Golang util.ApplyOomScoreAdj函数代码示例

// Run runs the specified ProxyServer.  This should never exit.
func (s *ProxyServer) Run(_ []string) error {
	if err := util.ApplyOomScoreAdj(0, s.OOMScoreAdj); err != nil {
		glog.Info(err)
	}

	serviceConfig := config.NewServiceConfig()
	endpointsConfig := config.NewEndpointsConfig()

	protocol := iptables.ProtocolIpv4
	if net.IP(s.BindAddress).To4() == nil {
		protocol = iptables.ProtocolIpv6
	}
	loadBalancer := proxy.NewLoadBalancerRR()
	proxier := proxy.NewProxier(loadBalancer, net.IP(s.BindAddress), iptables.New(exec.New(), protocol))
	if proxier == nil {
		glog.Fatalf("failed to create proxier, aborting")
	}

	// Wire proxier to handle changes to services
	serviceConfig.RegisterHandler(proxier)
	// And wire loadBalancer to handle changes to endpoints to services
	endpointsConfig.RegisterHandler(loadBalancer)

	// Note: RegisterHandler() calls need to happen before creation of Sources because sources
	// only notify on changes, and the initial update (on process start) may be lost if no handlers
	// are registered yet.

	// define api config source
	if s.ClientConfig.Host != "" {
		glog.Infof("Using API calls to get config %v", s.ClientConfig.Host)
		client, err := client.New(&s.ClientConfig)
		if err != nil {
			glog.Fatalf("Invalid API configuration: %v", err)
		}
		config.NewSourceAPI(
			client.Services(api.NamespaceAll),
			client.Endpoints(api.NamespaceAll),
			30*time.Second,
			serviceConfig.Channel("api"),
			endpointsConfig.Channel("api"),
		)
	}

	if s.HealthzPort > 0 {
		go util.Forever(func() {
			err := http.ListenAndServe(s.BindAddress.String()+":"+strconv.Itoa(s.HealthzPort), nil)
			if err != nil {
				glog.Errorf("Starting health server failed: %v", err)
			}
		}, 5*time.Second)
	}

	// Just loop forever for now...
	proxier.SyncLoop()
	return nil
}

func main() {
	flag.Parse()
	util.InitLogs()
	defer util.FlushLogs()
	rand.Seed(time.Now().UTC().UnixNano())

	verflag.PrintAndExitIfRequested()

	setupRunOnce()

	if err := util.ApplyOomScoreAdj(*oomScoreAdj); err != nil {
		glog.Info(err)
	}

	client, err := standalone.GetAPIServerClient(*authPath, apiServerList)
	if err != nil && len(apiServerList) > 0 {
		glog.Warningf("No API client: %v", err)
	}

	kcfg := standalone.KubeletConfig{
		Address:                 address,
		AllowPrivileged:         *allowPrivileged,
		HostnameOverride:        *hostnameOverride,
		RootDirectory:           *rootDirectory,
		ConfigFile:              *config,
		ManifestURL:             *manifestURL,
		FileCheckFrequency:      *fileCheckFrequency,
		HttpCheckFrequency:      *httpCheckFrequency,
		NetworkContainerImage:   *networkContainerImage,
		SyncFrequency:           *syncFrequency,
		RegistryPullQPS:         *registryPullQPS,
		RegistryBurst:           *registryBurst,
		MinimumGCAge:            *minimumGCAge,
		MaxContainerCount:       *maxContainerCount,
		ClusterDomain:           *clusterDomain,
		ClusterDNS:              clusterDNS,
		Runonce:                 *runonce,
		Port:                    *port,
		CAdvisorPort:            *cAdvisorPort,
		EnableServer:            *enableServer,
		EnableDebuggingHandlers: *enableDebuggingHandlers,
		DockerClient:            util.ConnectToDockerOrDie(*dockerEndpoint),
		KubeClient:              client,
		EtcdClient:              kubelet.EtcdClientOrDie(etcdServerList, *etcdConfigFile),
		MasterServiceNamespace:  *masterServiceNamespace,
	}

	standalone.RunKubelet(&kcfg)
	// runs forever
	select {}
}

// Ensures that the Docker daemon is in the desired container.
func ensureDockerInContainer(cadvisor cadvisor.Interface, oomScoreAdj int, manager *fs.Manager) error {
	// What container is Docker in?
	out, err := exec.Command("pidof", "docker").Output()
	if err != nil {
		return fmt.Errorf("failed to find pid of Docker container: %v", err)
	}

	// The output of pidof is a list of pids.
	// Docker may be forking and thus there would be more than one result.
	pids := []int{}
	for _, pidStr := range strings.Split(strings.TrimSpace(string(out)), " ") {
		pid, err := strconv.Atoi(pidStr)
		if err != nil {
			continue
		}
		pids = append(pids, pid)
	}

	// Move if the pid is not already in the desired container.
	errs := []error{}
	for _, pid := range pids {
		cont, err := getContainer(pid)
		if err != nil {
			errs = append(errs, fmt.Errorf("failed to find container of PID %d: %v", pid, err))
		}

		if cont != manager.Cgroups.Name {
			err = manager.Apply(pid)
			if err != nil {
				errs = append(errs, fmt.Errorf("failed to move PID %d (in %q) to %q", pid, cont, manager.Cgroups.Name))
			}
		}

		// Also apply oom_score_adj to processes
		if err := util.ApplyOomScoreAdj(pid, oomScoreAdj); err != nil {
			errs = append(errs, fmt.Errorf("failed to apply oom score %d to PID %d", oomScoreAdj, pid))
		}
	}

	return errors.NewAggregate(errs)
}

// Run runs the specified KubeletServer.  This should never exit.
func (s *KubeletServer) Run(_ []string) error {
	util.ReallyCrash = s.ReallyCrashForTesting
	rand.Seed(time.Now().UTC().UnixNano())

	// TODO(vmarmol): Do this through container config.
	if err := util.ApplyOomScoreAdj(0, s.OOMScoreAdj); err != nil {
		glog.Warning(err)
	}

	var apiclient *client.Client
	clientConfig, err := s.CreateAPIServerClientConfig()
	if err == nil {
		apiclient, err = client.New(clientConfig)
	}
	if err != nil && len(s.APIServerList) > 0 {
		glog.Warningf("No API client: %v", err)
	}

	glog.V(2).Infof("Using root directory: %v", s.RootDirectory)

	credentialprovider.SetPreferredDockercfgPath(s.RootDirectory)

	cadvisorInterface, err := cadvisor.New(s.CadvisorPort)
	if err != nil {
		return err
	}

	imageGCPolicy := kubelet.ImageGCPolicy{
		HighThresholdPercent: s.ImageGCHighThresholdPercent,
		LowThresholdPercent:  s.ImageGCLowThresholdPercent,
	}

	diskSpacePolicy := kubelet.DiskSpacePolicy{
		DockerFreeDiskMB: s.LowDiskSpaceThresholdMB,
		RootFreeDiskMB:   s.LowDiskSpaceThresholdMB,
	}
	cloud := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
	glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", s.CloudProvider, s.CloudConfigFile)

	hostNetworkSources, err := kubelet.GetValidatedSources(strings.Split(s.HostNetworkSources, ","))
	if err != nil {
		return err
	}

	tlsOptions, err := s.InitializeTLS()
	if err != nil {
		return err
	}

	mounter := mount.New()
	if s.Containerized {
		glog.V(2).Info("Running kubelet in containerized mode (experimental)")
		mounter = &mount.NsenterMounter{}
	}

	var dockerExecHandler dockertools.ExecHandler
	switch s.DockerExecHandlerName {
	case "native":
		dockerExecHandler = &dockertools.NativeExecHandler{}
	case "nsenter":
		dockerExecHandler = &dockertools.NsenterExecHandler{}
	default:
		glog.Warningf("Unknown Docker exec handler %q; defaulting to native", s.DockerExecHandlerName)
		dockerExecHandler = &dockertools.NativeExecHandler{}
	}

	kcfg := KubeletConfig{
		Address:                        s.Address,
		AllowPrivileged:                s.AllowPrivileged,
		HostNetworkSources:             hostNetworkSources,
		HostnameOverride:               s.HostnameOverride,
		RootDirectory:                  s.RootDirectory,
		ConfigFile:                     s.Config,
		ManifestURL:                    s.ManifestURL,
		FileCheckFrequency:             s.FileCheckFrequency,
		HTTPCheckFrequency:             s.HTTPCheckFrequency,
		PodInfraContainerImage:         s.PodInfraContainerImage,
		SyncFrequency:                  s.SyncFrequency,
		RegistryPullQPS:                s.RegistryPullQPS,
		RegistryBurst:                  s.RegistryBurst,
		MinimumGCAge:                   s.MinimumGCAge,
		MaxPerPodContainerCount:        s.MaxPerPodContainerCount,
		MaxContainerCount:              s.MaxContainerCount,
		RegisterNode:                   s.RegisterNode,
		StandaloneMode:                 (len(s.APIServerList) == 0),
		ClusterDomain:                  s.ClusterDomain,
		ClusterDNS:                     s.ClusterDNS,
		Runonce:                        s.RunOnce,
		Port:                           s.Port,
		ReadOnlyPort:                   s.ReadOnlyPort,
		CadvisorInterface:              cadvisorInterface,
		EnableServer:                   s.EnableServer,
		EnableDebuggingHandlers:        s.EnableDebuggingHandlers,
		DockerClient:                   dockertools.ConnectToDockerOrDie(s.DockerEndpoint),
		KubeClient:                     apiclient,
		MasterServiceNamespace:         s.MasterServiceNamespace,
		VolumePlugins:                  ProbeVolumePlugins(),
		NetworkPlugins:                 ProbeNetworkPlugins(),
		NetworkPluginName:              s.NetworkPluginName,
//.........这里部分代码省略.........

// Run runs the specified KubeletConfig and fills out any config that is not defined.  This should never exit.
func (s *KubeletServer) Run(kcfg *KubeletConfig) error {
	if kcfg == nil {
		cfg, err := s.KubeletConfig()
		if err != nil {
			return err
		}
		kcfg = cfg
	}
	if kcfg.KubeClient == nil {
		client, err := s.createAPIServerClient()
		if err != nil && len(s.APIServerList) > 0 {
			glog.Warningf("No API client: %v", err)
		}
		kcfg.KubeClient = client
	}

	if kcfg.DockerClient == nil {
		kcfg.DockerClient = dockertools.ConnectToDockerOrDie(s.DockerEndpoint)
	}

	if kcfg.CadvisorInterface == nil {
		cadvisorInterface, err := cadvisor.New(s.CadvisorPort)
		if err != nil {
			return err
		}
		kcfg.CadvisorInterface = cadvisorInterface
	}

	if kcfg.Cloud == nil && s.CloudProvider != "" {
		cloud, err := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
		if err != nil {
			return err
		}
		glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", s.CloudProvider, s.CloudConfigFile)
		kcfg.Cloud = cloud
	}

	util.ReallyCrash = s.ReallyCrashForTesting
	rand.Seed(time.Now().UTC().UnixNano())

	// TODO(vmarmol): Do this through container config.
	if err := util.ApplyOomScoreAdj(0, s.OOMScoreAdj); err != nil {
		glog.Warning(err)
	}

	glog.V(2).Infof("Using root directory: %v", s.RootDirectory)

	credentialprovider.SetPreferredDockercfgPath(s.RootDirectory)

	if err := RunKubelet(kcfg, nil); err != nil {
		return err
	}

	if s.HealthzPort > 0 {
		healthz.DefaultHealthz()
		go util.Forever(func() {
			err := http.ListenAndServe(net.JoinHostPort(s.HealthzBindAddress.String(), strconv.Itoa(s.HealthzPort)), nil)
			if err != nil {
				glog.Errorf("Starting health server failed: %v", err)
			}
		}, 5*time.Second)
	}

	if s.RunOnce {
		return nil
	}

	// run forever
	select {}
}

// Run runs the specified KubeletServer.  This should never exit.
func (s *KubeletServer) Run(_ []string) error {
	util.ReallyCrash = s.ReallyCrashForTesting
	rand.Seed(time.Now().UTC().UnixNano())

	// TODO(vmarmol): Do this through container config.
	if err := util.ApplyOomScoreAdj(0, s.OOMScoreAdj); err != nil {
		glog.Info(err)
	}

	client, err := s.createAPIServerClient()
	if err != nil && len(s.APIServerList) > 0 {
		glog.Warningf("No API client: %v", err)
	}

	glog.Infof("Using root directory: %v", s.RootDirectory)

	credentialprovider.SetPreferredDockercfgPath(s.RootDirectory)

	cadvisorInterface, err := cadvisor.New(s.CadvisorPort)
	if err != nil {
		return err
	}

	imageGCPolicy := kubelet.ImageGCPolicy{
		HighThresholdPercent: s.ImageGCHighThresholdPercent,
		LowThresholdPercent:  s.ImageGCLowThresholdPercent,
	}

	cloud := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
	glog.Infof("Successfully initialized cloud provider: %q from the config file: %q\n", s.CloudProvider, s.CloudConfigFile)

	hostNetworkSources, err := kubelet.GetValidatedSources(strings.Split(s.HostNetworkSources, ","))
	if err != nil {
		return err
	}

	if s.TLSCertFile == "" && s.TLSPrivateKeyFile == "" {
		s.TLSCertFile = path.Join(s.CertDirectory, "kubelet.crt")
		s.TLSPrivateKeyFile = path.Join(s.CertDirectory, "kubelet.key")
		if err := util.GenerateSelfSignedCert(util.GetHostname(s.HostnameOverride), s.TLSCertFile, s.TLSPrivateKeyFile); err != nil {
			glog.Fatalf("Unable to generate self signed cert: %v", err)
		}
		glog.Infof("Using self-signed cert (%s, %s)", s.TLSCertFile, s.TLSPrivateKeyFile)
	}
	tlsOptions := &kubelet.TLSOptions{
		Config: &tls.Config{
			// Change default from SSLv3 to TLSv1.0 (because of POODLE vulnerability).
			MinVersion: tls.VersionTLS10,
			// Populate PeerCertificates in requests, but don't yet reject connections without certificates.
			ClientAuth: tls.RequestClientCert,
		},
		CertFile: s.TLSCertFile,
		KeyFile:  s.TLSPrivateKeyFile,
	}

	kcfg := KubeletConfig{
		Address:                        s.Address,
		AllowPrivileged:                s.AllowPrivileged,
		HostNetworkSources:             hostNetworkSources,
		HostnameOverride:               s.HostnameOverride,
		RootDirectory:                  s.RootDirectory,
		ConfigFile:                     s.Config,
		ManifestURL:                    s.ManifestURL,
		FileCheckFrequency:             s.FileCheckFrequency,
		HTTPCheckFrequency:             s.HTTPCheckFrequency,
		PodInfraContainerImage:         s.PodInfraContainerImage,
		SyncFrequency:                  s.SyncFrequency,
		RegistryPullQPS:                s.RegistryPullQPS,
		RegistryBurst:                  s.RegistryBurst,
		MinimumGCAge:                   s.MinimumGCAge,
		MaxPerPodContainerCount:        s.MaxPerPodContainerCount,
		MaxContainerCount:              s.MaxContainerCount,
		ClusterDomain:                  s.ClusterDomain,
		ClusterDNS:                     s.ClusterDNS,
		Runonce:                        s.RunOnce,
		Port:                           s.Port,
		ReadOnlyPort:                   s.ReadOnlyPort,
		CadvisorInterface:              cadvisorInterface,
		EnableServer:                   s.EnableServer,
		EnableDebuggingHandlers:        s.EnableDebuggingHandlers,
		DockerClient:                   dockertools.ConnectToDockerOrDie(s.DockerEndpoint),
		KubeClient:                     client,
		MasterServiceNamespace:         s.MasterServiceNamespace,
		VolumePlugins:                  ProbeVolumePlugins(),
		NetworkPlugins:                 ProbeNetworkPlugins(),
		NetworkPluginName:              s.NetworkPluginName,
		StreamingConnectionIdleTimeout: s.StreamingConnectionIdleTimeout,
		TLSOptions:                     tlsOptions,
		ImageGCPolicy:                  imageGCPolicy,
		Cloud:                          cloud,
		NodeStatusUpdateFrequency: s.NodeStatusUpdateFrequency,
		ResourceContainer:         s.ResourceContainer,
	}

	RunKubelet(&kcfg, nil)

	if s.HealthzPort > 0 {
		healthz.DefaultHealthz()
		go util.Forever(func() {
//.........这里部分代码省略.........

// Run runs the specified KubeletExecutorServer.
func (s *KubeletExecutorServer) Run(hks hyperkube.Interface, _ []string) error {
	rand.Seed(time.Now().UTC().UnixNano())

	if err := util.ApplyOomScoreAdj(0, s.OOMScoreAdj); err != nil {
		log.Info(err)
	}

	// derive the executor cgroup and use it as docker cgroup root
	mesosCgroup := findMesosCgroup(s.cgroupPrefix)
	s.cgroupRoot = mesosCgroup
	s.SystemContainer = mesosCgroup
	s.ResourceContainer = mesosCgroup
	log.V(2).Infof("passing cgroup %q to the kubelet as cgroup root", s.CgroupRoot)

	// create apiserver client
	var apiclient *client.Client
	clientConfig, err := s.CreateAPIServerClientConfig()
	if err == nil {
		apiclient, err = client.New(clientConfig)
	}
	if err != nil {
		// required for k8sm since we need to send api.Binding information
		// back to the apiserver
		log.Fatalf("No API client: %v", err)
	}

	log.Infof("Using root directory: %v", s.RootDirectory)
	credentialprovider.SetPreferredDockercfgPath(s.RootDirectory)

	shutdownCloser, err := s.syncExternalShutdownWatcher()
	if err != nil {
		return err
	}

	cadvisorInterface, err := cadvisor.New(s.CadvisorPort)
	if err != nil {
		return err
	}

	imageGCPolicy := kubelet.ImageGCPolicy{
		HighThresholdPercent: s.ImageGCHighThresholdPercent,
		LowThresholdPercent:  s.ImageGCLowThresholdPercent,
	}

	diskSpacePolicy := kubelet.DiskSpacePolicy{
		DockerFreeDiskMB: s.LowDiskSpaceThresholdMB,
		RootFreeDiskMB:   s.LowDiskSpaceThresholdMB,
	}

	//TODO(jdef) intentionally NOT initializing a cloud provider here since:
	//(a) the kubelet doesn't actually use it
	//(b) we don't need to create N-kubelet connections to zookeeper for no good reason
	//cloud := cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
	//log.Infof("Successfully initialized cloud provider: %q from the config file: %q\n", s.CloudProvider, s.CloudConfigFile)

	hostNetworkSources, err := kubelet.GetValidatedSources(strings.Split(s.HostNetworkSources, ","))
	if err != nil {
		return err
	}

	tlsOptions, err := s.InitializeTLS()
	if err != nil {
		return err
	}
	mounter := mount.New()
	if s.Containerized {
		log.V(2).Info("Running kubelet in containerized mode (experimental)")
		mounter = &mount.NsenterMounter{}
	}

	var dockerExecHandler dockertools.ExecHandler
	switch s.DockerExecHandlerName {
	case "native":
		dockerExecHandler = &dockertools.NativeExecHandler{}
	case "nsenter":
		dockerExecHandler = &dockertools.NsenterExecHandler{}
	default:
		log.Warningf("Unknown Docker exec handler %q; defaulting to native", s.DockerExecHandlerName)
		dockerExecHandler = &dockertools.NativeExecHandler{}
	}

	kcfg := app.KubeletConfig{
		Address:            s.Address,
		AllowPrivileged:    s.AllowPrivileged,
		HostNetworkSources: hostNetworkSources,
		HostnameOverride:   s.HostnameOverride,
		RootDirectory:      s.RootDirectory,
		// ConfigFile: ""
		// ManifestURL: ""
		FileCheckFrequency: s.FileCheckFrequency,
		// HTTPCheckFrequency
		PodInfraContainerImage:  s.PodInfraContainerImage,
		SyncFrequency:           s.SyncFrequency,
		RegistryPullQPS:         s.RegistryPullQPS,
		RegistryBurst:           s.RegistryBurst,
		MinimumGCAge:            s.MinimumGCAge,
		MaxPerPodContainerCount: s.MaxPerPodContainerCount,
		MaxContainerCount:       s.MaxContainerCount,
		RegisterNode:            s.RegisterNode,
//.........这里部分代码省略.........

func main() {
	util.InitFlags()
	util.InitLogs()
	defer util.FlushLogs()

	if err := util.ApplyOomScoreAdj(*oomScoreAdj); err != nil {
		glog.Info(err)
	}

	verflag.PrintAndExitIfRequested()

	serviceConfig := config.NewServiceConfig()
	endpointsConfig := config.NewEndpointsConfig()

	protocol := iptables.ProtocolIpv4
	if net.IP(bindAddress).To4() == nil {
		protocol = iptables.ProtocolIpv6
	}
	loadBalancer := proxy.NewLoadBalancerRR()
	proxier := proxy.NewProxier(loadBalancer, net.IP(bindAddress), iptables.New(exec.New(), protocol))
	if proxier == nil {
		glog.Fatalf("failed to create proxier, aborting")
	}
	// Wire proxier to handle changes to services
	serviceConfig.RegisterHandler(proxier)
	// And wire loadBalancer to handle changes to endpoints to services
	endpointsConfig.RegisterHandler(loadBalancer)

	// Note: RegisterHandler() calls need to happen before creation of Sources because sources
	// only notify on changes, and the initial update (on process start) may be lost if no handlers
	// are registered yet.

	// define api config source
	if clientConfig.Host != "" {
		glog.Infof("Using api calls to get config %v", clientConfig.Host)
		client, err := client.New(clientConfig)
		if err != nil {
			glog.Fatalf("Invalid API configuration: %v", err)
		}
		config.NewSourceAPI(
			client.Services(api.NamespaceAll),
			client.Endpoints(api.NamespaceAll),
			30*time.Second,
			serviceConfig.Channel("api"),
			endpointsConfig.Channel("api"),
		)
	} else {

		var etcdClient *etcd.Client

		// Set up etcd client
		if len(etcdServerList) > 0 {
			// Set up logger for etcd client
			etcd.SetLogger(util.NewLogger("etcd "))
			etcdClient = etcd.NewClient(etcdServerList)
		} else if *etcdConfigFile != "" {
			// Set up logger for etcd client
			etcd.SetLogger(util.NewLogger("etcd "))
			var err error
			etcdClient, err = etcd.NewClientFromFile(*etcdConfigFile)

			if err != nil {
				glog.Fatalf("Error with etcd config file: %v", err)
			}
		}

		// Create a configuration source that handles configuration from etcd.
		if etcdClient != nil {
			glog.Infof("Using etcd servers %v", etcdClient.GetCluster())

			config.NewConfigSourceEtcd(etcdClient,
				serviceConfig.Channel("etcd"),
				endpointsConfig.Channel("etcd"))
		}
	}

	if *healthz_port > 0 {
		go util.Forever(func() {
			err := http.ListenAndServe(bindAddress.String()+":"+strconv.Itoa(*healthz_port), nil)
			if err != nil {
				glog.Errorf("Starting health server failed: %v", err)
			}
		}, 5*time.Second)
	}

	// Just loop forever for now...
	proxier.SyncLoop()
}

// Run runs the specified ProxyServer.  This should never exit.
func (s *ProxyServer) Run(_ []string) error {
	// TODO(vmarmol): Use container config for this.
	if err := util.ApplyOomScoreAdj(0, s.OOMScoreAdj); err != nil {
		glog.Info(err)
	}

	// Run in its own container.
	if err := util.RunInResourceContainer(s.ResourceContainer); err != nil {
		glog.Warningf("Failed to start in resource-only container %q: %v", s.ResourceContainer, err)
	} else {
		glog.Infof("Running in resource-only container %q", s.ResourceContainer)
	}

	serviceConfig := config.NewServiceConfig()
	endpointsConfig := config.NewEndpointsConfig()

	protocol := iptables.ProtocolIpv4
	if net.IP(s.BindAddress).To4() == nil {
		protocol = iptables.ProtocolIpv6
	}
	loadBalancer := proxy.NewLoadBalancerRR()
	proxier := proxy.NewProxier(loadBalancer, net.IP(s.BindAddress), iptables.New(exec.New(), protocol))
	if proxier == nil {
		glog.Fatalf("failed to create proxier, aborting")
	}

	// Wire proxier to handle changes to services
	serviceConfig.RegisterHandler(proxier)
	// And wire loadBalancer to handle changes to endpoints to services
	endpointsConfig.RegisterHandler(loadBalancer)

	// Note: RegisterHandler() calls need to happen before creation of Sources because sources
	// only notify on changes, and the initial update (on process start) may be lost if no handlers
	// are registered yet.

	// define api config source
	if s.Kubeconfig == "" && s.Master == "" {
		glog.Warningf("Neither --kubeconfig nor --master was specified.  Using default API client.  This might not work.")
	}

	// This creates a client, first loading any specified kubeconfig
	// file, and then overriding the Master flag, if non-empty.
	kubeconfig, err := clientcmd.NewNonInteractiveDeferredLoadingClientConfig(
		&clientcmd.ClientConfigLoadingRules{ExplicitPath: s.Kubeconfig},
		&clientcmd.ConfigOverrides{ClusterInfo: clientcmdapi.Cluster{Server: s.Master}}).ClientConfig()
	if err != nil {
		return err
	}

	client, err := client.New(kubeconfig)
	if err != nil {
		glog.Fatalf("Invalid API configuration: %v", err)
	}

	config.NewSourceAPI(
		client.Services(api.NamespaceAll),
		client.Endpoints(api.NamespaceAll),
		30*time.Second,
		serviceConfig.Channel("api"),
		endpointsConfig.Channel("api"),
	)

	if s.HealthzPort > 0 {
		go util.Forever(func() {
			err := http.ListenAndServe(s.HealthzBindAddress.String()+":"+strconv.Itoa(s.HealthzPort), nil)
			if err != nil {
				glog.Errorf("Starting health server failed: %v", err)
			}
		}, 5*time.Second)
	}

	// Just loop forever for now...
	proxier.SyncLoop()
	return nil
}

func main() {
	util.InitFlags()
	util.InitLogs()
	util.ReallyCrash = *reallyCrashForTesting
	defer util.FlushLogs()
	rand.Seed(time.Now().UTC().UnixNano())

	verflag.PrintAndExitIfRequested()

	// Cluster creation scripts support both kubernetes versions that 1) support kublet watching
	// apiserver for pods, and 2) ones that don't. So they ca set both --etcd_servers and
	// --api_servers.  The current code will ignore the --etcd_servers flag, while older kubelet
	// code will use the --etd_servers flag for pods, and use --api_servers for event publising.
	//
	// TODO(erictune): convert all cloud provider scripts and Google Container Engine to
	// use only --api_servers, then delete --etcd_servers flag and the resulting dead code.
	if len(etcdServerList) > 0 && len(apiServerList) > 0 {
		glog.Infof("Both --etcd_servers and --api_servers are set.  Not using etcd source.")
		etcdServerList = util.StringList{}
	}

	setupRunOnce()

	if err := util.ApplyOomScoreAdj(*oomScoreAdj); err != nil {
		glog.Info(err)
	}

	client, err := standalone.GetAPIServerClient(*authPath, apiServerList)
	if err != nil && len(apiServerList) > 0 {
		glog.Warningf("No API client: %v", err)
	}

	kcfg := standalone.KubeletConfig{
		Address:                 address,
		AllowPrivileged:         *allowPrivileged,
		HostnameOverride:        *hostnameOverride,
		RootDirectory:           *rootDirectory,
		ConfigFile:              *config,
		ManifestURL:             *manifestURL,
		FileCheckFrequency:      *fileCheckFrequency,
		HttpCheckFrequency:      *httpCheckFrequency,
		NetworkContainerImage:   *networkContainerImage,
		SyncFrequency:           *syncFrequency,
		RegistryPullQPS:         *registryPullQPS,
		RegistryBurst:           *registryBurst,
		MinimumGCAge:            *minimumGCAge,
		MaxContainerCount:       *maxContainerCount,
		ClusterDomain:           *clusterDomain,
		ClusterDNS:              clusterDNS,
		Runonce:                 *runonce,
		Port:                    *port,
		CAdvisorPort:            *cAdvisorPort,
		EnableServer:            *enableServer,
		EnableDebuggingHandlers: *enableDebuggingHandlers,
		DockerClient:            util.ConnectToDockerOrDie(*dockerEndpoint),
		KubeClient:              client,
		EtcdClient:              kubelet.EtcdClientOrDie(etcdServerList, *etcdConfigFile),
		MasterServiceNamespace:  *masterServiceNamespace,
		VolumePlugins:           app.ProbeVolumePlugins(),
	}

	standalone.RunKubelet(&kcfg)
	// runs forever
	select {}
}

// Run runs the specified KubeletServer.  This should never exit.
func (s *KubeletServer) Run(_ []string) error {
	util.ReallyCrash = s.ReallyCrashForTesting
	rand.Seed(time.Now().UTC().UnixNano())

	if err := util.ApplyOomScoreAdj(0, s.OOMScoreAdj); err != nil {
		glog.Info(err)
	}

	client, err := s.createAPIServerClient()
	if err != nil && len(s.APIServerList) > 0 {
		glog.Warningf("No API client: %v", err)
	}

	glog.Infof("Using root directory: %v", s.RootDirectory)

	credentialprovider.SetPreferredDockercfgPath(s.RootDirectory)

	cadvisorInterface, err := cadvisor.New(s.CadvisorPort)
	if err != nil {
		return err
	}

	imageGCPolicy := kubelet.ImageGCPolicy{
		HighThresholdPercent: s.ImageGCHighThresholdPercent,
		LowThresholdPercent:  s.ImageGCLowThresholdPercent,
	}
	kcfg := KubeletConfig{
		Address:                        s.Address,
		AllowPrivileged:                s.AllowPrivileged,
		HostnameOverride:               s.HostnameOverride,
		RootDirectory:                  s.RootDirectory,
		ConfigFile:                     s.Config,
		ManifestURL:                    s.ManifestURL,
		StatusUpdateFrequency:          s.StatusUpdateFrequency,
		FileCheckFrequency:             s.FileCheckFrequency,
		HTTPCheckFrequency:             s.HTTPCheckFrequency,
		PodInfraContainerImage:         s.PodInfraContainerImage,
		SyncFrequency:                  s.SyncFrequency,
		RegistryPullQPS:                s.RegistryPullQPS,
		RegistryBurst:                  s.RegistryBurst,
		MinimumGCAge:                   s.MinimumGCAge,
		MaxPerPodContainerCount:        s.MaxPerPodContainerCount,
		MaxContainerCount:              s.MaxContainerCount,
		ClusterDomain:                  s.ClusterDomain,
		ClusterDNS:                     s.ClusterDNS,
		Runonce:                        s.RunOnce,
		Port:                           s.Port,
		CadvisorInterface:              cadvisorInterface,
		EnableServer:                   s.EnableServer,
		EnableDebuggingHandlers:        s.EnableDebuggingHandlers,
		DockerClient:                   dockertools.ConnectToDockerOrDie(s.DockerEndpoint),
		KubeClient:                     client,
		MasterServiceNamespace:         s.MasterServiceNamespace,
		VolumePlugins:                  ProbeVolumePlugins(),
		StreamingConnectionIdleTimeout: s.StreamingConnectionIdleTimeout,
		ImageGCPolicy:                  imageGCPolicy,
	}

	RunKubelet(&kcfg)

	// runs forever
	select {}

}