当前位置: 首页>>代码示例>>Golang>>正文


Golang Stream.Conn方法代码示例

本文整理汇总了Golang中github.com/djbarber/ipfs-hack/p2p/net.Stream.Conn方法的典型用法代码示例。如果您正苦于以下问题:Golang Stream.Conn方法的具体用法?Golang Stream.Conn怎么用?Golang Stream.Conn使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在github.com/djbarber/ipfs-hack/p2p/net.Stream的用法示例。


在下文中一共展示了Stream.Conn方法的13个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。

示例1: EchoStreamHandler

func EchoStreamHandler(stream inet.Stream) {
	go func() {
		defer stream.Close()

		// pull out the ipfs conn
		c := stream.Conn()
		log.Infof("%s ponging to %s", c.LocalPeer(), c.RemotePeer())

		buf := make([]byte, 4)

		for {
			if _, err := stream.Read(buf); err != nil {
				if err != io.EOF {
					log.Info("ping receive error:", err)
				}
				return
			}

			if !bytes.Equal(buf, []byte("ping")) {
				log.Infof("ping receive error: ping != %s %v", buf, buf)
				return
			}

			if _, err := stream.Write([]byte("pong")); err != nil {
				log.Info("pond send error:", err)
				return
			}
		}
	}()
}
开发者ID:djbarber,项目名称:ipfs-hack,代码行数:30,代码来源:swarm_test.go

示例2: EchoStreamHandler

func EchoStreamHandler(stream inet.Stream) {
	c := stream.Conn()
	log.Debugf("%s echoing %s", c.LocalPeer(), c.RemotePeer())
	go func() {
		defer stream.Close()
		io.Copy(stream, stream)
	}()
}
开发者ID:djbarber,项目名称:ipfs-hack,代码行数:8,代码来源:reconnect_test.go

示例3: HandleMessage

func (d *Diagnostics) HandleMessage(ctx context.Context, s inet.Stream) error {

	cr := ctxio.NewReader(ctx, s)
	cw := ctxio.NewWriter(ctx, s)
	r := ggio.NewDelimitedReader(cr, inet.MessageSizeMax) // maxsize
	w := ggio.NewDelimitedWriter(cw)

	// deserialize msg
	pmes := new(pb.Message)
	if err := r.ReadMsg(pmes); err != nil {
		log.Debugf("Failed to decode protobuf message: %v", err)
		return nil
	}

	// Print out diagnostic
	log.Infof("[peer: %s] Got message from [%s]\n",
		d.self.Pretty(), s.Conn().RemotePeer())

	// Make sure we havent already handled this request to prevent loops
	if err := d.startDiag(pmes.GetDiagID()); err != nil {
		return nil
	}

	resp := newMessage(pmes.GetDiagID())
	resp.Data = d.getDiagInfo().Marshal()
	if err := w.WriteMsg(resp); err != nil {
		log.Debugf("Failed to write protobuf message over stream: %s", err)
		return err
	}

	timeout := pmes.GetTimeoutDuration()
	if timeout < HopTimeoutDecrement {
		return fmt.Errorf("timeout too short: %s", timeout)
	}
	ctx, cancel := context.WithTimeout(ctx, timeout)
	defer cancel()
	pmes.SetTimeoutDuration(timeout - HopTimeoutDecrement)

	dpeers, err := d.getDiagnosticFromPeers(ctx, d.getPeers(), pmes)
	if err != nil {
		log.Debugf("diagnostic from peers err: %s", err)
		return err
	}
	for b := range dpeers {
		resp := newMessage(pmes.GetDiagID())
		resp.Data = b.Marshal()
		if err := w.WriteMsg(resp); err != nil {
			log.Debugf("Failed to write protobuf message over stream: %s", err)
			return err
		}
	}

	return nil
}
开发者ID:djbarber,项目名称:ipfs-hack,代码行数:54,代码来源:diag.go

示例4: ResponseHandler

func (ids *IDService) ResponseHandler(s inet.Stream) {
	defer s.Close()
	c := s.Conn()

	r := ggio.NewDelimitedReader(s, 2048)
	mes := pb.Identify{}
	if err := r.ReadMsg(&mes); err != nil {
		return
	}
	ids.consumeMessage(&mes, c)

	log.Debugf("%s received message from %s %s", ID,
		c.RemotePeer(), c.RemoteMultiaddr())
}
开发者ID:djbarber,项目名称:ipfs-hack,代码行数:14,代码来源:id.go

示例5: HandleSync

// HandleSync reads the next name off the Stream, and calls a handler function
// This is done synchronously. The handler function will return before
// HandleSync returns.
func (m *Mux) HandleSync(s inet.Stream) {
	ctx := context.Background()

	name, handler, err := m.ReadHeader(s)
	if err != nil {
		err = fmt.Errorf("protocol mux error: %s", err)
		log.Event(ctx, "muxError", lgbl.Error(err))
		s.Close()
		return
	}

	log.Debugf("muxer handle protocol %s: %s", s.Conn().RemotePeer(), name)
	handler(s)
}
开发者ID:djbarber,项目名称:ipfs-hack,代码行数:17,代码来源:mux.go

示例6: RequestHandler

func (ids *IDService) RequestHandler(s inet.Stream) {
	defer s.Close()
	c := s.Conn()

	bwc := ids.Host.GetBandwidthReporter()
	s = mstream.WrapStream(s, ID, bwc)

	w := ggio.NewDelimitedWriter(s)
	mes := pb.Identify{}
	ids.populateMessage(&mes, s.Conn())
	w.WriteMsg(&mes)

	log.Debugf("%s sent message to %s %s", ID,
		c.RemotePeer(), c.RemoteMultiaddr())
}
开发者ID:djbarber,项目名称:ipfs-hack,代码行数:15,代码来源:id.go

示例7: newStreamHandler

// newStreamHandler is the remote-opened stream handler for inet.Network
// TODO: this feels a bit wonky
func (h *BasicHost) newStreamHandler(s inet.Stream) {
	protoID, handle, err := h.Mux().ReadHeader(s)
	if err != nil {
		if err == io.EOF {
			log.Debugf("protocol EOF: %s", s.Conn().RemotePeer())
		} else {
			log.Warning("protocol mux failed: %s", err)
		}
		return
	}

	logStream := mstream.WrapStream(s, protoID, h.bwc)

	go handle(logStream)
}
开发者ID:djbarber,项目名称:ipfs-hack,代码行数:17,代码来源:basic_host.go

示例8: handleNewMessage

func (dht *IpfsDHT) handleNewMessage(s inet.Stream) {
	defer s.Close()

	ctx := dht.Context()
	cr := ctxio.NewReader(ctx, s) // ok to use. we defer close stream in this func
	cw := ctxio.NewWriter(ctx, s) // ok to use. we defer close stream in this func
	r := ggio.NewDelimitedReader(cr, inet.MessageSizeMax)
	w := ggio.NewDelimitedWriter(cw)
	mPeer := s.Conn().RemotePeer()

	// receive msg
	pmes := new(pb.Message)
	if err := r.ReadMsg(pmes); err != nil {
		log.Debugf("Error unmarshaling data: %s", err)
		return
	}

	// update the peer (on valid msgs only)
	dht.updateFromMessage(ctx, mPeer, pmes)

	// get handler for this msg type.
	handler := dht.handlerForMsgType(pmes.GetType())
	if handler == nil {
		log.Debug("got back nil handler from handlerForMsgType")
		return
	}

	// dispatch handler.
	rpmes, err := handler(ctx, mPeer, pmes)
	if err != nil {
		log.Debugf("handle message error: %s", err)
		return
	}

	// if nil response, return it before serializing
	if rpmes == nil {
		log.Debug("Got back nil response from request.")
		return
	}

	// send out response msg
	if err := w.WriteMsg(rpmes); err != nil {
		log.Debugf("send response error: %s", err)
		return
	}

	return
}
开发者ID:djbarber,项目名称:ipfs-hack,代码行数:48,代码来源:dht_net.go

示例9: HandleStream

func (lb *Loopback) HandleStream(s inet.Stream) {
	defer s.Close()
	pbr := ggio.NewDelimitedReader(s, inet.MessageSizeMax)
	var incoming dhtpb.Message
	if err := pbr.ReadMsg(&incoming); err != nil {
		log.Debug(err)
		return
	}
	ctx := context.TODO()
	outgoing := lb.Handler.HandleRequest(ctx, s.Conn().RemotePeer(), &incoming)

	pbw := ggio.NewDelimitedWriter(s)

	if err := pbw.WriteMsg(outgoing); err != nil {
		return // TODO logerr
	}
}
开发者ID:djbarber,项目名称:ipfs-hack,代码行数:17,代码来源:loopback.go

示例10: handleNewStream

// handleNewStream receives a new stream from the network.
func (bsnet *impl) handleNewStream(s inet.Stream) {
	defer s.Close()

	if bsnet.receiver == nil {
		return
	}

	received, err := bsmsg.FromNet(s)
	if err != nil {
		go bsnet.receiver.ReceiveError(err)
		log.Debugf("bitswap net handleNewStream from %s error: %s", s.Conn().RemotePeer(), err)
		return
	}

	p := s.Conn().RemotePeer()
	ctx := context.Background()
	log.Debugf("bitswap net handleNewStream from %s", s.Conn().RemotePeer())
	bsnet.receiver.ReceiveMessage(ctx, p, received)
}
开发者ID:djbarber,项目名称:ipfs-hack,代码行数:20,代码来源:ipfs_impl.go

示例11: HandleStream

func (p *standard) HandleStream(s inet.Stream) {
	// TODO(brian): Should clients be able to satisfy requests?
	log.Error("supernode client received (dropped) a routing message from", s.Conn().RemotePeer())
	s.Close()
}
开发者ID:djbarber,项目名称:ipfs-hack,代码行数:5,代码来源:standard.go

示例12: WrapStream

func WrapStream(base inet.Stream, pid protocol.ID, bwc metrics.Reporter) inet.Stream {
	return newMeteredStream(base, pid, base.Conn().RemotePeer(), bwc.LogRecvMessageStream, bwc.LogSentMessageStream)
}
开发者ID:djbarber,项目名称:ipfs-hack,代码行数:3,代码来源:metered.go

示例13: TestNotifications

func TestNotifications(t *testing.T) {
	ctx := context.Background()
	swarms := makeSwarms(ctx, t, 5)
	defer func() {
		for _, s := range swarms {
			s.Close()
		}
	}()

	timeout := 5 * time.Second

	// signup notifs
	notifiees := make([]*netNotifiee, len(swarms))
	for i, swarm := range swarms {
		n := newNetNotifiee()
		swarm.Notify(n)
		notifiees[i] = n
	}

	connectSwarms(t, ctx, swarms)

	<-time.After(time.Millisecond)
	// should've gotten 5 by now.

	// test everyone got the correct connection opened calls
	for i, s := range swarms {
		n := notifiees[i]
		notifs := make(map[peer.ID][]inet.Conn)
		for j, s2 := range swarms {
			if i == j {
				continue
			}

			// this feels a little sketchy, but its probably okay
			for len(s.ConnectionsToPeer(s2.LocalPeer())) != len(notifs[s2.LocalPeer()]) {
				select {
				case c := <-n.connected:
					nfp := notifs[c.RemotePeer()]
					notifs[c.RemotePeer()] = append(nfp, c)
				case <-time.After(timeout):
					t.Fatal("timeout")
				}
			}
		}

		for p, cons := range notifs {
			expect := s.ConnectionsToPeer(p)
			if len(expect) != len(cons) {
				t.Fatal("got different number of connections")
			}

			for _, c := range cons {
				var found bool
				for _, c2 := range expect {
					if c == c2 {
						found = true
						break
					}
				}

				if !found {
					t.Fatal("connection not found!")
				}
			}
		}
	}

	complement := func(c inet.Conn) (*Swarm, *netNotifiee, *Conn) {
		for i, s := range swarms {
			for _, c2 := range s.Connections() {
				if c.LocalMultiaddr().Equal(c2.RemoteMultiaddr()) &&
					c2.LocalMultiaddr().Equal(c.RemoteMultiaddr()) {
					return s, notifiees[i], c2
				}
			}
		}
		t.Fatal("complementary conn not found", c)
		return nil, nil, nil
	}

	testOCStream := func(n *netNotifiee, s inet.Stream) {
		var s2 inet.Stream
		select {
		case s2 = <-n.openedStream:
			t.Log("got notif for opened stream")
		case <-time.After(timeout):
			t.Fatal("timeout")
		}
		if s != s2 {
			t.Fatal("got incorrect stream", s.Conn(), s2.Conn())
		}

		select {
		case s2 = <-n.closedStream:
			t.Log("got notif for closed stream")
		case <-time.After(timeout):
			t.Fatal("timeout")
		}
		if s != s2 {
			t.Fatal("got incorrect stream", s.Conn(), s2.Conn())
//.........这里部分代码省略.........
开发者ID:djbarber,项目名称:ipfs-hack,代码行数:101,代码来源:swarm_notif_test.go


注:本文中的github.com/djbarber/ipfs-hack/p2p/net.Stream.Conn方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。