本文整理汇总了Golang中github.com/wallyworld/core/environs/config.Config.Name方法的典型用法代码示例。如果您正苦于以下问题:Golang Config.Name方法的具体用法?Golang Config.Name怎么用?Golang Config.Name使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类github.com/wallyworld/core/environs/config.Config
的用法示例。
在下文中一共展示了Config.Name方法的7个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。
示例1: prepare
// prepare is the internal version of Prepare - it prepares the
// environment but does not open it.
func (p *environProvider) prepare(cfg *config.Config) (*config.Config, error) {
ecfg, err := p.newConfig(cfg)
if err != nil {
return nil, err
}
p.mu.Lock()
defer p.mu.Unlock()
name := cfg.Name()
if ecfg.stateId() != noStateId {
return cfg, nil
}
// The environment has not been prepared,
// so create it and set its state identifier accordingly.
if ecfg.stateServer() && len(p.state) != 0 {
for _, old := range p.state {
panic(fmt.Errorf("cannot share a state between two dummy environs; old %q; new %q", old.name, name))
}
}
state := newState(name, p.ops, p.statePolicy)
p.maxStateId++
state.id = p.maxStateId
p.state[state.id] = state
// Add the state id to the configuration we use to
// in the returned environment.
return cfg.Apply(map[string]interface{}{
"state-id": fmt.Sprint(state.id),
})
}
示例2: Open
func (maasEnvironProvider) Open(cfg *config.Config) (environs.Environ, error) {
logger.Debugf("opening environment %q.", cfg.Name())
env, err := NewEnviron(cfg)
if err != nil {
return nil, err
}
return env, nil
}
示例3: Initialize
// Initialize sets up an initial empty state and returns it.
// This needs to be performed only once for a given environment.
// It returns unauthorizedError if access is unauthorized.
func Initialize(info *Info, cfg *config.Config, opts DialOpts, policy Policy) (rst *State, err error) {
st, err := Open(info, opts, policy)
if err != nil {
return nil, err
}
defer func() {
if err != nil {
st.Close()
}
}()
// A valid environment is used as a signal that the
// state has already been initalized. If this is the case
// do nothing.
if _, err := st.Environment(); err == nil {
return st, nil
} else if !errors.IsNotFound(err) {
return nil, err
}
logger.Infof("initializing environment")
if err := checkEnvironConfig(cfg); err != nil {
return nil, err
}
uuid, err := utils.NewUUID()
if err != nil {
return nil, fmt.Errorf("environment UUID cannot be created: %v", err)
}
ops := []txn.Op{
createConstraintsOp(st, environGlobalKey, constraints.Value{}),
createSettingsOp(st, environGlobalKey, cfg.AllAttrs()),
createEnvironmentOp(st, cfg.Name(), uuid.String()),
{
C: st.stateServers.Name,
Id: environGlobalKey,
Insert: &stateServersDoc{},
}, {
C: st.stateServers.Name,
Id: apiHostPortsKey,
Insert: &apiHostPortsDoc{},
},
}
if err := st.runTransaction(ops); err == txn.ErrAborted {
// The config was created in the meantime.
return st, nil
} else if err != nil {
return nil, err
}
return st, nil
}
示例4: newEnviron
// newEnviron create a new Joyent environ instance from config.
func newEnviron(cfg *config.Config) (*joyentEnviron, error) {
env := new(joyentEnviron)
if err := env.SetConfig(cfg); err != nil {
return nil, err
}
env.name = cfg.Name()
var err error
env.storage, err = newStorage(env.ecfg, "")
if err != nil {
return nil, err
}
env.compute, err = newCompute(env.ecfg)
if err != nil {
return nil, err
}
return env, nil
}
示例5: ensureCertificate
// ensureCertificate generates a new CA certificate and
// attaches it to the given environment configuration,
// unless the configuration already has one.
func ensureCertificate(cfg *config.Config) (*config.Config, error) {
_, hasCACert := cfg.CACert()
_, hasCAKey := cfg.CAPrivateKey()
if hasCACert && hasCAKey {
return cfg, nil
}
if hasCACert && !hasCAKey {
return nil, fmt.Errorf("environment configuration with a certificate but no CA private key")
}
caCert, caKey, err := cert.NewCA(cfg.Name(), time.Now().UTC().AddDate(10, 0, 0))
if err != nil {
return nil, err
}
return cfg.Apply(map[string]interface{}{
"ca-cert": string(caCert),
"ca-private-key": string(caKey),
})
}
示例6: Prepare
// Prepare prepares a new environment based on the provided configuration.
// If the environment is already prepared, it behaves like New.
func Prepare(cfg *config.Config, ctx BootstrapContext, store configstore.Storage) (Environ, error) {
p, err := Provider(cfg.Type())
if err != nil {
return nil, err
}
info, err := store.CreateInfo(cfg.Name())
if err == configstore.ErrEnvironInfoAlreadyExists {
logger.Infof("environment info already exists; using New not Prepare")
info, err := store.ReadInfo(cfg.Name())
if err != nil {
return nil, fmt.Errorf("error reading environment info %q: %v", cfg.Name(), err)
}
if !info.Initialized() {
return nil, fmt.Errorf("found uninitialized environment info for %q; environment preparation probably in progress or interrupted", cfg.Name())
}
if len(info.BootstrapConfig()) == 0 {
return nil, fmt.Errorf("found environment info but no bootstrap config")
}
cfg, err = config.New(config.NoDefaults, info.BootstrapConfig())
if err != nil {
return nil, fmt.Errorf("cannot parse bootstrap config: %v", err)
}
return New(cfg)
}
if err != nil {
return nil, fmt.Errorf("cannot create new info for environment %q: %v", cfg.Name(), err)
}
env, err := prepare(ctx, cfg, info, p)
if err != nil {
if err := info.Destroy(); err != nil {
logger.Warningf("cannot destroy newly created environment info: %v", err)
}
return nil, err
}
info.SetBootstrapConfig(env.Config().AllAttrs())
if err := info.Write(); err != nil {
return nil, fmt.Errorf("cannot create environment info %q: %v", env.Config().Name(), err)
}
return env, nil
}
示例7: Validate
// Validate implements environs.EnvironProvider.Validate.
func (provider environProvider) Validate(cfg, old *config.Config) (valid *config.Config, err error) {
// Check for valid changes for the base config values.
if err := config.Validate(cfg, old); err != nil {
return nil, err
}
validated, err := cfg.ValidateUnknownAttrs(configFields, configDefaults)
if err != nil {
return nil, fmt.Errorf("failed to validate unknown attrs: %v", err)
}
localConfig := newEnvironConfig(cfg, validated)
// Before potentially creating directories, make sure that the
// root directory has not changed.
containerType := localConfig.container()
if old != nil {
oldLocalConfig, err := provider.newConfig(old)
if err != nil {
return nil, fmt.Errorf("old config is not a valid local config: %v", old)
}
if containerType != oldLocalConfig.container() {
return nil, fmt.Errorf("cannot change container from %q to %q",
oldLocalConfig.container(), containerType)
}
if localConfig.rootDir() != oldLocalConfig.rootDir() {
return nil, fmt.Errorf("cannot change root-dir from %q to %q",
oldLocalConfig.rootDir(),
localConfig.rootDir())
}
if localConfig.networkBridge() != oldLocalConfig.networkBridge() {
return nil, fmt.Errorf("cannot change network-bridge from %q to %q",
oldLocalConfig.rootDir(),
localConfig.rootDir())
}
if localConfig.storagePort() != oldLocalConfig.storagePort() {
return nil, fmt.Errorf("cannot change storage-port from %v to %v",
oldLocalConfig.storagePort(),
localConfig.storagePort())
}
}
// Currently only supported containers are "lxc" and "kvm".
if containerType != instance.LXC && containerType != instance.KVM {
return nil, fmt.Errorf("unsupported container type: %q", containerType)
}
dir, err := utils.NormalizePath(localConfig.rootDir())
if err != nil {
return nil, err
}
if dir == "." {
dir = osenv.JujuHomePath(cfg.Name())
}
// Always assign the normalized path.
localConfig.attrs["root-dir"] = dir
if containerType != instance.KVM {
fastOptionAvailable := useFastLXC(containerType)
if _, found := localConfig.attrs["lxc-clone"]; !found {
localConfig.attrs["lxc-clone"] = fastOptionAvailable
}
}
// Apply the coerced unknown values back into the config.
return cfg.Apply(localConfig.attrs)
}