当前位置: 首页>>代码示例>>Golang>>正文


Golang Block.IncludesOneOf方法代码示例

本文整理汇总了Golang中github.com/joushou/gocnc/gcode.Block.IncludesOneOf方法的典型用法代码示例。如果您正苦于以下问题:Golang Block.IncludesOneOf方法的具体用法?Golang Block.IncludesOneOf怎么用?Golang Block.IncludesOneOf使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在github.com/joushou/gocnc/gcode.Block的用法示例。


在下文中一共展示了Block.IncludesOneOf方法的2个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。

示例1: performMove

func (vm *Machine) performMove(stmt *gcode.Block) {
	if !stmt.IncludesOneOf('X', 'Y', 'Z') {
		// Nothing to do
		return
	}

	s := vm.State

	if s.FeedMode == FeedModeInvTime && s.Feedrate == -1 && s.MoveMode != MoveModeRapid {
		invalidCommand("motionGroup", "rapid", "Non-rapid inverse time feed mode move attempted without a set feedrate")
	}

	if vm.CoordinateSystem.OverrideActive() {
		if s.CutterCompensation != CutCompModeNone {
			invalidCommand("motionGroup", "move", "Coordinate override attempted with cutter compensation enabled")
		}

		if s.MoveMode == MoveModeCWArc || s.MoveMode == MoveModeCCWArc {
			invalidCommand("motionGroup", "arc", "Coordinate override attempted for arc")
		}
	}

	if s.MoveMode == MoveModeCWArc || s.MoveMode == MoveModeCCWArc {
		// Arc
		newX, newY, newZ, newI, newJ, newK := vm.calcPos(*stmt)
		vm.arc(newX, newY, newZ, newI, newJ, newK, stmt.GetWordDefault('P', 1))
		stmt.RemoveAddress('X', 'Y', 'Z', 'I', 'J', 'K', 'P')

	} else if s.MoveMode == MoveModeLinear || s.MoveMode == MoveModeRapid {
		// Line
		newX, newY, newZ, _, _, _ := vm.calcPos(*stmt)
		vm.move(newX, newY, newZ)
		stmt.RemoveAddress('X', 'Y', 'Z')

	} else {
		invalidCommand("motionGroup", "move", fmt.Sprintf("Move attempted without an active move mode [%s]", stmt.Export(-1)))
	}
}
开发者ID:raylee,项目名称:gocnc,代码行数:38,代码来源:main.go

示例2: nonModals

func (vm *Machine) nonModals(stmt *gcode.Block) {
	if w, err := stmt.GetModalGroup("nonModalGroup"); err == nil {
		if w != nil {
			if w.Address != 'G' {
				unknownCommand("nonModalGroup", w)
			}

			switch w.Command {
			case 4:
				if val, err := stmt.GetWord('P'); err == nil {
					if val < 0 {
						invalidCommand("nonModalGroup", "dwell", "P word negative")
					}
					vm.dwell(val)
				} else {
					invalidCommand("nonModalGroup", "dwell", "P word not specified or specified multiple times")
				}
				stmt.RemoveAddress('P')

			case 10:
				if val, err := stmt.GetWord('L'); err == nil {
					if val == 2 {
						// Set coordinate system offsets
						if cs, err := stmt.GetWord('P'); err == nil {
							cs := int(cs)
							x, y, z := stmt.GetWordDefault('X', 0), stmt.GetWordDefault('Y', 0), stmt.GetWordDefault('Z', 0)
							x, y, z = vm.axesToMetric(x, y, z)

							vm.CoordinateSystem.SetCoordinateSystem(x, y, z, cs)
							stmt.RemoveAddress('X', 'Y', 'Z')
						} else {
							invalidCommand("nonModalGroup", "coordinate system configuration", "P word not specified or specified multiple times")
						}
						stmt.RemoveAddress('P')
					}
				} else {
					invalidCommand("nonModalGroup", "G10 configuration", "L word not specified or specified multiple times")
				}
				stmt.RemoveAddress('L')

			case 28:

				oldMode := vm.State.MoveMode
				vm.State.MoveMode = MoveModeRapid
				if stmt.IncludesOneOf('X', 'Y', 'Z') {
					newX, newY, newZ, _, _, _ := vm.calcPos(*stmt)
					vm.move(newX, newY, newZ)
					stmt.RemoveAddress('X', 'Y', 'Z')
				}
				vm.move(vm.StoredPos1.X, vm.StoredPos1.Y, vm.StoredPos1.Z)
				vm.State.MoveMode = oldMode

			case 28.1:
				pos := vm.curPos()
				vm.StoredPos1 = pos.Vector()

			case 30:
				oldMode := vm.State.MoveMode
				vm.State.MoveMode = MoveModeRapid
				if stmt.IncludesOneOf('X', 'Y', 'Z') {
					newX, newY, newZ, _, _, _ := vm.calcPos(*stmt)
					vm.move(newX, newY, newZ)
					stmt.RemoveAddress('X', 'Y', 'Z')
				}
				vm.move(vm.StoredPos2.X, vm.StoredPos2.Y, vm.StoredPos2.Z)
				vm.State.MoveMode = oldMode

			case 30.1:
				pos := vm.curPos()
				vm.StoredPos2 = pos.Vector()

			case 53:
				vm.CoordinateSystem.Override()

			case 92:
				if stmt.IncludesOneOf('X', 'Y', 'Z') {
					cp := vm.curPos()
					x, y, z := stmt.GetWordDefault('X', 0), stmt.GetWordDefault('Y', 0), stmt.GetWordDefault('Z', 0)
					x, y, z = vm.axesToMetric(x, y, z)

					vm.CoordinateSystem.DisableOffset()
					x, y, z = vm.CoordinateSystem.ApplyCoordinateSystem(x, y, z)
					diffX, diffY, diffZ := cp.X-x, cp.Y-y, cp.Z-z
					vm.CoordinateSystem.SetOffset(diffX, diffY, diffZ)
					vm.CoordinateSystem.EnableOffset()

					stmt.RemoveAddress('X', 'Y', 'Z')
				} else {
					invalidCommand("nonModalGroup", "G92 configuration", "No axis words specified")
				}
			case 92.1:
				vm.CoordinateSystem.EraseOffset()

			case 92.2:
				vm.CoordinateSystem.DisableOffset()

			case 92.3:
				vm.CoordinateSystem.EnableOffset()

			default:
//.........这里部分代码省略.........
开发者ID:raylee,项目名称:gocnc,代码行数:101,代码来源:main.go


注:本文中的github.com/joushou/gocnc/gcode.Block.IncludesOneOf方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。