Golang roachpb.RangeDescriptor类代码示例

// TransferRangeLease transfers the lease for a range from whoever has it to
// a particular store. That store must already have a replica of the range. If
// that replica already has the (active) lease, this method is a no-op.
func (tc *TestCluster) TransferRangeLease(
	rangeDesc *roachpb.RangeDescriptor, dest ReplicationTarget,
) error {
	destReplicaDesc, ok := rangeDesc.GetReplicaDescriptor(dest.StoreID)
	if !ok {
		log.Fatalf("Couldn't find store %d in range %+v", dest.StoreID, rangeDesc)
	}

	leaseHolderDesc, err := tc.FindRangeLeaseHolder(rangeDesc,
		&ReplicationTarget{
			NodeID:  destReplicaDesc.NodeID,
			StoreID: destReplicaDesc.StoreID,
		})
	if err != nil {
		return err
	}
	if leaseHolderDesc.StoreID == dest.StoreID {
		// The intended replica already has the lease. Nothing to do.
		return nil
	}
	oldStore, err := tc.findMemberStore(leaseHolderDesc.StoreID)
	if err != nil {
		return err
	}
	oldReplica, err := oldStore.GetReplica(rangeDesc.RangeID)
	if err != nil {
		return err
	}
	// Ask the lease holder to transfer the lease.
	if err := oldReplica.AdminTransferLease(destReplicaDesc); err != nil {
		return err
	}
	return nil
}

// TestSendRPCRetry verifies that sendRPC failed on first address but succeed on
// second address, the second reply should be successfully returned back.
func TestSendRPCRetry(t *testing.T) {
	defer leaktest.AfterTest(t)
	g, s := makeTestGossip(t)
	defer s()
	g.SetNodeID(1)
	if err := g.SetNodeDescriptor(&roachpb.NodeDescriptor{NodeID: 1}); err != nil {
		t.Fatal(err)
	}
	// Fill RangeDescriptor with 2 replicas
	var descriptor = roachpb.RangeDescriptor{
		RangeID:  1,
		StartKey: roachpb.RKey("a"),
		EndKey:   roachpb.RKey("z"),
	}
	for i := 1; i <= 2; i++ {
		addr := util.MakeUnresolvedAddr("tcp", fmt.Sprintf("node%d", i))
		nd := &roachpb.NodeDescriptor{
			NodeID:  roachpb.NodeID(i),
			Address: util.MakeUnresolvedAddr(addr.Network(), addr.String()),
		}
		if err := g.AddInfoProto(gossip.MakeNodeIDKey(roachpb.NodeID(i)), nd, time.Hour); err != nil {
			t.Fatal(err)
		}

		descriptor.Replicas = append(descriptor.Replicas, roachpb.ReplicaDescriptor{
			NodeID:  roachpb.NodeID(i),
			StoreID: roachpb.StoreID(i),
		})
	}
	// Define our rpcSend stub which returns success on the second address.
	var testFn rpcSendFn = func(_ rpc.Options, method string, addrs []net.Addr, getArgs func(addr net.Addr) proto.Message, getReply func() proto.Message, _ *rpc.Context) ([]proto.Message, error) {
		if method == "Node.Batch" {
			// reply from first address failed
			_ = getReply()
			// reply from second address succeed
			batchReply := getReply().(*roachpb.BatchResponse)
			reply := &roachpb.ScanResponse{}
			batchReply.Add(reply)
			reply.Rows = append([]roachpb.KeyValue{}, roachpb.KeyValue{Key: roachpb.Key("b"), Value: roachpb.Value{}})
			return []proto.Message{batchReply}, nil
		}
		return nil, util.Errorf("unexpected method %v", method)
	}
	ctx := &DistSenderContext{
		RPCSend: testFn,
		RangeDescriptorDB: mockRangeDescriptorDB(func(_ roachpb.RKey, _, _ bool) ([]roachpb.RangeDescriptor, *roachpb.Error) {
			return []roachpb.RangeDescriptor{descriptor}, nil
		}),
	}
	ds := NewDistSender(ctx, g)
	scan := roachpb.NewScan(roachpb.Key("a"), roachpb.Key("d"), 1)
	sr, err := client.SendWrapped(ds, nil, scan)
	if err != nil {
		t.Fatal(err)
	}
	if l := len(sr.(*roachpb.ScanResponse).Rows); l != 1 {
		t.Fatalf("expected 1 row; got %d", l)
	}
}

// intersect returns the intersection of the current span and the
// descriptor's range.
func (rs rSpan) intersect(desc *roachpb.RangeDescriptor) rSpan {
	key := rs.key
	if !desc.ContainsKey(key) {
		key = desc.StartKey
	}
	endKey := rs.endKey
	if !desc.ContainsKeyRange(desc.StartKey, endKey) || endKey == nil {
		endKey = desc.EndKey
	}
	return rSpan{key, endKey}
}

// TestSendRPCRetry verifies that sendRPC failed on first address but succeed on
// second address, the second reply should be successfully returned back.
func TestSendRPCRetry(t *testing.T) {
	defer leaktest.AfterTest(t)
	g, s := makeTestGossip(t)
	defer s()
	g.SetNodeID(1)
	if err := g.SetNodeDescriptor(&roachpb.NodeDescriptor{NodeID: 1}); err != nil {
		t.Fatal(err)
	}
	// Fill RangeDescriptor with 2 replicas
	var descriptor = roachpb.RangeDescriptor{
		RangeID:  1,
		StartKey: roachpb.RKey("a"),
		EndKey:   roachpb.RKey("z"),
	}
	for i := 1; i <= 2; i++ {
		addr := util.MakeUnresolvedAddr("tcp", fmt.Sprintf("node%d", i))
		nd := &roachpb.NodeDescriptor{
			NodeID:  roachpb.NodeID(i),
			Address: util.MakeUnresolvedAddr(addr.Network(), addr.String()),
		}
		if err := g.AddInfoProto(gossip.MakeNodeIDKey(roachpb.NodeID(i)), nd, time.Hour); err != nil {
			t.Fatal(err)
		}

		descriptor.Replicas = append(descriptor.Replicas, roachpb.ReplicaDescriptor{
			NodeID:  roachpb.NodeID(i),
			StoreID: roachpb.StoreID(i),
		})
	}
	var testFn rpcSendFn = func(_ SendOptions, _ ReplicaSlice,
		args roachpb.BatchRequest, _ *rpc.Context) (proto.Message, error) {
		batchReply := &roachpb.BatchResponse{}
		reply := &roachpb.ScanResponse{}
		batchReply.Add(reply)
		reply.Rows = append([]roachpb.KeyValue{}, roachpb.KeyValue{Key: roachpb.Key("b"), Value: roachpb.Value{}})
		return batchReply, nil
	}
	ctx := &DistSenderContext{
		RPCSend: testFn,
		RangeDescriptorDB: mockRangeDescriptorDB(func(_ roachpb.RKey, _, _ bool) ([]roachpb.RangeDescriptor, *roachpb.Error) {
			return []roachpb.RangeDescriptor{descriptor}, nil
		}),
	}
	ds := NewDistSender(ctx, g)
	scan := roachpb.NewScan(roachpb.Key("a"), roachpb.Key("d"), 1)
	sr, err := client.SendWrapped(ds, nil, scan)
	if err != nil {
		t.Fatal(err)
	}
	if l := len(sr.(*roachpb.ScanResponse).Rows); l != 1 {
		t.Fatalf("expected 1 row; got %d", l)
	}
}

// FindRangeLeaseHolder returns the current lease holder for the given range. If
// there is no lease at the time of the call, a replica is gets one as a
// side-effect of calling this; if hint is not nil, that replica will be the
// one.
//
// One of the Stores in the cluster is used as a Sender to send a dummy read
// command, which will either result in success (if a replica on that Node has
// the lease), in a NotLeaseHolderError pointing to the current lease holder (if
// there is an active lease), or in the replica on that store acquiring the
// lease (if there isn't an active lease).
// If an active lease existed for the range, it's extended as a side-effect.
func (tc *TestCluster) FindRangeLeaseHolder(
	rangeDesc *roachpb.RangeDescriptor,
	hint *ReplicationTarget,
) (ReplicationTarget, error) {
	var hintReplicaDesc roachpb.ReplicaDescriptor
	if hint != nil {
		var ok bool
		if hintReplicaDesc, ok = rangeDesc.GetReplicaDescriptor(hint.StoreID); !ok {
			return ReplicationTarget{}, errors.Errorf(
				"bad hint; store doesn't have a replica of the range")
		}
	} else {
		hint = &ReplicationTarget{
			NodeID:  rangeDesc.Replicas[0].NodeID,
			StoreID: rangeDesc.Replicas[0].StoreID}
		hintReplicaDesc = rangeDesc.Replicas[0]
	}
	// TODO(andrei): Using a dummy GetRequest for the purpose of figuring out the
	// lease holder is a hack. Instead, we should have a dedicate admin command.
	getReq := roachpb.GetRequest{
		Span: roachpb.Span{
			Key: rangeDesc.StartKey.AsRawKey(),
		},
	}

	store, err := tc.findMemberStore(hint.StoreID)
	if err != nil {
		return ReplicationTarget{}, err
	}
	_, pErr := client.SendWrappedWith(
		store, nil,
		roachpb.Header{RangeID: rangeDesc.RangeID, Replica: hintReplicaDesc},
		&getReq)
	if pErr != nil {
		if nle, ok := pErr.GetDetail().(*roachpb.NotLeaseHolderError); ok {
			if nle.LeaseHolder == nil {
				return ReplicationTarget{}, errors.Errorf(
					"unexpected NotLeaseHolderError with lease holder unknown")
			}
			return ReplicationTarget{
				NodeID: nle.LeaseHolder.NodeID, StoreID: nle.LeaseHolder.StoreID}, nil
		}
		return ReplicationTarget{}, pErr.GoError()
	}
	// The replica we sent the request to either was already or just became
	// the lease holder.
	return *hint, nil
}

//.........这里部分代码省略.........
		// Put with matching attributes but no leader.
		// Should move the two nodes matching the attributes to the front and
		// go stable.
		{
			args:  &roachpb.PutRequest{},
			attrs: append(nodeAttrs[5], "irrelevant"),
			// Compare only the first two resulting addresses.
			order:      rpc.OrderStable,
			expReplica: []int32{5, 4, 0, 0, 0},
		},
		// Put with matching attributes that finds the leader (node 3).
		// Should address the leader and the two nodes matching the attributes
		// (the last and second to last) in that order.
		{
			args:  &roachpb.PutRequest{},
			attrs: append(nodeAttrs[5], "irrelevant"),
			// Compare only the first resulting addresses as we have a leader
			// and that means we're only trying to send there.
			order:      rpc.OrderStable,
			expReplica: []int32{2, 5, 4, 0, 0},
			leader:     2,
		},
		// Inconsistent Get without matching attributes but leader (node 3). Should just
		// go random as the leader does not matter.
		{
			args:       &roachpb.GetRequest{},
			attrs:      []string{},
			order:      rpc.OrderRandom,
			expReplica: []int32{1, 2, 3, 4, 5},
			leader:     2,
		},
	}

	descriptor := roachpb.RangeDescriptor{
		StartKey: roachpb.RKeyMin,
		EndKey:   roachpb.RKeyMax,
		RangeID:  rangeID,
		Replicas: nil,
	}

	// Stub to be changed in each test case.
	var verifyCall func(rpc.Options, []net.Addr) error

	var testFn rpcSendFn = func(opts rpc.Options, method string,
		addrs []net.Addr, getArgs func(addr net.Addr) proto.Message,
		getReply func() proto.Message, _ *rpc.Context) ([]proto.Message, error) {
		if err := verifyCall(opts, addrs); err != nil {
			return nil, err
		}
		return []proto.Message{getArgs(addrs[0]).(*roachpb.BatchRequest).CreateReply()}, nil
	}

	ctx := &DistSenderContext{
		RPCSend: testFn,
		RangeDescriptorDB: mockRangeDescriptorDB(func(roachpb.RKey, bool, bool) ([]roachpb.RangeDescriptor, *roachpb.Error) {
			return []roachpb.RangeDescriptor{descriptor}, nil
		}),
	}

	ds := NewDistSender(ctx, g)

	for n, tc := range testCases {
		verifyCall = makeVerifier(tc.order, tc.expReplica)
		descriptor.Replicas = nil // could do this once above, but more convenient here
		for i := int32(1); i <= 5; i++ {
			addr := util.MakeUnresolvedAddr("tcp", fmt.Sprintf("node%d", i))

// sendChunk is in charge of sending an "admissible" piece of batch, i.e. one
// which doesn't need to be subdivided further before going to a range (so no
// mixing of forward and reverse scans, etc). The parameters and return values
// correspond to client.Sender with the exception of the returned boolean,
// which is true when indicating that the caller should retry but needs to send
// EndTransaction in a separate request.
func (ds *DistSender) sendChunk(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error, bool) {
	isReverse := ba.IsReverse()

	trace := tracer.FromCtx(ctx)

	// The minimal key range encompassing all requests contained within.
	// Local addressing has already been resolved.
	// TODO(tschottdorf): consider rudimentary validation of the batch here
	// (for example, non-range requests with EndKey, or empty key ranges).
	rs := keys.Range(ba)
	var br *roachpb.BatchResponse
	// Send the request to one range per iteration.
	for {
		considerIntents := false
		var curReply *roachpb.BatchResponse
		var desc *roachpb.RangeDescriptor
		var needAnother bool
		var pErr *roachpb.Error
		for r := retry.Start(ds.rpcRetryOptions); r.Next(); {
			// Get range descriptor (or, when spanning range, descriptors). Our
			// error handling below may clear them on certain errors, so we
			// refresh (likely from the cache) on every retry.
			descDone := trace.Epoch("meta descriptor lookup")
			var evictDesc func()
			desc, needAnother, evictDesc, pErr = ds.getDescriptors(rs, considerIntents, isReverse)
			descDone()

			// getDescriptors may fail retryably if the first range isn't
			// available via Gossip.
			if pErr != nil {
				if pErr.Retryable {
					if log.V(1) {
						log.Warning(pErr)
					}
					continue
				}
				break
			}

			if needAnother && br == nil {
				// TODO(tschottdorf): we should have a mechanism for discovering
				// range merges (descriptor staleness will mostly go unnoticed),
				// or we'll be turning single-range queries into multi-range
				// queries for no good reason.

				// If there's no transaction and op spans ranges, possibly
				// re-run as part of a transaction for consistency. The
				// case where we don't need to re-run is if the read
				// consistency is not required.
				if ba.Txn == nil && ba.IsPossibleTransaction() &&
					ba.ReadConsistency != roachpb.INCONSISTENT {
					return nil, roachpb.NewError(&roachpb.OpRequiresTxnError{}), false
				}
				// If the request is more than but ends with EndTransaction, we
				// want the caller to come again with the EndTransaction in an
				// extra call.
				if l := len(ba.Requests) - 1; l > 0 && ba.Requests[l].GetInner().Method() == roachpb.EndTransaction {
					return nil, roachpb.NewError(errors.New("cannot send 1PC txn to multiple ranges")), true /* shouldSplitET */
				}
			}

			// It's possible that the returned descriptor misses parts of the
			// keys it's supposed to scan after it's truncated to match the
			// descriptor. Example revscan [a,g), first desc lookup for "g"
			// returns descriptor [c,d) -> [d,g) is never scanned.
			// We evict and retry in such a case.
			if (isReverse && !desc.ContainsKeyRange(desc.StartKey, rs.EndKey)) || (!isReverse && !desc.ContainsKeyRange(rs.Key, desc.EndKey)) {
				evictDesc()
				continue
			}

			curReply, pErr = func() (*roachpb.BatchResponse, *roachpb.Error) {
				// Truncate the request to our current key range.
				intersected, iErr := rs.Intersect(desc)
				if iErr != nil {
					return nil, roachpb.NewError(iErr)
				}
				truncBA, numActive, trErr := truncate(ba, intersected)
				if numActive == 0 && trErr == nil {
					// This shouldn't happen in the wild, but some tests
					// exercise it.
					return nil, roachpb.NewErrorf("truncation resulted in empty batch on [%s,%s): %s",
						rs.Key, rs.EndKey, ba)
				}
				if trErr != nil {
					return nil, roachpb.NewError(trErr)
				}

				return ds.sendSingleRange(trace, truncBA, desc)
			}()
			// If sending succeeded, break this loop.
			if pErr == nil {
				break
			}
//.........这里部分代码省略.........

// sendChunk is in charge of sending an "admissible" piece of batch, i.e. one
// which doesn't need to be subdivided further before going to a range (so no
// mixing of forward and reverse scans, etc). The parameters and return values
// correspond to client.Sender with the exception of the returned boolean,
// which is true when indicating that the caller should retry but needs to send
// EndTransaction in a separate request.
func (ds *DistSender) sendChunk(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error, bool) {
	isReverse := ba.IsReverse()

	// TODO(radu): when contexts are properly plumbed, we should be able to get
	// the tracer from ctx, not from the DistSender.
	ctx, cleanup := tracing.EnsureContext(ctx, tracing.TracerFromCtx(ds.Ctx))
	defer cleanup()

	// The minimal key range encompassing all requests contained within.
	// Local addressing has already been resolved.
	// TODO(tschottdorf): consider rudimentary validation of the batch here
	// (for example, non-range requests with EndKey, or empty key ranges).
	rs, err := keys.Range(ba)
	if err != nil {
		return nil, roachpb.NewError(err), false
	}
	var br *roachpb.BatchResponse

	// Send the request to one range per iteration.
	for {
		// Increase the sequence counter only once before sending RPCs to
		// the ranges involved in this chunk of the batch (as opposed to for
		// each RPC individually). On RPC errors, there's no guarantee that
		// the request hasn't made its way to the target regardless of the
		// error; we'd like the second execution to be caught by the sequence
		// cache if that happens. There is a small chance that that we address
		// a range twice in this chunk (stale/suboptimal descriptors due to
		// splits/merges) which leads to a transaction retry.
		// TODO(tschottdorf): it's possible that if we don't evict from the
		//   cache we could be in for a busy loop.
		ba.SetNewRequest()

		var curReply *roachpb.BatchResponse
		var desc *roachpb.RangeDescriptor
		var evictToken *evictionToken
		var needAnother bool
		var pErr *roachpb.Error
		var finished bool
		var numAttempts int
		for r := retry.StartWithCtx(ctx, ds.rpcRetryOptions); r.Next(); {
			numAttempts++
			{
				const magicLogCurAttempt = 20

				var seq int32
				if ba.Txn != nil {
					seq = ba.Txn.Sequence
				}

				if numAttempts%magicLogCurAttempt == 0 || seq%magicLogCurAttempt == 0 {
					// Log a message if a request appears to get stuck for a long
					// time or, potentially, forever. See #8975.
					// The local counter captures this loop here; the Sequence number
					// should capture anything higher up (as it needs to be
					// incremented every time this method is called).
					log.Warningf(
						ctx,
						"%d retries for an RPC at sequence %d, last error was: %s, remaining key ranges %s: %s",
						numAttempts, seq, pErr, rs, ba,
					)
				}
			}
			// Get range descriptor (or, when spanning range, descriptors). Our
			// error handling below may clear them on certain errors, so we
			// refresh (likely from the cache) on every retry.
			log.Trace(ctx, "meta descriptor lookup")
			var err error
			desc, needAnother, evictToken, err = ds.getDescriptors(ctx, rs, evictToken, isReverse)

			// getDescriptors may fail retryably if, for example, the first
			// range isn't available via Gossip. Assume that all errors at
			// this level are retryable. Non-retryable errors would be for
			// things like malformed requests which we should have checked
			// for before reaching this point.
			if err != nil {
				log.Trace(ctx, "range descriptor lookup failed: "+err.Error())
				if log.V(1) {
					log.Warning(ctx, err)
				}
				pErr = roachpb.NewError(err)
				continue
			}

			if needAnother && br == nil {
				// TODO(tschottdorf): we should have a mechanism for discovering
				// range merges (descriptor staleness will mostly go unnoticed),
				// or we'll be turning single-range queries into multi-range
				// queries for no good reason.

				// If there's no transaction and op spans ranges, possibly
				// re-run as part of a transaction for consistency. The
				// case where we don't need to re-run is if the read
				// consistency is not required.
				if ba.Txn == nil && ba.IsPossibleTransaction() &&
//.........这里部分代码省略.........

func testRangeCacheHandleDoubleSplit(t *testing.T, useReverseScan bool) {
	db := initTestDescriptorDB(t)
	db.disablePrefetch = true

	// A request initially looks up the range descriptor ["a"-"b").
	doLookup(t, db.cache, "aa")
	db.assertLookupCountEq(t, 2, "aa")

	// A split breaks up the range into ["a"-"an"), ["an"-"at"), ["at"-"b").
	db.splitRange(t, roachpb.RKey("an"))
	db.splitRange(t, roachpb.RKey("at"))

	// A request is sent to the stale descriptor on the right half
	// such that a RangeKeyMismatchError is returned.
	_, evictToken := doLookup(t, db.cache, "az")
	// mismatchErrRange mocks out a RangeKeyMismatchError.Range response.
	ranges, _, pErr := db.getDescriptors(roachpb.RKey("aa"), false, false)
	if pErr != nil {
		t.Fatal(pErr)
	}
	mismatchErrRange := ranges[0]
	// The stale descriptor is evicted, the new descriptor from the error is
	// replaced, and a new lookup is initialized.
	if err := evictToken.EvictAndReplace(context.Background(), mismatchErrRange); err != nil {
		t.Fatal(err)
	}

	// Requests to all parts of the split are sent:

	// [reverse case]
	// - "aa" and "an" will hit the cache
	// - all others will join a coalesced request to "az"
	//   + will lookup the meta2 desc
	//   + will lookup the ["at"-"b") desc
	// - "az" will get the right range back
	// - "at" will make a second lookup
	//   + will lookup the ["an"-"at") desc
	//
	// [non-reverse case]
	// - "aa" will hit the cache
	// - all others will join a coalesced request to "an"
	//   + will lookup the meta2 desc
	//   + will lookup the ["an"-"at") desc
	// - "an" and "ao" will get the right range back
	// - "at" and "az" will make a second lookup
	//   + will lookup the ["at"-"b") desc
	var wg, waitJoin sync.WaitGroup
	db.pauseRangeLookups()
	numRetries := int64(0)
	for _, k := range []string{"aa", "an", "ao", "at", "az"} {
		wg.Add(1)
		waitJoin.Add(1)
		go func(key roachpb.RKey) {
			reqEvictToken := evictToken
			waitJoinCopied := &waitJoin
			var desc *roachpb.RangeDescriptor
			for {
				// Each request goes to a different key.
				var err error
				if desc, reqEvictToken, err = db.cache.lookupRangeDescriptorInternal(
					context.Background(), key, reqEvictToken, false, /* considerIntents */
					useReverseScan, waitJoinCopied); err != nil {
					waitJoinCopied = nil
					atomic.AddInt64(&numRetries, 1)
					continue
				}
				break
			}
			if useReverseScan {
				if !desc.ContainsExclusiveEndKey(key) {
					t.Errorf("desc %s does not contain exclusive end key %s", desc, key)
				}
			} else {
				if !desc.ContainsKey(key) {
					t.Errorf("desc %s does not contain key %s", desc, key)
				}
			}

			wg.Done()
		}(roachpb.RKey(k))
	}
	// Wait until all lookup requests hit the cache or join into a coalesced request.
	waitJoin.Wait()
	db.resumeRangeLookups()

	wg.Wait()
	db.assertLookupCountEq(t, 3, "an and az")
	if numRetries == 0 {
		t.Error("expected retry on desc lookup")
	}

	// All three descriptors are now correctly cached.
	doLookup(t, db.cache, "aa")
	db.assertLookupCountEq(t, 0, "aa")
	doLookup(t, db.cache, "ao")
	db.assertLookupCountEq(t, 0, "ao")
	doLookup(t, db.cache, "az")
	db.assertLookupCountEq(t, 0, "az")
}

// truncate restricts all contained requests to the given key range.
// Even on error, the returned closure must be executed; it undoes any
// truncations performed.
// First, the boundaries of the truncation are obtained: This is the
// intersection between [from,to) and the descriptor's range.
// Secondly, all requests contained in the batch are "truncated" to
// the resulting range, inserting NoopRequest appropriately to
// replace requests which are left without a key range to operate on.
// The number of non-noop requests after truncation is returned along
// with a closure which must be executed to undo the truncation, even
// in case of an error.
// TODO(tschottdorf): Consider returning a new BatchRequest, which has more
// overhead in the common case of a batch which never needs truncation but is
// less magical.
func truncate(br *roachpb.BatchRequest, desc *roachpb.RangeDescriptor, from, to roachpb.RKey) (func(), int, error) {
	if !desc.ContainsKey(from) {
		from = desc.StartKey
	}
	if !desc.ContainsKeyRange(desc.StartKey, to) || to == nil {
		to = desc.EndKey
	}
	truncateOne := func(args roachpb.Request) (bool, []func(), error) {
		if _, ok := args.(*roachpb.NoopRequest); ok {
			return true, nil, nil
		}
		header := args.Header()
		if !roachpb.IsRange(args) {
			// This is a point request.
			if len(header.EndKey) > 0 {
				return false, nil, util.Errorf("%T is not a range command, but EndKey is set", args)
			}
			if !desc.ContainsKey(keys.Addr(header.Key)) {
				return true, nil, nil
			}
			return false, nil, nil
		}
		// We're dealing with a range-spanning request.
		var undo []func()
		keyAddr, endKeyAddr := keys.Addr(header.Key), keys.Addr(header.EndKey)
		if l, r := !keyAddr.Equal(header.Key), !endKeyAddr.Equal(header.EndKey); l || r {
			if !desc.ContainsKeyRange(keyAddr, endKeyAddr) {
				return false, nil, util.Errorf("local key range must not span ranges")
			}
			if !l || !r {
				return false, nil, util.Errorf("local key mixed with global key in range")
			}
		}
		// Below, {end,}keyAddr equals header.{End,}Key, so nothing is local.
		if keyAddr.Less(from) {
			{
				origKey := header.Key
				undo = append(undo, func() { header.Key = origKey })
			}
			header.Key = from.AsRawKey() // "from" can't be local
			keyAddr = from
		}
		if !endKeyAddr.Less(to) {
			{
				origEndKey := header.EndKey
				undo = append(undo, func() { header.EndKey = origEndKey })
			}
			header.EndKey = to.AsRawKey() // "to" can't be local
			endKeyAddr = to
		}
		// Check whether the truncation has left any keys in the range. If not,
		// we need to cut it out of the request.
		return !keyAddr.Less(endKeyAddr), undo, nil
	}

	var fns []func()
	gUndo := func() {
		for _, f := range fns {
			f()
		}
	}

	var numNoop int
	for pos, arg := range br.Requests {
		omit, undo, err := truncateOne(arg.GetInner())
		if omit {
			numNoop++
			nReq := &roachpb.RequestUnion{}
			if !nReq.SetValue(&roachpb.NoopRequest{}) {
				panic("RequestUnion excludes NoopRequest")
			}
			oReq := br.Requests[pos]
			br.Requests[pos] = *nReq
			posCpy := pos // for closure
			undo = append(undo, func() {
				br.Requests[posCpy] = oReq
			})
		}
		fns = append(fns, undo...)
		if err != nil {
			return gUndo, 0, err
		}
	}
	return gUndo, len(br.Requests) - numNoop, nil
}

// sendChunk is in charge of sending an "admissible" piece of batch, i.e. one
// which doesn't need to be subdivided further before going to a range (so no
// mixing of forward and reverse scans, etc). The parameters and return values
// correspond to client.Sender with the exception of the returned boolean,
// which is true when indicating that the caller should retry but needs to send
// EndTransaction in a separate request.
func (ds *DistSender) sendChunk(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error, bool) {
	isReverse := ba.IsReverse()

	ctx, cleanup := tracing.EnsureContext(ctx, ds.Tracer)
	defer cleanup()

	// The minimal key range encompassing all requests contained within.
	// Local addressing has already been resolved.
	// TODO(tschottdorf): consider rudimentary validation of the batch here
	// (for example, non-range requests with EndKey, or empty key ranges).
	rs, err := keys.Range(ba)
	if err != nil {
		return nil, roachpb.NewError(err), false
	}
	var br *roachpb.BatchResponse

	// Send the request to one range per iteration.
	for {
		// Increase the sequence counter only once before sending RPCs to
		// the ranges involved in this chunk of the batch (as opposed to for
		// each RPC individually). On RPC errors, there's no guarantee that
		// the request hasn't made its way to the target regardless of the
		// error; we'd like the second execution to be caught by the sequence
		// cache if that happens. There is a small chance that that we address
		// a range twice in this chunk (stale/suboptimal descriptors due to
		// splits/merges) which leads to a transaction retry.
		// TODO(tschottdorf): it's possible that if we don't evict from the
		//   cache we could be in for a busy loop.
		ba.SetNewRequest()

		var curReply *roachpb.BatchResponse
		var desc *roachpb.RangeDescriptor
		var evictToken evictionToken
		var needAnother bool
		var pErr *roachpb.Error
		var finished bool
		for r := retry.Start(ds.rpcRetryOptions); r.Next(); {
			// Get range descriptor (or, when spanning range, descriptors). Our
			// error handling below may clear them on certain errors, so we
			// refresh (likely from the cache) on every retry.
			log.Trace(ctx, "meta descriptor lookup")
			desc, needAnother, evictToken, pErr = ds.getDescriptors(rs, evictToken, isReverse)

			// getDescriptors may fail retryably if the first range isn't
			// available via Gossip.
			if pErr != nil {
				log.Trace(ctx, "range descriptor lookup failed: "+pErr.String())
				if pErr.Retryable {
					if log.V(1) {
						log.Warning(pErr)
					}
					continue
				}
				break
			} else {
				log.Trace(ctx, "looked up range descriptor")
			}

			if needAnother && br == nil {
				// TODO(tschottdorf): we should have a mechanism for discovering
				// range merges (descriptor staleness will mostly go unnoticed),
				// or we'll be turning single-range queries into multi-range
				// queries for no good reason.

				// If there's no transaction and op spans ranges, possibly
				// re-run as part of a transaction for consistency. The
				// case where we don't need to re-run is if the read
				// consistency is not required.
				if ba.Txn == nil && ba.IsPossibleTransaction() &&
					ba.ReadConsistency != roachpb.INCONSISTENT {
					return nil, roachpb.NewError(&roachpb.OpRequiresTxnError{}), false
				}
				// If the request is more than but ends with EndTransaction, we
				// want the caller to come again with the EndTransaction in an
				// extra call.
				if l := len(ba.Requests) - 1; l > 0 && ba.Requests[l].GetInner().Method() == roachpb.EndTransaction {
					return nil, roachpb.NewError(errors.New("cannot send 1PC txn to multiple ranges")), true /* shouldSplitET */
				}
			}

			// It's possible that the returned descriptor misses parts of the
			// keys it's supposed to scan after it's truncated to match the
			// descriptor. Example revscan [a,g), first desc lookup for "g"
			// returns descriptor [c,d) -> [d,g) is never scanned.
			// We evict and retry in such a case.
			includesFrontOfCurSpan := func(rd *roachpb.RangeDescriptor) bool {
				if isReverse {
					// This approach is needed because rs.EndKey is exclusive.
					return desc.ContainsKeyRange(desc.StartKey, rs.EndKey)
				}
				return desc.ContainsKey(rs.Key)
			}
			if !includesFrontOfCurSpan(desc) {
				if err := evictToken.Evict(); err != nil {
//.........这里部分代码省略.........

// truncate restricts all contained requests to the given key range.
// Even on error, the returned closure must be executed; it undoes any
// truncations performed.
// First, the boundaries of the truncation are obtained: This is the
// intersection between [from,to) and the descriptor's range.
// Secondly, all requests contained in the batch are "truncated" to
// the resulting range, inserting NoopRequest appropriately to
// replace requests which are left without a key range to operate on.
// The number of non-noop requests after truncation is returned along
// with a closure which must be executed to undo the truncation, even
// in case of an error.
// TODO(tschottdorf): Consider returning a new BatchRequest, which has more
// overhead in the common case of a batch which never needs truncation but is
// less magical.
func truncate(br *roachpb.BatchRequest, desc *roachpb.RangeDescriptor, from, to roachpb.Key) (func(), int, error) {
	if !desc.ContainsKey(from) {
		from = desc.StartKey
	}
	if !desc.ContainsKeyRange(desc.StartKey, to) || to == nil {
		to = desc.EndKey
	}
	truncateOne := func(args roachpb.Request) (bool, []func(), error) {
		if _, ok := args.(*roachpb.NoopRequest); ok {
			return true, nil, nil
		}
		header := args.Header()
		if !roachpb.IsRange(args) {
			if len(header.EndKey) > 0 {
				return false, nil, util.Errorf("%T is not a range command, but EndKey is set", args)
			}
			if !desc.ContainsKey(keys.KeyAddress(header.Key)) {
				return true, nil, nil
			}
			return false, nil, nil
		}
		var undo []func()
		key, endKey := header.Key, header.EndKey
		keyAddr, endKeyAddr := keys.KeyAddress(key), keys.KeyAddress(endKey)
		if keyAddr.Less(from) {
			undo = append(undo, func() { header.Key = key })
			header.Key = from
			keyAddr = from
		}
		if !endKeyAddr.Less(to) {
			undo = append(undo, func() { header.EndKey = endKey })
			header.EndKey = to
			endKeyAddr = to
		}
		// Check whether the truncation has left any keys in the range. If not,
		// we need to cut it out of the request.
		return !keyAddr.Less(endKeyAddr), undo, nil
	}

	var fns []func()
	gUndo := func() {
		for _, f := range fns {
			f()
		}
	}

	var numNoop int
	for pos, arg := range br.Requests {
		omit, undo, err := truncateOne(arg.GetInner())
		if omit {
			numNoop++
			nReq := &roachpb.RequestUnion{}
			if !nReq.SetValue(&roachpb.NoopRequest{}) {
				panic("RequestUnion excludes NoopRequest")
			}
			oReq := br.Requests[pos]
			br.Requests[pos] = *nReq
			posCpy := pos // for closure
			undo = append(undo, func() {
				br.Requests[posCpy] = oReq
			})
		}
		fns = append(fns, undo...)
		if err != nil {
			return gUndo, 0, err
		}
	}
	return gUndo, len(br.Requests) - numNoop, nil
}