Golang ConfigSetterWriter.MongoInfo方法代码示例

//.........这里部分代码省略.........
	}
	logger.Infof("wrote new agent config")

	if backupMachine.Id() != "0" {
		logger.Infof("extra work needed backup belongs to %q machine", backupMachine.String())
		serviceName := "jujud-" + agentConfig.Tag().String()
		aInfo := service.NewMachineAgentInfo(
			agentConfig.Tag().Id(),
			dataDir,
			paths.MustSucceed(paths.LogDir(args.NewInstSeries)),
		)

		// TODO(perrito666) renderer should have a RendererForSeries, for the moment
		// restore only works on linuxes.
		renderer, _ := shell.NewRenderer("bash")
		serviceAgentConf := service.AgentConf(aInfo, renderer)
		svc, err := service.NewService(serviceName, serviceAgentConf, args.NewInstSeries)
		if err != nil {
			return nil, errors.Annotate(err, "cannot generate service for the restored agent.")
		}
		if err := svc.Install(); err != nil {
			return nil, errors.Annotate(err, "cannot install service for the restored agent.")
		}
		logger.Infof("new machine service")
	}

	logger.Infof("mongo service will be reinstalled to ensure its presence")
	if err := ensureMongoService(agentConfig); err != nil {
		return nil, errors.Annotate(err, "failed to reinstall service for juju-db")
	}

	logger.Infof("new mongo will be restored")
	// Restore mongodb from backup
	if err := placeNewMongoService(workspace.DBDumpDir, version); err != nil {
		return nil, errors.Annotate(err, "error restoring state from backup")
	}

	// Re-start replicaset with the new value for server address
	dialInfo, err := newDialInfo(args.PrivateAddress, agentConfig)
	if err != nil {
		return nil, errors.Annotate(err, "cannot produce dial information")
	}

	logger.Infof("restarting replicaset")
	memberHostPort := net.JoinHostPort(args.PrivateAddress, strconv.Itoa(ssi.StatePort))
	err = resetReplicaSet(dialInfo, memberHostPort)
	if err != nil {
		return nil, errors.Annotate(err, "cannot reset replicaSet")
	}

	err = updateMongoEntries(args.NewInstId, args.NewInstTag.Id(), backupMachine.Id(), dialInfo)
	if err != nil {
		return nil, errors.Annotate(err, "cannot update mongo entries")
	}

	// From here we work with the restored controller
	mgoInfo, ok := agentConfig.MongoInfo()
	if !ok {
		return nil, errors.Errorf("cannot retrieve info to connect to mongo")
	}

	st, err := newStateConnection(agentConfig.Model(), mgoInfo)
	if err != nil {
		return nil, errors.Trace(err)
	}
	defer st.Close()

	machine, err := st.Machine(backupMachine.Id())
	if err != nil {
		return nil, errors.Trace(err)
	}

	err = updateMachineAddresses(machine, args.PrivateAddress, args.PublicAddress)
	if err != nil {
		return nil, errors.Annotate(err, "cannot update api server machine addresses")
	}

	// update all agents known to the new controller.
	// TODO(perrito666): We should never stop process because of this.
	// updateAllMachines will not return errors for individual
	// agent update failures
	machines, err := st.AllMachines()
	if err != nil {
		return nil, errors.Trace(err)
	}
	if err = updateAllMachines(args.PrivateAddress, machines); err != nil {
		return nil, errors.Annotate(err, "cannot update agents")
	}

	info, err := st.RestoreInfoSetter()
	if err != nil {
		return nil, errors.Trace(err)
	}

	// Mark restoreInfo as Finished so upon restart of the apiserver
	// the client can reconnect and determine if we where succesful.
	err = info.SetStatus(state.RestoreFinished)

	return backupMachine, errors.Annotate(err, "failed to set status to finished")
}

//.........这里部分代码省略.........
		Version:         mgoVer,
		TagUser:         tagUser,
		TagUserPassword: tagUserPassword,
		RunCommandFn:    runCommand,
		StartMongo:      mongo.StartService,
		StopMongo:       mongo.StopService,
		NewMongoSession: NewMongoSession,
		GetDB:           GetDB,
	}

	// Restore mongodb from backup
	restorer, err := NewDBRestorer(rArgs)
	if err != nil {
		return nil, errors.Annotate(err, "error preparing for restore")
	}
	if err := restorer.Restore(workspace.DBDumpDir, oldDialInfo); err != nil {
		return nil, errors.Annotate(err, "error restoring state from backup")
	}

	// Re-start replicaset with the new value for server address
	logger.Infof("restarting replicaset")
	memberHostPort := net.JoinHostPort(args.PrivateAddress, strconv.Itoa(ssi.StatePort))
	err = resetReplicaSet(dialInfo, memberHostPort)
	if err != nil {
		return nil, errors.Annotate(err, "cannot reset replicaSet")
	}

	err = updateMongoEntries(args.NewInstId, args.NewInstTag.Id(), backupMachine.Id(), dialInfo)
	if err != nil {
		return nil, errors.Annotate(err, "cannot update mongo entries")
	}

	// From here we work with the restored controller
	mgoInfo, ok := agentConfig.MongoInfo()
	if !ok {
		return nil, errors.Errorf("cannot retrieve info to connect to mongo")
	}

	st, err := newStateConnection(agentConfig.Controller(), agentConfig.Model(), mgoInfo)
	if err != nil {
		return nil, errors.Trace(err)
	}
	defer st.Close()

	machine, err := st.Machine(backupMachine.Id())
	if err != nil {
		return nil, errors.Trace(err)
	}

	logger.Infof("updating local machine addresses")
	err = updateMachineAddresses(machine, args.PrivateAddress, args.PublicAddress)
	if err != nil {
		return nil, errors.Annotate(err, "cannot update api server machine addresses")
	}
	// Update the APIHostPorts as well. Under normal circumstances the API
	// Host Ports are only set during bootstrap and by the peergrouper worker.
	// Unfortunately right now, the peer grouper is busy restarting and isn't
	// guaranteed to set the host ports before the remote machines we are
	// about to tell about us. If it doesn't, the remote machine gets its
	// agent.conf file updated with this new machine's IP address, it then
	// starts, and the "api-address-updater" worker asks for the api host
	// ports, and gets told the old IP address of the machine that was backed
	// up. It then writes this incorrect file to its agent.conf file, which
	// causes it to attempt to reconnect to the api server. Unfortunately it
	// now has the wrong address and can never get the  correct one.
	// So, we set it explicitly here.

// Restore handles either returning or creating a state server to a backed up status:
// * extracts the content of the given backup file and:
// * runs mongorestore with the backed up mongo dump
// * updates and writes configuration files
// * updates existing db entries to make sure they hold no references to
// old instances
// * updates config in all agents.
func (b *backups) Restore(backupId string, args RestoreArgs) error {
	meta, backupReader, err := b.Get(backupId)
	if err != nil {
		return errors.Annotatef(err, "could not fetch backup %q", backupId)
	}

	defer backupReader.Close()

	workspace, err := NewArchiveWorkspaceReader(backupReader)
	if err != nil {
		return errors.Annotate(err, "cannot unpack backup file")
	}
	defer workspace.Close()

	// TODO(perrito666) Create a compatibility table of sorts.
	version := meta.Origin.Version
	backupMachine := names.NewMachineTag(meta.Origin.Machine)

	// delete all the files to be replaced
	if err := PrepareMachineForRestore(); err != nil {
		return errors.Annotate(err, "cannot delete existing files")
	}

	if err := workspace.UnpackFilesBundle(filesystemRoot()); err != nil {
		return errors.Annotate(err, "cannot obtain system files from backup")
	}

	if err := updateBackupMachineTag(backupMachine, args.NewInstTag); err != nil {
		return errors.Annotate(err, "cannot update paths to reflect current machine id")
	}

	var agentConfig agent.ConfigSetterWriter
	// The path for the config file might change if the tag changed
	// and also the rest of the path, so we assume as little as possible.
	datadir, err := paths.DataDir(args.NewInstSeries)
	if err != nil {
		return errors.Annotate(err, "cannot determine DataDir for the restored machine")
	}
	agentConfigFile := agent.ConfigPath(datadir, args.NewInstTag)
	if agentConfig, err = agent.ReadConfig(agentConfigFile); err != nil {
		return errors.Annotate(err, "cannot load agent config from disk")
	}
	ssi, ok := agentConfig.StateServingInfo()
	if !ok {
		return errors.Errorf("cannot determine state serving info")
	}
	// The machine tag might have changed, we update it.
	agentConfig.SetValue("tag", args.NewInstTag.String())
	apiHostPorts := [][]network.HostPort{
		network.NewHostPorts(ssi.APIPort, args.PrivateAddress),
	}
	agentConfig.SetAPIHostPorts(apiHostPorts)
	if err := agentConfig.Write(); err != nil {
		return errors.Annotate(err, "cannot write new agent configuration")
	}

	// Restore mongodb from backup
	if err := placeNewMongo(workspace.DBDumpDir, version); err != nil {
		return errors.Annotate(err, "error restoring state from backup")
	}

	// Re-start replicaset with the new value for server address
	dialInfo, err := newDialInfo(args.PrivateAddress, agentConfig)
	if err != nil {
		return errors.Annotate(err, "cannot produce dial information")
	}

	memberHostPort := fmt.Sprintf("%s:%d", args.PrivateAddress, ssi.StatePort)
	err = resetReplicaSet(dialInfo, memberHostPort)
	if err != nil {
		return errors.Annotate(err, "cannot reset replicaSet")
	}

	err = updateMongoEntries(args.NewInstId, args.NewInstTag.Id(), backupMachine.Id(), dialInfo)
	if err != nil {
		return errors.Annotate(err, "cannot update mongo entries")
	}

	// From here we work with the restored state server
	mgoInfo, ok := agentConfig.MongoInfo()
	if !ok {
		return errors.Errorf("cannot retrieve info to connect to mongo")
	}

	st, err := newStateConnection(mgoInfo)
	if err != nil {
		return errors.Trace(err)
	}
	defer st.Close()

	machine, err := st.Machine(args.NewInstTag.Id())
	if err != nil {
		return errors.Trace(err)
//.........这里部分代码省略.........