本文整理汇总了Golang中github.com/docker/libnetwork/netutils.GenerateRandomMAC函数的典型用法代码示例。如果您正苦于以下问题:Golang GenerateRandomMAC函数的具体用法?Golang GenerateRandomMAC怎么用?Golang GenerateRandomMAC使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了GenerateRandomMAC函数的8个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。
示例1: TestGenerateRandomMAC
func TestGenerateRandomMAC(t *testing.T) {
defer osl.SetupTestOSContext(t)()
mac1 := netutils.GenerateRandomMAC()
mac2 := netutils.GenerateRandomMAC()
if bytes.Compare(mac1, mac2) == 0 {
t.Fatalf("Generated twice the same MAC address %v", mac1)
}
}
示例2: setupDevice
// SetupDevice create a new bridge interface/
func setupDevice(config *networkConfiguration, i *bridgeInterface) error {
// We only attempt to create the bridge when the requested device name is
// the default one.
if config.BridgeName != DefaultBridgeName && !config.AllowNonDefaultBridge {
return NonDefaultBridgeExistError(config.BridgeName)
}
// Set the bridgeInterface netlink.Bridge.
i.Link = &netlink.Bridge{
LinkAttrs: netlink.LinkAttrs{
Name: config.BridgeName,
},
}
// Only set the bridge's MAC address if the kernel version is > 3.3, as it
// was not supported before that.
kv, err := kernel.GetKernelVersion()
if err == nil && (kv.Kernel >= 3 && kv.Major >= 3) {
i.Link.Attrs().HardwareAddr = netutils.GenerateRandomMAC()
log.Debugf("Setting bridge mac address to %s", i.Link.Attrs().HardwareAddr)
}
// Call out to netlink to create the device.
if err = netlink.LinkAdd(i.Link); err != nil {
return types.InternalErrorf("Failed to program bridge link: %s", err.Error())
}
return nil
}
示例3: CreateEndpoint
func (d *driver) CreateEndpoint(nid, eid types.UUID, epInfo driverapi.EndpointInfo,
epOptions map[string]interface{}) error {
if err := validateID(nid, eid); err != nil {
return err
}
n := d.network(nid)
if n == nil {
return fmt.Errorf("network id %q not found", nid)
}
ep := &endpoint{
id: eid,
}
if epInfo != nil && (len(epInfo.Interfaces()) > 0) {
addr := epInfo.Interfaces()[0].Address()
ep.addr = &addr
ep.mac = epInfo.Interfaces()[0].MacAddress()
n.addEndpoint(ep)
return nil
}
ipID, err := d.ipAllocator.GetID()
if err != nil {
return fmt.Errorf("could not allocate ip from subnet %s: %v",
bridgeSubnet.String(), err)
}
ep.addr = &net.IPNet{
Mask: bridgeSubnet.Mask,
}
ep.addr.IP = make([]byte, 4)
binary.BigEndian.PutUint32(ep.addr.IP, bridgeSubnetInt+ipID)
ep.mac = netutils.GenerateRandomMAC()
err = epInfo.AddInterface(1, ep.mac, *ep.addr, net.IPNet{})
if err != nil {
return fmt.Errorf("could not add interface to endpoint info: %v", err)
}
n.addEndpoint(ep)
return nil
}
示例4: setupDevice
// SetupDevice create a new bridge interface/
func setupDevice(config *networkConfiguration, i *bridgeInterface) error {
var setMac bool
// We only attempt to create the bridge when the requested device name is
// the default one.
if config.BridgeName != DefaultBridgeName && !config.AllowNonDefaultBridge {
return NonDefaultBridgeExistError(config.BridgeName)
}
// Set the bridgeInterface netlink.Bridge.
i.Link = &netlink.Bridge{
LinkAttrs: netlink.LinkAttrs{
Name: config.BridgeName,
},
}
// Only set the bridge's MAC address if the kernel version is > 3.3, as it
// was not supported before that.
kv, err := kernel.GetKernelVersion()
if err != nil {
logrus.Errorf("Failed to check kernel versions: %v. Will not assign a MAC address to the bridge interface", err)
} else {
setMac = kv.Kernel > 3 || (kv.Kernel == 3 && kv.Major >= 3)
}
if err = netlink.LinkAdd(i.Link); err != nil {
logrus.Debugf("Failed to create bridge %s via netlink. Trying ioctl", config.BridgeName)
return ioctlCreateBridge(config.BridgeName, setMac)
}
if setMac {
hwAddr := netutils.GenerateRandomMAC()
if err = netlink.LinkSetHardwareAddr(i.Link, hwAddr); err != nil {
return fmt.Errorf("failed to set bridge mac-address %s : %s", hwAddr, err.Error())
}
logrus.Debugf("Setting bridge mac address to %s", hwAddr)
logrus.Debugf("call recieved to bridge driver, PLUMgrid")
}
return err
}
示例5: ioctlCreateBridge
func ioctlCreateBridge(name string, setMacAddr bool) error {
if len(name) >= ifNameSize {
return fmt.Errorf("Interface name %s too long", name)
}
s, err := getIfSocket()
if err != nil {
return err
}
defer syscall.Close(s)
nameBytePtr, err := syscall.BytePtrFromString(name)
if err != nil {
return err
}
if _, _, err := syscall.Syscall(syscall.SYS_IOCTL, uintptr(s), ioctlBrAdd, uintptr(unsafe.Pointer(nameBytePtr))); err != 0 {
return err
}
if setMacAddr {
return ioctlSetMacAddress(name, netutils.GenerateRandomMAC().String())
}
return nil
}
示例6: CreateEndpoint
func (n *network) CreateEndpoint(name string, options ...EndpointOption) (Endpoint, error) {
var err error
if !config.IsValidName(name) {
return nil, ErrInvalidName(name)
}
if _, err = n.EndpointByName(name); err == nil {
return nil, types.ForbiddenErrorf("service endpoint with name %s already exists", name)
}
ep := &endpoint{name: name, generic: make(map[string]interface{}), iface: &endpointInterface{}}
ep.id = stringid.GenerateRandomID()
// Initialize ep.network with a possibly stale copy of n. We need this to get network from
// store. But once we get it from store we will have the most uptodate copy possibly.
ep.network = n
ep.locator = n.getController().clusterHostID()
ep.network, err = ep.getNetworkFromStore()
if err != nil {
return nil, fmt.Errorf("failed to get network during CreateEndpoint: %v", err)
}
n = ep.network
ep.processOptions(options...)
for _, llIPNet := range ep.Iface().LinkLocalAddresses() {
if !llIPNet.IP.IsLinkLocalUnicast() {
return nil, types.BadRequestErrorf("invalid link local IP address: %v", llIPNet.IP)
}
}
if opt, ok := ep.generic[netlabel.MacAddress]; ok {
if mac, ok := opt.(net.HardwareAddr); ok {
ep.iface.mac = mac
}
}
ipam, cap, err := n.getController().getIPAMDriver(n.ipamType)
if err != nil {
return nil, err
}
if cap.RequiresMACAddress {
if ep.iface.mac == nil {
ep.iface.mac = netutils.GenerateRandomMAC()
}
if ep.ipamOptions == nil {
ep.ipamOptions = make(map[string]string)
}
ep.ipamOptions[netlabel.MacAddress] = ep.iface.mac.String()
}
if err = ep.assignAddress(ipam, true, n.enableIPv6 && !n.postIPv6); err != nil {
return nil, err
}
defer func() {
if err != nil {
ep.releaseAddress()
}
}()
if err = n.addEndpoint(ep); err != nil {
return nil, err
}
defer func() {
if err != nil {
if e := ep.deleteEndpoint(false); e != nil {
log.Warnf("cleaning up endpoint failed %s : %v", name, e)
}
}
}()
if err = ep.assignAddress(ipam, false, n.enableIPv6 && n.postIPv6); err != nil {
return nil, err
}
if err = n.getController().updateToStore(ep); err != nil {
return nil, err
}
defer func() {
if err != nil {
if e := n.getController().deleteFromStore(ep); e != nil {
log.Warnf("error rolling back endpoint %s from store: %v", name, e)
}
}
}()
// Watch for service records
n.getController().watchSvcRecord(ep)
defer func() {
if err != nil {
n.getController().unWatchSvcRecord(ep)
}
}()
// Increment endpoint count to indicate completion of endpoint addition
if err = n.getEpCnt().IncEndpointCnt(); err != nil {
return nil, err
}
//.........这里部分代码省略.........
示例7: CreateEndpoint
func (d *driver) CreateEndpoint(nid, eid string, ifInfo driverapi.InterfaceInfo, epOptions map[string]interface{}) error {
if ifInfo == nil {
return errors.New("invalid interface passed")
}
// Get the network handler and make sure it exists
d.Lock()
n, ok := d.networks[nid]
d.Unlock()
if !ok {
return types.NotFoundErrorf("network %s does not exist", nid)
}
if n == nil {
return driverapi.ErrNoNetwork(nid)
}
// Sanity check
n.Lock()
if n.id != nid {
n.Unlock()
return InvalidNetworkIDError(nid)
}
n.Unlock()
// Check if endpoint id is good and retrieve correspondent endpoint
ep, err := n.getEndpoint(eid)
if err != nil {
return err
}
// Endpoint with that id exists either on desired or other sandbox
if ep != nil {
return driverapi.ErrEndpointExists(eid)
}
// Try to convert the options to endpoint configuration
epConfig, err := parseEndpointOptions(epOptions)
if err != nil {
return err
}
// Create and add the endpoint
n.Lock()
endpoint := &bridgeEndpoint{id: eid, config: epConfig}
n.endpoints[eid] = endpoint
n.Unlock()
// On failure make sure to remove the endpoint
defer func() {
if err != nil {
n.Lock()
delete(n.endpoints, eid)
n.Unlock()
}
}()
// Create the sandbox side pipe interface
if ifInfo.MacAddress() == nil {
// No MAC address assigned to interface. Generate a random MAC to assign
endpoint.macAddress = netutils.GenerateRandomMAC()
if err := ifInfo.SetMacAddress(endpoint.macAddress); err != nil {
logrus.Warnf("Unable to set mac address: %s to endpoint: %s",
endpoint.macAddress.String(), endpoint.id)
return err
}
} else {
endpoint.macAddress = ifInfo.MacAddress()
}
endpoint.addr = ifInfo.Address()
endpoint.addrv6 = ifInfo.AddressIPv6()
c := n.config
// Program any required port mapping and store them in the endpoint
endpoint.portMapping, err = n.allocatePorts(endpoint, c.DefaultBindingIntf, c.DefaultBindingIP, true)
if err != nil {
return err
}
return nil
}
示例8: electMacAddress
func electMacAddress(epConfig *EndpointConfiguration) net.HardwareAddr {
if epConfig != nil && epConfig.MacAddress != nil {
return epConfig.MacAddress
}
return netutils.GenerateRandomMAC()
}