本文整理汇总了Golang中github.com/vtolstov/gopacket.PacketBuilder类的典型用法代码示例。如果您正苦于以下问题：Golang PacketBuilder类的具体用法？Golang PacketBuilder怎么用？Golang PacketBuilder使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
在下文中一共展示了PacketBuilder类的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Golang代码示例。
示例1: decodeSCTPEmptyLayer
func decodeSCTPEmptyLayer(data []byte, p gopacket.PacketBuilder) error {
sc := &SCTPEmptyLayer{
SCTPChunk: decodeSCTPChunk(data),
}
p.AddLayer(sc)
return p.NextDecoder(gopacket.DecodeFunc(decodeWithSCTPChunkTypePrefix))
}示例2: decodeSCTPCookieEcho
func decodeSCTPCookieEcho(data []byte, p gopacket.PacketBuilder) error {
sc := &SCTPCookieEcho{
SCTPChunk: decodeSCTPChunk(data),
}
sc.Cookie = data[4:sc.Length]
p.AddLayer(sc)
return p.NextDecoder(gopacket.DecodeFunc(decodeWithSCTPChunkTypePrefix))
}示例3: decodeSCTPShutdown
func decodeSCTPShutdown(data []byte, p gopacket.PacketBuilder) error {
sc := &SCTPShutdown{
SCTPChunk: decodeSCTPChunk(data),
CumulativeTSNAck: binary.BigEndian.Uint32(data[4:8]),
}
p.AddLayer(sc)
return p.NextDecoder(gopacket.DecodeFunc(decodeWithSCTPChunkTypePrefix))
}示例4: decodeICMPv4
func decodeICMPv4(data []byte, p gopacket.PacketBuilder) error {
i := &ICMPv4{}
err := i.DecodeFromBytes(data, p)
if err != nil {
return err
}
p.AddLayer(i)
return p.NextDecoder(gopacket.LayerTypePayload)
}示例5: decodeIPv6HopByHop
func decodeIPv6HopByHop(data []byte, p gopacket.PacketBuilder) error {
i := &IPv6HopByHop{}
err := i.DecodeFromBytes(data, p)
p.AddLayer(i)
if err != nil {
return err
}
return p.NextDecoder(i.NextHeader)
}示例6: decodeDHCPv4
func decodeDHCPv4(data []byte, p gopacket.PacketBuilder) error {
dhcp := &DHCPv4{}
err := dhcp.DecodeFromBytes(data, p)
if err != nil {
return err
}
p.AddLayer(dhcp)
return p.NextDecoder(gopacket.LayerTypePayload)
}示例7: decodeIPSecESP
func decodeIPSecESP(data []byte, p gopacket.PacketBuilder) error {
i := &IPSecESP{
BaseLayer: BaseLayer{data, nil},
SPI: binary.BigEndian.Uint32(data[:4]),
Seq: binary.BigEndian.Uint32(data[4:8]),
Encrypted: data[8:],
}
p.AddLayer(i)
return nil
}示例8: decodeDNS
// decodeDNS decodes the byte slice into a DNS type. It also
// setups the application Layer in PacketBuilder.
func decodeDNS(data []byte, p gopacket.PacketBuilder) error {
d := &DNS{}
err := d.DecodeFromBytes(data, p)
if err != nil {
return err
}
p.AddLayer(d)
p.SetApplicationLayer(d)
return nil
}示例9: decodeEthernetCTP
func decodeEthernetCTP(data []byte, p gopacket.PacketBuilder) error {
c := &EthernetCTP{
SkipCount: binary.LittleEndian.Uint16(data[:2]),
BaseLayer: BaseLayer{data[:2], data[2:]},
}
if c.SkipCount%2 != 0 {
return fmt.Errorf("EthernetCTP skip count is odd: %d", c.SkipCount)
}
p.AddLayer(c)
return p.NextDecoder(gopacket.DecodeFunc(decodeEthernetCTPFromFunctionType))
}示例10: decodeSNAP
func decodeSNAP(data []byte, p gopacket.PacketBuilder) error {
s := &SNAP{
OrganizationalCode: data[:3],
Type: EthernetType(binary.BigEndian.Uint16(data[3:5])),
BaseLayer: BaseLayer{data[:5], data[5:]},
}
p.AddLayer(s)
// BUG(gconnell): When decoding SNAP, we treat the SNAP type as an Ethernet
// type. This may not actually be an ethernet type in all cases,
// depending on the organizational code. Right now, we don't check.
return p.NextDecoder(s.Type)
}示例11: decodingLayerDecoder
func decodingLayerDecoder(d layerDecodingLayer, data []byte, p gopacket.PacketBuilder) error {
err := d.DecodeFromBytes(data, p)
if err != nil {
return err
}
p.AddLayer(d)
next := d.NextLayerType()
if next == gopacket.LayerTypeZero {
return nil
}
return p.NextDecoder(next)
}示例12: decodePPPoE
// decodePPPoE decodes the PPPoE header (see http://tools.ietf.org/html/rfc2516).
func decodePPPoE(data []byte, p gopacket.PacketBuilder) error {
pppoe := &PPPoE{
Version: data[0] >> 4,
Type: data[0] & 0x0F,
Code: PPPoECode(data[1]),
SessionId: binary.BigEndian.Uint16(data[2:4]),
Length: binary.BigEndian.Uint16(data[4:6]),
}
pppoe.BaseLayer = BaseLayer{data[:6], data[6 : 6+pppoe.Length]}
p.AddLayer(pppoe)
return p.NextDecoder(pppoe.Code)
}示例13: decodeIPv6Fragment
func decodeIPv6Fragment(data []byte, p gopacket.PacketBuilder) error {
i := &IPv6Fragment{
BaseLayer: BaseLayer{data[:8], data[8:]},
NextHeader: IPProtocol(data[0]),
Reserved1: data[1],
FragmentOffset: binary.BigEndian.Uint16(data[2:4]) >> 3,
Reserved2: data[3] & 0x6 >> 1,
MoreFragments: data[3]&0x1 != 0,
Identification: binary.BigEndian.Uint32(data[4:8]),
}
p.AddLayer(i)
return p.NextDecoder(gopacket.DecodeFragment)
}示例14: decodeSCTPHeartbeat
func decodeSCTPHeartbeat(data []byte, p gopacket.PacketBuilder) error {
sc := &SCTPHeartbeat{
SCTPChunk: decodeSCTPChunk(data),
}
paramData := data[4:sc.Length]
for len(paramData) > 0 {
p := SCTPHeartbeatParameter(decodeSCTPParameter(paramData))
paramData = paramData[p.ActualLength:]
sc.Parameters = append(sc.Parameters, p)
}
p.AddLayer(sc)
return p.NextDecoder(gopacket.DecodeFunc(decodeWithSCTPChunkTypePrefix))
}示例15: decodeNortelDiscovery
func decodeNortelDiscovery(data []byte, p gopacket.PacketBuilder) error {
c := &NortelDiscovery{}
if len(data) < 11 {
return fmt.Errorf("Invalid NortelDiscovery packet length %d", len(data))
}
c.IPAddress = data[0:4]
c.SegmentID = data[4:7]
c.Chassis = NDPChassisType(data[7])
c.Backplane = NDPBackplaneType(data[8])
c.State = NDPState(data[9])
c.NumLinks = uint8(data[10])
p.AddLayer(c)
return nil
}