Golang types.ContainerCreateConfig类代码示例

// ContainerCreate creates a container.
func (daemon *Daemon) ContainerCreate(params types.ContainerCreateConfig) (types.ContainerCreateResponse, error) {
	if params.Config == nil {
		return types.ContainerCreateResponse{}, fmt.Errorf("Config cannot be empty in order to create a container")
	}

	warnings, err := daemon.verifyContainerSettings(params.HostConfig, params.Config, false)
	if err != nil {
		return types.ContainerCreateResponse{Warnings: warnings}, err
	}

	err = daemon.verifyNetworkingConfig(params.NetworkingConfig)
	if err != nil {
		return types.ContainerCreateResponse{}, err
	}

	if params.HostConfig == nil {
		params.HostConfig = &containertypes.HostConfig{}
	}
	err = daemon.adaptContainerSettings(params.HostConfig, params.AdjustCPUShares)
	if err != nil {
		return types.ContainerCreateResponse{Warnings: warnings}, err
	}

	container, err := daemon.create(params)
	if err != nil {
		return types.ContainerCreateResponse{Warnings: warnings}, daemon.imageNotExistToErrcode(err)
	}

	return types.ContainerCreateResponse{ID: container.ID, Warnings: warnings}, nil
}

// ContainerCreate creates a container.
func (daemon *Daemon) ContainerCreate(params types.ContainerCreateConfig) (types.ContainerCreateResponse, error) {
	if params.Config == nil {
		return types.ContainerCreateResponse{}, derr.ErrorCodeEmptyConfig
	}

	warnings, err := daemon.verifyContainerSettings(params.HostConfig, params.Config)
	if err != nil {
		return types.ContainerCreateResponse{Warnings: warnings}, err
	}

	if params.HostConfig == nil {
		params.HostConfig = &containertypes.HostConfig{}
	}
	err = daemon.adaptContainerSettings(params.HostConfig, params.AdjustCPUShares)
	if err != nil {
		return types.ContainerCreateResponse{Warnings: warnings}, err
	}

	container, err := daemon.create(params)
	if err != nil {
		return types.ContainerCreateResponse{Warnings: warnings}, daemon.imageNotExistToErrcode(err)
	}

	return types.ContainerCreateResponse{ID: container.ID, Warnings: warnings}, nil
}

// TestContainerCreateEmptyImageCache() attempts a ContainerCreate() with an empty image
// cache
func TestContainerCreateEmptyImageCache(t *testing.T) {
	mockContainerProxy := NewMockContainerProxy()

	// Create our personality Container backend
	cb := &Container{
		containerProxy: mockContainerProxy,
	}

	// mock a container create config
	var config types.ContainerCreateConfig

	config.HostConfig = &container.HostConfig{}
	config.Config = &container.Config{}
	config.NetworkingConfig = &dnetwork.NetworkingConfig{}
	config.Config.Image = "busybox"

	_, err := cb.ContainerCreate(config)

	assert.Contains(t, err.Error(), "No such image", "Error (%s) should have 'No such image' for an empty image cache", err.Error())
}

// TestContainerAddVolumes() assumes container handle create succeeded and cycles through all
// possible input/outputs for committing the handle and calls vicbackends.ContainerCreate()
func TestCommitHandle(t *testing.T) {
	mockContainerProxy := NewMockContainerProxy()

	// Create our personality Container backend
	cb := &Container{
		containerProxy: mockContainerProxy,
	}

	AddMockImageToCache()

	// mock a container create config
	var config types.ContainerCreateConfig

	config.HostConfig = &container.HostConfig{}
	config.Config = &container.Config{}
	config.NetworkingConfig = &dnetwork.NetworkingConfig{}

	mockCommitHandleData := MockCommitData()

	// Iterate over create handler responses and see what the composite ContainerCreate()
	// returns.  Since the handle is the first operation, we expect to receive a create handle
	// error.
	_, _, _, count := mockContainerProxy.GetMockDataCount()

	for i := 0; i < count; i++ {
		if i == SUCCESS { //skip success case
			continue
		}

		mockContainerProxy.SetMockDataResponse(0, 0, 0, i)
		config.Config.Image = mockCommitHandleData[i].createInputID
		_, err := cb.ContainerCreate(config)

		assert.Contains(t, err.Error(), mockCommitHandleData[i].createErrSubstr)
	}

}

// CreateContainer creates a new container in the given PodSandbox
// Note: docker doesn't use LogPath yet.
// TODO: check if the default values returned by the runtime API are ok.
func (ds *dockerService) CreateContainer(podSandboxID string, config *runtimeApi.ContainerConfig, sandboxConfig *runtimeApi.PodSandboxConfig) (string, error) {
	if config == nil {
		return "", fmt.Errorf("container config is nil")
	}
	if sandboxConfig == nil {
		return "", fmt.Errorf("sandbox config is nil for container %q", config.Metadata.GetName())
	}

	labels := makeLabels(config.GetLabels(), config.GetAnnotations())
	// Apply a the container type label.
	labels[containerTypeLabelKey] = containerTypeLabelContainer
	// Write the sandbox ID in the labels.
	labels[sandboxIDLabelKey] = podSandboxID

	image := ""
	if iSpec := config.GetImage(); iSpec != nil {
		image = iSpec.GetImage()
	}
	createConfig := dockertypes.ContainerCreateConfig{
		Name: makeContainerName(sandboxConfig, config),
		Config: &dockercontainer.Config{
			// TODO: set User.
			Entrypoint: dockerstrslice.StrSlice(config.GetCommand()),
			Cmd:        dockerstrslice.StrSlice(config.GetArgs()),
			Env:        generateEnvList(config.GetEnvs()),
			Image:      image,
			WorkingDir: config.GetWorkingDir(),
			Labels:     labels,
			// Interactive containers:
			OpenStdin: config.GetStdin(),
			StdinOnce: config.GetStdinOnce(),
			Tty:       config.GetTty(),
		},
	}

	// Fill the HostConfig.
	hc := &dockercontainer.HostConfig{
		Binds:          generateMountBindings(config.GetMounts()),
		ReadonlyRootfs: config.GetReadonlyRootfs(),
		Privileged:     config.GetPrivileged(),
	}

	// Apply options derived from the sandbox config.
	if lc := sandboxConfig.GetLinux(); lc != nil {
		// Apply Cgroup options.
		// TODO: Check if this works with per-pod cgroups.
		hc.CgroupParent = lc.GetCgroupParent()

		// Apply namespace options.
		sandboxNSMode := fmt.Sprintf("container:%v", podSandboxID)
		hc.NetworkMode = dockercontainer.NetworkMode(sandboxNSMode)
		hc.IpcMode = dockercontainer.IpcMode(sandboxNSMode)
		hc.UTSMode = ""
		hc.PidMode = ""

		nsOpts := lc.GetNamespaceOptions()
		if nsOpts != nil {
			if nsOpts.GetHostNetwork() {
				hc.UTSMode = namespaceModeHost
			}
			if nsOpts.GetHostPid() {
				hc.PidMode = namespaceModeHost
			}
		}
	}

	// Apply Linux-specific options if applicable.
	if lc := config.GetLinux(); lc != nil {
		// Apply resource options.
		// TODO: Check if the units are correct.
		// TODO: Can we assume the defaults are sane?
		rOpts := lc.GetResources()
		if rOpts != nil {
			hc.Resources = dockercontainer.Resources{
				Memory:     rOpts.GetMemoryLimitInBytes(),
				MemorySwap: -1, // Always disable memory swap.
				CPUShares:  rOpts.GetCpuShares(),
				CPUQuota:   rOpts.GetCpuQuota(),
				CPUPeriod:  rOpts.GetCpuPeriod(),
				// TODO: Need to set devices.
			}
			hc.OomScoreAdj = int(rOpts.GetOomScoreAdj())
		}
		// Note: ShmSize is handled in kube_docker_client.go
	}

	var err error
	hc.SecurityOpt, err = getContainerSecurityOpts(config.Metadata.GetName(), sandboxConfig, ds.seccompProfileRoot)
	if err != nil {
		return "", fmt.Errorf("failed to generate container security options for container %q: %v", config.Metadata.GetName(), err)
	}
	// TODO: Add or drop capabilities.

	createConfig.HostConfig = hc
	createResp, err := ds.client.CreateContainer(createConfig)
	if createResp != nil {
		return createResp.ID, err
//.........这里部分代码省略.........

// CreateContainer creates a new container in the given PodSandbox
// Note: docker doesn't use LogPath yet.
// TODO: check if the default values returned by the runtime API are ok.
func (ds *dockerService) CreateContainer(podSandboxID string, config *runtimeApi.ContainerConfig, sandboxConfig *runtimeApi.PodSandboxConfig) (string, error) {
	if config == nil {
		return "", fmt.Errorf("container config is nil")
	}
	if sandboxConfig == nil {
		return "", fmt.Errorf("sandbox config is nil for container %q", config.Metadata.GetName())
	}

	labels := makeLabels(config.GetLabels(), config.GetAnnotations())
	// Apply a the container type label.
	labels[containerTypeLabelKey] = containerTypeLabelContainer
	// Write the container log path in the labels.
	labels[containerLogPathLabelKey] = filepath.Join(sandboxConfig.GetLogDirectory(), config.GetLogPath())
	// Write the sandbox ID in the labels.
	labels[sandboxIDLabelKey] = podSandboxID

	image := ""
	if iSpec := config.GetImage(); iSpec != nil {
		image = iSpec.GetImage()
	}
	createConfig := dockertypes.ContainerCreateConfig{
		Name: makeContainerName(sandboxConfig, config),
		Config: &dockercontainer.Config{
			// TODO: set User.
			Entrypoint: dockerstrslice.StrSlice(config.GetCommand()),
			Cmd:        dockerstrslice.StrSlice(config.GetArgs()),
			Env:        generateEnvList(config.GetEnvs()),
			Image:      image,
			WorkingDir: config.GetWorkingDir(),
			Labels:     labels,
			// Interactive containers:
			OpenStdin: config.GetStdin(),
			StdinOnce: config.GetStdinOnce(),
			Tty:       config.GetTty(),
		},
	}

	// Fill the HostConfig.
	hc := &dockercontainer.HostConfig{
		Binds: generateMountBindings(config.GetMounts()),
	}

	// Apply cgroupsParent derived from the sandbox config.
	if lc := sandboxConfig.GetLinux(); lc != nil {
		// Apply Cgroup options.
		// TODO: Check if this works with per-pod cgroups.
		// TODO: we need to pass the cgroup in syntax expected by cgroup driver but shim does not use docker info yet...
		hc.CgroupParent = lc.GetCgroupParent()
	}

	// Apply Linux-specific options if applicable.
	if lc := config.GetLinux(); lc != nil {
		// Apply resource options.
		// TODO: Check if the units are correct.
		// TODO: Can we assume the defaults are sane?
		rOpts := lc.GetResources()
		if rOpts != nil {
			hc.Resources = dockercontainer.Resources{
				Memory:     rOpts.GetMemoryLimitInBytes(),
				MemorySwap: -1, // Always disable memory swap.
				CPUShares:  rOpts.GetCpuShares(),
				CPUQuota:   rOpts.GetCpuQuota(),
				CPUPeriod:  rOpts.GetCpuPeriod(),
			}
			hc.OomScoreAdj = int(rOpts.GetOomScoreAdj())
		}
		// Note: ShmSize is handled in kube_docker_client.go

		// Apply security context.
		applyContainerSecurityContext(lc, podSandboxID, createConfig.Config, hc)
	}

	// Set devices for container.
	devices := make([]dockercontainer.DeviceMapping, len(config.Devices))
	for i, device := range config.Devices {
		devices[i] = dockercontainer.DeviceMapping{
			PathOnHost:        device.GetHostPath(),
			PathInContainer:   device.GetContainerPath(),
			CgroupPermissions: device.GetPermissions(),
		}
	}
	hc.Resources.Devices = devices

	// Apply appArmor and seccomp options.
	securityOpts, err := getContainerSecurityOpts(config.Metadata.GetName(), sandboxConfig, ds.seccompProfileRoot)
	if err != nil {
		return "", fmt.Errorf("failed to generate container security options for container %q: %v", config.Metadata.GetName(), err)
	}
	hc.SecurityOpt = append(hc.SecurityOpt, securityOpts...)

	createConfig.HostConfig = hc
	createResp, err := ds.client.CreateContainer(createConfig)
	if createResp != nil {
		return createResp.ID, err
	}
	return "", err
}

// CreateContainer creates a new container in the given PodSandbox
// Note: docker doesn't use LogPath yet.
// TODO: check if the default values returned by the runtime API are ok.
func (ds *dockerService) CreateContainer(podSandboxID string, config *runtimeApi.ContainerConfig, sandboxConfig *runtimeApi.PodSandboxConfig) (string, error) {
	if config == nil {
		return "", fmt.Errorf("container config is nil")
	}
	if sandboxConfig == nil {
		return "", fmt.Errorf("sandbox config is nil for container %q", config.GetName())
	}

	// Merge annotations and labels because docker supports only labels.
	// TODO: add a prefix to annotations so that we can distinguish labels and
	// annotations when reading back them from the docker container.
	// TODO: should we apply docker-specific labels?
	labels := config.GetLabels()
	for k, v := range config.GetAnnotations() {
		if _, ok := labels[k]; !ok {
			// Only write to labels if the key doesn't exist.
			labels[k] = v
		}
	}

	image := ""
	if iSpec := config.GetImage(); iSpec != nil {
		image = iSpec.GetImage()
	}
	createConfig := dockertypes.ContainerCreateConfig{
		Name: config.GetName(),
		Config: &dockercontainer.Config{
			// TODO: set User.
			Hostname:   sandboxConfig.GetHostname(),
			Entrypoint: dockerstrslice.StrSlice(config.GetCommand()),
			Cmd:        dockerstrslice.StrSlice(config.GetArgs()),
			Env:        generateEnvList(config.GetEnvs()),
			Image:      image,
			WorkingDir: config.GetWorkingDir(),
			Labels:     labels,
			// Interactive containers:
			OpenStdin: config.GetStdin(),
			StdinOnce: config.GetStdinOnce(),
			Tty:       config.GetTty(),
		},
	}

	// Fill the HostConfig.
	hc := &dockercontainer.HostConfig{
		Binds:          generateMountBindings(config.GetMounts()),
		ReadonlyRootfs: config.GetReadonlyRootfs(),
		Privileged:     config.GetPrivileged(),
	}

	// Apply options derived from the sandbox config.
	if lc := sandboxConfig.GetLinux(); lc != nil {
		// Apply Cgroup options.
		// TODO: Check if this works with per-pod cgroups.
		hc.CgroupParent = lc.GetCgroupParent()

		// Apply namespace options.
		sandboxNSMode := fmt.Sprintf("container:%v", podSandboxID)
		hc.NetworkMode = dockercontainer.NetworkMode(sandboxNSMode)
		hc.IpcMode = dockercontainer.IpcMode(sandboxNSMode)
		hc.UTSMode = ""
		hc.PidMode = ""

		nsOpts := lc.GetNamespaceOptions()
		if nsOpts != nil {
			if nsOpts.GetHostNetwork() {
				hc.UTSMode = namespaceModeHost
			}
			if nsOpts.GetHostPid() {
				hc.PidMode = namespaceModeHost
			}
		}
	}

	// Apply Linux-specific options if applicable.
	if lc := config.GetLinux(); lc != nil {
		// Apply resource options.
		// TODO: Check if the units are correct.
		// TODO: Can we assume the defaults are sane?
		rOpts := lc.GetResources()
		if rOpts != nil {
			hc.Resources = dockercontainer.Resources{
				Memory:     rOpts.GetMemoryLimitInBytes(),
				MemorySwap: -1, // Always disable memory swap.
				CPUShares:  rOpts.GetCpuShares(),
				CPUQuota:   rOpts.GetCpuQuota(),
				CPUPeriod:  rOpts.GetCpuPeriod(),
				// TODO: Need to set devices.
			}
			hc.OomScoreAdj = int(rOpts.GetOomScoreAdj())
		}
		// Note: ShmSize is handled in kube_docker_client.go
	}

	// TODO: Seccomp support. Need to figure out how to pass seccomp options
	// through the runtime API (annotations?).See dockerManager.getSecurityOpts()
	// for the details. Always set the default seccomp profile for now.
	hc.SecurityOpt = []string{fmt.Sprintf("%s=%s", "seccomp", defaultSeccompProfile)}
//.........这里部分代码省略.........

// validateCreateConfig() checks the parameters for ContainerCreate().
// It may "fix up" the config param passed into ConntainerCreate() if needed.
func validateCreateConfig(config *types.ContainerCreateConfig) error {
	defer trace.End(trace.Begin("Container.validateCreateConfig"))

	// process cpucount here
	var cpuCount int64 = DefaultCPUs

	// support windows client
	if config.HostConfig.CPUCount > 0 {
		cpuCount = config.HostConfig.CPUCount
	} else {
		// we hijack --cpuset-cpus in the non-windows case
		if config.HostConfig.CpusetCpus != "" {
			cpus := strings.Split(config.HostConfig.CpusetCpus, ",")
			if c, err := strconv.Atoi(cpus[0]); err == nil {
				cpuCount = int64(c)
			} else {
				return fmt.Errorf("Error parsing CPU count: %s", err)
			}
		}
	}
	config.HostConfig.CPUCount = cpuCount

	// fix-up cpu/memory settings here
	if cpuCount < MinCPUs {
		config.HostConfig.CPUCount = MinCPUs
	}
	log.Infof("Container CPU count: %d", config.HostConfig.CPUCount)

	// convert from bytes to MiB for vsphere
	memoryMB := config.HostConfig.Memory / units.MiB
	if memoryMB == 0 {
		memoryMB = MemoryDefaultMB
	} else if memoryMB < MemoryMinMB {
		memoryMB = MemoryMinMB
	}

	// check that memory is aligned
	if remainder := memoryMB % MemoryAlignMB; remainder != 0 {
		log.Warnf("Default container VM memory must be %d aligned for hotadd, rounding up.", MemoryAlignMB)
		memoryMB += MemoryAlignMB - remainder
	}

	config.HostConfig.Memory = memoryMB
	log.Infof("Container memory: %d MB", config.HostConfig.Memory)

	if config.NetworkingConfig == nil {
		config.NetworkingConfig = &dnetwork.NetworkingConfig{}
	}

	if config.HostConfig == nil || config.Config == nil {
		return BadRequestError("invalid config")
	}

	// validate port bindings
	if config.HostConfig != nil {
		var ips []string
		if addrs, err := externalIPv4Addrs(); err != nil {
			log.Warnf("could not get address for external interface: %s", err)
		} else {
			ips = make([]string, len(addrs))
			for i := range addrs {
				ips[i] = addrs[i].IP.String()
			}
		}

		for _, pbs := range config.HostConfig.PortBindings {
			for _, pb := range pbs {
				if pb.HostIP != "" && pb.HostIP != "0.0.0.0" {
					// check if specified host ip equals any of the addresses on the "client" interface
					found := false
					for _, i := range ips {
						if i == pb.HostIP {
							found = true
							break
						}
					}
					if !found {
						return InternalServerError("host IP for port bindings is only supported for 0.0.0.0 and the external interface IP address")
					}
				}

				start, end, _ := nat.ParsePortRangeToInt(pb.HostPort)
				if start != end {
					return InternalServerError("host port ranges are not supported for port bindings")
				}
			}
		}
	}

	// TODO(jzt): users other than root are not currently supported
	// We should check for USER in config.Config.Env once we support Dockerfiles.
	if config.Config.User != "" && config.Config.User != "root" {
		return InternalServerError("Failed to create container - users other than root are not currently supported")
	}

	// https://github.com/vmware/vic/issues/1378
	if len(config.Config.Entrypoint) == 0 && len(config.Config.Cmd) == 0 {
		return derr.NewRequestNotFoundError(fmt.Errorf("No command specified"))
//.........这里部分代码省略.........