当前位置: 首页>>代码示例>>Golang>>正文


Golang PacketBuilder.AddLayer方法代码示例

本文整理汇总了Golang中github.com/packetbeat/gopacket.PacketBuilder.AddLayer方法的典型用法代码示例。如果您正苦于以下问题:Golang PacketBuilder.AddLayer方法的具体用法?Golang PacketBuilder.AddLayer怎么用?Golang PacketBuilder.AddLayer使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在github.com/packetbeat/gopacket.PacketBuilder的用法示例。


在下文中一共展示了PacketBuilder.AddLayer方法的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。

示例1: decodeSCTPChunkTypeUnknown

func decodeSCTPChunkTypeUnknown(data []byte, p gopacket.PacketBuilder) error {
	sc := &SCTPUnknownChunkType{SCTPChunk: decodeSCTPChunk(data)}
	sc.bytes = data[:sc.ActualLength]
	p.AddLayer(sc)
	p.SetErrorLayer(sc)
	return p.NextDecoder(gopacket.DecodeFunc(decodeWithSCTPChunkTypePrefix))
}
开发者ID:donckers,项目名称:gopacket,代码行数:7,代码来源:sctp.go

示例2: decodeSCTPEmptyLayer

func decodeSCTPEmptyLayer(data []byte, p gopacket.PacketBuilder) error {
	sc := &SCTPEmptyLayer{
		SCTPChunk: decodeSCTPChunk(data),
	}
	p.AddLayer(sc)
	return p.NextDecoder(gopacket.DecodeFunc(decodeWithSCTPChunkTypePrefix))
}
开发者ID:donckers,项目名称:gopacket,代码行数:7,代码来源:sctp.go

示例3: decodeSCTPCookieEcho

func decodeSCTPCookieEcho(data []byte, p gopacket.PacketBuilder) error {
	sc := &SCTPCookieEcho{
		SCTPChunk: decodeSCTPChunk(data),
	}
	sc.Cookie = data[4:sc.Length]
	p.AddLayer(sc)
	return p.NextDecoder(gopacket.DecodeFunc(decodeWithSCTPChunkTypePrefix))
}
开发者ID:donckers,项目名称:gopacket,代码行数:8,代码来源:sctp.go

示例4: decodeSCTPShutdown

func decodeSCTPShutdown(data []byte, p gopacket.PacketBuilder) error {
	sc := &SCTPShutdown{
		SCTPChunk:        decodeSCTPChunk(data),
		CumulativeTSNAck: binary.BigEndian.Uint32(data[4:8]),
	}
	p.AddLayer(sc)
	return p.NextDecoder(gopacket.DecodeFunc(decodeWithSCTPChunkTypePrefix))
}
开发者ID:donckers,项目名称:gopacket,代码行数:8,代码来源:sctp.go

示例5: decodeICMPv4

func decodeICMPv4(data []byte, p gopacket.PacketBuilder) error {
	i := &ICMPv4{}
	err := i.DecodeFromBytes(data, p)
	if err != nil {
		return err
	}
	p.AddLayer(i)
	return p.NextDecoder(gopacket.LayerTypePayload)
}
开发者ID:donckers,项目名称:gopacket,代码行数:9,代码来源:icmp4.go

示例6: decodeLinuxSLL

func decodeLinuxSLL(data []byte, p gopacket.PacketBuilder) error {
	sll := &LinuxSLL{}
	if err := sll.DecodeFromBytes(data, p); err != nil {
		return err
	}
	p.AddLayer(sll)
	p.SetLinkLayer(sll)
	return p.NextDecoder(sll.EthernetType)
}
开发者ID:donckers,项目名称:gopacket,代码行数:9,代码来源:linux_sll.go

示例7: decodeIPv6HopByHop

func decodeIPv6HopByHop(data []byte, p gopacket.PacketBuilder) error {
	i := &IPv6HopByHop{}
	err := i.DecodeFromBytes(data, p)
	p.AddLayer(i)
	if err != nil {
		return err
	}
	return p.NextDecoder(i.NextHeader)
}
开发者ID:donckers,项目名称:gopacket,代码行数:9,代码来源:ip6.go

示例8: decodeIPSecESP

func decodeIPSecESP(data []byte, p gopacket.PacketBuilder) error {
	i := &IPSecESP{
		BaseLayer: BaseLayer{data, nil},
		SPI:       binary.BigEndian.Uint32(data[:4]),
		Seq:       binary.BigEndian.Uint32(data[4:8]),
		Encrypted: data[8:],
	}
	p.AddLayer(i)
	return nil
}
开发者ID:donckers,项目名称:gopacket,代码行数:10,代码来源:ipsec.go

示例9: decodeUDP

func decodeUDP(data []byte, p gopacket.PacketBuilder) error {
	udp := &UDP{}
	err := udp.DecodeFromBytes(data, p)
	p.AddLayer(udp)
	p.SetTransportLayer(udp)
	if err != nil {
		return err
	}
	return p.NextDecoder(udp.NextLayerType())
}
开发者ID:donckers,项目名称:gopacket,代码行数:10,代码来源:udp.go

示例10: decodeEthernet

func decodeEthernet(data []byte, p gopacket.PacketBuilder) error {
	eth := &Ethernet{}
	err := eth.DecodeFromBytes(data, p)
	if err != nil {
		return err
	}
	p.AddLayer(eth)
	p.SetLinkLayer(eth)
	return p.NextDecoder(eth.EthernetType)
}
开发者ID:donckers,项目名称:gopacket,代码行数:10,代码来源:ethernet.go

示例11: decodeIPv4

func decodeIPv4(data []byte, p gopacket.PacketBuilder) error {
	ip := &IPv4{}
	err := ip.DecodeFromBytes(data, p)
	p.AddLayer(ip)
	p.SetNetworkLayer(ip)
	if err != nil {
		return err
	}
	return p.NextDecoder(ip.NextLayerType())
}
开发者ID:donckers,项目名称:gopacket,代码行数:10,代码来源:ip4.go

示例12: decodeDNS

// decodeDNS decodes the byte slice into a DNS type. It also
// setups the application Layer in PacketBuilder.
func decodeDNS(data []byte, p gopacket.PacketBuilder) error {
	d := &DNS{}
	err := d.DecodeFromBytes(data, p)
	if err != nil {
		return err
	}
	p.AddLayer(d)
	p.SetApplicationLayer(d)
	return nil
}
开发者ID:donckers,项目名称:gopacket,代码行数:12,代码来源:dns.go

示例13: decodeTCP

func decodeTCP(data []byte, p gopacket.PacketBuilder) error {
	tcp := &TCP{}
	err := tcp.DecodeFromBytes(data, p)
	p.AddLayer(tcp)
	p.SetTransportLayer(tcp)
	if err != nil {
		return err
	}
	return p.NextDecoder(gopacket.LayerTypePayload)
}
开发者ID:donckers,项目名称:gopacket,代码行数:10,代码来源:tcp.go

示例14: decodeIPSecAH

func decodeIPSecAH(data []byte, p gopacket.PacketBuilder) error {
	i := &IPSecAH{
		ipv6ExtensionBase: decodeIPv6ExtensionBase(data),
		Reserved:          binary.BigEndian.Uint16(data[2:4]),
		SPI:               binary.BigEndian.Uint32(data[4:8]),
		Seq:               binary.BigEndian.Uint32(data[8:12]),
	}
	i.AuthenticationData = i.Contents[12:]
	p.AddLayer(i)
	return p.NextDecoder(i.NextHeader)
}
开发者ID:donckers,项目名称:gopacket,代码行数:11,代码来源:ipsec.go

示例15: decodeEthernetCTP

func decodeEthernetCTP(data []byte, p gopacket.PacketBuilder) error {
	c := &EthernetCTP{
		SkipCount: binary.LittleEndian.Uint16(data[:2]),
		BaseLayer: BaseLayer{data[:2], data[2:]},
	}
	if c.SkipCount%2 != 0 {
		return fmt.Errorf("EthernetCTP skip count is odd: %d", c.SkipCount)
	}
	p.AddLayer(c)
	return p.NextDecoder(gopacket.DecodeFunc(decodeEthernetCTPFromFunctionType))
}
开发者ID:donckers,项目名称:gopacket,代码行数:11,代码来源:ctp.go


注:本文中的github.com/packetbeat/gopacket.PacketBuilder.AddLayer方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。