当前位置: 首页>>代码示例>>Golang>>正文


Golang Stopper.AddCloser方法代码示例

本文整理汇总了Golang中github.com/cockroachdb/cockroach/util/stop.Stopper.AddCloser方法的典型用法代码示例。如果您正苦于以下问题:Golang Stopper.AddCloser方法的具体用法?Golang Stopper.AddCloser怎么用?Golang Stopper.AddCloser使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在github.com/cockroachdb/cockroach/util/stop.Stopper的用法示例。


在下文中一共展示了Stopper.AddCloser方法的9个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。

示例1: StartWithStopper

// StartWithStopper is the same as Start, but allows passing a stopper
// explicitly.
func (ts *TestServer) StartWithStopper(stopper *stop.Stopper) error {
	if ts.Ctx == nil {
		ts.Ctx = NewTestContext()
	}

	if stopper == nil {
		stopper = stop.NewStopper()
	}

	// Change the replication requirements so we don't get log spam
	// about ranges not being replicated enough.
	// TODO(marc): set this in the zones table when we have an entry
	// for the default cluster-wide zone config and remove these
	// shenanigans about mutating the global default.
	oldDefaultZC := proto.Clone(config.DefaultZoneConfig).(*config.ZoneConfig)
	config.DefaultZoneConfig.ReplicaAttrs = []roachpb.Attributes{{}}
	stopper.AddCloser(stop.CloserFn(func() {
		config.DefaultZoneConfig = oldDefaultZC
	}))

	var err error
	ts.Server, err = NewServer(ts.Ctx, stopper)
	if err != nil {
		return err
	}

	// Ensure we have the correct number of engines. Add in in-memory ones where
	// needed.  There must be at least one store/engine.
	if ts.StoresPerNode < 1 {
		ts.StoresPerNode = 1
	}
	for i := len(ts.Ctx.Engines); i < ts.StoresPerNode; i++ {
		ts.Ctx.Engines = append(ts.Ctx.Engines, engine.NewInMem(roachpb.Attributes{}, 100<<20, ts.Server.stopper))
	}

	if !ts.SkipBootstrap {
		stopper := stop.NewStopper()
		_, err := BootstrapCluster("cluster-1", ts.Ctx.Engines, stopper)
		if err != nil {
			return util.Errorf("could not bootstrap cluster: %s", err)
		}
		stopper.Stop()
	}
	if err := ts.Server.Start(true); err != nil {
		return err
	}

	// If enabled, wait for initial splits to complete before returning control.
	// If initial splits do not complete, the server is stopped before
	// returning.
	if config.TestingTableSplitsDisabled() {
		return nil
	}
	if err := ts.WaitForInitialSplits(); err != nil {
		ts.Stop()
		return err
	}

	return nil
}
开发者ID:l2x,项目名称:cockroach,代码行数:62,代码来源:testserver.go

示例2: TestingSetupZoneConfigHook

// TestingSetupZoneConfigHook initializes the zone config hook
// to 'testingZoneConfigHook' which uses 'testingZoneConfig'.
// Settings go back to their previous values when the stopper runs our closer.
func TestingSetupZoneConfigHook(stopper *stop.Stopper) {
	testingLock.Lock()
	defer testingLock.Unlock()
	if testingHasHook {
		panic("TestingSetupZoneConfigHook called without restoring state")
	}
	testingHasHook = true
	testingZoneConfig = map[uint32]*ZoneConfig{}
	testingPreviousHook = ZoneConfigHook
	ZoneConfigHook = testingZoneConfigHook
	testingLargestIDHook = func(maxID uint32) (max uint32) {
		testingLock.Lock()
		defer testingLock.Unlock()
		for id := range testingZoneConfig {
			if maxID > 0 && id > maxID {
				continue
			}
			if id > max {
				max = id
			}
		}
		return
	}

	stopper.AddCloser(stop.CloserFn(testingResetZoneConfigHook))
}
开发者ID:CubeLite,项目名称:cockroach,代码行数:29,代码来源:testutil.go

示例3: start

// start starts the node by registering the storage instance for the
// RPC service "Node" and initializing stores for each specified
// engine. Launches periodic store gossiping in a goroutine.
func (n *Node) start(rpcServer *rpc.Server, engines []engine.Engine,
	attrs proto.Attributes, stopper *stop.Stopper) error {
	n.initDescriptor(rpcServer.Addr(), attrs)
	if err := rpcServer.RegisterName("Node", (*nodeServer)(n)); err != nil {
		log.Fatalf("unable to register node service with RPC server: %s", err)
	}

	// Start status monitor.
	n.status.StartMonitorFeed(n.ctx.EventFeed)
	stopper.AddCloser(n.ctx.EventFeed)

	// Initialize stores, including bootstrapping new ones.
	if err := n.initStores(engines, stopper); err != nil {
		return err
	}

	n.startedAt = n.ctx.Clock.Now().WallTime

	// Initialize publisher for Node Events. This requires the NodeID, which is
	// initialized by initStores(); because of this, some Store initialization
	// events will precede the StartNodeEvent on the feed.
	n.feed = status.NewNodeEventFeed(n.Descriptor.NodeID, n.ctx.EventFeed)
	n.feed.StartNode(n.Descriptor, n.startedAt)

	n.startPublishStatuses(stopper)
	n.startGossip(stopper)
	log.Infoc(n.context(), "Started node with %v engine(s) and attributes %v", engines, attrs.Attrs)
	return nil
}
开发者ID:Gardenya,项目名称:cockroach,代码行数:32,代码来源:node.go

示例4: StartWithStopper

// StartWithStopper is the same as Start, but allows passing a stopper
// explicitly.
func (ts *TestServer) StartWithStopper(stopper *stop.Stopper) error {
	if ts.Ctx == nil {
		ctx := MakeTestContext()
		ts.Ctx = &ctx
	}

	if stopper == nil {
		stopper = stop.NewStopper()
	}

	// Change the replication requirements so we don't get log spam about ranges
	// not being replicated enough.
	cfg := config.DefaultZoneConfig()
	cfg.ReplicaAttrs = []roachpb.Attributes{{}}
	fn := config.TestingSetDefaultZoneConfig(cfg)
	stopper.AddCloser(stop.CloserFn(fn))

	// Needs to be called before NewServer to ensure resolvers are initialized.
	if err := ts.Ctx.InitNode(); err != nil {
		return err
	}

	// Ensure we have the correct number of engines. Add in-memory ones where
	// needed. There must be at least one store/engine.
	if ts.StoresPerNode < 1 {
		ts.StoresPerNode = 1
	}
	for i := len(ts.Ctx.Engines); i < ts.StoresPerNode; i++ {
		ts.Ctx.Engines = append(ts.Ctx.Engines, engine.NewInMem(roachpb.Attributes{}, 100<<20, stopper))
	}

	var err error
	ts.Server, err = NewServer(*ts.Ctx, stopper)
	if err != nil {
		return err
	}
	// Our context must be shared with our server.
	ts.Ctx = &ts.Server.ctx

	if err := ts.Server.Start(); err != nil {
		return err
	}

	// If enabled, wait for initial splits to complete before returning control.
	// If initial splits do not complete, the server is stopped before
	// returning.
	if config.TestingTableSplitsDisabled() {
		return nil
	}
	if err := ts.WaitForInitialSplits(); err != nil {
		ts.Stop()
		return err
	}

	return nil
}
开发者ID:JKhawaja,项目名称:cockroach,代码行数:58,代码来源:testserver.go

示例5: NewMultiRaft

// NewMultiRaft creates a MultiRaft object.
func NewMultiRaft(nodeID roachpb.NodeID, storeID roachpb.StoreID, config *Config, stopper *stop.Stopper) (*MultiRaft, error) {
	if nodeID <= 0 {
		return nil, util.Errorf("invalid NodeID: %s", nodeID)
	}
	if storeID <= 0 {
		return nil, util.Errorf("invalid StoreID: %s", storeID)
	}
	if err := config.validate(); err != nil {
		return nil, err
	}

	if config.Ticker == nil {
		config.Ticker = newTicker(config.TickInterval)
		stopper.AddCloser(config.Ticker)
	}

	if config.EntryFormatter != nil {
		// Wrap the EntryFormatter to strip off the command id.
		ef := config.EntryFormatter
		config.EntryFormatter = func(data []byte) string {
			if len(data) == 0 {
				return "[empty]"
			}
			id, cmd := decodeCommand(data)
			formatted := ef(cmd)
			return fmt.Sprintf("%x: %s", id, formatted)
		}
	}

	m := &MultiRaft{
		Config:  *config,
		stopper: stopper,
		nodeID:  nodeID,
		storeID: storeID,

		// Output channel.
		Events: make(chan []interface{}),

		// Input channels.
		reqChan:         make(chan *RaftMessageRequest, reqBufferSize),
		createGroupChan: make(chan createGroupOp),
		removeGroupChan: make(chan removeGroupOp),
		proposalChan:    make(chan *proposal),
		campaignChan:    make(chan roachpb.RangeID),
		callbackChan:    make(chan func()),
		statusChan:      make(chan statusOp),
	}

	if err := m.Transport.Listen(storeID, (*multiraftServer)(m)); err != nil {
		return nil, err
	}

	return m, nil
}
开发者ID:haint504,项目名称:cockroach,代码行数:55,代码来源:multiraft.go

示例6: start

// start starts the node by registering the storage instance for the
// RPC service "Node" and initializing stores for each specified
// engine. Launches periodic store gossiping in a goroutine.
func (n *Node) start(rpcServer *rpc.Server, engines []engine.Engine,
	attrs proto.Attributes, stopper *stop.Stopper) error {
	n.initDescriptor(rpcServer.Addr(), attrs)
	requests := []proto.Request{
		&proto.GetRequest{},
		&proto.PutRequest{},
		&proto.ConditionalPutRequest{},
		&proto.IncrementRequest{},
		&proto.DeleteRequest{},
		&proto.DeleteRangeRequest{},
		&proto.ScanRequest{},
		&proto.EndTransactionRequest{},
		&proto.AdminSplitRequest{},
		&proto.AdminMergeRequest{},
		&proto.InternalRangeLookupRequest{},
		&proto.InternalHeartbeatTxnRequest{},
		&proto.InternalGCRequest{},
		&proto.InternalPushTxnRequest{},
		&proto.InternalResolveIntentRequest{},
		&proto.InternalResolveIntentRangeRequest{},
		&proto.InternalMergeRequest{},
		&proto.InternalTruncateLogRequest{},
		&proto.InternalLeaderLeaseRequest{},
	}
	for _, r := range requests {
		if err := rpcServer.Register("Node."+r.Method().String(), n.executeCmd, r); err != nil {
			log.Fatalf("unable to register node service with RPC server: %s", err)
		}
	}

	// Start status monitor.
	n.status.StartMonitorFeed(n.ctx.EventFeed)
	stopper.AddCloser(n.ctx.EventFeed)

	// Initialize stores, including bootstrapping new ones.
	if err := n.initStores(engines, stopper); err != nil {
		return err
	}

	n.startedAt = n.ctx.Clock.Now().WallTime

	// Initialize publisher for Node Events. This requires the NodeID, which is
	// initialized by initStores(); because of this, some Store initialization
	// events will precede the StartNodeEvent on the feed.
	n.feed = status.NewNodeEventFeed(n.Descriptor.NodeID, n.ctx.EventFeed)
	n.feed.StartNode(n.Descriptor, n.startedAt)

	n.startPublishStatuses(stopper)
	n.startGossip(stopper)
	log.Infoc(n.context(), "Started node with %v engine(s) and attributes %v", engines, attrs.Attrs)
	return nil
}
开发者ID:backend2use,项目名称:cockroachdb,代码行数:55,代码来源:node.go

示例7: NewMultiRaft

// NewMultiRaft creates a MultiRaft object.
func NewMultiRaft(nodeID proto.RaftNodeID, config *Config, stopper *stop.Stopper) (*MultiRaft, error) {
	if nodeID == 0 {
		return nil, util.Error("Invalid RaftNodeID")
	}
	if err := config.validate(); err != nil {
		return nil, err
	}

	if config.Ticker == nil {
		config.Ticker = newTicker(config.TickInterval)
		stopper.AddCloser(config.Ticker)
	}

	if config.EntryFormatter != nil {
		// Wrap the EntryFormatter to strip off the command id.
		ef := config.EntryFormatter
		config.EntryFormatter = func(data []byte) string {
			if len(data) == 0 {
				return "[empty]"
			}
			id, cmd := decodeCommand(data)
			formatted := ef(cmd)
			return fmt.Sprintf("%x: %s", id, formatted)
		}
	}

	m := &MultiRaft{
		Config:    *config,
		stopper:   stopper,
		multiNode: raft.StartMultiNode(uint64(nodeID)),
		nodeID:    nodeID,

		// Output channel.
		Events: make(chan interface{}, config.EventBufferSize),

		// Input channels.
		reqChan:         make(chan *RaftMessageRequest, reqBufferSize),
		createGroupChan: make(chan *createGroupOp),
		removeGroupChan: make(chan *removeGroupOp),
		proposalChan:    make(chan *proposal),
		callbackChan:    make(chan func()),
	}

	if err := m.Transport.Listen(nodeID, (*multiraftServer)(m)); err != nil {
		return nil, err
	}

	return m, nil
}
开发者ID:cluo,项目名称:cockroach,代码行数:50,代码来源:multiraft.go

示例8: New

// New creates an instance of a gossip node.
func New(
	ctx context.Context,
	rpcContext *rpc.Context,
	grpcServer *grpc.Server,
	resolvers []resolver.Resolver,
	stopper *stop.Stopper,
	registry *metric.Registry,
) *Gossip {
	ctx = log.WithEventLog(ctx, "gossip", "gossip")
	g := &Gossip{
		ctx:               ctx,
		Connected:         make(chan struct{}),
		rpcContext:        rpcContext,
		server:            newServer(ctx, stopper, registry),
		outgoing:          makeNodeSet(minPeers, metric.NewGauge(MetaConnectionsOutgoingGauge)),
		bootstrapping:     map[string]struct{}{},
		disconnected:      make(chan *client, 10),
		stalledCh:         make(chan struct{}, 1),
		stallInterval:     defaultStallInterval,
		bootstrapInterval: defaultBootstrapInterval,
		cullInterval:      defaultCullInterval,
		nodeDescs:         map[roachpb.NodeID]*roachpb.NodeDescriptor{},
		resolverAddrs:     map[util.UnresolvedAddr]resolver.Resolver{},
		bootstrapAddrs:    map[util.UnresolvedAddr]struct{}{},
	}
	stopper.AddCloser(stop.CloserFn(func() {
		log.FinishEventLog(ctx)
	}))

	registry.AddMetric(g.outgoing.gauge)
	g.clientsMu.breakers = map[string]*circuit.Breaker{}
	log.Infof(g.ctx, "initial resolvers: %s", resolvers)
	g.SetResolvers(resolvers)

	g.mu.Lock()
	// Add ourselves as a SystemConfig watcher.
	g.mu.is.registerCallback(KeySystemConfig, g.updateSystemConfig)
	// Add ourselves as a node descriptor watcher.
	g.mu.is.registerCallback(MakePrefixPattern(KeyNodeIDPrefix), g.updateNodeAddress)
	g.mu.Unlock()

	RegisterGossipServer(grpcServer, g.server)
	return g
}
开发者ID:yaojingguo,项目名称:cockroach,代码行数:45,代码来源:gossip.go

示例9: newTestCluster

func newTestCluster(transport Transport, size int, stopper *stop.Stopper, t *testing.T) *testCluster {
	if transport == nil {
		transport = NewLocalRPCTransport(stopper)
	}
	stopper.AddCloser(transport)
	cluster := &testCluster{
		t:         t,
		transport: transport,
		groups:    map[proto.RangeID][]int{},
	}

	for i := 0; i < size; i++ {
		ticker := newManualTicker()
		storage := &BlockableStorage{storage: NewMemoryStorage()}
		config := &Config{
			Transport:              transport,
			Storage:                storage,
			Ticker:                 ticker,
			ElectionTimeoutTicks:   2,
			HeartbeatIntervalTicks: 1,
			TickInterval:           time.Hour, // not in use
		}
		mr, err := NewMultiRaft(proto.RaftNodeID(i+1), config, stopper)
		if err != nil {
			t.Fatal(err)
		}
		state := newState(mr)
		demux := newEventDemux(state.Events)
		demux.start(stopper)
		cluster.nodes = append(cluster.nodes, state)
		cluster.tickers = append(cluster.tickers, ticker)
		cluster.events = append(cluster.events, demux)
		cluster.storages = append(cluster.storages, storage)
	}
	cluster.start()
	return cluster
}
开发者ID:kangxinrong,项目名称:cockroach,代码行数:37,代码来源:multiraft_test.go


注:本文中的github.com/cockroachdb/cockroach/util/stop.Stopper.AddCloser方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。