Golang influxql.SelectStatement类代码示例

// WhereFields returns a list of non-"time" fields in the WHERE section of stmt.
func (m *Measurement) WhereFields(stmt *influxql.SelectStatement) []string {
	set := newStringSet()
	for _, name := range stmt.NamesInWhere() {
		if name != "time" && m.HasField(name) {
			set.add(name)
		}
	}
	return set.list()
}

// SelectTags returns a list of non-field tags in the SELECT section of stmt.
func (m *Measurement) SelectTags(stmt *influxql.SelectStatement) []string {
	set := newStringSet()
	for _, name := range stmt.NamesInSelect() {
		if !m.HasField(name) && m.HasTagKey(name) {
			set.add(name)
		}
	}
	return set.list()
}

// SelectFields returns a list of fields in the SELECT section of stmt.
func (m *Measurement) SelectFields(stmt *influxql.SelectStatement) []string {
	set := newStringSet()
	for _, name := range stmt.NamesInSelect() {
		if m.HasField(name) {
			set.add(name)
			continue
		}
	}
	return set.list()
}

// iteratorCreator returns a new instance of IteratorCreator based on stmt.
func (e *StatementExecutor) iteratorCreator(stmt *influxql.SelectStatement, opt *influxql.SelectOptions) (influxql.IteratorCreator, error) {
	// Retrieve a list of shard IDs.
	shards, err := e.MetaClient.ShardsByTimeRange(stmt.Sources, opt.MinTime, opt.MaxTime)
	if err != nil {
		return nil, err
	}

	// Reverse shards if in descending order.
	if !stmt.TimeAscending() {
		shards = meta.ShardInfos(shards).Reverse()
	}

	return e.TSDBStore.IteratorCreator(shards, opt)
}

func (e *StatementExecutor) createIterators(stmt *influxql.SelectStatement, ctx *influxql.ExecutionContext) ([]influxql.Iterator, *influxql.SelectStatement, error) {
	// It is important to "stamp" this time so that everywhere we evaluate `now()` in the statement is EXACTLY the same `now`
	now := time.Now().UTC()
	opt := influxql.SelectOptions{
		InterruptCh: ctx.InterruptCh,
		NodeID:      ctx.ExecutionOptions.NodeID,
		MaxSeriesN:  e.MaxSelectSeriesN,
	}

	// Replace instances of "now()" with the current time, and check the resultant times.
	nowValuer := influxql.NowValuer{Now: now}
	stmt.Condition = influxql.Reduce(stmt.Condition, &nowValuer)
	// Replace instances of "now()" with the current time in the dimensions.
	for _, d := range stmt.Dimensions {
		d.Expr = influxql.Reduce(d.Expr, &nowValuer)
	}

	var err error
	opt.MinTime, opt.MaxTime, err = influxql.TimeRange(stmt.Condition)
	if err != nil {
		return nil, stmt, err
	}

	if opt.MaxTime.IsZero() {
		// In the case that we're executing a meta query where the user cannot
		// specify a time condition, then we expand the default max time
		// to the maximum possible value, to ensure that data where all points
		// are in the future are returned.
		if influxql.Sources(stmt.Sources).HasSystemSource() {
			opt.MaxTime = time.Unix(0, influxql.MaxTime).UTC()
		} else {
			if interval, err := stmt.GroupByInterval(); err != nil {
				return nil, stmt, err
			} else if interval > 0 {
				opt.MaxTime = now
			} else {
				opt.MaxTime = time.Unix(0, influxql.MaxTime).UTC()
			}
		}
	}
	if opt.MinTime.IsZero() {
		opt.MinTime = time.Unix(0, influxql.MinTime).UTC()
	}

	// Convert DISTINCT into a call.
	stmt.RewriteDistinct()

	// Remove "time" from fields list.
	stmt.RewriteTimeFields()

	// Rewrite any regex conditions that could make use of the index.
	stmt.RewriteRegexConditions()

	// Create an iterator creator based on the shards in the cluster.
	ic, err := e.iteratorCreator(stmt, &opt)
	if err != nil {
		return nil, stmt, err
	}

	// Expand regex sources to their actual source names.
	if stmt.Sources.HasRegex() {
		sources, err := ic.ExpandSources(stmt.Sources)
		if err != nil {
			return nil, stmt, err
		}
		stmt.Sources = sources
	}

	// Rewrite wildcards, if any exist.
	tmp, err := stmt.RewriteFields(ic)
	if err != nil {
		return nil, stmt, err
	}
	stmt = tmp

	if e.MaxSelectBucketsN > 0 && !stmt.IsRawQuery {
		interval, err := stmt.GroupByInterval()
		if err != nil {
			return nil, stmt, err
		}

		if interval > 0 {
			// Determine the start and end time matched to the interval (may not match the actual times).
			min := opt.MinTime.Truncate(interval)
			max := opt.MaxTime.Truncate(interval).Add(interval)

			// Determine the number of buckets by finding the time span and dividing by the interval.
			buckets := int64(max.Sub(min)) / int64(interval)
			if int(buckets) > e.MaxSelectBucketsN {
				return nil, stmt, fmt.Errorf("max-select-buckets limit exceeded: (%d/%d)", buckets, e.MaxSelectBucketsN)
			}
		}
	}

	// Create a set of iterators from a selection.
	itrs, err := influxql.Select(stmt, ic, &opt)
	if err != nil {
		return nil, stmt, err
	}

//.........这里部分代码省略.........

func (e *StatementExecutor) executeSelectStatement(stmt *influxql.SelectStatement, ctx *influxql.ExecutionContext) error {
	itrs, stmt, err := e.createIterators(stmt, ctx)
	if err != nil {
		return err
	}

	// Generate a row emitter from the iterator set.
	em := influxql.NewEmitter(itrs, stmt.TimeAscending(), ctx.ChunkSize)
	em.Columns = stmt.ColumnNames()
	em.OmitTime = stmt.OmitTime
	defer em.Close()

	// Emit rows to the results channel.
	var writeN int64
	var emitted bool

	var pointsWriter *BufferedPointsWriter
	if stmt.Target != nil {
		pointsWriter = NewBufferedPointsWriter(e.PointsWriter, stmt.Target.Measurement.Database, stmt.Target.Measurement.RetentionPolicy, 10000)
	}

	for {
		row, partial, err := em.Emit()
		if err != nil {
			return err
		} else if row == nil {
			// Check if the query was interrupted while emitting.
			select {
			case <-ctx.InterruptCh:
				return influxql.ErrQueryInterrupted
			default:
			}
			break
		}

		// Write points back into system for INTO statements.
		if stmt.Target != nil {
			if err := e.writeInto(pointsWriter, stmt, row); err != nil {
				return err
			}
			writeN += int64(len(row.Values))
			continue
		}

		result := &influxql.Result{
			StatementID: ctx.StatementID,
			Series:      []*models.Row{row},
			Partial:     partial,
		}

		// Send results or exit if closing.
		if err := ctx.Send(result); err != nil {
			return err
		}

		emitted = true
	}

	// Flush remaining points and emit write count if an INTO statement.
	if stmt.Target != nil {
		if err := pointsWriter.Flush(); err != nil {
			return err
		}

		var messages []*influxql.Message
		if ctx.ReadOnly {
			messages = append(messages, influxql.ReadOnlyWarning(stmt.String()))
		}

		return ctx.Send(&influxql.Result{
			StatementID: ctx.StatementID,
			Messages:    messages,
			Series: []*models.Row{{
				Name:    "result",
				Columns: []string{"time", "written"},
				Values:  [][]interface{}{{time.Unix(0, 0).UTC(), writeN}},
			}},
		})
	}

	// Always emit at least one result.
	if !emitted {
		return ctx.Send(&influxql.Result{
			StatementID: ctx.StatementID,
			Series:      make([]*models.Row, 0),
		})
	}

	return nil
}

func (e *StatementExecutor) executeShowTagValues(stmt *influxql.SelectStatement, ctx *influxql.ExecutionContext, store LocalTSDBStore) error {
	if stmt.Condition == nil {
		return errors.New("a condition is required")
	}

	source := stmt.Sources[0].(*influxql.Measurement)
	index := store.DatabaseIndex(source.Database)
	if index == nil {
		ctx.Results <- &influxql.Result{StatementID: ctx.StatementID, Series: make([]*models.Row, 0)}
		return nil
	}

	measurementExpr := influxql.CloneExpr(stmt.Condition)
	measurementExpr = influxql.Reduce(influxql.RewriteExpr(measurementExpr, func(e influxql.Expr) influxql.Expr {
		switch e := e.(type) {
		case *influxql.BinaryExpr:
			switch e.Op {
			case influxql.EQ, influxql.NEQ, influxql.EQREGEX, influxql.NEQREGEX:
				tag, ok := e.LHS.(*influxql.VarRef)
				if !ok || tag.Val != "_name" {
					return nil
				}
			}
		}
		return e
	}), nil)

	mms, ok, err := index.MeasurementsByExpr(measurementExpr)
	if err != nil {
		return err
	} else if !ok {
		mms = index.Measurements()
		sort.Sort(mms)
	}

	// If there are no measurements, return immediately.
	if len(mms) == 0 {
		ctx.Results <- &influxql.Result{StatementID: ctx.StatementID, Series: make([]*models.Row, 0)}
		return nil
	}

	filterExpr := influxql.CloneExpr(stmt.Condition)
	filterExpr = influxql.Reduce(influxql.RewriteExpr(filterExpr, func(e influxql.Expr) influxql.Expr {
		switch e := e.(type) {
		case *influxql.BinaryExpr:
			switch e.Op {
			case influxql.EQ, influxql.NEQ, influxql.EQREGEX, influxql.NEQREGEX:
				tag, ok := e.LHS.(*influxql.VarRef)
				if !ok || strings.HasPrefix(tag.Val, "_") {
					return nil
				}
			}
		}
		return e
	}), nil)

	var emitted bool
	columns := stmt.ColumnNames()
	for _, mm := range mms {
		ids, err := mm.SeriesIDsAllOrByExpr(filterExpr)
		if err != nil {
			return err
		}
		ss := mm.SeriesByIDSlice(ids)

		// Determine a list of keys from condition.
		keySet, ok, err := mm.TagKeysByExpr(stmt.Condition)
		if err != nil {
			return err
		}

		// Loop over all keys for each series.
		m := make(map[keyValue]struct{}, len(ss))
		for _, series := range ss {
			for key, value := range series.Tags {
				if !ok {
					// nop
				} else if _, exists := keySet[key]; !exists {
					continue
				}
				m[keyValue{key, value}] = struct{}{}
			}
		}

		// Move to next series if no key/values match.
		if len(m) == 0 {
			continue
		}

		// Sort key/value set.
		a := make([]keyValue, 0, len(m))
		for kv := range m {
			a = append(a, kv)
		}
		sort.Sort(keyValues(a))

		// Convert to result values.
		slab := make([]interface{}, len(a)*2)
		values := make([][]interface{}, len(a))
		for i, elem := range a {
//.........这里部分代码省略.........

func (e *StatementExecutor) executeSelectStatement(stmt *influxql.SelectStatement, ctx *influxql.ExecutionContext) error {
	// Handle SHOW TAG VALUES separately so it can be optimized.
	// https://github.com/influxdata/influxdb/issues/6233
	if source, ok := stmt.Sources[0].(*influxql.Measurement); ok && source.Name == "_tags" {
		// Use the optimized version only if we have direct access to the database.
		if store, ok := e.TSDBStore.(LocalTSDBStore); ok {
			return e.executeShowTagValues(stmt, ctx, store)
		}
	}

	// It is important to "stamp" this time so that everywhere we evaluate `now()` in the statement is EXACTLY the same `now`
	now := time.Now().UTC()
	opt := influxql.SelectOptions{InterruptCh: ctx.InterruptCh}

	// Replace instances of "now()" with the current time, and check the resultant times.
	nowValuer := influxql.NowValuer{Now: now}
	stmt.Condition = influxql.Reduce(stmt.Condition, &nowValuer)
	// Replace instances of "now()" with the current time in the dimensions.
	for _, d := range stmt.Dimensions {
		d.Expr = influxql.Reduce(d.Expr, &nowValuer)
	}

	var err error
	opt.MinTime, opt.MaxTime, err = influxql.TimeRange(stmt.Condition)
	if err != nil {
		return err
	}

	if opt.MaxTime.IsZero() {
		// In the case that we're executing a meta query where the user cannot
		// specify a time condition, then we expand the default max time
		// to the maximum possible value, to ensure that data where all points
		// are in the future are returned.
		if influxql.Sources(stmt.Sources).HasSystemSource() {
			opt.MaxTime = time.Unix(0, influxql.MaxTime).UTC()
		} else {
			opt.MaxTime = now
		}
	}
	if opt.MinTime.IsZero() {
		opt.MinTime = time.Unix(0, 0)
	}

	// Convert DISTINCT into a call.
	stmt.RewriteDistinct()

	// Remove "time" from fields list.
	stmt.RewriteTimeFields()

	// Create an iterator creator based on the shards in the cluster.
	ic, err := e.iteratorCreator(stmt, &opt)
	if err != nil {
		return err
	}

	// Expand regex sources to their actual source names.
	if stmt.Sources.HasRegex() {
		sources, err := ic.ExpandSources(stmt.Sources)
		if err != nil {
			return err
		}
		stmt.Sources = sources
	}

	// Rewrite wildcards, if any exist.
	tmp, err := stmt.RewriteFields(ic)
	if err != nil {
		return err
	}
	stmt = tmp

	if e.MaxSelectBucketsN > 0 && !stmt.IsRawQuery {
		interval, err := stmt.GroupByInterval()
		if err != nil {
			return err
		}

		if interval > 0 {
			// Determine the start and end time matched to the interval (may not match the actual times).
			min := opt.MinTime.Truncate(interval)
			max := opt.MaxTime.Truncate(interval).Add(interval)

			// Determine the number of buckets by finding the time span and dividing by the interval.
			buckets := int64(max.Sub(min)) / int64(interval)
			if int(buckets) > e.MaxSelectBucketsN {
				return fmt.Errorf("max select bucket count exceeded: %d buckets", buckets)
			}
		}
	}

	// Create a set of iterators from a selection.
	itrs, err := influxql.Select(stmt, ic, &opt)
	if err != nil {
		return err
	}

	if e.MaxSelectPointN > 0 {
		monitor := influxql.PointLimitMonitor(itrs, influxql.DefaultStatsInterval, e.MaxSelectPointN)
		ctx.Query.Monitor(monitor)
	}
//.........这里部分代码省略.........

func (e *StatementExecutor) executeSelectStatement(stmt *influxql.SelectStatement, ctx *influxql.ExecutionContext) error {
	// It is important to "stamp" this time so that everywhere we evaluate `now()` in the statement is EXACTLY the same `now`
	now := time.Now().UTC()
	opt := influxql.SelectOptions{InterruptCh: ctx.InterruptCh}

	// Replace instances of "now()" with the current time, and check the resultant times.
	stmt.Condition = influxql.Reduce(stmt.Condition, &influxql.NowValuer{Now: now})
	var err error
	opt.MinTime, opt.MaxTime, err = influxql.TimeRange(stmt.Condition)
	if err != nil {
		return err
	}

	if opt.MaxTime.IsZero() {
		opt.MaxTime = now
	}
	if opt.MinTime.IsZero() {
		opt.MinTime = time.Unix(0, 0)
	}

	// Convert DISTINCT into a call.
	stmt.RewriteDistinct()

	// Remove "time" from fields list.
	stmt.RewriteTimeFields()

	// Create an iterator creator based on the shards in the cluster.
	ic, err := e.iteratorCreator(stmt, &opt)
	if err != nil {
		return err
	}

	// Expand regex sources to their actual source names.
	if stmt.Sources.HasRegex() {
		sources, err := ic.ExpandSources(stmt.Sources)
		if err != nil {
			return err
		}
		stmt.Sources = sources
	}

	// Rewrite wildcards, if any exist.
	tmp, err := stmt.RewriteWildcards(ic)
	if err != nil {
		return err
	}
	stmt = tmp

	if e.MaxSelectBucketsN > 0 && !stmt.IsRawQuery {
		interval, err := stmt.GroupByInterval()
		if err != nil {
			return err
		}

		if interval > 0 {
			// Determine the start and end time matched to the interval (may not match the actual times).
			min := opt.MinTime.Truncate(interval)
			max := opt.MaxTime.Truncate(interval).Add(interval)

			// Determine the number of buckets by finding the time span and dividing by the interval.
			buckets := int64(max.Sub(min)) / int64(interval)
			if int(buckets) > e.MaxSelectBucketsN {
				return fmt.Errorf("max select bucket count exceeded: %d buckets", buckets)
			}
		}
	}

	// Create a set of iterators from a selection.
	itrs, err := influxql.Select(stmt, ic, &opt)
	if err != nil {
		return err
	}

	if e.MaxSelectPointN > 0 {
		monitor := influxql.PointLimitMonitor(itrs, influxql.DefaultStatsInterval, e.MaxSelectPointN)
		ctx.Query.Monitor(monitor)
	}

	// Generate a row emitter from the iterator set.
	em := influxql.NewEmitter(itrs, stmt.TimeAscending(), ctx.ChunkSize)
	em.Columns = stmt.ColumnNames()
	em.OmitTime = stmt.OmitTime
	defer em.Close()

	// Calculate initial stats across all iterators.
	stats := influxql.Iterators(itrs).Stats()
	if e.MaxSelectSeriesN > 0 && stats.SeriesN > e.MaxSelectSeriesN {
		return fmt.Errorf("max select series count exceeded: %d series", stats.SeriesN)
	}

	// Emit rows to the results channel.
	var writeN int64
	var emitted bool
	for {
		row := em.Emit()
		if row == nil {
			// Check if the query was interrupted while emitting.
			select {
			case <-ctx.InterruptCh:
				return influxql.ErrQueryInterrupted
//.........这里部分代码省略.........

// PlanSelect creates an execution plan for the given SelectStatement and returns an Executor.
func (q *QueryExecutor) PlanSelect(stmt *influxql.SelectStatement, chunkSize int) (Executor, error) {
	// It is important to "stamp" this time so that everywhere we evaluate `now()` in the statement is EXACTLY the same `now`
	now := time.Now().UTC()
	opt := influxql.SelectOptions{}

	// Replace instances of "now()" with the current time, and check the resultant times.
	stmt.Condition = influxql.Reduce(stmt.Condition, &influxql.NowValuer{Now: now})
	opt.MinTime, opt.MaxTime = influxql.TimeRange(stmt.Condition)
	if opt.MaxTime.IsZero() {
		opt.MaxTime = now
	}
	if opt.MinTime.IsZero() {
		opt.MinTime = time.Unix(0, 0)
	}

	// Expand regex sources to their actual source names.
	sources, err := q.Store.ExpandSources(stmt.Sources)
	if err != nil {
		return nil, err
	}
	stmt.Sources = sources

	// Convert DISTINCT into a call.
	stmt.RewriteDistinct()

	// Remove "time" from fields list.
	stmt.RewriteTimeFields()

	// Filter only shards that contain date range.
	shardIDs, err := q.MetaClient.ShardIDsByTimeRange(stmt.Sources, opt.MinTime, opt.MaxTime)
	if err != nil {
		return nil, err
	}
	shards := q.Store.Shards(shardIDs)

	// Rewrite wildcards, if any exist.
	tmp, err := stmt.RewriteWildcards(Shards(shards))
	if err != nil {
		return nil, err
	}
	stmt = tmp

	// Create a set of iterators from a selection.
	itrs, err := influxql.Select(stmt, Shards(shards), &opt)
	if err != nil {
		return nil, err
	}

	// Generate a row emitter from the iterator set.
	em := influxql.NewEmitter(itrs, stmt.TimeAscending())
	em.Columns = stmt.ColumnNames()
	em.OmitTime = stmt.OmitTime

	// Wrap emitter in an adapter to conform to the Executor interface.
	return (*emitterExecutor)(em), nil
}

func (e *QueryExecutor) executeSelectStatement(stmt *influxql.SelectStatement, chunkSize, statementID int, results chan *influxql.Result, closing <-chan struct{}) error {
	// It is important to "stamp" this time so that everywhere we evaluate `now()` in the statement is EXACTLY the same `now`
	now := time.Now().UTC()
	opt := influxql.SelectOptions{}

	// Replace instances of "now()" with the current time, and check the resultant times.
	stmt.Condition = influxql.Reduce(stmt.Condition, &influxql.NowValuer{Now: now})
	opt.MinTime, opt.MaxTime = influxql.TimeRange(stmt.Condition)
	if opt.MaxTime.IsZero() {
		opt.MaxTime = now
	}
	if opt.MinTime.IsZero() {
		opt.MinTime = time.Unix(0, 0)
	}

	// Convert DISTINCT into a call.
	stmt.RewriteDistinct()

	// Remove "time" from fields list.
	stmt.RewriteTimeFields()

	// Create an iterator creator based on the shards in the cluster.
	ic, err := e.iteratorCreator(stmt, &opt)
	if err != nil {
		return err
	}

	// Expand regex sources to their actual source names.
	if stmt.Sources.HasRegex() {
		sources, err := ic.ExpandSources(stmt.Sources)
		if err != nil {
			return err
		}
		stmt.Sources = sources
	}

	// Rewrite wildcards, if any exist.
	tmp, err := stmt.RewriteWildcards(ic)
	if err != nil {
		return err
	}
	stmt = tmp

	// Create a set of iterators from a selection.
	itrs, err := influxql.Select(stmt, ic, &opt)
	if err != nil {
		return err
	}

	// Generate a row emitter from the iterator set.
	em := influxql.NewEmitter(itrs, stmt.TimeAscending())
	em.Columns = stmt.ColumnNames()
	em.OmitTime = stmt.OmitTime
	defer em.Close()

	// Emit rows to the results channel.
	var writeN int64
	var emitted bool
	for {
		row := em.Emit()
		if row == nil {
			break
		}

		result := &influxql.Result{
			StatementID: statementID,
			Series:      []*models.Row{row},
		}

		// Write points back into system for INTO statements.
		if stmt.Target != nil {
			if err := e.writeInto(stmt, row); err != nil {
				return err
			}
			writeN += int64(len(row.Values))
			continue
		}

		// Send results or exit if closing.
		select {
		case <-closing:
			return nil
		case results <- result:
		}

		emitted = true
	}

	// Emit write count if an INTO statement.
	if stmt.Target != nil {
		results <- &influxql.Result{
			StatementID: statementID,
			Series: []*models.Row{{
				Name:    "result",
				Columns: []string{"time", "written"},
				Values:  [][]interface{}{{time.Unix(0, 0).UTC(), writeN}},
			}},
		}
		return nil
	}
//.........这里部分代码省略.........

func (e *StatementExecutor) executeSelectStatement(stmt *influxql.SelectStatement, ctx *influxql.ExecutionContext) error {
	// Handle SHOW TAG VALUES separately so it can be optimized.
	// https://github.com/influxdata/influxdb/issues/6233
	if source, ok := stmt.Sources[0].(*influxql.Measurement); ok && source.Name == "_tags" {
		// Use the optimized version only if we have direct access to the database.
		if store, ok := e.TSDBStore.(LocalTSDBStore); ok {
			return e.executeShowTagValues(stmt, ctx, store)
		}
	}

	itrs, stmt, err := e.createIterators(stmt, ctx)
	if err != nil {
		return err
	}

	// Generate a row emitter from the iterator set.
	em := influxql.NewEmitter(itrs, stmt.TimeAscending(), ctx.ChunkSize)
	em.Columns = stmt.ColumnNames()
	em.OmitTime = stmt.OmitTime
	defer em.Close()

	// Calculate initial stats across all iterators.
	stats := influxql.Iterators(itrs).Stats()
	if e.MaxSelectSeriesN > 0 && stats.SeriesN > e.MaxSelectSeriesN {
		return fmt.Errorf("max select series count exceeded: %d series", stats.SeriesN)
	}

	// Emit rows to the results channel.
	var writeN int64
	var emitted bool

	var pointsWriter *BufferedPointsWriter
	if stmt.Target != nil {
		pointsWriter = NewBufferedPointsWriter(e.PointsWriter, stmt.Target.Measurement.Database, stmt.Target.Measurement.RetentionPolicy, 10000)
	}

	for {
		row, err := em.Emit()
		if err != nil {
			return err
		} else if row == nil {
			// Check if the query was interrupted while emitting.
			select {
			case <-ctx.InterruptCh:
				return influxql.ErrQueryInterrupted
			default:
			}
			break
		}

		// Write points back into system for INTO statements.
		if stmt.Target != nil {
			if err := e.writeInto(pointsWriter, stmt, row); err != nil {
				return err
			}
			writeN += int64(len(row.Values))
			continue
		}

		result := &influxql.Result{
			StatementID: ctx.StatementID,
			Series:      []*models.Row{row},
		}

		// Send results or exit if closing.
		select {
		case <-ctx.InterruptCh:
			return influxql.ErrQueryInterrupted
		case ctx.Results <- result:
		}

		emitted = true
	}

	// Flush remaing points and emit write count if an INTO statement.
	if stmt.Target != nil {
		if err := pointsWriter.Flush(); err != nil {
			return err
		}

		var messages []*influxql.Message
		if ctx.ReadOnly {
			messages = append(messages, influxql.ReadOnlyWarning(stmt.String()))
		}

		ctx.Results <- &influxql.Result{
			StatementID: ctx.StatementID,
			Messages:    messages,
			Series: []*models.Row{{
				Name:    "result",
				Columns: []string{"time", "written"},
				Values:  [][]interface{}{{time.Unix(0, 0).UTC(), writeN}},
			}},
		}
		return nil
	}

	// Always emit at least one result.
	if !emitted {
		ctx.Results <- &influxql.Result{
//.........这里部分代码省略.........