当前位置: 首页>>代码示例>>Golang>>正文

Golang iptables.RemoveExistingChain函数代码示例

本文整理汇总了Golang中github.com/docker/docker/pkg/iptables.RemoveExistingChain函数的典型用法代码示例。如果您正苦于以下问题：Golang RemoveExistingChain函数的具体用法？Golang RemoveExistingChain怎么用？Golang RemoveExistingChain使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了RemoveExistingChain函数的3个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Golang代码示例。

示例1: InitDriver


//.........这里部分代码省略.........
			}
		}
		if !found {
			return fmt.Errorf("Bridge IPv6 does not match existing bridge configuration %s", bip6)
		}
	}

	networkv4 = addrv4.(*net.IPNet)

	if enableIPv6 {
		if len(addrsv6) == 0 {
			return errors.New("IPv6 enabled but no IPv6 detected")
		}
		bridgeIPv6Addr = networkv6.IP
	}

	// Configure iptables for link support
	if enableIPTables {
		if err := setupIPTables(addrv4, icc, ipMasq); err != nil {
			return err
		}

	}

	if ipForward {
		// Enable IPv4 forwarding
		if err := ioutil.WriteFile("/proc/sys/net/ipv4/ip_forward", []byte{'1', '\n'}, 0644); err != nil {
			logrus.Warnf("WARNING: unable to enable IPv4 forwarding: %s\n", err)
		}

		if fixedCIDRv6 != "" {
			// Enable IPv6 forwarding
			if err := ioutil.WriteFile("/proc/sys/net/ipv6/conf/default/forwarding", []byte{'1', '\n'}, 0644); err != nil {
				logrus.Warnf("WARNING: unable to enable IPv6 default forwarding: %s\n", err)
			}
			if err := ioutil.WriteFile("/proc/sys/net/ipv6/conf/all/forwarding", []byte{'1', '\n'}, 0644); err != nil {
				logrus.Warnf("WARNING: unable to enable IPv6 all forwarding: %s\n", err)
			}
		}
	}

	// We can always try removing the iptables
	if err := iptables.RemoveExistingChain("DOCKER", iptables.Nat); err != nil {
		return err
	}

	if enableIPTables {
		_, err := iptables.NewChain("DOCKER", bridgeIface, iptables.Nat)
		if err != nil {
			return err
		}
		chain, err := iptables.NewChain("DOCKER", bridgeIface, iptables.Filter)
		if err != nil {
			return err
		}
		portmapper.SetIptablesChain(chain)
	}

	bridgeIPv4Network = networkv4
	if fixedCIDR != "" {
		_, subnet, err := net.ParseCIDR(fixedCIDR)
		if err != nil {
			return err
		}
		logrus.Debugf("Subnet: %v", subnet)
		if err := ipAllocator.RegisterSubnet(bridgeIPv4Network, subnet); err != nil {
			return err
		}
	}

	if fixedCIDRv6 != "" {
		_, subnet, err := net.ParseCIDR(fixedCIDRv6)
		if err != nil {
			return err
		}
		logrus.Debugf("Subnet: %v", subnet)
		if err := ipAllocator.RegisterSubnet(subnet, subnet); err != nil {
			return err
		}
		globalIPv6Network = subnet
	}

	// Block BridgeIP in IP allocator
	ipAllocator.RequestIP(bridgeIPv4Network, bridgeIPv4Network.IP)

	// https://github.com/docker/docker/issues/2768
	job.Eng.Hack_SetGlobalVar("httpapi.bridgeIP", bridgeIPv4Network.IP)

	for name, f := range map[string]engine.Handler{
		"allocate_interface": Allocate,
		"release_interface":  Release,
		"allocate_port":      AllocatePort,
		"link":               LinkContainers,
	} {
		if err := job.Eng.Register(name, f); err != nil {
			return err
		}
	}
	return nil
}
开发者ID:nicholaskh，项目名称:docker，代码行数:101，代码来源:driver.go

示例2: InitDriver

func InitDriver(job *engine.Job) engine.Status {
	var (
		network        *net.IPNet
		enableIPTables = job.GetenvBool("EnableIptables")
		icc            = job.GetenvBool("InterContainerCommunication")
		ipMasq         = job.GetenvBool("EnableIpMasq")
		ipForward      = job.GetenvBool("EnableIpForward")
		bridgeIP       = job.Getenv("BridgeIP")
		fixedCIDR      = job.Getenv("FixedCIDR")
	)

	if defaultIP := job.Getenv("DefaultBindingIP"); defaultIP != "" {
		defaultBindingIP = net.ParseIP(defaultIP)
	}

	bridgeIface = job.Getenv("BridgeIface")
	usingDefaultBridge := false
	if bridgeIface == "" {
		usingDefaultBridge = true
		bridgeIface = DefaultNetworkBridge
	}

	addr, err := networkdriver.GetIfaceAddr(bridgeIface)
	if err != nil {
		// If we're not using the default bridge, fail without trying to create it
		if !usingDefaultBridge {
			return job.Error(err)
		}
		// If the bridge interface is not found (or has no address), try to create it and/or add an address
		if err := configureBridge(bridgeIP); err != nil {
			return job.Error(err)
		}

		addr, err = networkdriver.GetIfaceAddr(bridgeIface)
		if err != nil {
			return job.Error(err)
		}
		network = addr.(*net.IPNet)
	} else {
		network = addr.(*net.IPNet)
		// validate that the bridge ip matches the ip specified by BridgeIP
		if bridgeIP != "" {
			bip, _, err := net.ParseCIDR(bridgeIP)
			if err != nil {
				return job.Error(err)
			}
			if !network.IP.Equal(bip) {
				return job.Errorf("bridge ip (%s) does not match existing bridge configuration %s", network.IP, bip)
			}
		}
	}

	// Configure iptables for link support
	if enableIPTables {
		if err := setupIPTables(addr, icc, ipMasq); err != nil {
			return job.Error(err)
		}
	}

	if ipForward {
		// Enable IPv4 forwarding
		if err := ioutil.WriteFile("/proc/sys/net/ipv4/ip_forward", []byte{'1', '\n'}, 0644); err != nil {
			job.Logf("WARNING: unable to enable IPv4 forwarding: %s\n", err)
		}
	}

	// We can always try removing the iptables
	if err := iptables.RemoveExistingChain("DOCKER"); err != nil {
		return job.Error(err)
	}

	if enableIPTables {
		chain, err := iptables.NewChain("DOCKER", bridgeIface)
		if err != nil {
			return job.Error(err)
		}
		portmapper.SetIptablesChain(chain)
	}

	bridgeNetwork = network
	if fixedCIDR != "" {
		_, subnet, err := net.ParseCIDR(fixedCIDR)
		if err != nil {
			return job.Error(err)
		}
		log.Debugf("Subnet: %v", subnet)
		if err := ipallocator.RegisterSubnet(bridgeNetwork, subnet); err != nil {
			return job.Error(err)
		}
	}

	// https://github.com/docker/docker/issues/2768
	job.Eng.Hack_SetGlobalVar("httpapi.bridgeIP", bridgeNetwork.IP)

	for name, f := range map[string]engine.Handler{
		"allocate_interface": Allocate,
		"release_interface":  Release,
		"allocate_port":      AllocatePort,
		"link":               LinkContainers,
	} {
//.........这里部分代码省略.........
开发者ID:baa-archieve，项目名称:docker，代码行数:101，代码来源:driver.go

示例3: InitDriver


//.........这里部分代码省略.........
		bip6, _, err := net.ParseCIDR(bridgeIPv6)
		if err != nil {
			return err
		}
		found := false
		for _, addrv6 := range addrsv6 {
			networkv6 = addrv6.(*net.IPNet)
			if networkv6.IP.Equal(bip6) {
				found = true
				break
			}
		}
		if !found {
			return fmt.Errorf("Bridge IPv6 does not match existing bridge configuration %s", bip6)
		}
	}

	networkv4 = addrv4.(*net.IPNet)

	if config.EnableIPv6 {
		if len(addrsv6) == 0 {
			return errors.New("IPv6 enabled but no IPv6 detected")
		}
		bridgeIPv6Addr = networkv6.IP
	}

	// Configure iptables for link support
	if config.EnableIptables {
		if err := setupIPTables(addrv4, config.InterContainerCommunication, config.EnableIpMasq); err != nil {
			logrus.Errorf("Error configuing iptables: %s", err)
			return err
		}

	}

	if config.EnableIpForward {
		// Enable IPv4 forwarding
		if err := ioutil.WriteFile("/proc/sys/net/ipv4/ip_forward", []byte{'1', '\n'}, 0644); err != nil {
			logrus.Warnf("WARNING: unable to enable IPv4 forwarding: %s\n", err)
		}

		if config.FixedCIDRv6 != "" {
			// Enable IPv6 forwarding
			if err := ioutil.WriteFile("/proc/sys/net/ipv6/conf/default/forwarding", []byte{'1', '\n'}, 0644); err != nil {
				logrus.Warnf("WARNING: unable to enable IPv6 default forwarding: %s\n", err)
			}
			if err := ioutil.WriteFile("/proc/sys/net/ipv6/conf/all/forwarding", []byte{'1', '\n'}, 0644); err != nil {
				logrus.Warnf("WARNING: unable to enable IPv6 all forwarding: %s\n", err)
			}
		}
	}

	// We can always try removing the iptables
	if err := iptables.RemoveExistingChain("DOCKER", iptables.Nat); err != nil {
		return err
	}

	if config.EnableIptables {
		_, err := iptables.NewChain("DOCKER", bridgeIface, iptables.Nat)
		if err != nil {
			return err
		}
		chain, err := iptables.NewChain("DOCKER", bridgeIface, iptables.Filter)
		if err != nil {
			return err
		}
		portMapper.SetIptablesChain(chain)
	}

	bridgeIPv4Network = networkv4
	if config.FixedCIDR != "" {
		_, subnet, err := net.ParseCIDR(config.FixedCIDR)
		if err != nil {
			return err
		}
		logrus.Debugf("Subnet: %v", subnet)
		if err := ipAllocator.RegisterSubnet(bridgeIPv4Network, subnet); err != nil {
			logrus.Errorf("Error registering subnet for IPv4 bridge network: %s", err)
			return err
		}
	}

	if config.FixedCIDRv6 != "" {
		_, subnet, err := net.ParseCIDR(config.FixedCIDRv6)
		if err != nil {
			return err
		}
		logrus.Debugf("Subnet: %v", subnet)
		if err := ipAllocator.RegisterSubnet(subnet, subnet); err != nil {
			logrus.Errorf("Error registering subnet for IPv6 bridge network: %s", err)
			return err
		}
		globalIPv6Network = subnet
	}

	// Block BridgeIP in IP allocator
	ipAllocator.RequestIP(bridgeIPv4Network, bridgeIPv4Network.IP)

	return nil
}
开发者ID:paultag，项目名称:docker，代码行数:101，代码来源:driver.go


注：本文中的github.com/docker/docker/pkg/iptables.RemoveExistingChain函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。