Golang gobot.NewEventer函数代码示例

// NewAnalogSensorDriver returns a new AnalogSensorDriver with a polling interval of
// 10 Milliseconds given an AnalogReader, name and pin.
//
// Optinally accepts:
// 	time.Duration: Interval at which the AnalogSensor is polled for new information
//
// Adds the following API Commands:
// 	"Read" - See AnalogSensor.Read
func NewAnalogSensorDriver(a AnalogReader, name string, pin string, v ...time.Duration) *AnalogSensorDriver {
	d := &AnalogSensorDriver{
		name:       name,
		connection: a,
		pin:        pin,
		Eventer:    gobot.NewEventer(),
		Commander:  gobot.NewCommander(),
		interval:   10 * time.Millisecond,
		halt:       make(chan bool),
	}

	if len(v) > 0 {
		d.interval = v[0]
	}

	d.AddEvent(Data)
	d.AddEvent(Error)

	d.AddCommand("Read", func(params map[string]interface{}) interface{} {
		val, err := d.Read()
		return map[string]interface{}{"val": val, "err": err}
	})

	return d
}

// NewWiichuckDriver creates a WiichuckDriver with specified i2c interface and name.
//
// It adds the following events:
//	"z"- Gets triggered every interval amount of time if the z button is pressed
//	"c" - Gets triggered every interval amount of time if the c button is pressed
//	"joystick" - Gets triggered every "interval" amount of time if a joystick event occurred, you can access values x, y
//	"error" - Gets triggered whenever the WiichuckDriver encounters an error
func NewWiichuckDriver(a I2c, name string, v ...time.Duration) *WiichuckDriver {
	w := &WiichuckDriver{
		name:       name,
		connection: a,
		interval:   10 * time.Millisecond,
		pauseTime:  1 * time.Millisecond,
		Eventer:    gobot.NewEventer(),
		joystick: map[string]float64{
			"sy_origin": -1,
			"sx_origin": -1,
		},
		data: map[string]float64{
			"sx": 0,
			"sy": 0,
			"z":  0,
			"c":  0,
		},
	}

	if len(v) > 0 {
		w.interval = v[0]
	}

	w.AddEvent(Z)
	w.AddEvent(C)
	w.AddEvent(Joystick)
	w.AddEvent(Error)
	return w
}

// NewCameraDriver creates a new driver with specified name and source.
// It also creates a start function to either set camera as a File or Camera capture.
func NewCameraDriver(name string, source interface{}, v ...time.Duration) *CameraDriver {
	c := &CameraDriver{
		name:     name,
		Eventer:  gobot.NewEventer(),
		Source:   source,
		interval: 10 * time.Millisecond,
		start: func(c *CameraDriver) (err error) {
			switch v := c.Source.(type) {
			case string:
				c.camera = cv.NewFileCapture(v)
			case int:
				c.camera = cv.NewCameraCapture(v)
			default:
				return errors.New("Unknown camera source")
			}
			return
		},
	}

	if len(v) > 0 {
		c.interval = v[0]
	}

	c.AddEvent(Frame)

	return c
}

// NewPebbleDriver creates a new pebble driver with specified name
// Adds following events:
//		button - Sent when a pebble button is pressed
//		accel - Pebble watch acceleromenter data
//		tab - When a pebble watch tap event is detected
// And the following API commands:
//		"publish_event"
//		"send_notification"
//		"pending_message"
func NewPebbleDriver(adaptor *PebbleAdaptor, name string) *PebbleDriver {
	p := &PebbleDriver{
		name:       name,
		connection: adaptor,
		Messages:   []string{},
		Eventer:    gobot.NewEventer(),
		Commander:  gobot.NewCommander(),
	}

	p.AddEvent("button")
	p.AddEvent("accel")
	p.AddEvent("tap")

	p.AddCommand("publish_event", func(params map[string]interface{}) interface{} {
		p.PublishEvent(params["name"].(string), params["data"].(string))
		return nil
	})

	p.AddCommand("send_notification", func(params map[string]interface{}) interface{} {
		p.SendNotification(params["message"].(string))
		return nil
	})

	p.AddCommand("pending_message", func(params map[string]interface{}) interface{} {
		return p.PendingMessage()
	})

	return p
}

// New returns a new Client
func New() *Client {
	c := &Client{
		ProtocolVersion: "",
		FirmwareName:    "",
		connection:      nil,
		pins:            []Pin{},
		analogPins:      []int{},
		connected:       false,
		Eventer:         gobot.NewEventer(),
	}

	for _, s := range []string{
		"FirmwareQuery",
		"CapabilityQuery",
		"AnalogMappingQuery",
		"ProtocolVersion",
		"I2cReply",
		"StringData",
		"Error",
	} {
		c.AddEvent(s)
	}

	return c
}

// NewMCP23017Driver creates a new driver with specified name and i2c interface.
func NewMCP23017Driver(a I2c, name string, conf MCP23017Config, deviceAddress int, v ...time.Duration) *MCP23017Driver {
	m := &MCP23017Driver{
		name:            name,
		connection:      a,
		conf:            conf,
		mcp23017Address: deviceAddress,
		Commander:       gobot.NewCommander(),
		Eventer:         gobot.NewEventer(),
	}

	m.AddCommand("WriteGPIO", func(params map[string]interface{}) interface{} {
		pin := params["pin"].(float64)
		val := params["val"].(float64)
		port := params["port"].(string)
		return m.WriteGPIO(pin, val, port)
	})

	m.AddCommand("ReadGPIO", func(params map[string]interface{}) interface{} {
		pin := params["pin"].(float64)
		port := params["port"].(string)
		val, err := m.ReadGPIO(pin, port)
		return map[string]interface{}{"val": val, "err": err}
	})

	return m
}

func NewJenkinsconnectDriver(a *JenkinsconnectAdaptor, name string) *JenkinsconnectDriver {
	j := &JenkinsconnectDriver{
		name:       name,
		connection: a,
		Eventer:    gobot.NewEventer(),
		Commander:  gobot.NewCommander(),
	}

	j.AddEvent(JobResult)

	j.AddCommand("ParseResults", func(params map[string]interface{}) interface{} {
		var snapshot JobOutcomeSnapshot

		result := ParseJobState(params)
		if (JobOutcome{}) != result {
			fmt.Printf("Result: %v\n", result)
			lastOutcome, ok := jobStates[result.Name]
			if ok {
				fmt.Printf("Last outcome: %v\n", lastOutcome)
			}

			snapshot.Outcome = result
			snapshot.RanAt = time.Now()
			jobStates[result.Name] = snapshot
			gobot.Publish(j.Event(JobResult), result)
		}

		return result
	})

	return j
}

// NewBebopDriver creates an BebopDriver with specified name.
func NewBebopDriver(connection *BebopAdaptor, name string) *BebopDriver {
	d := &BebopDriver{
		name:       name,
		connection: connection,
		Eventer:    gobot.NewEventer(),
	}
	d.AddEvent("flying")
	return d
}

// NewArdroneDriver creates an ArdroneDriver with specified name.
//
// It add the following events:
//     'flying' - Sent when the device has taken off.
func NewArdroneDriver(connection *ArdroneAdaptor, name string) *ArdroneDriver {
	d := &ArdroneDriver{
		name:       name,
		connection: connection,
		Eventer:    gobot.NewEventer(),
	}
	d.AddEvent("flying")
	return d
}

// NewBLEDeviceInformationDriver creates a BLEDeviceInformationDriver
// by name
func NewBLEDeviceInformationDriver(a *BLEClientAdaptor, name string) *BLEDeviceInformationDriver {
	n := &BLEDeviceInformationDriver{
		name:       name,
		connection: a,
		Eventer:    gobot.NewEventer(),
	}

	return n
}

// NewSparkCoreAdaptor creates new spark core adaptor with deviceId and accessToken
// using api.spark.io server as default
func NewSparkCoreAdaptor(name string, deviceID string, accessToken string) *SparkCoreAdaptor {
	return &SparkCoreAdaptor{
		name:        name,
		DeviceID:    deviceID,
		AccessToken: accessToken,
		APIServer:   "https://api.spark.io",
		Eventer:     gobot.NewEventer(),
	}
}

// NewBLEBatteryDriver creates a BLEBatteryDriver by name
func NewBLEBatteryDriver(a *BLEClientAdaptor, name string) *BLEBatteryDriver {
	n := &BLEBatteryDriver{
		name:       name,
		connection: a,
		Eventer:    gobot.NewEventer(),
	}

	return n
}

// NewSpheroOllieDriver creates a SpheroOllieDriver by name
func NewSpheroOllieDriver(a *BLEClientAdaptor, name string) *SpheroOllieDriver {
	n := &SpheroOllieDriver{
		name:          name,
		connection:    a,
		Eventer:       gobot.NewEventer(),
		packetChannel: make(chan *packet, 1024),
	}

	return n
}

// NewLeapMotionDriver creates a new leap motion driver with specified name
//
// Adds the following events:
//		"message" - Gets triggered when receiving a message from leap motion
func NewLeapMotionDriver(a *LeapMotionAdaptor, name string) *LeapMotionDriver {
	l := &LeapMotionDriver{
		name:       name,
		connection: a,
		Eventer:    gobot.NewEventer(),
	}

	l.AddEvent("message")
	return l
}

func NewAudioDriver(a *AudioAdaptor, name string, filename string) *AudioDriver {
	d := &AudioDriver{
		name:       name,
		connection: a,
		interval:   500 * time.Millisecond,
		filename:   filename,
		halt:       make(chan bool, 0),
		Eventer:    gobot.NewEventer(),
		Commander:  gobot.NewCommander(),
	}
	return d
}