Golang osutil.MaximizeOpenFileLimit函数代码示例

func main() {
	log.SetFlags(log.Lshortfile | log.LstdFlags)

	var dir, extAddress, proto string

	flag.StringVar(&listen, "listen", ":22067", "Protocol listen address")
	flag.StringVar(&dir, "keys", ".", "Directory where cert.pem and key.pem is stored")
	flag.DurationVar(&networkTimeout, "network-timeout", networkTimeout, "Timeout for network operations between the client and the relay.\n\tIf no data is received between the client and the relay in this period of time, the connection is terminated.\n\tFurthermore, if no data is sent between either clients being relayed within this period of time, the session is also terminated.")
	flag.DurationVar(&pingInterval, "ping-interval", pingInterval, "How often pings are sent")
	flag.DurationVar(&messageTimeout, "message-timeout", messageTimeout, "Maximum amount of time we wait for relevant messages to arrive")
	flag.IntVar(&sessionLimitBps, "per-session-rate", sessionLimitBps, "Per session rate limit, in bytes/s")
	flag.IntVar(&globalLimitBps, "global-rate", globalLimitBps, "Global rate limit, in bytes/s")
	flag.BoolVar(&debug, "debug", debug, "Enable debug output")
	flag.StringVar(&statusAddr, "status-srv", ":22070", "Listen address for status service (blank to disable)")
	flag.StringVar(&poolAddrs, "pools", defaultPoolAddrs, "Comma separated list of relay pool addresses to join")
	flag.StringVar(&providedBy, "provided-by", "", "An optional description about who provides the relay")
	flag.StringVar(&extAddress, "ext-address", "", "An optional address to advertise as being available on.\n\tAllows listening on an unprivileged port with port forwarding from e.g. 443, and be connected to on port 443.")
	flag.StringVar(&proto, "protocol", "tcp", "Protocol used for listening. 'tcp' for IPv4 and IPv6, 'tcp4' for IPv4, 'tcp6' for IPv6")
	flag.BoolVar(&natEnabled, "nat", false, "Use UPnP/NAT-PMP to acquire external port mapping")
	flag.IntVar(&natLease, "nat-lease", 60, "NAT lease length in minutes")
	flag.IntVar(&natRenewal, "nat-renewal", 30, "NAT renewal frequency in minutes")
	flag.IntVar(&natTimeout, "nat-timeout", 10, "NAT discovery timeout in seconds")
	flag.Parse()

	if extAddress == "" {
		extAddress = listen
	}

	if len(providedBy) > 30 {
		log.Fatal("Provided-by cannot be longer than 30 characters")
	}

	addr, err := net.ResolveTCPAddr(proto, extAddress)
	if err != nil {
		log.Fatal(err)
	}

	laddr, err := net.ResolveTCPAddr(proto, listen)
	if err != nil {
		log.Fatal(err)
	}
	if laddr.IP != nil && !laddr.IP.IsUnspecified() {
		laddr.Port = 0
		transport, ok := http.DefaultTransport.(*http.Transport)
		if ok {
			transport.Dial = (&net.Dialer{
				Timeout:   30 * time.Second,
				LocalAddr: laddr,
			}).Dial
		}
	}

	log.Println(LongVersion)

	maxDescriptors, err := osutil.MaximizeOpenFileLimit()
	if maxDescriptors > 0 {
		// Assume that 20% of FD's are leaked/unaccounted for.
		descriptorLimit = int64(maxDescriptors*80) / 100
		log.Println("Connection limit", descriptorLimit)

		go monitorLimits()
	} else if err != nil && runtime.GOOS != "windows" {
		log.Println("Assuming no connection limit, due to error retrieving rlimits:", err)
	}

	sessionAddress = addr.IP[:]
	sessionPort = uint16(addr.Port)

	certFile, keyFile := filepath.Join(dir, "cert.pem"), filepath.Join(dir, "key.pem")
	cert, err := tls.LoadX509KeyPair(certFile, keyFile)
	if err != nil {
		log.Println("Failed to load keypair. Generating one, this might take a while...")
		cert, err = tlsutil.NewCertificate(certFile, keyFile, "strelaysrv", 3072)
		if err != nil {
			log.Fatalln("Failed to generate X509 key pair:", err)
		}
	}

	tlsCfg := &tls.Config{
		Certificates:           []tls.Certificate{cert},
		NextProtos:             []string{protocol.ProtocolName},
		ClientAuth:             tls.RequestClientCert,
		SessionTicketsDisabled: true,
		InsecureSkipVerify:     true,
		MinVersion:             tls.VersionTLS12,
		CipherSuites: []uint16{
			tls.TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,
			tls.TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,
			tls.TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,
			tls.TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,
			tls.TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,
			tls.TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,
		},
	}

	id := syncthingprotocol.NewDeviceID(cert.Certificate[0])
	if debug {
		log.Println("ID:", id)
	}

//.........这里部分代码省略.........

func syncthingMain() {
	// Create a main service manager. We'll add things to this as we go along.
	// We want any logging it does to go through our log system.
	mainSvc := suture.New("main", suture.Spec{
		Log: func(line string) {
			l.Debugln(line)
		},
	})
	mainSvc.ServeBackground()

	// Set a log prefix similar to the ID we will have later on, or early log
	// lines look ugly.
	l.SetPrefix("[start] ")

	if auditEnabled {
		startAuditing(mainSvc)
	}

	if verbose {
		mainSvc.Add(newVerboseSvc())
	}

	errors := logger.NewRecorder(l, logger.LevelWarn, maxSystemErrors, 0)
	systemLog := logger.NewRecorder(l, logger.LevelDebug, maxSystemLog, initialSystemLog)

	// Event subscription for the API; must start early to catch the early events.
	apiSub := events.NewBufferedSubscription(events.Default.Subscribe(events.AllEvents), 1000)

	if len(os.Getenv("GOMAXPROCS")) == 0 {
		runtime.GOMAXPROCS(runtime.NumCPU())
	}

	// Attempt to increase the limit on number of open files to the maximum
	// allowed, in case we have many peers. We don't really care enough to
	// report the error if there is one.
	osutil.MaximizeOpenFileLimit()

	// Ensure that that we have a certificate and key.
	cert, err := tls.LoadX509KeyPair(locations[locCertFile], locations[locKeyFile])
	if err != nil {
		l.Infof("Generating RSA key and certificate for %s...", tlsDefaultCommonName)
		cert, err = tlsutil.NewCertificate(locations[locCertFile], locations[locKeyFile], tlsDefaultCommonName, tlsRSABits)
		if err != nil {
			l.Fatalln(err)
		}
	}

	// We reinitialize the predictable RNG with our device ID, to get a
	// sequence that is always the same but unique to this syncthing instance.
	predictableRandom.Seed(seedFromBytes(cert.Certificate[0]))

	myID = protocol.NewDeviceID(cert.Certificate[0])
	l.SetPrefix(fmt.Sprintf("[%s] ", myID.String()[:5]))

	l.Infoln(LongVersion)
	l.Infoln("My ID:", myID)

	// Emit the Starting event, now that we know who we are.

	events.Default.Log(events.Starting, map[string]string{
		"home": baseDirs["config"],
		"myID": myID.String(),
	})

	// Prepare to be able to save configuration

	cfgFile := locations[locConfigFile]

	// Load the configuration file, if it exists.
	// If it does not, create a template.

	cfg, myName, err := loadConfig(cfgFile)
	if err != nil {
		if os.IsNotExist(err) {
			l.Infoln("No config file; starting with empty defaults")
			myName, _ = os.Hostname()
			newCfg := defaultConfig(myName)
			cfg = config.Wrap(cfgFile, newCfg)
			cfg.Save()
			l.Infof("Edit %s to taste or use the GUI\n", cfgFile)
		} else {
			l.Fatalln("Loading config:", err)
		}
	}

	if cfg.Raw().OriginalVersion != config.CurrentVersion {
		l.Infoln("Archiving a copy of old config file format")
		// Archive a copy
		osutil.Rename(cfgFile, cfgFile+fmt.Sprintf(".v%d", cfg.Raw().OriginalVersion))
		// Save the new version
		cfg.Save()
	}

	if err := checkShortIDs(cfg); err != nil {
		l.Fatalln("Short device IDs are in conflict. Unlucky!\n  Regenerate the device ID of one if the following:\n  ", err)
	}

	if len(profiler) > 0 {
		go func() {
			l.Debugln("Starting profiler on", profiler)
//.........这里部分代码省略.........

func main() {
	log.SetFlags(log.Lshortfile | log.LstdFlags)

	var dir, extAddress string

	flag.StringVar(&listen, "listen", ":22067", "Protocol listen address")
	flag.StringVar(&dir, "keys", ".", "Directory where cert.pem and key.pem is stored")
	flag.DurationVar(&networkTimeout, "network-timeout", networkTimeout, "Timeout for network operations between the client and the relay.\n\tIf no data is received between the client and the relay in this period of time, the connection is terminated.\n\tFurthermore, if no data is sent between either clients being relayed within this period of time, the session is also terminated.")
	flag.DurationVar(&pingInterval, "ping-interval", pingInterval, "How often pings are sent")
	flag.DurationVar(&messageTimeout, "message-timeout", messageTimeout, "Maximum amount of time we wait for relevant messages to arrive")
	flag.IntVar(&sessionLimitBps, "per-session-rate", sessionLimitBps, "Per session rate limit, in bytes/s")
	flag.IntVar(&globalLimitBps, "global-rate", globalLimitBps, "Global rate limit, in bytes/s")
	flag.BoolVar(&debug, "debug", debug, "Enable debug output")
	flag.StringVar(&statusAddr, "status-srv", ":22070", "Listen address for status service (blank to disable)")
	flag.StringVar(&poolAddrs, "pools", defaultPoolAddrs, "Comma separated list of relay pool addresses to join")
	flag.StringVar(&providedBy, "provided-by", "", "An optional description about who provides the relay")
	flag.StringVar(&extAddress, "ext-address", "", "An optional address to advertising as being available on.\n\tAllows listening on an unprivileged port with port forwarding from e.g. 443, and be connected to on port 443.")

	flag.Parse()

	if extAddress == "" {
		extAddress = listen
	}

	addr, err := net.ResolveTCPAddr("tcp", extAddress)
	if err != nil {
		log.Fatal(err)
	}

	log.Println(LongVersion)

	maxDescriptors, err := osutil.MaximizeOpenFileLimit()
	if maxDescriptors > 0 {
		// Assume that 20% of FD's are leaked/unaccounted for.
		descriptorLimit = int64(maxDescriptors*80) / 100
		log.Println("Connection limit", descriptorLimit)

		go monitorLimits()
	} else if err != nil && runtime.GOOS != "windows" {
		log.Println("Assuming no connection limit, due to error retrievign rlimits:", err)
	}

	sessionAddress = addr.IP[:]
	sessionPort = uint16(addr.Port)

	certFile, keyFile := filepath.Join(dir, "cert.pem"), filepath.Join(dir, "key.pem")
	cert, err := tls.LoadX509KeyPair(certFile, keyFile)
	if err != nil {
		log.Println("Failed to load keypair. Generating one, this might take a while...")
		cert, err = tlsutil.NewCertificate(certFile, keyFile, "relaysrv", 3072)
		if err != nil {
			log.Fatalln("Failed to generate X509 key pair:", err)
		}
	}

	tlsCfg := &tls.Config{
		Certificates:           []tls.Certificate{cert},
		NextProtos:             []string{protocol.ProtocolName},
		ClientAuth:             tls.RequestClientCert,
		SessionTicketsDisabled: true,
		InsecureSkipVerify:     true,
		MinVersion:             tls.VersionTLS12,
		CipherSuites: []uint16{
			tls.TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,
			tls.TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,
			tls.TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,
			tls.TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,
			tls.TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,
			tls.TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,
		},
	}

	id := syncthingprotocol.NewDeviceID(cert.Certificate[0])
	if debug {
		log.Println("ID:", id)
	}

	if sessionLimitBps > 0 {
		sessionLimiter = ratelimit.NewBucketWithRate(float64(sessionLimitBps), int64(2*sessionLimitBps))
	}
	if globalLimitBps > 0 {
		globalLimiter = ratelimit.NewBucketWithRate(float64(globalLimitBps), int64(2*globalLimitBps))
	}

	if statusAddr != "" {
		go statusService(statusAddr)
	}

	uri, err := url.Parse(fmt.Sprintf("relay://%s/?id=%s&pingInterval=%s&networkTimeout=%s&sessionLimitBps=%d&globalLimitBps=%d&statusAddr=%s&providedBy=%s", extAddress, id, pingInterval, networkTimeout, sessionLimitBps, globalLimitBps, statusAddr, providedBy))
	if err != nil {
		log.Fatalln("Failed to construct URI", err)
	}

	log.Println("URI:", uri.String())

	if poolAddrs == defaultPoolAddrs {
		log.Println("!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
		log.Println("!!  Joining default relay pools, this relay will be available for public use. !!")
		log.Println(`!!      Use the -pools="" command line option to make the relay private.      !!`)
		log.Println("!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
//.........这里部分代码省略.........