfix,项目名称:gocomm,代码行数:20,代码来源:wire.go

示例8: DeModulateBlock

func (m *Modem) DeModulateBlock(OutBlockSize int, InCH gocomm.Complex128Channel, outCH gocomm.Complex128Channel) {
	var chdataIn gocomm.SComplex128Obj
	var chdataOut gocomm.SComplex128Obj

	for i := 0; i < OutBlockSize; i++ {
		chdataIn = <-InCH
		symbol := chdataIn.Ch
		OutBlockSize = chdataIn.MaxExpected

		bits := m.DeModulateBits(symbol)
		result := complex(float64(bits[0]), float64(bits[1]))

		chdataOut.Ch = result
		chdataOut.MaxExpected = OutBlockSize
		chdataOut.Message = chdataIn.Message
		// fmt.Printf("\n Writing demod bits to  %v ", outCH.Ch)
		outCH <- chdataOut
	}
	// close(InCH.Ch)
}
开发者ID:postfix,项目名称:gocomm,代码行数:20,代码来源:modem.go

示例9: DeSpreadBlock

func (cdma *CDMA) DeSpreadBlock(expectedInputSize int, chInway gocomm.Complex128AChannel, OutCH gocomm.Complex128Channel) {

	despcode := vlib.Conj(cdma.SpreadSequence)

	SF := len(despcode)

	despcode = despcode.Scale(1. / (float64(SF)))

	if SF == 0 {
		panic("Spreading Code not Set")
	}
	// maxSymbols := expectedInputSize / SF
	// rxsymbols := vlib.NewVectorC(maxSymbols)
	var recentBuffer vlib.VectorC
	for cnt := 0; cnt < expectedInputSize; {

		data := <-chInway
		rxlen := len(data.Ch)
		// log.Printf("\n Received %d samples out of %d/%d ", rxlen, cnt, expectedInputSize)
		cnt += rxlen
		recentBuffer = append(recentBuffer, data.Ch...)
		for {
			if recentBuffer.Size() < SF {

				break

			} else {
				// log.Printf("\n Symbol %d Ready to Despread with %d", sym, cnt)
				rxchips := recentBuffer[0:SF]
				recentBuffer = recentBuffer[SF:]
				rxsymbols := vlib.DotC(despcode, rxchips)
				var chdataOut gocomm.SComplex128Obj
				chdataOut.Ch = rxsymbols
				OutCH <- chdataOut

			}
		}
	}

	close(chInway)
}
开发者ID:postfix,项目名称:gocomm,代码行数:41,代码来源:cdma.go

示例10: GoFFTPerK

func GoFFTPerK(outputSymbol gocomm.Complex128Channel, inputsamples vlib.VectorC, k, N int, inverse bool) {

	kbyN := float64(k) / float64(N)
	normalize := complex(1.0/math.Sqrt(float64(N)), 0)
	if !inverse {
		kbyN = kbyN * -1.0
	}

	fbins := vlib.NewVectorC(N)

	for n := 0; n < N; n++ {
		scale := kbyN * float64(n)
		binf := complex(0, 2.0*math.Pi*scale)
		fbins[n] = cmplx.Exp(binf)
	}
	result := vlib.GoDotC(inputsamples, fbins, 4) * normalize
	// result := vlib.DotC(inputsamples, fbins) * normalize

	var data gocomm.SComplex128Obj
	data.Ch = result
	outputSymbol <- data
}
开发者ID:postfix,项目名称:gocomm,代码行数:22,代码来源:fft.go


注:本文中的github.com/wiless/gocomm.SComplex128Obj.Ch方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。