Golang FlagSet.ParseFlags方法代码示例

// ParseExec parses the specified args for the specified command and generates
// an ExecConfig from it.
// If the minimal number of specified args is not right or if specified args are
// not valid, it will return an error.
func ParseExec(cmd *flag.FlagSet, args []string) (*ExecConfig, error) {
	var (
		flStdin      = cmd.Bool([]string{"i", "-interactive"}, false, "Keep STDIN open even if not attached")
		flTty        = cmd.Bool([]string{"t", "-tty"}, false, "Allocate a pseudo-TTY")
		flDetach     = cmd.Bool([]string{"d", "-detach"}, false, "Detached mode: run command in the background")
		flUser       = cmd.String([]string{"u", "-user"}, "", "Username or UID (format: <name|uid>[:<group|gid>])")
		flPrivileged = cmd.Bool([]string{"-privileged"}, false, "Give extended privileges to the command")
		execCmd      []string
		container    string
	)
	cmd.Require(flag.Min, 2)
	if err := cmd.ParseFlags(args, true); err != nil {
		return nil, err
	}
	container = cmd.Arg(0)
	parsedArgs := cmd.Args()
	execCmd = parsedArgs[1:]

	execConfig := &ExecConfig{
		User:       *flUser,
		Privileged: *flPrivileged,
		Tty:        *flTty,
		Cmd:        execCmd,
		Container:  container,
		Detach:     *flDetach,
	}

	// If -d is not set, attach to everything by default
	if !*flDetach {
		execConfig.AttachStdout = true
		execConfig.AttachStderr = true
		if *flStdin {
			execConfig.AttachStdin = true
		}
	}

	return execConfig, nil
}

// Parse parses the specified args for the specified command and generates a Config,
// a HostConfig and returns them with the specified command.
// If the specified args are not valid, it will return an error.
func Parse(cmd *flag.FlagSet, args []string) (*Config, *HostConfig, *flag.FlagSet, error) {
	var (
		// FIXME: use utils.ListOpts for attach and volumes?
		flAttach  = opts.NewListOpts(opts.ValidateAttach)
		flVolumes = opts.NewListOpts(opts.ValidatePath)
		flLinks   = opts.NewListOpts(opts.ValidateLink)
		flEnv     = opts.NewListOpts(opts.ValidateEnv)
		flLabels  = opts.NewListOpts(opts.ValidateEnv)
		flDevices = opts.NewListOpts(opts.ValidateDevice)

		flUlimits = opts.NewUlimitOpt(nil)

		flPublish     = opts.NewListOpts(nil)
		flExpose      = opts.NewListOpts(nil)
		flDNS         = opts.NewListOpts(opts.ValidateIPAddress)
		flDNSSearch   = opts.NewListOpts(opts.ValidateDNSSearch)
		flDNSOptions  = opts.NewListOpts(nil)
		flExtraHosts  = opts.NewListOpts(opts.ValidateExtraHost)
		flVolumesFrom = opts.NewListOpts(nil)
		flLxcOpts     = opts.NewListOpts(nil)
		flEnvFile     = opts.NewListOpts(nil)
		flCapAdd      = opts.NewListOpts(nil)
		flCapDrop     = opts.NewListOpts(nil)
		flGroupAdd    = opts.NewListOpts(nil)
		flSecurityOpt = opts.NewListOpts(nil)
		flLabelsFile  = opts.NewListOpts(nil)
		flLoggingOpts = opts.NewListOpts(nil)

		flNetwork           = cmd.Bool([]string{"#n", "#-networking"}, true, "Enable networking for this container")
		flPrivileged        = cmd.Bool([]string{"#privileged", "-privileged"}, false, "Give extended privileges to this container")
		flPidMode           = cmd.String([]string{"-pid"}, "", "PID namespace to use")
		flUTSMode           = cmd.String([]string{"-uts"}, "", "UTS namespace to use")
		flPublishAll        = cmd.Bool([]string{"P", "-publish-all"}, false, "Publish all exposed ports to random ports")
		flStdin             = cmd.Bool([]string{"i", "-interactive"}, false, "Keep STDIN open even if not attached")
		flTty               = cmd.Bool([]string{"t", "-tty"}, false, "Allocate a pseudo-TTY")
		flOomKillDisable    = cmd.Bool([]string{"-oom-kill-disable"}, false, "Disable OOM Killer")
		flContainerIDFile   = cmd.String([]string{"#cidfile", "-cidfile"}, "", "Write the container ID to the file")
		flEntrypoint        = cmd.String([]string{"#entrypoint", "-entrypoint"}, "", "Overwrite the default ENTRYPOINT of the image")
		flHostname          = cmd.String([]string{"h", "-hostname"}, "", "Container host name")
		flMemoryString      = cmd.String([]string{"m", "-memory"}, "", "Memory limit")
		flMemoryReservation = cmd.String([]string{"-memory-reservation"}, "", "Memory soft limit")
		flMemorySwap        = cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
		flKernelMemory      = cmd.String([]string{"-kernel-memory"}, "", "Kernel memory limit")
		flUser              = cmd.String([]string{"u", "-user"}, "", "Username or UID (format: <name|uid>[:<group|gid>])")
		flWorkingDir        = cmd.String([]string{"w", "-workdir"}, "", "Working directory inside the container")
		flCPUShares         = cmd.Int64([]string{"#c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
		flCPUPeriod         = cmd.Int64([]string{"-cpu-period"}, 0, "Limit CPU CFS (Completely Fair Scheduler) period")
		flCPUQuota          = cmd.Int64([]string{"-cpu-quota"}, 0, "Limit CPU CFS (Completely Fair Scheduler) quota")
		flCpusetCpus        = cmd.String([]string{"#-cpuset", "-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
		flCpusetMems        = cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
		flBlkioWeight       = cmd.Uint16([]string{"-blkio-weight"}, 0, "Block IO (relative weight), between 10 and 1000")
		flSwappiness        = cmd.Int64([]string{"-memory-swappiness"}, -1, "Tuning container memory swappiness (0 to 100)")
		flNetMode           = cmd.String([]string{"-net"}, "default", "Set the Network for the container")
		flMacAddress        = cmd.String([]string{"-mac-address"}, "", "Container MAC address (e.g. 92:d0:c6:0a:29:33)")
		flIpcMode           = cmd.String([]string{"-ipc"}, "", "IPC namespace to use")
		flRestartPolicy     = cmd.String([]string{"-restart"}, "no", "Restart policy to apply when a container exits")
		flReadonlyRootfs    = cmd.Bool([]string{"-read-only"}, false, "Mount the container's root filesystem as read only")
		flLoggingDriver     = cmd.String([]string{"-log-driver"}, "", "Logging driver for container")
		flCgroupParent      = cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")
		flVolumeDriver      = cmd.String([]string{"-volume-driver"}, "", "Optional volume driver for the container")
		flStopSignal        = cmd.String([]string{"-stop-signal"}, signal.DefaultStopSignal, fmt.Sprintf("Signal to stop a container, %v by default", signal.DefaultStopSignal))
	)

	cmd.Var(&flAttach, []string{"a", "-attach"}, "Attach to STDIN, STDOUT or STDERR")
	cmd.Var(&flVolumes, []string{"v", "-volume"}, "Bind mount a volume")
	cmd.Var(&flLinks, []string{"#link", "-link"}, "Add link to another container")
	cmd.Var(&flDevices, []string{"-device"}, "Add a host device to the container")
	cmd.Var(&flLabels, []string{"l", "-label"}, "Set meta data on a container")
	cmd.Var(&flLabelsFile, []string{"-label-file"}, "Read in a line delimited file of labels")
	cmd.Var(&flEnv, []string{"e", "-env"}, "Set environment variables")
	cmd.Var(&flEnvFile, []string{"-env-file"}, "Read in a file of environment variables")
	cmd.Var(&flPublish, []string{"p", "-publish"}, "Publish a container's port(s) to the host")
	cmd.Var(&flExpose, []string{"#expose", "-expose"}, "Expose a port or a range of ports")
	cmd.Var(&flDNS, []string{"#dns", "-dns"}, "Set custom DNS servers")
	cmd.Var(&flDNSSearch, []string{"-dns-search"}, "Set custom DNS search domains")
	cmd.Var(&flDNSOptions, []string{"-dns-opt"}, "Set DNS options")
	cmd.Var(&flExtraHosts, []string{"-add-host"}, "Add a custom host-to-IP mapping (host:ip)")
	cmd.Var(&flVolumesFrom, []string{"#volumes-from", "-volumes-from"}, "Mount volumes from the specified container(s)")
	cmd.Var(&flLxcOpts, []string{"#lxc-conf", "-lxc-conf"}, "Add custom lxc options")
	cmd.Var(&flCapAdd, []string{"-cap-add"}, "Add Linux capabilities")
	cmd.Var(&flCapDrop, []string{"-cap-drop"}, "Drop Linux capabilities")
	cmd.Var(&flGroupAdd, []string{"-group-add"}, "Add additional groups to join")
	cmd.Var(&flSecurityOpt, []string{"-security-opt"}, "Security Options")
	cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")
	cmd.Var(&flLoggingOpts, []string{"-log-opt"}, "Log driver options")

	cmd.Require(flag.Min, 1)

	if err := cmd.ParseFlags(args, true); err != nil {
		return nil, nil, cmd, err
	}

	var (
		attachStdin  = flAttach.Get("stdin")
		attachStdout = flAttach.Get("stdout")
		attachStderr = flAttach.Get("stderr")
	)
//.........这里部分代码省略.........