本文整理汇总了Golang中github.com/v2ray/v2ray-core/proxy/socks/protocol.NewSocks5Response函数的典型用法代码示例。如果您正苦于以下问题:Golang NewSocks5Response函数的具体用法?Golang NewSocks5Response怎么用?Golang NewSocks5Response使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了NewSocks5Response函数的9个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。
示例1: handleUDP
func (server *SocksServer) handleUDP(reader *v2net.TimeOutReader, writer io.Writer) error {
response := protocol.NewSocks5Response()
response.Error = protocol.ErrorSuccess
udpAddr := server.getUDPAddr()
response.Port = udpAddr.Port()
switch {
case udpAddr.IsIPv4():
response.AddrType = protocol.AddrTypeIPv4
copy(response.IPv4[:], udpAddr.IP())
case udpAddr.IsIPv6():
response.AddrType = protocol.AddrTypeIPv6
copy(response.IPv6[:], udpAddr.IP())
case udpAddr.IsDomain():
response.AddrType = protocol.AddrTypeDomain
response.Domain = udpAddr.Domain()
}
err := protocol.WriteResponse(writer, response)
if err != nil {
log.Error("Socks failed to write response: %v", err)
return err
}
reader.SetTimeOut(300) /* 5 minutes */
buffer := make([]byte, 1024)
reader.Read(buffer)
return nil
}
示例2: handleUDP
func (server *SocksServer) handleUDP(reader *v2net.TimeOutReader, writer io.Writer) error {
response := protocol.NewSocks5Response()
response.Error = protocol.ErrorSuccess
udpAddr := server.getUDPAddr()
response.Port = udpAddr.Port()
switch {
case udpAddr.IsIPv4():
response.SetIPv4(udpAddr.IP())
case udpAddr.IsIPv6():
response.SetIPv6(udpAddr.IP())
case udpAddr.IsDomain():
response.SetDomain(udpAddr.Domain())
}
responseBuffer := alloc.NewSmallBuffer().Clear()
response.Write(responseBuffer)
_, err := writer.Write(responseBuffer.Value)
responseBuffer.Release()
if err != nil {
log.Error("Socks failed to write response: %v", err)
return err
}
reader.SetTimeOut(300) /* 5 minutes */
v2net.ReadFrom(reader, nil) // Just in case of anything left in the socket
// The TCP connection closes after this method returns. We need to wait until
// the client closes it.
// TODO: get notified from UDP part
<-time.After(5 * time.Minute)
return nil
}
示例3: handleUDP
func (this *SocksServer) handleUDP(reader io.Reader, writer *v2io.BufferedWriter) error {
response := protocol.NewSocks5Response()
response.Error = protocol.ErrorSuccess
udpAddr := this.udpAddress
response.Port = udpAddr.Port()
switch {
case udpAddr.Address().IsIPv4():
response.SetIPv4(udpAddr.Address().IP())
case udpAddr.Address().IsIPv6():
response.SetIPv6(udpAddr.Address().IP())
case udpAddr.Address().IsDomain():
response.SetDomain(udpAddr.Address().Domain())
}
response.Write(writer)
err := writer.Flush()
if err != nil {
log.Error("Socks: failed to write response: ", err)
return err
}
// The TCP connection closes after this method returns. We need to wait until
// the client closes it.
// TODO: get notified from UDP part
<-time.After(5 * time.Minute)
return nil
}
示例4: handleUDP
func (server *SocksServer) handleUDP(reader *v2net.TimeOutReader, writer io.Writer) error {
response := protocol.NewSocks5Response()
response.Error = protocol.ErrorSuccess
udpAddr := server.getUDPAddr()
response.Port = udpAddr.Port()
switch {
case udpAddr.IsIPv4():
response.AddrType = protocol.AddrTypeIPv4
copy(response.IPv4[:], udpAddr.IP())
case udpAddr.IsIPv6():
response.AddrType = protocol.AddrTypeIPv6
copy(response.IPv6[:], udpAddr.IP())
case udpAddr.IsDomain():
response.AddrType = protocol.AddrTypeDomain
response.Domain = udpAddr.Domain()
}
err := protocol.WriteResponse(writer, response)
if err != nil {
log.Error("Socks failed to write response: %v", err)
return err
}
reader.SetTimeOut(300) /* 5 minutes */
v2net.ReadFrom(reader, 1) // Just in case of anything left in the socket
// The TCP connection closes after this method returns. We need to wait until
// the client closes it.
// TODO: get notified from UDP part
<-time.After(5 * time.Minute)
return nil
}
示例5: handleSocks5
func (server *SocksServer) handleSocks5(reader *v2net.TimeOutReader, writer io.Writer, auth protocol.Socks5AuthenticationRequest) error {
expectedAuthMethod := protocol.AuthNotRequired
if server.config.IsPassword() {
expectedAuthMethod = protocol.AuthUserPass
}
if !auth.HasAuthMethod(expectedAuthMethod) {
authResponse := protocol.NewAuthenticationResponse(protocol.AuthNoMatchingMethod)
err := protocol.WriteAuthentication(writer, authResponse)
if err != nil {
log.Error("Socks failed to write authentication: %v", err)
return err
}
log.Warning("Socks client doesn't support allowed any auth methods.")
return UnsupportedAuthMethod
}
authResponse := protocol.NewAuthenticationResponse(expectedAuthMethod)
err := protocol.WriteAuthentication(writer, authResponse)
if err != nil {
log.Error("Socks failed to write authentication: %v", err)
return err
}
if server.config.IsPassword() {
upRequest, err := protocol.ReadUserPassRequest(reader)
if err != nil {
log.Error("Socks failed to read username and password: %v", err)
return err
}
status := byte(0)
if !server.config.HasAccount(upRequest.Username(), upRequest.Password()) {
status = byte(0xFF)
}
upResponse := protocol.NewSocks5UserPassResponse(status)
err = protocol.WriteUserPassResponse(writer, upResponse)
if err != nil {
log.Error("Socks failed to write user pass response: %v", err)
return err
}
if status != byte(0) {
log.Warning("Invalid user account: %s", upRequest.AuthDetail())
return proxyerrors.InvalidAuthentication
}
}
request, err := protocol.ReadRequest(reader)
if err != nil {
log.Error("Socks failed to read request: %v", err)
return err
}
if request.Command == protocol.CmdUdpAssociate && server.config.UDPEnabled {
return server.handleUDP(reader, writer)
}
if request.Command == protocol.CmdBind || request.Command == protocol.CmdUdpAssociate {
response := protocol.NewSocks5Response()
response.Error = protocol.ErrorCommandNotSupported
responseBuffer := alloc.NewSmallBuffer().Clear()
response.Write(responseBuffer)
_, err = writer.Write(responseBuffer.Value)
responseBuffer.Release()
if err != nil {
log.Error("Socks failed to write response: %v", err)
return err
}
log.Warning("Unsupported socks command %d", request.Command)
return UnsupportedSocksCommand
}
response := protocol.NewSocks5Response()
response.Error = protocol.ErrorSuccess
// Some SOCKS software requires a value other than dest. Let's fake one:
response.Port = uint16(1717)
response.AddrType = protocol.AddrTypeIPv4
response.IPv4[0] = 0
response.IPv4[1] = 0
response.IPv4[2] = 0
response.IPv4[3] = 0
responseBuffer := alloc.NewSmallBuffer().Clear()
response.Write(responseBuffer)
_, err = writer.Write(responseBuffer.Value)
responseBuffer.Release()
if err != nil {
log.Error("Socks failed to write response: %v", err)
return err
}
dest := request.Destination()
data, err := v2net.ReadFrom(reader, nil)
if err != nil {
return err
}
packet := v2net.NewPacket(dest, data, true)
server.transport(reader, writer, packet)
return nil
//.........这里部分代码省略.........
示例6: HandleConnection
func (server *SocksServer) HandleConnection(connection net.Conn) error {
defer connection.Close()
reader := connection.(io.Reader)
auth, auth4, err := protocol.ReadAuthentication(reader)
if err != nil && err != protocol.ErrorSocksVersion4 {
log.Error("Error on reading authentication: %v", err)
return err
}
var dest v2net.Destination
// TODO refactor this part
if err == protocol.ErrorSocksVersion4 {
result := protocol.Socks4RequestGranted
if auth4.Command == protocol.CmdBind {
result = protocol.Socks4RequestRejected
}
socks4Response := protocol.NewSocks4AuthenticationResponse(result, auth4.Port, auth4.IP[:])
protocol.WriteSocks4AuthenticationResponse(connection, socks4Response)
if result == protocol.Socks4RequestRejected {
return ErrorCommandNotSupported
}
dest = v2net.NewTCPDestination(v2net.IPAddress(auth4.IP[:], auth4.Port))
} else {
expectedAuthMethod := protocol.AuthNotRequired
if server.config.AuthMethod == JsonAuthMethodUserPass {
expectedAuthMethod = protocol.AuthUserPass
}
if !auth.HasAuthMethod(expectedAuthMethod) {
authResponse := protocol.NewAuthenticationResponse(protocol.AuthNoMatchingMethod)
err = protocol.WriteAuthentication(connection, authResponse)
if err != nil {
log.Error("Error on socksio write authentication: %v", err)
return err
}
log.Warning("Client doesn't support allowed any auth methods.")
return ErrorAuthenticationFailed
}
authResponse := protocol.NewAuthenticationResponse(expectedAuthMethod)
err = protocol.WriteAuthentication(connection, authResponse)
if err != nil {
log.Error("Error on socksio write authentication: %v", err)
return err
}
if server.config.AuthMethod == JsonAuthMethodUserPass {
upRequest, err := protocol.ReadUserPassRequest(reader)
if err != nil {
log.Error("Failed to read username and password: %v", err)
return err
}
status := byte(0)
if !upRequest.IsValid(server.config.Username, server.config.Password) {
status = byte(0xFF)
}
upResponse := protocol.NewSocks5UserPassResponse(status)
err = protocol.WriteUserPassResponse(connection, upResponse)
if err != nil {
log.Error("Error on socksio write user pass response: %v", err)
return err
}
if status != byte(0) {
return ErrorInvalidUser
}
}
request, err := protocol.ReadRequest(reader)
if err != nil {
log.Error("Error on reading socks request: %v", err)
return err
}
response := protocol.NewSocks5Response()
if request.Command == protocol.CmdBind || request.Command == protocol.CmdUdpAssociate {
response := protocol.NewSocks5Response()
response.Error = protocol.ErrorCommandNotSupported
err = protocol.WriteResponse(connection, response)
if err != nil {
log.Error("Error on socksio write response: %v", err)
return err
}
log.Warning("Unsupported socks command %d", request.Command)
return ErrorCommandNotSupported
}
response.Error = protocol.ErrorSuccess
response.Port = request.Port
response.AddrType = request.AddrType
switch response.AddrType {
case protocol.AddrTypeIPv4:
copy(response.IPv4[:], request.IPv4[:])
case protocol.AddrTypeIPv6:
copy(response.IPv6[:], request.IPv6[:])
case protocol.AddrTypeDomain:
//.........这里部分代码省略.........
示例7: handleSocks5
func (this *SocksServer) handleSocks5(reader *v2net.TimeOutReader, writer io.Writer, auth protocol.Socks5AuthenticationRequest) error {
expectedAuthMethod := protocol.AuthNotRequired
if this.config.AuthType == AuthTypePassword {
expectedAuthMethod = protocol.AuthUserPass
}
if !auth.HasAuthMethod(expectedAuthMethod) {
authResponse := protocol.NewAuthenticationResponse(protocol.AuthNoMatchingMethod)
err := protocol.WriteAuthentication(writer, authResponse)
if err != nil {
log.Error("Socks: failed to write authentication: ", err)
return err
}
log.Warning("Socks: client doesn't support allowed any auth methods.")
return ErrorUnsupportedAuthMethod
}
authResponse := protocol.NewAuthenticationResponse(expectedAuthMethod)
err := protocol.WriteAuthentication(writer, authResponse)
if err != nil {
log.Error("Socks: failed to write authentication: ", err)
return err
}
if this.config.AuthType == AuthTypePassword {
upRequest, err := protocol.ReadUserPassRequest(reader)
if err != nil {
log.Error("Socks: failed to read username and password: ", err)
return err
}
status := byte(0)
if !this.config.HasAccount(upRequest.Username(), upRequest.Password()) {
status = byte(0xFF)
}
upResponse := protocol.NewSocks5UserPassResponse(status)
err = protocol.WriteUserPassResponse(writer, upResponse)
if err != nil {
log.Error("Socks: failed to write user pass response: ", err)
return err
}
if status != byte(0) {
log.Warning("Socks: Invalid user account: ", upRequest.AuthDetail())
return proxy.ErrorInvalidAuthentication
}
}
request, err := protocol.ReadRequest(reader)
if err != nil {
log.Error("Socks: failed to read request: ", err)
return err
}
if request.Command == protocol.CmdUdpAssociate && this.config.UDPEnabled {
return this.handleUDP(reader, writer)
}
if request.Command == protocol.CmdBind || request.Command == protocol.CmdUdpAssociate {
response := protocol.NewSocks5Response()
response.Error = protocol.ErrorCommandNotSupported
response.Port = v2net.Port(0)
response.SetIPv4([]byte{0, 0, 0, 0})
responseBuffer := alloc.NewSmallBuffer().Clear()
response.Write(responseBuffer)
_, err = writer.Write(responseBuffer.Value)
responseBuffer.Release()
if err != nil {
log.Error("Socks: failed to write response: ", err)
return err
}
log.Warning("Socks: Unsupported socks command ", request.Command)
return ErrorUnsupportedSocksCommand
}
response := protocol.NewSocks5Response()
response.Error = protocol.ErrorSuccess
// Some SOCKS software requires a value other than dest. Let's fake one:
response.Port = v2net.Port(1717)
response.SetIPv4([]byte{0, 0, 0, 0})
responseBuffer := alloc.NewSmallBuffer().Clear()
response.Write(responseBuffer)
_, err = writer.Write(responseBuffer.Value)
responseBuffer.Release()
if err != nil {
log.Error("Socks: failed to write response: ", err)
return err
}
dest := request.Destination()
log.Info("Socks: TCP Connect request to ", dest)
packet := v2net.NewPacket(dest, nil, true)
this.transport(reader, writer, packet)
return nil
}
示例8: handleSocks5
func (server *SocksServer) handleSocks5(reader *v2net.TimeOutReader, writer io.Writer, auth protocol.Socks5AuthenticationRequest) error {
expectedAuthMethod := protocol.AuthNotRequired
if server.config.IsPassword() {
expectedAuthMethod = protocol.AuthUserPass
}
if !auth.HasAuthMethod(expectedAuthMethod) {
authResponse := protocol.NewAuthenticationResponse(protocol.AuthNoMatchingMethod)
err := protocol.WriteAuthentication(writer, authResponse)
if err != nil {
log.Error("Socks failed to write authentication: %v", err)
return err
}
log.Warning("Socks client doesn't support allowed any auth methods.")
return errors.NewInvalidOperationError("Unsupported auth methods.")
}
authResponse := protocol.NewAuthenticationResponse(expectedAuthMethod)
err := protocol.WriteAuthentication(writer, authResponse)
if err != nil {
log.Error("Socks failed to write authentication: %v", err)
return err
}
if server.config.IsPassword() {
upRequest, err := protocol.ReadUserPassRequest(reader)
if err != nil {
log.Error("Socks failed to read username and password: %v", err)
return err
}
status := byte(0)
if !upRequest.IsValid(server.config.Username, server.config.Password) {
status = byte(0xFF)
}
upResponse := protocol.NewSocks5UserPassResponse(status)
err = protocol.WriteUserPassResponse(writer, upResponse)
if err != nil {
log.Error("Socks failed to write user pass response: %v", err)
return err
}
if status != byte(0) {
err = errors.NewAuthenticationError(upRequest.AuthDetail())
log.Warning(err.Error())
return err
}
}
request, err := protocol.ReadRequest(reader)
if err != nil {
log.Error("Socks failed to read request: %v", err)
return err
}
response := protocol.NewSocks5Response()
if request.Command == protocol.CmdUdpAssociate && server.config.UDPEnabled {
return server.handleUDP(reader, writer)
}
if request.Command == protocol.CmdBind || request.Command == protocol.CmdUdpAssociate {
response := protocol.NewSocks5Response()
response.Error = protocol.ErrorCommandNotSupported
err = protocol.WriteResponse(writer, response)
if err != nil {
log.Error("Socks failed to write response: %v", err)
return err
}
log.Warning("Unsupported socks command %d", request.Command)
return errors.NewInvalidOperationError("Socks command " + strconv.Itoa(int(request.Command)))
}
response.Error = protocol.ErrorSuccess
response.Port = request.Port
response.AddrType = request.AddrType
switch response.AddrType {
case protocol.AddrTypeIPv4:
copy(response.IPv4[:], request.IPv4[:])
case protocol.AddrTypeIPv6:
copy(response.IPv6[:], request.IPv6[:])
case protocol.AddrTypeDomain:
response.Domain = request.Domain
}
err = protocol.WriteResponse(writer, response)
if err != nil {
log.Error("Socks failed to write response: %v", err)
return err
}
dest := request.Destination()
data, err := v2net.ReadFrom(reader)
if err != nil {
return err
}
packet := v2net.NewPacket(dest, data, true)
server.transport(reader, writer, packet)
return nil
}
示例9: HandleConnection
func (server *SocksServer) HandleConnection(connection net.Conn) error {
defer connection.Close()
reader := v2net.NewTimeOutReader(4, connection)
auth, auth4, err := protocol.ReadAuthentication(reader)
if err != nil && !errors.HasCode(err, 1000) {
log.Error("Socks failed to read authentication: %v", err)
return err
}
var dest v2net.Destination
// TODO refactor this part
if errors.HasCode(err, 1000) {
result := protocol.Socks4RequestGranted
if auth4.Command == protocol.CmdBind {
result = protocol.Socks4RequestRejected
}
socks4Response := protocol.NewSocks4AuthenticationResponse(result, auth4.Port, auth4.IP[:])
connection.Write(socks4Response.ToBytes(nil))
if result == protocol.Socks4RequestRejected {
return errors.NewInvalidOperationError("Socks4 command " + strconv.Itoa(int(auth4.Command)))
}
dest = v2net.NewTCPDestination(v2net.IPAddress(auth4.IP[:], auth4.Port))
} else {
expectedAuthMethod := protocol.AuthNotRequired
if server.config.IsPassword() {
expectedAuthMethod = protocol.AuthUserPass
}
if !auth.HasAuthMethod(expectedAuthMethod) {
authResponse := protocol.NewAuthenticationResponse(protocol.AuthNoMatchingMethod)
err = protocol.WriteAuthentication(connection, authResponse)
if err != nil {
log.Error("Socks failed to write authentication: %v", err)
return err
}
log.Warning("Socks client doesn't support allowed any auth methods.")
return errors.NewInvalidOperationError("Unsupported auth methods.")
}
authResponse := protocol.NewAuthenticationResponse(expectedAuthMethod)
err = protocol.WriteAuthentication(connection, authResponse)
if err != nil {
log.Error("Socks failed to write authentication: %v", err)
return err
}
if server.config.IsPassword() {
upRequest, err := protocol.ReadUserPassRequest(reader)
if err != nil {
log.Error("Socks failed to read username and password: %v", err)
return err
}
status := byte(0)
if !upRequest.IsValid(server.config.Username, server.config.Password) {
status = byte(0xFF)
}
upResponse := protocol.NewSocks5UserPassResponse(status)
err = protocol.WriteUserPassResponse(connection, upResponse)
if err != nil {
log.Error("Socks failed to write user pass response: %v", err)
return err
}
if status != byte(0) {
err = errors.NewAuthenticationError(upRequest.AuthDetail())
log.Warning(err.Error())
return err
}
}
request, err := protocol.ReadRequest(reader)
if err != nil {
log.Error("Socks failed to read request: %v", err)
return err
}
response := protocol.NewSocks5Response()
if request.Command == protocol.CmdBind || request.Command == protocol.CmdUdpAssociate {
response := protocol.NewSocks5Response()
response.Error = protocol.ErrorCommandNotSupported
err = protocol.WriteResponse(connection, response)
if err != nil {
log.Error("Socks failed to write response: %v", err)
return err
}
log.Warning("Unsupported socks command %d", request.Command)
return errors.NewInvalidOperationError("Socks command " + strconv.Itoa(int(request.Command)))
}
response.Error = protocol.ErrorSuccess
response.Port = request.Port
response.AddrType = request.AddrType
switch response.AddrType {
case protocol.AddrTypeIPv4:
copy(response.IPv4[:], request.IPv4[:])
case protocol.AddrTypeIPv6:
//.........这里部分代码省略.........