Golang names.VolumeTag类代码示例

// SetVolumeInfo sets the VolumeInfo for the specified volume.
func (st *State) SetVolumeInfo(tag names.VolumeTag, info VolumeInfo) (err error) {
	defer errors.DeferredAnnotatef(&err, "cannot set info for volume %q", tag.Id())
	if info.VolumeId == "" {
		return errors.New("volume ID not set")
	}
	// TODO(axw) we should reject info without VolumeId set; can't do this
	// until the providers all set it correctly.
	buildTxn := func(attempt int) ([]txn.Op, error) {
		v, err := st.Volume(tag)
		if err != nil {
			return nil, errors.Trace(err)
		}
		// If the volume has parameters, unset them when
		// we set info for the first time, ensuring that
		// params and info are mutually exclusive.
		var unsetParams bool
		var ops []txn.Op
		if params, ok := v.Params(); ok {
			info.Pool = params.Pool
			unsetParams = true
		} else {
			// Ensure immutable properties do not change.
			oldInfo, err := v.Info()
			if err != nil {
				return nil, err
			}
			if err := validateVolumeInfoChange(info, oldInfo); err != nil {
				return nil, err
			}
		}
		ops = append(ops, setVolumeInfoOps(tag, info, unsetParams)...)
		return ops, nil
	}
	return st.run(buildTxn)
}

// VolumeAttachments returns all of the VolumeAttachments for the specified
// volume.
func (st *State) VolumeAttachments(volume names.VolumeTag) ([]VolumeAttachment, error) {
	attachments, err := st.volumeAttachments(bson.D{{"volumeid", volume.Id()}})
	if err != nil {
		return nil, errors.Annotatef(err, "getting volume attachments for volume %q", volume.Id())
	}
	return attachments, nil
}

// SetVolumeStatus sets the status of the specified volume.
func (st *State) SetVolumeStatus(tag names.VolumeTag, status Status, info string, data map[string]interface{}) error {
	switch status {
	case StatusAttaching, StatusAttached, StatusDetaching, StatusDestroying:
	case StatusError:
		if info == "" {
			return errors.Errorf("cannot set status %q without info", status)
		}
	case StatusPending:
		// If a volume is not yet provisioned, we allow its status
		// to be set back to pending (when a retry is to occur).
		v, err := st.Volume(tag)
		if err != nil {
			return errors.Trace(err)
		}
		_, err = v.Info()
		if errors.IsNotProvisioned(err) {
			break
		}
		return errors.Errorf("cannot set status %q", status)
	default:
		return errors.Errorf("cannot set invalid status %q", status)
	}
	return setStatus(st, setStatusParams{
		badge:     "volume",
		globalKey: volumeGlobalKey(tag.Id()),
		status:    status,
		message:   info,
		rawData:   data,
	})
}

// addFilesystemOps returns txn.Ops to create a new filesystem with the
// specified parameters. If the storage source cannot create filesystems
// directly, a volume will be created and Juju will manage a filesystem
// on it.
func (st *State) addFilesystemOps(params FilesystemParams, machineId string) ([]txn.Op, names.FilesystemTag, names.VolumeTag, error) {
	if params.binding == nil {
		params.binding = names.NewMachineTag(machineId)
	}
	params, err := st.filesystemParamsWithDefaults(params)
	if err != nil {
		return nil, names.FilesystemTag{}, names.VolumeTag{}, errors.Trace(err)
	}
	machineId, err = st.validateFilesystemParams(params, machineId)
	if err != nil {
		return nil, names.FilesystemTag{}, names.VolumeTag{}, errors.Annotate(err, "validating filesystem params")
	}

	filesystemId, err := newFilesystemId(st, machineId)
	if err != nil {
		return nil, names.FilesystemTag{}, names.VolumeTag{}, errors.Annotate(err, "cannot generate filesystem name")
	}
	filesystemTag := names.NewFilesystemTag(filesystemId)

	// Check if the filesystem needs a volume.
	var volumeId string
	var volumeTag names.VolumeTag
	var ops []txn.Op
	_, provider, err := poolStorageProvider(st, params.Pool)
	if err != nil {
		return nil, names.FilesystemTag{}, names.VolumeTag{}, errors.Trace(err)
	}
	if !provider.Supports(storage.StorageKindFilesystem) {
		var volumeOp txn.Op
		volumeParams := VolumeParams{
			params.storage,
			filesystemTag, // volume is bound to filesystem
			params.Pool,
			params.Size,
		}
		volumeOp, volumeTag, err = st.addVolumeOp(volumeParams, machineId)
		if err != nil {
			return nil, names.FilesystemTag{}, names.VolumeTag{}, errors.Annotate(err, "creating backing volume")
		}
		volumeId = volumeTag.Id()
		ops = append(ops, volumeOp)
	}

	filesystemOp := txn.Op{
		C:      filesystemsC,
		Id:     filesystemId,
		Assert: txn.DocMissing,
		Insert: &filesystemDoc{
			FilesystemId: filesystemId,
			VolumeId:     volumeId,
			StorageId:    params.storage.Id(),
			Binding:      params.binding.String(),
			Params:       &params,
			// Every filesystem is created with one attachment.
			AttachmentCount: 1,
		},
	}
	ops = append(ops, filesystemOp)
	return ops, filesystemTag, volumeTag, nil
}

func detachVolumeOps(m names.MachineTag, v names.VolumeTag) []txn.Op {
	return []txn.Op{{
		C:      volumeAttachmentsC,
		Id:     volumeAttachmentId(m.Id(), v.Id()),
		Assert: isAliveDoc,
		Update: bson.D{{"$set", bson.D{{"life", Dying}}}},
	}}
}

func (s *managedFilesystemSource) backingVolumeBlockDevice(v names.VolumeTag) (storage.BlockDevice, error) {
	blockDevice, ok := s.volumeBlockDevices[v]
	if !ok {
		return storage.BlockDevice{}, errors.Errorf(
			"backing-volume %s is not yet attached", v.Id(),
		)
	}
	return blockDevice, nil
}

func setVolumeInfoOps(tag names.VolumeTag, info VolumeInfo, unsetParams bool) []txn.Op {
	asserts := isAliveDoc
	update := bson.D{
		{"$set", bson.D{{"info", &info}}},
	}
	if unsetParams {
		asserts = append(asserts, bson.DocElem{"info", bson.D{{"$exists", false}}})
		asserts = append(asserts, bson.DocElem{"params", bson.D{{"$exists", true}}})
		update = append(update, bson.DocElem{"$unset", bson.D{{"params", nil}}})
	}
	return []txn.Op{{
		C:      volumesC,
		Id:     tag.Id(),
		Assert: asserts,
		Update: update,
	}}
}

// DetachVolume marks the volume attachment identified by the specified machine
// and volume tags as Dying, if it is Alive. DetachVolume will fail with a
// IsContainsFilesystem error if the volume contains an attached filesystem; the
// filesystem attachment must be removed first.
func (st *State) DetachVolume(machine names.MachineTag, volume names.VolumeTag) (err error) {
	defer errors.DeferredAnnotatef(&err, "detaching volume %s from machine %s", volume.Id(), machine.Id())
	// If the volume is backing a filesystem, the volume cannot be detached
	// until the filesystem has been detached.
	if _, err := st.volumeFilesystemAttachment(machine, volume); err == nil {
		return &errContainsFilesystem{errors.New("volume contains attached filesystem")}
	} else if !errors.IsNotFound(err) {
		return errors.Trace(err)
	}
	buildTxn := func(attempt int) ([]txn.Op, error) {
		va, err := st.VolumeAttachment(machine, volume)
		if err != nil {
			return nil, errors.Trace(err)
		}
		if va.Life() != Alive {
			return nil, jujutxn.ErrNoOperations
		}
		return detachVolumeOps(machine, volume), nil
	}
	return st.run(buildTxn)
}

// RemoveVolume removes the volume from state. RemoveVolume will fail if
// the volume is not Dead, which implies that it still has attachments.
func (st *State) RemoveVolume(tag names.VolumeTag) (err error) {
	defer errors.DeferredAnnotatef(&err, "removing volume %s", tag.Id())
	buildTxn := func(attempt int) ([]txn.Op, error) {
		volume, err := st.Volume(tag)
		if errors.IsNotFound(err) {
			return nil, jujutxn.ErrNoOperations
		} else if err != nil {
			return nil, errors.Trace(err)
		}
		if volume.Life() != Dead {
			return nil, errors.New("volume is not dead")
		}
		return []txn.Op{{
			C:      volumesC,
			Id:     tag.Id(),
			Assert: txn.DocExists,
			Remove: true,
		}}, nil
	}
	return st.run(buildTxn)
}

// DestroyVolume ensures that the volume and any attachments to it will be
// destroyed and removed from state at some point in the future. DestroyVolume
// will fail with an IsContainsFilesystem error if the volume contains a
// filesystem; the filesystem must be fully removed first.
func (st *State) DestroyVolume(tag names.VolumeTag) (err error) {
	defer errors.DeferredAnnotatef(&err, "destroying volume %s", tag.Id())
	if _, err := st.VolumeFilesystem(tag); err == nil {
		return &errContainsFilesystem{errors.New("volume contains filesystem")}
	} else if !errors.IsNotFound(err) {
		return errors.Trace(err)
	}
	buildTxn := func(attempt int) ([]txn.Op, error) {
		volume, err := st.volumeByTag(tag)
		if errors.IsNotFound(err) {
			return nil, jujutxn.ErrNoOperations
		} else if err != nil {
			return nil, errors.Trace(err)
		}
		if volume.Life() != Alive {
			return nil, jujutxn.ErrNoOperations
		}
		return destroyVolumeOps(st, volume), nil
	}
	return st.run(buildTxn)
}

// SetVolumeAttachmentInfo sets the VolumeAttachmentInfo for the specified
// volume attachment.
func (st *State) SetVolumeAttachmentInfo(machineTag names.MachineTag, volumeTag names.VolumeTag, info VolumeAttachmentInfo) (err error) {
	defer errors.DeferredAnnotatef(&err, "cannot set info for volume attachment %s:%s", volumeTag.Id(), machineTag.Id())
	v, err := st.Volume(volumeTag)
	if err != nil {
		return errors.Trace(err)
	}
	// Ensure volume is provisioned before setting attachment info.
	// A volume cannot go from being provisioned to unprovisioned,
	// so there is no txn.Op for this below.
	if _, err := v.Info(); err != nil {
		return errors.Trace(err)
	}
	// Also ensure the machine is provisioned.
	m, err := st.Machine(machineTag.Id())
	if err != nil {
		return errors.Trace(err)
	}
	if _, err := m.InstanceId(); err != nil {
		return errors.Trace(err)
	}
	return st.setVolumeAttachmentInfo(machineTag, volumeTag, info)
}

func (m *mockVolumeAccessor) provisionVolume(tag names.VolumeTag) params.Volume {
	v := params.Volume{
		VolumeTag: tag.String(),
		Info: params.VolumeInfo{
			VolumeId: "vol-" + tag.Id(),
		},
	}
	m.provisionedVolumes[tag.String()] = v
	return v
}

// VolumeAttachment returns the VolumeAttachment corresponding to
// the specified volume and machine.
func (st *State) VolumeAttachment(machine names.MachineTag, volume names.VolumeTag) (VolumeAttachment, error) {
	coll, cleanup := st.getCollection(volumeAttachmentsC)
	defer cleanup()

	var att volumeAttachment
	err := coll.FindId(volumeAttachmentId(machine.Id(), volume.Id())).One(&att.doc)
	if err == mgo.ErrNotFound {
		return nil, errors.NotFoundf("volume %q on machine %q", volume.Id(), machine.Id())
	} else if err != nil {
		return nil, errors.Annotatef(err, "getting volume %q on machine %q", volume.Id(), machine.Id())
	}
	return &att, nil
}

// RemoveVolumeAttachment removes the volume attachment from state.
// RemoveVolumeAttachment will fail if the attachment is not Dying.
func (st *State) RemoveVolumeAttachment(machine names.MachineTag, volume names.VolumeTag) (err error) {
	defer errors.DeferredAnnotatef(&err, "removing attachment of volume %s from machine %s", volume.Id(), machine.Id())
	buildTxn := func(attempt int) ([]txn.Op, error) {
		attachment, err := st.VolumeAttachment(machine, volume)
		if errors.IsNotFound(err) && attempt > 0 {
			// We only ignore IsNotFound on attempts after the
			// first, since we expect the volume attachment to
			// be there initially.
			return nil, jujutxn.ErrNoOperations
		}
		if err != nil {
			return nil, errors.Trace(err)
		}
		if attachment.Life() != Dying {
			return nil, errors.New("volume attachment is not dying")
		}
		v, err := st.volumeByTag(volume)
		if err != nil {
			return nil, errors.Trace(err)
		}
		return removeVolumeAttachmentOps(machine, v), nil
	}
	return st.run(buildTxn)
}

func (st *State) volumeFilesystem(tag names.VolumeTag) (*filesystem, error) {
	query := bson.D{{"volumeid", tag.Id()}}
	description := fmt.Sprintf("filesystem for volume %q", tag.Id())
	return st.filesystem(query, description)
}