Golang Nameserver.Stop方法代码示例

//.........这里部分代码省略.........

	if ifaceName != "" {
		config.Iface, err = weavenet.EnsureInterface(ifaceName, wait)
		if err != nil {
			Log.Fatal(err)
		}
	}

	if routerName == "" {
		if config.Iface == nil {
			Log.Fatal("Either an interface must be specified with --iface or a name with -name")
		}
		routerName = config.Iface.HardwareAddr.String()
	}
	name, err := weave.PeerNameFromUserInput(routerName)
	if err != nil {
		Log.Fatal(err)
	}

	if nickName == "" {
		nickName, err = os.Hostname()
		if err != nil {
			Log.Fatal(err)
		}
	}

	if password == "" {
		password = os.Getenv("WEAVE_PASSWORD")
	}
	if password == "" {
		Log.Println("Communication between peers is unencrypted.")
	} else {
		config.Password = []byte(password)
		Log.Println("Communication between peers is encrypted.")
	}

	if prof != "" {
		p := *profile.CPUProfile
		p.ProfilePath = prof
		p.NoShutdownHook = true
		defer profile.Start(&p).Stop()
	}

	config.BufSz = bufSzMB * 1024 * 1024
	config.LogFrame = logFrameFunc(pktdebug)
	config.PeerDiscovery = !noDiscovery

	router := weave.NewRouter(config, name, nickName)
	Log.Println("Our name is", router.Ourself)

	dockerCli, err := docker.NewClient(apiPath)
	if err != nil {
		Log.Fatal("Unable to start docker client: ", err)
	}

	var allocator *ipam.Allocator
	var defaultSubnet address.CIDR
	if iprangeCIDR != "" {
		allocator, defaultSubnet = createAllocator(router, iprangeCIDR, ipsubnetCIDR, determineQuorum(peerCount, peers))
		if err = dockerCli.AddObserver(allocator); err != nil {
			Log.Fatal("Unable to start watcher", err)
		}
	} else if peerCount > 0 {
		Log.Fatal("--init-peer-count flag specified without --ipalloc-range")
	}

	var (
		ns        *nameserver.Nameserver
		dnsserver *nameserver.DNSServer
	)
	if !noDNS {
		ns = nameserver.New(router.Ourself.Peer.Name, router.Peers, dockerCli, dnsDomain)
		ns.SetGossip(router.NewGossip("nameserver", ns))
		if err = dockerCli.AddObserver(ns); err != nil {
			Log.Fatal("Unable to start watcher", err)
		}
		ns.Start()
		defer ns.Stop()
		dnsserver, err = nameserver.NewDNSServer(ns, dnsDomain, dnsPort, uint32(dnsTTL), dnsClientTimeout)
		if err != nil {
			Log.Fatal("Unable to start dns server: ", err)
		}
		dnsserver.ActivateAndServe()
		defer dnsserver.Stop()
	}

	router.Start()
	if errors := router.ConnectionMaker.InitiateConnections(peers, false); len(errors) > 0 {
		Log.Fatal(errorMessages(errors))
	}

	// The weave script always waits for a status call to succeed,
	// so there is no point in doing "weave launch --http-addr ''".
	// This is here to support stand-alone use of weaver.
	if httpAddr != "" {
		go handleHTTP(router, httpAddr, allocator, defaultSubnet, dockerCli, ns, dnsserver)
	}

	SignalHandlerLoop(router)
}

//.........这里部分代码省略.........
	if routerName == "" {
		if iface == nil {
			Log.Fatal("Either an interface must be specified with --iface or a name with -name")
		}
		routerName = iface.HardwareAddr.String()
	}

	name, err := weave.PeerNameFromUserInput(routerName)
	if err != nil {
		Log.Fatal(err)
	}

	if nickName == "" {
		nickName, err = os.Hostname()
		if err != nil {
			Log.Fatal(err)
		}
	}

	if password == "" {
		password = os.Getenv("WEAVE_PASSWORD")
	}
	if password == "" {
		Log.Println("Communication between peers is unencrypted.")
	} else {
		config.Password = []byte(password)
		Log.Println("Communication between peers is encrypted.")
	}

	if prof != "" {
		p := *profile.CPUProfile
		p.ProfilePath = prof
		p.NoShutdownHook = true
		defer profile.Start(&p).Stop()
	}

	config.PeerDiscovery = !noDiscovery
	config.Overlay = weave.NewSleeveOverlay(config.Port)

	if pktdebug {
		config.PacketLogging = packetLogging{}
	} else {
		config.PacketLogging = nopPacketLogging{}
	}

	router := weave.NewRouter(config, name, nickName)
	Log.Println("Our name is", router.Ourself)

	var dockerCli *docker.Client
	if dockerAPI != "" {
		dc, err := docker.NewClient(dockerAPI)
		if err != nil {
			Log.Fatal("Unable to start docker client: ", err)
		}
		dockerCli = dc
	}
	observeContainers := func(o docker.ContainerObserver) {
		if dockerCli != nil {
			if err = dockerCli.AddObserver(o); err != nil {
				Log.Fatal("Unable to start watcher", err)
			}
		}
	}
	var allocator *ipam.Allocator
	var defaultSubnet address.CIDR
	if iprangeCIDR != "" {

//.........这里部分代码省略.........
	mflag.DurationVar(&dnsConfig.ClientTimeout, []string{"-dns-fallback-timeout"}, nameserver.DefaultClientTimeout, "timeout for fallback DNS requests")
	mflag.StringVar(&dnsConfig.EffectiveListenAddress, []string{"-dns-effective-listen-address"}, "", "address DNS will actually be listening, after Docker port mapping")
	mflag.StringVar(&dnsConfig.ResolvConf, []string{"-resolv-conf"}, "", "path to resolver configuration for fallback DNS lookups")
	mflag.StringVar(&datapathName, []string{"-datapath"}, "", "ODP datapath name")
	mflag.StringVar(&trustedSubnetStr, []string{"-trusted-subnets"}, "", "comma-separated list of trusted subnets in CIDR notation")
	mflag.StringVar(&dbPrefix, []string{"-db-prefix"}, "/weavedb/weave", "pathname/prefix of filename to store data")
	mflag.BoolVar(&isAWSVPC, []string{"-awsvpc"}, false, "use AWS VPC for routing")

	// crude way of detecting that we probably have been started in a
	// container, with `weave launch` --> suppress misleading paths in
	// mflags error messages.
	if os.Args[0] == "/home/weave/weaver" { // matches the Dockerfile ENTRYPOINT
		os.Args[0] = "weave"
		mflag.CommandLine.Init("weave", mflag.ExitOnError)
	}

	mflag.Parse()

	peers = mflag.Args()
	if resume && len(peers) > 0 {
		Log.Fatalf("You must not specify an initial peer list in conjunction with --resume")
	}

	common.SetLogLevel(logLevel)

	if justVersion {
		fmt.Printf("weave router %s\n", version)
		os.Exit(0)
	}

	Log.Println("Command line options:", options())

	if prof != "" {
		defer profile.Start(profile.CPUProfile, profile.ProfilePath(prof), profile.NoShutdownHook).Stop()
	}

	if protocolMinVersion < mesh.ProtocolMinVersion || protocolMinVersion > mesh.ProtocolMaxVersion {
		Log.Fatalf("--min-protocol-version must be in range [%d,%d]", mesh.ProtocolMinVersion, mesh.ProtocolMaxVersion)
	}
	config.ProtocolMinVersion = byte(protocolMinVersion)

	if pktdebug {
		networkConfig.PacketLogging = packetLogging{}
	} else {
		networkConfig.PacketLogging = nopPacketLogging{}
	}

	overlay, bridge := createOverlay(datapathName, ifaceName, isAWSVPC, config.Host, config.Port, bufSzMB)
	networkConfig.Bridge = bridge

	name := peerName(routerName, bridge.Interface())

	if nickName == "" {
		var err error
		nickName, err = os.Hostname()
		checkFatal(err)
	}

	config.Password = determinePassword(password)
	config.TrustedSubnets = parseTrustedSubnets(trustedSubnetStr)
	config.PeerDiscovery = !noDiscovery

	if isAWSVPC && len(config.Password) > 0 {
		Log.Fatalf("--awsvpc mode is not compatible with the --password option")
	}

//.........这里部分代码省略.........
		checkFatal(err)
	}

	if password == "" {
		password = os.Getenv("WEAVE_PASSWORD")
	}

	if password == "" {
		Log.Println("Communication between peers is unencrypted.")
	} else {
		config.Password = []byte(password)
		Log.Println("Communication between peers via untrusted networks is encrypted.")
	}

	if routerName == "" {
		if iface == nil {
			Log.Fatal("Either an interface must be specified with --iface or a name with -name")
		}
		routerName = iface.HardwareAddr.String()
	}

	name, err := mesh.PeerNameFromUserInput(routerName)
	checkFatal(err)

	if nickName == "" {
		nickName, err = os.Hostname()
		checkFatal(err)
	}

	if prof != "" {
		p := *profile.CPUProfile
		p.ProfilePath = prof
		p.NoShutdownHook = true
		defer profile.Start(&p).Stop()
	}

	config.PeerDiscovery = !noDiscovery

	if pktdebug {
		networkConfig.PacketLogging = packetLogging{}
	} else {
		networkConfig.PacketLogging = nopPacketLogging{}
	}

	if config.TrustedSubnets, err = parseTrustedSubnets(trustedSubnetStr); err != nil {
		Log.Fatal("Unable to parse trusted subnets: ", err)
	}

	router := weave.NewNetworkRouter(config, networkConfig, name, nickName, overlays)
	Log.Println("Our name is", router.Ourself)

	var dockerCli *docker.Client
	if dockerAPI != "" {
		dc, err := docker.NewClient(dockerAPI)
		if err != nil {
			Log.Fatal("Unable to start docker client: ", err)
		} else {
			Log.Info(dc.Info())
		}
		dockerCli = dc
	}
	observeContainers := func(o docker.ContainerObserver) {
		if dockerCli != nil {
			if err = dockerCli.AddObserver(o); err != nil {
				Log.Fatal("Unable to start watcher", err)
			}