Golang netlink.AddRoute函数代码示例

func setupRoute(config *configs.Config) error {
	for _, config := range config.Routes {
		if err := netlink.AddRoute(config.Destination, config.Source, config.Gateway, config.InterfaceName); err != nil {
			return err
		}
	}
	return nil
}

func setIP(a addressStruct) (err error) {
	log.Printf("Set IP:%s, to:%s", a.IP, a.Link)
	err = network.SetInterfaceIp(a.Link, a.IP)
	if err != nil {
		return
	}
	log.Printf("Adding route for this address")
	_ = netlink.AddRoute("", a.IP, "", a.Link)
	return
}

func InitDriver(job *engine.Job) error {
	var (
		networkv4      *net.IPNet
		networkv6      *net.IPNet
		addrv4         net.Addr
		addrsv6        []net.Addr
		enableIPTables = job.GetenvBool("EnableIptables")
		enableIPv6     = job.GetenvBool("EnableIPv6")
		icc            = job.GetenvBool("InterContainerCommunication")
		ipMasq         = job.GetenvBool("EnableIpMasq")
		ipForward      = job.GetenvBool("EnableIpForward")
		bridgeIP       = job.Getenv("BridgeIP")
		bridgeIPv6     = "fe80::1/64"
		fixedCIDR      = job.Getenv("FixedCIDR")
		fixedCIDRv6    = job.Getenv("FixedCIDRv6")
	)

	if defaultIP := job.Getenv("DefaultBindingIP"); defaultIP != "" {
		defaultBindingIP = net.ParseIP(defaultIP)
	}

	bridgeIface = job.Getenv("BridgeIface")
	usingDefaultBridge := false
	if bridgeIface == "" {
		usingDefaultBridge = true
		bridgeIface = DefaultNetworkBridge
	}

	addrv4, addrsv6, err := networkdriver.GetIfaceAddr(bridgeIface)

	if err != nil {
		// No Bridge existent, create one
		// If we're not using the default bridge, fail without trying to create it
		if !usingDefaultBridge {
			return err
		}

		// If the iface is not found, try to create it
		if err := configureBridge(bridgeIP, bridgeIPv6, enableIPv6); err != nil {
			return err
		}

		addrv4, addrsv6, err = networkdriver.GetIfaceAddr(bridgeIface)
		if err != nil {
			return err
		}

		if fixedCIDRv6 != "" {
			// Setting route to global IPv6 subnet
			logrus.Infof("Adding route to IPv6 network %q via device %q", fixedCIDRv6, bridgeIface)
			if err := netlink.AddRoute(fixedCIDRv6, "", "", bridgeIface); err != nil {
				logrus.Fatalf("Could not add route to IPv6 network %q via device %q", fixedCIDRv6, bridgeIface)
			}
		}
	} else {
		// Bridge exists already, getting info...
		// Validate that the bridge ip matches the ip specified by BridgeIP
		if bridgeIP != "" {
			networkv4 = addrv4.(*net.IPNet)
			bip, _, err := net.ParseCIDR(bridgeIP)
			if err != nil {
				return err
			}
			if !networkv4.IP.Equal(bip) {
				return fmt.Errorf("Bridge ip (%s) does not match existing bridge configuration %s", networkv4.IP, bip)
			}
		}

		// A bridge might exist but not have any IPv6 addr associated with it yet
		// (for example, an existing Docker installation that has only been used
		// with IPv4 and docker0 already is set up) In that case, we can perform
		// the bridge init for IPv6 here, else we will error out below if --ipv6=true
		if len(addrsv6) == 0 && enableIPv6 {
			if err := setupIPv6Bridge(bridgeIPv6); err != nil {
				return err
			}
			// Recheck addresses now that IPv6 is setup on the bridge
			addrv4, addrsv6, err = networkdriver.GetIfaceAddr(bridgeIface)
			if err != nil {
				return err
			}
		}

		// TODO: Check if route to fixedCIDRv6 is set
	}

	if enableIPv6 {
		bip6, _, err := net.ParseCIDR(bridgeIPv6)
		if err != nil {
			return err
		}
		found := false
		for _, addrv6 := range addrsv6 {
			networkv6 = addrv6.(*net.IPNet)
			if networkv6.IP.Equal(bip6) {
				found = true
				break
			}
		}
		if !found {
//.........这里部分代码省略.........

func InitDriver(config *Config) error {
	var (
		networkv4  *net.IPNet
		networkv6  *net.IPNet
		addrv4     net.Addr
		addrsv6    []net.Addr
		bridgeIPv6 = "fe80::1/64"
	)
	initPortMapper()

	if config.DefaultIp != nil {
		defaultBindingIP = config.DefaultIp
	}

	bridgeIface = config.Iface
	usingDefaultBridge := false
	if bridgeIface == "" {
		usingDefaultBridge = true
		bridgeIface = DefaultNetworkBridge
	}

	addrv4, addrsv6, err := networkdriver.GetIfaceAddr(bridgeIface)

	if err != nil {
		// No Bridge existent, create one
		// If we're not using the default bridge, fail without trying to create it
		if !usingDefaultBridge {
			return err
		}

		logrus.Info("Bridge interface not found, trying to create it")

		// If the iface is not found, try to create it
		if err := configureBridge(config.IP, bridgeIPv6, config.EnableIPv6); err != nil {
			logrus.Errorf("Could not configure Bridge: %s", err)
			return err
		}

		addrv4, addrsv6, err = networkdriver.GetIfaceAddr(bridgeIface)
		if err != nil {
			return err
		}

		if config.FixedCIDRv6 != "" {
			// Setting route to global IPv6 subnet
			logrus.Infof("Adding route to IPv6 network %q via device %q", config.FixedCIDRv6, bridgeIface)
			if err := netlink.AddRoute(config.FixedCIDRv6, "", "", bridgeIface); err != nil {
				logrus.Fatalf("Could not add route to IPv6 network %q via device %q", config.FixedCIDRv6, bridgeIface)
			}
		}
	} else {
		// Bridge exists already, getting info...
		// Validate that the bridge ip matches the ip specified by BridgeIP
		if config.IP != "" {
			networkv4 = addrv4.(*net.IPNet)
			bip, _, err := net.ParseCIDR(config.IP)
			if err != nil {
				return err
			}
			if !networkv4.IP.Equal(bip) {
				return fmt.Errorf("Bridge ip (%s) does not match existing bridge configuration %s", networkv4.IP, bip)
			}
		}

		// A bridge might exist but not have any IPv6 addr associated with it yet
		// (for example, an existing Docker installation that has only been used
		// with IPv4 and docker0 already is set up) In that case, we can perform
		// the bridge init for IPv6 here, else we will error out below if --ipv6=true
		if len(addrsv6) == 0 && config.EnableIPv6 {
			if err := setupIPv6Bridge(bridgeIPv6); err != nil {
				return err
			}
			// Recheck addresses now that IPv6 is setup on the bridge
			addrv4, addrsv6, err = networkdriver.GetIfaceAddr(bridgeIface)
			if err != nil {
				return err
			}
		}

		// TODO: Check if route to config.FixedCIDRv6 is set
	}

	if config.EnableIPv6 {
		bip6, _, err := net.ParseCIDR(bridgeIPv6)
		if err != nil {
			return err
		}
		found := false
		for _, addrv6 := range addrsv6 {
			networkv6 = addrv6.(*net.IPNet)
			if networkv6.IP.Equal(bip6) {
				found = true
				break
			}
		}
		if !found {
			return fmt.Errorf("Bridge IPv6 does not match existing bridge configuration %s", bip6)
		}
	}

//.........这里部分代码省略.........