Golang dcrutil.Tx类代码示例

// AddUnconfirmedTx adds all addresses related to the transaction to the
// unconfirmed (memory-only) address index.
//
// NOTE: This transaction MUST have already been validated by the memory pool
// before calling this function with it and have all of the inputs available in
// the provided utxo view.  Failure to do so could result in some or all
// addresses not being indexed.
//
// This function is safe for concurrent access.
func (idx *AddrIndex) AddUnconfirmedTx(tx *dcrutil.Tx, utxoView *blockchain.UtxoViewpoint) {
	// Index addresses of all referenced previous transaction outputs.
	//
	// The existence checks are elided since this is only called after the
	// transaction has already been validated and thus all inputs are
	// already known to exist.
	msgTx := tx.MsgTx()
	isSSGen, _ := stake.IsSSGen(msgTx)
	for i, txIn := range msgTx.TxIn {
		// Skip stakebase.
		if i == 0 && isSSGen {
			continue
		}

		entry := utxoView.LookupEntry(&txIn.PreviousOutPoint.Hash)
		if entry == nil {
			// Ignore missing entries.  This should never happen
			// in practice since the function comments specifically
			// call out all inputs must be available.
			continue
		}
		version := entry.ScriptVersionByIndex(txIn.PreviousOutPoint.Index)
		pkScript := entry.PkScriptByIndex(txIn.PreviousOutPoint.Index)
		txType := entry.TransactionType()
		idx.indexUnconfirmedAddresses(version, pkScript, tx,
			txType == stake.TxTypeSStx)
	}

	// Index addresses of all created outputs.
	isSStx, _ := stake.IsSStx(msgTx)
	for _, txOut := range msgTx.TxOut {
		idx.indexUnconfirmedAddresses(txOut.Version, txOut.PkScript, tx,
			isSStx)
	}
}

// GetSSGenVoteBits takes an SSGen tx as input and scans through its
// outputs, returning the VoteBits of the index 1 output.
func GetSSGenVoteBits(tx *dcrutil.Tx) uint16 {
	msgTx := tx.MsgTx()

	votebits := binary.LittleEndian.Uint16(msgTx.TxOut[1].PkScript[2:4])

	return votebits
}

// ValidateTransactionScripts validates the scripts for the passed transaction
// using multiple goroutines.
func ValidateTransactionScripts(tx *dcrutil.Tx, utxoView *UtxoViewpoint, flags txscript.ScriptFlags, sigCache *txscript.SigCache) error {
	// Collect all of the transaction inputs and required information for
	// validation.
	txIns := tx.MsgTx().TxIn
	txValItems := make([]*txValidateItem, 0, len(txIns))
	for txInIdx, txIn := range txIns {
		// Skip coinbases.
		if txIn.PreviousOutPoint.Index == math.MaxUint32 {
			continue
		}

		txVI := &txValidateItem{
			txInIndex: txInIdx,
			txIn:      txIn,
			tx:        tx,
		}
		txValItems = append(txValItems, txVI)
	}

	// Validate all of the inputs.
	validator := newTxValidator(utxoView, flags, sigCache)
	if err := validator.Validate(txValItems); err != nil {
		return err
	}

	return nil

}

// IsFinalizedTransaction determines whether or not a transaction is finalized.
func IsFinalizedTransaction(tx *dcrutil.Tx, blockHeight int64,
	blockTime time.Time) bool {
	msgTx := tx.MsgTx()

	// Lock time of zero means the transaction is finalized.
	lockTime := msgTx.LockTime
	if lockTime == 0 {
		return true
	}

	// The lock time field of a transaction is either a block height at
	// which the transaction is finalized or a timestamp depending on if the
	// value is before the txscript.LockTimeThreshold.  When it is under the
	// threshold it is a block height.
	blockTimeOrHeight := int64(0)
	if lockTime < txscript.LockTimeThreshold {
		blockTimeOrHeight = blockHeight
	} else {
		blockTimeOrHeight = blockTime.Unix()
	}
	if int64(lockTime) < blockTimeOrHeight {
		return true
	}

	// At this point, the transaction's lock time hasn't occurred yet, but
	// the transaction might still be finalized if the sequence number
	// for all transaction inputs is maxed out.
	for _, txIn := range msgTx.TxIn {
		if txIn.Sequence != math.MaxUint32 {
			return false
		}
	}
	return true
}

// FetchTransactionStore fetches the input transactions referenced by the
// passed transaction from the point of view of the end of the main chain.  It
// also attempts to fetch the transaction itself so the returned TxStore can be
// examined for duplicate transactions.
// IsValid indicates if the current block on head has had its TxTreeRegular
// validated by the stake voters.
func (b *BlockChain) FetchTransactionStore(tx *dcrutil.Tx,
	isValid bool) (TxStore, error) {
	isSSGen, _ := stake.IsSSGen(tx)

	// Create a set of needed transactions from the transactions referenced
	// by the inputs of the passed transaction.  Also, add the passed
	// transaction itself as a way for the caller to detect duplicates.
	txNeededSet := make(map[chainhash.Hash]struct{})
	txNeededSet[*tx.Sha()] = struct{}{}
	for i, txIn := range tx.MsgTx().TxIn {
		// Skip all stakebase inputs.
		if isSSGen && (i == 0) {
			continue
		}

		txNeededSet[txIn.PreviousOutPoint.Hash] = struct{}{}
	}

	// Request the input transactions from the point of view of the end of
	// the main chain without including fully spent transactions in the
	// results.  Fully spent transactions are only needed for chain
	// reorganization which does not apply here.
	txStore := fetchTxStoreMain(b.db, txNeededSet, false)

	topBlock, err := b.getBlockFromHash(b.bestChain.hash)
	if err != nil {
		return nil, err
	}

	if isValid {
		connectTxTree(txStore, topBlock, true)
	}

	return txStore, nil
}

// calcPriority returns a transaction priority given a transaction and the sum
// of each of its input values multiplied by their age (# of confirmations).
// Thus, the final formula for the priority is:
// sum(inputValue * inputAge) / adjustedTxSize
func calcPriority(tx *dcrutil.Tx, inputValueAge float64) float64 {
	// In order to encourage spending multiple old unspent transaction
	// outputs thereby reducing the total set, don't count the constant
	// overhead for each input as well as enough bytes of the signature
	// script to cover a pay-to-script-hash redemption with a compressed
	// pubkey.  This makes additional inputs free by boosting the priority
	// of the transaction accordingly.  No more incentive is given to avoid
	// encouraging gaming future transactions through the use of junk
	// outputs.  This is the same logic used in the reference
	// implementation.
	//
	// The constant overhead for a txin is 41 bytes since the previous
	// outpoint is 36 bytes + 4 bytes for the sequence + 1 byte the
	// signature script length.
	//
	// A compressed pubkey pay-to-script-hash redemption with a maximum len
	// signature is of the form:
	// [OP_DATA_73 <73-byte sig> + OP_DATA_35 + {OP_DATA_33
	// <33 byte compresed pubkey> + OP_CHECKSIG}]
	//
	// Thus 1 + 73 + 1 + 1 + 33 + 1 = 110
	overhead := 0
	for _, txIn := range tx.MsgTx().TxIn {
		// Max inputs + size can't possibly overflow here.
		overhead += 41 + minInt(110, len(txIn.SignatureScript))
	}

	serializedTxSize := tx.MsgTx().SerializeSize()
	if overhead >= serializedTxSize {
		return 0.0
	}

	return inputValueAge / float64(serializedTxSize-overhead)
}

// GetSStxStakeOutputsInfo takes an SStx as input and scans through its outputs,
// returning the pubkeyhashs and amounts for any NullDataTy's (future commitments
// to stake generation rewards).
func GetSStxStakeOutputInfo(tx *dcrutil.Tx) ([]bool, [][]byte, []int64, []int64,
	[][]bool, [][]uint16) {
	msgTx := tx.MsgTx()

	isP2SH := make([]bool, len(msgTx.TxIn))
	addresses := make([][]byte, len(msgTx.TxIn))
	amounts := make([]int64, len(msgTx.TxIn))
	changeAmounts := make([]int64, len(msgTx.TxIn))
	allSpendRules := make([][]bool, len(msgTx.TxIn))
	allSpendLimits := make([][]uint16, len(msgTx.TxIn))

	// Cycle through the inputs and pull the proportional amounts
	// and commit to PKHs/SHs.
	for idx, out := range msgTx.TxOut {
		// We only care about the outputs where we get proportional
		// amounts and the PKHs/SHs to send rewards to, which is all
		// the odd numbered output indexes.
		if (idx > 0) && (idx%2 != 0) {
			// The MSB (sign), not used ever normally, encodes whether
			// or not it is a P2PKH or P2SH for the input.
			amtEncoded := make([]byte, 8, 8)
			copy(amtEncoded, out.PkScript[22:30])
			isP2SH[idx/2] = !(amtEncoded[7]&(1<<7) == 0) // MSB set?
			amtEncoded[7] &= ^uint8(1 << 7)              // Clear bit

			addresses[idx/2] = out.PkScript[2:22]
			amounts[idx/2] = int64(binary.LittleEndian.Uint64(amtEncoded))

			// Get flags and restrictions for the outputs to be
			// make in either a vote or revocation.
			spendRules := make([]bool, 2, 2)
			spendLimits := make([]uint16, 2, 2)

			// This bitflag is true/false.
			feeLimitUint16 := binary.LittleEndian.Uint16(out.PkScript[30:32])
			spendRules[0] = (feeLimitUint16 & SStxVoteFractionFlag) ==
				SStxVoteFractionFlag
			spendRules[1] = (feeLimitUint16 & SStxRevFractionFlag) ==
				SStxRevFractionFlag
			allSpendRules[idx/2] = spendRules

			// This is the fraction to use out of 64.
			spendLimits[0] = feeLimitUint16 & SStxVoteReturnFractionMask
			spendLimits[1] = feeLimitUint16 & SStxRevReturnFractionMask
			spendLimits[1] >>= 8
			allSpendLimits[idx/2] = spendLimits
		}

		// Here we only care about the change amounts, so scan
		// the change outputs (even indices) and save their
		// amounts.
		if (idx > 0) && (idx%2 == 0) {
			changeAmounts[(idx/2)-1] = out.Value
		}
	}

	return isP2SH, addresses, amounts, changeAmounts, allSpendRules,
		allSpendLimits
}

// matchTxAndUpdate returns true if the bloom filter matches data within the
// passed transaction, otherwise false is returned.  If the filter does match
// the passed transaction, it will also update the filter depending on the bloom
// update flags set via the loaded filter if needed.
//
// This function MUST be called with the filter lock held.
func (bf *Filter) matchTxAndUpdate(tx *dcrutil.Tx) bool {
	// Check if the filter matches the hash of the transaction.
	// This is useful for finding transactions when they appear in a block.
	matched := bf.matches(tx.Sha().Bytes())

	// Check if the filter matches any data elements in the public key
	// scripts of any of the outputs.  When it does, add the outpoint that
	// matched so transactions which spend from the matched transaction are
	// also included in the filter.  This removes the burden of updating the
	// filter for this scenario from the client.  It is also more efficient
	// on the network since it avoids the need for another filteradd message
	// from the client and avoids some potential races that could otherwise
	// occur.
	for i, txOut := range tx.MsgTx().TxOut {
		pushedData, err := txscript.PushedData(txOut.PkScript)
		if err != nil {
			continue
		}

		for _, data := range pushedData {
			if !bf.matches(data) {
				continue
			}

			matched = true
			bf.maybeAddOutpoint(txOut.Version, txOut.PkScript, tx.Sha(),
				uint32(i), tx.Tree())
			break
		}
	}

	// Nothing more to do if a match has already been made.
	if matched {
		return true
	}

	// At this point, the transaction and none of the data elements in the
	// public key scripts of its outputs matched.

	// Check if the filter matches any outpoints this transaction spends or
	// any any data elements in the signature scripts of any of the inputs.
	for _, txin := range tx.MsgTx().TxIn {
		if bf.matchesOutPoint(&txin.PreviousOutPoint) {
			return true
		}

		pushedData, err := txscript.PushedData(txin.SignatureScript)
		if err != nil {
			continue
		}
		for _, data := range pushedData {
			if bf.matches(data) {
				return true
			}
		}
	}

	return false
}

// isNullOutpoint determines whether or not a previous transaction output point
// is set.
func isNullOutpoint(tx *dcrutil.Tx) bool {
	nullInOP := tx.MsgTx().TxIn[0].PreviousOutPoint
	if nullInOP.Index == math.MaxUint32 && nullInOP.Hash.IsEqual(zeroHash) &&
		nullInOP.Tree == dcrutil.TxTreeRegular {
		return true
	}
	return false
}

func serializeTx(tx *dcrutil.Tx) []byte {
	var buf bytes.Buffer
	err := tx.MsgTx().Serialize(&buf)
	if err != nil {
		panic(err)
	}
	return buf.Bytes()
}

// isNonstandardTransaction determines whether a transaction contains any
// scripts which are not one of the standard types.
func isNonstandardTransaction(tx *dcrutil.Tx) bool {
	// Check all of the output public key scripts for non-standard scripts.
	for _, txOut := range tx.MsgTx().TxOut {
		scriptClass := txscript.GetScriptClass(txOut.Version, txOut.PkScript)
		if scriptClass == txscript.NonStandardTy {
			return true
		}
	}
	return false
}

// SetTxTree analyzes the embedded MsgTx and sets the transaction tree
// accordingly.
func SetTxTree(tx *dcrutil.Tx) {
	txType := DetermineTxType(tx.MsgTx())

	indicatedTree := wire.TxTreeRegular
	if txType != TxTypeRegular {
		indicatedTree = wire.TxTreeStake
	}

	tx.SetTree(indicatedTree)
}

// isNullFraudProof determines whether or not a previous transaction fraud proof
// is set.
func isNullFraudProof(tx *dcrutil.Tx) bool {
	txIn := tx.MsgTx().TxIn[0]
	switch {
	case txIn.BlockHeight != wire.NullBlockHeight:
		return false
	case txIn.BlockIndex != wire.NullBlockIndex:
		return false
	}

	return true
}

// FetchUtxoView loads utxo details about the input transactions referenced by
// the passed transaction from the point of view of the end of the main chain.
// It also attempts to fetch the utxo details for the transaction itself so the
// returned view can be examined for duplicate unspent transaction outputs.
//
// This function is safe for concurrent access however the returned view is NOT.
func (b *BlockChain) FetchUtxoView(tx *dcrutil.Tx, treeValid bool) (*UtxoViewpoint,
	error) {
	b.chainLock.RLock()
	defer b.chainLock.RUnlock()

	// Request the utxos from the point of view of the end of the main
	// chain.
	view := NewUtxoViewpoint()
	if treeValid {
		view.SetStakeViewpoint(ViewpointPrevValidRegular)
		block, err := b.fetchBlockFromHash(&b.bestNode.hash)
		if err != nil {
			return nil, err
		}
		parent, err := b.fetchBlockFromHash(&b.bestNode.header.PrevBlock)
		if err != nil {
			return nil, err
		}
		err = view.fetchInputUtxos(b.db, block, parent)
		if err != nil {
			return nil, err
		}
		for i, blockTx := range block.Transactions() {
			err := view.connectTransaction(blockTx, b.bestNode.height,
				uint32(i), nil)
			if err != nil {
				return nil, err
			}
		}
	}
	view.SetBestHash(&b.bestNode.hash)

	// Create a set of needed transactions based on those referenced by the
	// inputs of the passed transaction.  Also, add the passed transaction
	// itself as a way for the caller to detect duplicates that are not
	// fully spent.
	txNeededSet := make(map[chainhash.Hash]struct{})
	txNeededSet[*tx.Sha()] = struct{}{}
	msgTx := tx.MsgTx()
	isSSGen, _ := stake.IsSSGen(msgTx)
	if !IsCoinBaseTx(msgTx) {
		for i, txIn := range msgTx.TxIn {
			if isSSGen && i == 0 {
				continue
			}
			txNeededSet[txIn.PreviousOutPoint.Hash] = struct{}{}
		}
	}

	err := view.fetchUtxosMain(b.db, txNeededSet)

	return view, err
}

// GetSSGenBlockVotedOn takes an SSGen tx and returns the block voted on in the
// first OP_RETURN by hash and height.
func GetSSGenBlockVotedOn(tx *dcrutil.Tx) (chainhash.Hash, uint32, error) {
	msgTx := tx.MsgTx()

	// Get the block header hash.
	blockSha, err := chainhash.NewHash(msgTx.TxOut[0].PkScript[2:34])
	if err != nil {
		return chainhash.Hash{}, 0, err
	}

	// Get the block height.
	height := binary.LittleEndian.Uint32(msgTx.TxOut[0].PkScript[34:38])

	return *blockSha, height, nil
}