Golang Block.Transactions方法代码示例

// connectTransactions updates the passed map by applying transaction and
// spend information for all the transactions in the passed block.  Only
// transactions in the passed map are updated.
func connectTransactions(txStore TxStore, block *btcutil.Block) error {
	// Loop through all of the transactions in the block to see if any of
	// them are ones we need to update and spend based on the results map.
	for _, tx := range block.Transactions() {
		// Update the transaction store with the transaction information
		// if it's one of the requested transactions.
		msgTx := tx.MsgTx()
		if txD, exists := txStore[*tx.Sha()]; exists {
			txD.Tx = tx
			txD.BlockHeight = block.Height()
			txD.Spent = make([]bool, len(msgTx.TxOut))
			txD.Err = nil
		}

		// Spend the origin transaction output.
		for _, txIn := range msgTx.TxIn {
			originHash := &txIn.PreviousOutPoint.Hash
			originIndex := txIn.PreviousOutPoint.Index
			if originTx, exists := txStore[*originHash]; exists {
				if originIndex > uint32(len(originTx.Spent)) {
					continue
				}
				originTx.Spent[originIndex] = true
			}
		}
	}

	return nil
}

// NotifyBlockConnected creates and marshalls a JSON message to notify
// of a new block connected to the main chain.  The notification is sent
// to each connected wallet.
func (s *rpcServer) NotifyBlockConnected(block *btcutil.Block) {
	hash, err := block.Sha()
	if err != nil {
		rpcsLog.Error("Bad block; connected block notification dropped.")
		return
	}

	// TODO: remove int32 type conversion.
	ntfn := btcws.NewBlockConnectedNtfn(hash.String(),
		int32(block.Height()))
	mntfn, _ := json.Marshal(ntfn)
	s.ws.walletNotificationMaster <- mntfn

	// Inform any interested parties about txs mined in this block.
	s.ws.Lock()
	for _, tx := range block.Transactions() {
		if clist, ok := s.ws.minedTxNotifications[*tx.Sha()]; ok {
			var enext *list.Element
			for e := clist.Front(); e != nil; e = enext {
				enext = e.Next()
				c := e.Value.(walletChan)
				// TODO: remove int32 type conversion after
				// the int64 -> int32 switch is made.
				ntfn := btcws.NewTxMinedNtfn(tx.Sha().String(),
					hash.String(), int32(block.Height()),
					block.MsgBlock().Header.Timestamp.Unix(),
					tx.Index())
				mntfn, _ := json.Marshal(ntfn)
				c <- mntfn
				s.ws.removeMinedTxRequest(c, tx.Sha())
			}
		}
	}
	s.ws.Unlock()
}

// disconnectTransactions updates the passed map by undoing transaction and
// spend information for all transactions in the passed block.  Only
// transactions in the passed map are updated.
func disconnectTransactions(txStore TxStore, block *btcutil.Block) error {
	// Loop through all of the transactions in the block to see if any of
	// them are ones that need to be undone based on the transaction store.
	for _, tx := range block.Transactions() {
		// Clear this transaction from the transaction store if needed.
		// Only clear it rather than deleting it because the transaction
		// connect code relies on its presence to decide whether or not
		// to update the store and any transactions which exist on both
		// sides of a fork would otherwise not be updated.
		if txD, exists := txStore[*tx.Sha()]; exists {
			txD.Tx = nil
			txD.BlockHeight = 0
			txD.Spent = nil
			txD.Err = btcdb.ErrTxShaMissing
		}

		// Unspend the origin transaction output.
		for _, txIn := range tx.MsgTx().TxIn {
			originHash := &txIn.PreviousOutPoint.Hash
			originIndex := txIn.PreviousOutPoint.Index
			originTx, exists := txStore[*originHash]
			if exists && originTx.Tx != nil && originTx.Err == nil {
				if originIndex > uint32(len(originTx.Spent)) {
					continue
				}
				originTx.Spent[originIndex] = false
			}
		}
	}

	return nil
}

// NotifyBlockTXs creates and marshals a JSON message to notify wallets
// of new transactions (with both spent and unspent outputs) for a watched
// address.
func (s *rpcServer) NotifyBlockTXs(db btcdb.Db, block *btcutil.Block) {
	// Build a map of in-flight transactions to see if any of the inputs in
	// this block are referencing other transactions earlier in this block.
	txInFlight := map[btcwire.ShaHash]int{}
	transactions := block.Transactions()
	spent := make([][]bool, len(transactions))
	for i, tx := range transactions {
		spent[i] = make([]bool, len(tx.MsgTx().TxOut))
		txInFlight[*tx.Sha()] = i
	}

	// The newBlockNotifyCheckTxOut current needs spent data.  This can
	// this can ultimately be optimized out by making sure the notifications
	// are in order.  For now, just create the spent data.
	for i, tx := range transactions[1:] {
		for _, txIn := range tx.MsgTx().TxIn {
			originHash := &txIn.PreviousOutpoint.Hash
			if inFlightIndex, ok := txInFlight[*originHash]; ok &&
				i >= inFlightIndex {

				prevIndex := txIn.PreviousOutpoint.Index
				spent[inFlightIndex][prevIndex] = true
			}
		}
	}

	for i, tx := range transactions {
		go s.newBlockNotifyCheckTxIn(tx)
		go s.newBlockNotifyCheckTxOut(block, tx, spent[i])
	}
}

// DropAfterBlockBySha will remove any blocks from the database after
// the given block.
func (db *LevelDb) DropAfterBlockBySha(sha *btcwire.ShaHash) (rerr error) {
	db.dbLock.Lock()
	defer db.dbLock.Unlock()
	defer func() {
		if rerr == nil {
			rerr = db.processBatches()
		} else {
			db.lBatch().Reset()
		}
	}()

	startheight := db.nextBlock - 1

	keepidx, err := db.getBlkLoc(sha)
	if err != nil {
		// should the error here be normalized ?
		log.Tracef("block loc failed %v ", sha)
		return err
	}

	for height := startheight; height > keepidx; height = height - 1 {
		var blk *btcutil.Block
		blksha, buf, err := db.getBlkByHeight(height)
		if err != nil {
			return err
		}
		blk, err = btcutil.NewBlockFromBytes(buf)
		if err != nil {
			return err
		}

		for _, tx := range blk.MsgBlock().Transactions {
			err = db.unSpend(tx)
			if err != nil {
				return err
			}
		}
		// rather than iterate the list of tx backward, do it twice.
		for _, tx := range blk.Transactions() {
			var txUo txUpdateObj
			txUo.delete = true
			db.txUpdateMap[*tx.Sha()] = &txUo
		}
		db.lBatch().Delete(shaBlkToKey(blksha))
		db.lBatch().Delete(int64ToKey(height))
	}

	db.nextBlock = keepidx + 1

	return nil
}

// NewMerkleBlock returns a new *btcwire.MsgMerkleBlock and an array of the matched
// transaction hashes based on the passed block and filter.
func NewMerkleBlock(block *btcutil.Block, filter *Filter) (*btcwire.MsgMerkleBlock, []*btcwire.ShaHash) {
	numTx := uint32(len(block.Transactions()))
	mBlock := merkleBlock{
		numTx:       numTx,
		allHashes:   make([]*btcwire.ShaHash, 0, numTx),
		matchedBits: make([]byte, 0, numTx),
	}

	// Find and keep track of any transactions that match the filter.
	var matchedHashes []*btcwire.ShaHash
	for _, tx := range block.Transactions() {
		if filter.MatchTxAndUpdate(tx) {
			mBlock.matchedBits = append(mBlock.matchedBits, 0x01)
			matchedHashes = append(matchedHashes, tx.Sha())
		} else {
			mBlock.matchedBits = append(mBlock.matchedBits, 0x00)
		}
		mBlock.allHashes = append(mBlock.allHashes, tx.Sha())
	}

	// Calculate the number of merkle branches (height) in the tree.
	height := uint32(0)
	for mBlock.calcTreeWidth(height) > 1 {
		height++
	}

	// Build the depth-first partial merkle tree.
	mBlock.traverseAndBuild(height, 0)

	// Create and return the merkle block.
	msgMerkleBlock := btcwire.MsgMerkleBlock{
		Header:       block.MsgBlock().Header,
		Transactions: uint32(mBlock.numTx),
		Hashes:       make([]*btcwire.ShaHash, 0, len(mBlock.finalHashes)),
		Flags:        make([]byte, (len(mBlock.bits)+7)/8),
	}
	for _, sha := range mBlock.finalHashes {
		msgMerkleBlock.AddTxHash(sha)
	}
	for i := uint32(0); i < uint32(len(mBlock.bits)); i++ {
		msgMerkleBlock.Flags[i/8] |= mBlock.bits[i] << (i % 8)
	}
	return &msgMerkleBlock, matchedHashes
}

func MakeBlock(block *btcutil.Block, previous *Block) *Block {
	transactions := make([]ads.ADS, 0)
	for _, transaction := range block.Transactions() {
		t := &Transaction{
			MsgTx: *transaction.MsgTx(),
		}
		t.SetCachedHash(sha.Hash(*transaction.Sha()))

		transactions = append(transactions, t)
	}

	b := &Block{
		Header:       block.MsgBlock().Header,
		Previous:     previous,
		Transactions: transactions,
	}
	hash, _ := block.Sha()
	b.SetCachedHash(sha.Hash(*hash))

	return b
}

// checkBIP0030 ensures blocks do not contain duplicate transactions which
// 'overwrite' older transactions that are not fully spent.  This prevents an
// attack where a coinbase and all of its dependent transactions could be
// duplicated to effectively revert the overwritten transactions to a single
// confirmation thereby making them vulnerable to a double spend.
//
// For more details, see https://en.bitcoin.it/wiki/BIP_0030 and
// http://r6.ca/blog/20120206T005236Z.html.
func (b *BlockChain) checkBIP0030(node *blockNode, block *btcutil.Block) error {
	// Attempt to fetch duplicate transactions for all of the transactions
	// in this block from the point of view of the parent node.
	fetchSet := make(map[btcwire.ShaHash]struct{})
	for _, tx := range block.Transactions() {
		fetchSet[*tx.Sha()] = struct{}{}
	}
	txResults, err := b.fetchTxStore(node, fetchSet)
	if err != nil {
		return err
	}

	// Examine the resulting data about the requested transactions.
	for _, txD := range txResults {
		switch txD.Err {
		// A duplicate transaction was not found.  This is the most
		// common case.
		case btcdb.ErrTxShaMissing:
			continue

		// A duplicate transaction was found.  This is only allowed if
		// the duplicate transaction is fully spent.
		case nil:
			if !isTransactionSpent(txD) {
				str := fmt.Sprintf("tried to overwrite "+
					"transaction %v at block height %d "+
					"that is not fully spent", txD.Hash,
					txD.BlockHeight)
				return ruleError(ErrOverwriteTx, str)
			}

		// Some other unexpected error occurred.  Return it now.
		default:
			return txD.Err
		}
	}

	return nil
}

// checkBlockScripts executes and validates the scripts for all transactions in
// the passed block.
func checkBlockScripts(block *btcutil.Block, txStore TxStore) error {
	// Setup the script validation flags.  Blocks created after the BIP0016
	// activation time need to have the pay-to-script-hash checks enabled.
	var flags btcscript.ScriptFlags
	if block.MsgBlock().Header.Timestamp.After(btcscript.Bip16Activation) {
		flags |= btcscript.ScriptBip16
	}

	// Collect all of the transaction inputs and required information for
	// validation for all transactions in the block into a single slice.
	numInputs := 0
	for _, tx := range block.Transactions() {
		numInputs += len(tx.MsgTx().TxIn)
	}
	txValItems := make([]*txValidateItem, 0, numInputs)
	for _, tx := range block.Transactions() {
		for txInIdx, txIn := range tx.MsgTx().TxIn {
			// Skip coinbases.
			if txIn.PreviousOutpoint.Index == math.MaxUint32 {
				continue
			}

			txVI := &txValidateItem{
				txInIndex: txInIdx,
				txIn:      txIn,
				tx:        tx,
			}
			txValItems = append(txValItems, txVI)
		}
	}

	// Validate all of the inputs.
	validator := newTxValidator(txStore, flags)
	if err := validator.Validate(txValItems); err != nil {
		return err
	}

	return nil
}

func GetExodusTransactions(block *btcutil.Block) []*btcutil.Tx {
	var txs []*btcutil.Tx

	for _, tx := range block.Transactions() {
		mtx := tx.MsgTx()
		for _, txOut := range mtx.TxOut {
			// Extract the address from the script pub key
			addrs, _ := GetAddrs(txOut.PkScript)
			// Check each output address and if there's an address going to the exodus address
			// we add it to tx slice
			for _, addr := range addrs {
				if addr.Addr == ExodusAddress {
					txs = append(txs, tx)
					// Continue, we don't care if there are more exodus addresses
					continue
				}
			}
		}
	}

	return txs
}

// BuildMerkleTreeStore creates a merkle tree from block, stores it using a
// linear array, and returns a slice of the backing array.  A linear array was
// chosen as opposed to an actual tree structure since it uses about half as
// much memory.  The following describes a merkle tree and how it is stored in
// a linear array.
//
// A merkle tree is a tree in which every non-leaf node is the hash of its
// children nodes.  A diagram depicting how this works for bitcoin transactions
// where h(x) is a double sha256 follows:
//
//	         root = h1234 = h(h12 + h34)
//	        /                           \
//	  h12 = h(h1 + h2)            h34 = h(h3 + h4)
//	   /            \              /            \
//	h1 = h(tx1)  h2 = h(tx2)    h3 = h(tx3)  h4 = h(tx4)
//
// The above stored as a linear array is as follows:
//
// 	[h1 h2 h3 h4 h12 h34 root]
//
// As the above shows, the merkle root is always the last element in the array.
//
// The number of inputs is not always a power of two which results in a
// balanced tree structure as above.  In that case, parent nodes with no
// children are also zero and parent nodes with only a single left node
// are calculated by concatenating the left node with itself before hashing.
// Since this function uses nodes that are pointers to the hashes, empty nodes
// will be nil.
func BuildMerkleTreeStore(block *btcutil.Block) []*btcwire.ShaHash {
	// Calculate how many entries are required to hold the binary merkle
	// tree as a linear array and create an array of that size.
	nextPoT := nextPowerOfTwo(len(block.Transactions()))
	arraySize := nextPoT*2 - 1
	merkles := make([]*btcwire.ShaHash, arraySize)

	// Create the base transaction shas and populate the array with them.
	for i, tx := range block.Transactions() {
		merkles[i] = tx.Sha()
	}

	// Start the array offset after the last transaction and adjusted to the
	// next power of two.
	offset := nextPoT
	for i := 0; i < arraySize-1; i += 2 {
		switch {
		// When there is no left child node, the parent is nil too.
		case merkles[i] == nil:
			merkles[offset] = nil

		// When there is no right child, the parent is generated by
		// hashing the concatenation of the left child with itself.
		case merkles[i+1] == nil:
			newSha := hashMerkleBranches(merkles[i], merkles[i])
			merkles[offset] = newSha

		// The normal case sets the parent node to the double sha256
		// of the concatentation of the left and right children.
		default:
			newSha := hashMerkleBranches(merkles[i], merkles[i+1])
			merkles[offset] = newSha
		}
		offset++
	}

	return merkles
}

// rescanBlock rescans all transactions in a single block.  This is a
// helper function for handleRescan.
func rescanBlock(s *rpcServer, cmd *btcws.RescanCmd, c handlerChans, blk *btcutil.Block) {
	for _, tx := range blk.Transactions() {
		var txReply *btcdb.TxListReply
	txouts:
		for txOutIdx, txout := range tx.MsgTx().TxOut {
			_, addrs, _, err := btcscript.ExtractPkScriptAddrs(
				txout.PkScript, s.server.btcnet)
			if err != nil {
				continue txouts
			}

			for _, addr := range addrs {
				encodedAddr := addr.EncodeAddress()
				if _, ok := cmd.Addresses[encodedAddr]; !ok {
					continue
				}
				// TODO(jrick): This lookup is expensive and can be avoided
				// if the wallet is sent the previous outpoints for all inputs
				// of the tx, so any can removed from the utxo set (since
				// they are, as of this tx, now spent).
				if txReply == nil {
					txReplyList, err := s.server.db.FetchTxBySha(tx.Sha())
					if err != nil {
						rpcsLog.Errorf("Tx Sha %v not found by db", tx.Sha())
						continue txouts
					}
					for i := range txReplyList {
						if txReplyList[i].Height == blk.Height() {
							txReply = txReplyList[i]
							break
						}
					}

				}

				// Sha never errors.
				blksha, _ := blk.Sha()

				ntfn := &btcws.ProcessedTxNtfn{
					Receiver:    encodedAddr,
					Amount:      txout.Value,
					TxID:        tx.Sha().String(),
					TxOutIndex:  uint32(txOutIdx),
					PkScript:    hex.EncodeToString(txout.PkScript),
					BlockHash:   blksha.String(),
					BlockHeight: int32(blk.Height()),
					BlockIndex:  tx.Index(),
					BlockTime:   blk.MsgBlock().Header.Timestamp.Unix(),
					Spent:       txReply.TxSpent[txOutIdx],
				}

				select {
				case <-c.disconnected:
					return

				default:
					c.n <- ntfn
				}
			}
		}
	}
}

// IsCheckpointCandidate returns whether or not the passed block is a good
// checkpoint candidate.
//
// The factors used to determine a good checkpoint are:
//  - The block must be in the main chain
//  - The block must be at least 'CheckpointConfirmations' blocks prior to the
//    current end of the main chain
//  - The timestamps for the blocks before and after the checkpoint must have
//    timestamps which are also before and after the checkpoint, respectively
//    (due to the median time allowance this is not always the case)
//  - The block must not contain any strange transaction such as those with
//    nonstandard scripts
func (b *BlockChain) IsCheckpointCandidate(block *btcutil.Block) (bool, error) {
	// Checkpoints must be enabled.
	if b.noCheckpoints {
		return false, fmt.Errorf("checkpoints are disabled")
	}

	blockHash, err := block.Sha()
	if err != nil {
		return false, err
	}

	// A checkpoint must be in the main chain.
	if !b.db.ExistsSha(blockHash) {
		return false, nil
	}

	// A checkpoint must be at least CheckpointConfirmations blocks before
	// the end of the main chain.
	blockHeight := block.Height()
	_, mainChainHeight, err := b.db.NewestSha()
	if err != nil {
		return false, err
	}
	if blockHeight > (mainChainHeight - CheckpointConfirmations) {
		return false, nil
	}

	// Get the previous block.
	prevHash := &block.MsgBlock().Header.PrevBlock
	prevBlock, err := b.db.FetchBlockBySha(prevHash)
	if err != nil {
		return false, err
	}

	// Get the next block.
	nextHash, err := b.db.FetchBlockShaByHeight(blockHeight + 1)
	if err != nil {
		return false, err
	}
	nextBlock, err := b.db.FetchBlockBySha(nextHash)
	if err != nil {
		return false, err
	}

	// A checkpoint must have timestamps for the block and the blocks on
	// either side of it in order (due to the median time allowance this is
	// not always the case).
	prevTime := prevBlock.MsgBlock().Header.Timestamp
	curTime := block.MsgBlock().Header.Timestamp
	nextTime := nextBlock.MsgBlock().Header.Timestamp
	if prevTime.After(curTime) || nextTime.Before(curTime) {
		return false, nil
	}

	// A checkpoint must have transactions that only contain standard
	// scripts.
	for _, tx := range block.Transactions() {
		if isNonstandardTransaction(tx) {
			return false, nil
		}
	}

	return true, nil
}

// NotifyBlockTXs creates and marshals a JSON message to notify wallets
// of new transactions (with both spent and unspent outputs) for a watched
// address.
func (s *rpcServer) NotifyBlockTXs(db btcdb.Db, block *btcutil.Block) {
	for _, tx := range block.Transactions() {
		s.newBlockNotifyCheckTxIn(tx)
		s.NotifyForTxOuts(tx, block)
	}
}

// checkBlockSanity performs some preliminary checks on a block to ensure it is
// sane before continuing with block processing.  These checks are context free.
//
// The flags do not modify the behavior of this function directly, however they
// are needed to pass along to checkProofOfWork.
func checkBlockSanity(block *btcutil.Block, powLimit *big.Int, flags BehaviorFlags) error {
	// A block must have at least one transaction.
	msgBlock := block.MsgBlock()
	numTx := len(msgBlock.Transactions)
	if numTx == 0 {
		return ruleError(ErrNoTransactions, "block does not contain "+
			"any transactions")
	}

	// A block must not have more transactions than the max block payload.
	if numTx > btcwire.MaxBlockPayload {
		str := fmt.Sprintf("block contains too many transactions - "+
			"got %d, max %d", numTx, btcwire.MaxBlockPayload)
		return ruleError(ErrTooManyTransactions, str)
	}

	// A block must not exceed the maximum allowed block payload when
	// serialized.
	serializedSize := msgBlock.SerializeSize()
	if serializedSize > btcwire.MaxBlockPayload {
		str := fmt.Sprintf("serialized block is too big - got %d, "+
			"max %d", serializedSize, btcwire.MaxBlockPayload)
		return ruleError(ErrBlockTooBig, str)
	}

	// Ensure the proof of work bits in the block header is in min/max range
	// and the block hash is less than the target value described by the
	// bits.
	err := checkProofOfWork(block, powLimit, flags)
	if err != nil {
		return err
	}

	// A block timestamp must not have a greater precision than one second.
	// This check is necessary because Go time.Time values support
	// nanosecond precision whereas the consensus rules only apply to
	// seconds and it's much nicer to deal with standard Go time values
	// instead of converting to seconds everywhere.
	header := &block.MsgBlock().Header
	if !header.Timestamp.Equal(time.Unix(header.Timestamp.Unix(), 0)) {
		str := fmt.Sprintf("block timestamp of %v has a higher "+
			"precision than one second", header.Timestamp)
		return ruleError(ErrInvalidTime, str)
	}

	// Ensure the block time is not too far in the future.
	maxTimestamp := time.Now().Add(time.Second * MaxTimeOffsetSeconds)
	if header.Timestamp.After(maxTimestamp) {
		str := fmt.Sprintf("block timestamp of %v is too far in the "+
			"future", header.Timestamp)
		return ruleError(ErrTimeTooNew, str)
	}

	// The first transaction in a block must be a coinbase.
	transactions := block.Transactions()
	if !IsCoinBase(transactions[0]) {
		return ruleError(ErrFirstTxNotCoinbase, "first transaction in "+
			"block is not a coinbase")
	}

	// A block must not have more than one coinbase.
	for i, tx := range transactions[1:] {
		if IsCoinBase(tx) {
			str := fmt.Sprintf("block contains second coinbase at "+
				"index %d", i)
			return ruleError(ErrMultipleCoinbases, str)
		}
	}

	// Do some preliminary checks on each transaction to ensure they are
	// sane before continuing.
	for _, tx := range transactions {
		err := CheckTransactionSanity(tx)
		if err != nil {
			return err
		}
	}

	// Build merkle tree and ensure the calculated merkle root matches the
	// entry in the block header.  This also has the effect of caching all
	// of the transaction hashes in the block to speed up future hash
	// checks.  Bitcoind builds the tree here and checks the merkle root
	// after the following checks, but there is no reason not to check the
	// merkle root matches here.
	merkles := BuildMerkleTreeStore(block.Transactions())
	calculatedMerkleRoot := merkles[len(merkles)-1]
	if !header.MerkleRoot.IsEqual(calculatedMerkleRoot) {
		str := fmt.Sprintf("block merkle root is invalid - block "+
			"header indicates %v, but calculated value is %v",
			header.MerkleRoot, calculatedMerkleRoot)
		return ruleError(ErrBadMerkleRoot, str)
	}

	// Check for duplicate transactions.  This check will be fairly quick
	// since the transaction hashes are already cached due to building the
//.........这里部分代码省略.........