本文整理汇总了Golang中github.com/currantlabs/netlink/nl.NetlinkRequest.Execute方法的典型用法代码示例。如果您正苦于以下问题:Golang NetlinkRequest.Execute方法的具体用法?Golang NetlinkRequest.Execute怎么用?Golang NetlinkRequest.Execute使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类github.com/currantlabs/netlink/nl.NetlinkRequest
的用法示例。
在下文中一共展示了NetlinkRequest.Execute方法的5个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。
示例1: neighHandle
func neighHandle(neigh *Neigh, req *nl.NetlinkRequest) error {
var family int
if neigh.Family > 0 {
family = neigh.Family
} else {
family = nl.GetIPFamily(neigh.IP)
}
msg := Ndmsg{
Family: uint8(family),
Index: uint32(neigh.LinkIndex),
State: uint16(neigh.State),
Type: uint8(neigh.Type),
Flags: uint8(neigh.Flags),
}
req.AddData(&msg)
ipData := neigh.IP.To4()
if ipData == nil {
ipData = neigh.IP.To16()
}
dstData := nl.NewRtAttr(NDA_DST, ipData)
req.AddData(dstData)
hwData := nl.NewRtAttr(NDA_LLADDR, []byte(neigh.HardwareAddr))
req.AddData(hwData)
_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
return err
}
示例2: addrHandle
func addrHandle(link Link, addr *Addr, req *nl.NetlinkRequest) error {
base := link.Attrs()
if addr.Label != "" && !strings.HasPrefix(addr.Label, base.Name) {
return fmt.Errorf("label must begin with interface name")
}
ensureIndex(base)
family := nl.GetIPFamily(addr.IP)
msg := nl.NewIfAddrmsg(family)
msg.Index = uint32(base.Index)
msg.Scope = uint8(addr.Scope)
prefixlen, _ := addr.Mask.Size()
msg.Prefixlen = uint8(prefixlen)
req.AddData(msg)
var addrData []byte
if family == FAMILY_V4 {
addrData = addr.IP.To4()
} else {
addrData = addr.IP.To16()
}
localData := nl.NewRtAttr(syscall.IFA_LOCAL, addrData)
req.AddData(localData)
addressData := nl.NewRtAttr(syscall.IFA_ADDRESS, addrData)
req.AddData(addressData)
if addr.Flags != 0 {
b := make([]byte, 4)
native.PutUint32(b, uint32(addr.Flags))
flagsData := nl.NewRtAttr(IFA_FLAGS, b)
req.AddData(flagsData)
}
if addr.Label != "" {
labelData := nl.NewRtAttr(syscall.IFA_LABEL, nl.ZeroTerminated(addr.Label))
req.AddData(labelData)
}
_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
return err
}
示例3: execGetLink
func execGetLink(req *nl.NetlinkRequest) (Link, error) {
msgs, err := req.Execute(syscall.NETLINK_ROUTE, 0)
if err != nil {
if errno, ok := err.(syscall.Errno); ok {
if errno == syscall.ENODEV {
return nil, fmt.Errorf("Link not found")
}
}
return nil, err
}
switch {
case len(msgs) == 0:
return nil, fmt.Errorf("Link not found")
case len(msgs) == 1:
return linkDeserialize(msgs[0])
default:
return nil, fmt.Errorf("More than one link found")
}
}
示例4: ruleHandle
func ruleHandle(rule *Rule, req *nl.NetlinkRequest) error {
msg := nl.NewRtMsg()
msg.Family = syscall.AF_INET
var dstFamily uint8
var rtAttrs []*nl.RtAttr
if rule.Dst != nil && rule.Dst.IP != nil {
dstLen, _ := rule.Dst.Mask.Size()
msg.Dst_len = uint8(dstLen)
msg.Family = uint8(nl.GetIPFamily(rule.Dst.IP))
dstFamily = msg.Family
var dstData []byte
if msg.Family == syscall.AF_INET {
dstData = rule.Dst.IP.To4()
} else {
dstData = rule.Dst.IP.To16()
}
rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_DST, dstData))
}
if rule.Src != nil && rule.Src.IP != nil {
msg.Family = uint8(nl.GetIPFamily(rule.Src.IP))
if dstFamily != 0 && dstFamily != msg.Family {
return fmt.Errorf("source and destination ip are not the same IP family")
}
srcLen, _ := rule.Src.Mask.Size()
msg.Src_len = uint8(srcLen)
var srcData []byte
if msg.Family == syscall.AF_INET {
srcData = rule.Src.IP.To4()
} else {
srcData = rule.Src.IP.To16()
}
rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_SRC, srcData))
}
if rule.Table >= 0 {
msg.Table = uint8(rule.Table)
if rule.Table >= 256 {
msg.Table = syscall.RT_TABLE_UNSPEC
}
}
req.AddData(msg)
for i := range rtAttrs {
req.AddData(rtAttrs[i])
}
var (
b = make([]byte, 4)
native = nl.NativeEndian()
)
if rule.Priority >= 0 {
native.PutUint32(b, uint32(rule.Priority))
req.AddData(nl.NewRtAttr(nl.FRA_PRIORITY, b))
}
if rule.Mark >= 0 {
native.PutUint32(b, uint32(rule.Mark))
req.AddData(nl.NewRtAttr(nl.FRA_FWMARK, b))
}
if rule.Mask >= 0 {
native.PutUint32(b, uint32(rule.Mask))
req.AddData(nl.NewRtAttr(nl.FRA_FWMASK, b))
}
if rule.Flow >= 0 {
native.PutUint32(b, uint32(rule.Flow))
req.AddData(nl.NewRtAttr(nl.FRA_FLOW, b))
}
if rule.TunID > 0 {
native.PutUint32(b, uint32(rule.TunID))
req.AddData(nl.NewRtAttr(nl.FRA_TUN_ID, b))
}
if rule.Table >= 256 {
native.PutUint32(b, uint32(rule.Table))
req.AddData(nl.NewRtAttr(nl.FRA_TABLE, b))
}
if msg.Table > 0 {
if rule.SuppressPrefixlen >= 0 {
native.PutUint32(b, uint32(rule.SuppressPrefixlen))
req.AddData(nl.NewRtAttr(nl.FRA_SUPPRESS_PREFIXLEN, b))
}
if rule.SuppressIfgroup >= 0 {
native.PutUint32(b, uint32(rule.SuppressIfgroup))
req.AddData(nl.NewRtAttr(nl.FRA_SUPPRESS_IFGROUP, b))
}
}
if rule.IifName != "" {
req.AddData(nl.NewRtAttr(nl.FRA_IIFNAME, []byte(rule.IifName)))
}
if rule.OifName != "" {
req.AddData(nl.NewRtAttr(nl.FRA_OIFNAME, []byte(rule.OifName)))
}
if rule.Goto >= 0 {
msg.Type = nl.FR_ACT_NOP
native.PutUint32(b, uint32(rule.Goto))
req.AddData(nl.NewRtAttr(nl.FRA_GOTO, b))
}
_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
//.........这里部分代码省略.........
示例5: routeHandle
func routeHandle(route *Route, req *nl.NetlinkRequest, msg *nl.RtMsg) error {
if (route.Dst == nil || route.Dst.IP == nil) && route.Src == nil && route.Gw == nil {
return fmt.Errorf("one of Dst.IP, Src, or Gw must not be nil")
}
family := -1
var rtAttrs []*nl.RtAttr
if route.Dst != nil && route.Dst.IP != nil {
dstLen, _ := route.Dst.Mask.Size()
msg.Dst_len = uint8(dstLen)
dstFamily := nl.GetIPFamily(route.Dst.IP)
family = dstFamily
var dstData []byte
if dstFamily == FAMILY_V4 {
dstData = route.Dst.IP.To4()
} else {
dstData = route.Dst.IP.To16()
}
rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_DST, dstData))
}
if route.Src != nil {
srcFamily := nl.GetIPFamily(route.Src)
if family != -1 && family != srcFamily {
return fmt.Errorf("source and destination ip are not the same IP family")
}
family = srcFamily
var srcData []byte
if srcFamily == FAMILY_V4 {
srcData = route.Src.To4()
} else {
srcData = route.Src.To16()
}
// The commonly used src ip for routes is actually PREFSRC
rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_PREFSRC, srcData))
}
if route.Gw != nil {
gwFamily := nl.GetIPFamily(route.Gw)
if family != -1 && family != gwFamily {
return fmt.Errorf("gateway, source, and destination ip are not the same IP family")
}
family = gwFamily
var gwData []byte
if gwFamily == FAMILY_V4 {
gwData = route.Gw.To4()
} else {
gwData = route.Gw.To16()
}
rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_GATEWAY, gwData))
}
if route.Table > 0 {
if route.Table >= 256 {
msg.Table = syscall.RT_TABLE_UNSPEC
b := make([]byte, 4)
native.PutUint32(b, uint32(route.Table))
rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_TABLE, b))
} else {
msg.Table = uint8(route.Table)
}
}
if route.Priority > 0 {
b := make([]byte, 4)
native.PutUint32(b, uint32(route.Priority))
rtAttrs = append(rtAttrs, nl.NewRtAttr(syscall.RTA_PRIORITY, b))
}
if route.Tos > 0 {
msg.Tos = uint8(route.Tos)
}
if route.Protocol > 0 {
msg.Protocol = uint8(route.Protocol)
}
if route.Type > 0 {
msg.Type = uint8(route.Type)
}
msg.Scope = uint8(route.Scope)
msg.Family = uint8(family)
req.AddData(msg)
for _, attr := range rtAttrs {
req.AddData(attr)
}
var (
b = make([]byte, 4)
native = nl.NativeEndian()
)
native.PutUint32(b, uint32(route.LinkIndex))
req.AddData(nl.NewRtAttr(syscall.RTA_OIF, b))
_, err := req.Execute(syscall.NETLINK_ROUTE, 0)
return err
}