Golang BatchRequest.UpdateTxn方法代码示例

// divideAndSendBatchToRanges sends the supplied batch to all of the
// ranges which comprise the span specified by rs. The batch request
// is trimmed against each range which is part of the span and sent
// either serially or in parallel, if possible. isFirst indicates
// whether this is the first time this method has been called on the
// batch. It's specified false where this method is invoked recursively.
func (ds *DistSender) divideAndSendBatchToRanges(
	ctx context.Context, ba roachpb.BatchRequest, rs roachpb.RSpan, isFirst bool,
) (br *roachpb.BatchResponse, pErr *roachpb.Error) {
	// This function builds a channel of responses for each range
	// implicated in the span (rs) and combines them into a single
	// BatchResponse when finished.
	var responseChs []chan response
	defer func() {
		for _, responseCh := range responseChs {
			resp := <-responseCh
			if resp.pErr != nil {
				if pErr == nil {
					pErr = resp.pErr
				}
				continue
			}
			if br == nil {
				// First response from a Range.
				br = resp.reply
			} else {
				// This was the second or later call in a cross-Range request.
				// Combine the new response with the existing one.
				if err := br.Combine(resp.reply); err != nil {
					pErr = roachpb.NewError(err)
					return
				}
				br.Txn.Update(resp.reply.Txn)
			}
		}

		// If we experienced an error, don't neglect to update the error's
		// attached transaction with any responses which were received.
		if pErr != nil {
			if br != nil {
				pErr.UpdateTxn(br.Txn)
			}
		}
	}()

	// Get initial seek key depending on direction of iteration.
	var seekKey roachpb.RKey
	isReverse := ba.IsReverse()
	if isReverse {
		seekKey = rs.EndKey
	} else {
		seekKey = rs.Key
	}
	// Send the request to one range per iteration.
	ri := NewRangeIterator(ds, isReverse)
	for ri.Seek(ctx, seekKey); ri.Valid(); ri.Seek(ctx, seekKey) {
		// Increase the sequence counter only once before sending RPCs to
		// the ranges involved in this chunk of the batch (as opposed to
		// for each RPC individually). On RPC errors, there's no guarantee
		// that the request hasn't made its way to the target regardless
		// of the error; we'd like the second execution to be caught by
		// the sequence cache if that happens. There is a small chance
		// that we address a range twice in this chunk (stale/suboptimal
		// descriptors due to splits/merges) which leads to a transaction
		// retry.
		//
		// TODO(tschottdorf): it's possible that if we don't evict from
		// the cache we could be in for a busy loop.
		ba.SetNewRequest()

		responseCh := make(chan response, 1)
		responseChs = append(responseChs, responseCh)

		if isFirst && ri.NeedAnother(rs) {
			// TODO(tschottdorf): we should have a mechanism for discovering
			// range merges (descriptor staleness will mostly go unnoticed),
			// or we'll be turning single-range queries into multi-range
			// queries for no good reason.
			//
			// If there's no transaction and op spans ranges, possibly
			// re-run as part of a transaction for consistency. The
			// case where we don't need to re-run is if the read
			// consistency is not required.
			if ba.Txn == nil && ba.IsPossibleTransaction() && ba.ReadConsistency != roachpb.INCONSISTENT {
				responseCh <- response{pErr: roachpb.NewError(&roachpb.OpRequiresTxnError{})}
				return
			}
			// If the request is more than but ends with EndTransaction, we
			// want the caller to come again with the EndTransaction in an
			// extra call.
			if l := len(ba.Requests) - 1; l > 0 && ba.Requests[l].GetInner().Method() == roachpb.EndTransaction {
				responseCh <- response{pErr: errNo1PCTxn}
				return
			}
		}

		// Determine next seek key, taking a potentially sparse batch into
		// consideration.
		var err error
		nextRS := rs
//.........这里部分代码省略.........

// Send implements the batch.Sender interface. It subdivides the Batch
// into batches admissible for sending (preventing certain illegal
// mixtures of requests), executes each individual part (which may
// span multiple ranges), and recombines the response.
//
// When the request spans ranges, it is split by range and a partial
// subset of the batch request is sent to affected ranges in parallel.
//
// The first write in a transaction may not arrive before writes to
// other ranges. This is relevant in the case of a BeginTransaction
// request. Intents written to other ranges before the transaction
// record is created will cause the transaction to abort early.
func (ds *DistSender) Send(
	ctx context.Context, ba roachpb.BatchRequest,
) (*roachpb.BatchResponse, *roachpb.Error) {
	tracing.AnnotateTrace()

	if pErr := ds.initAndVerifyBatch(ctx, &ba); pErr != nil {
		return nil, pErr
	}

	ctx = ds.AnnotateCtx(ctx)
	ctx, cleanup := tracing.EnsureContext(ctx, ds.AmbientContext.Tracer)
	defer cleanup()

	var rplChunks []*roachpb.BatchResponse
	parts := ba.Split(false /* don't split ET */)
	if len(parts) > 1 && ba.MaxSpanRequestKeys != 0 {
		// We already verified above that the batch contains only scan requests of the same type.
		// Such a batch should never need splitting.
		panic("batch with MaxSpanRequestKeys needs splitting")
	}
	for len(parts) > 0 {
		part := parts[0]
		ba.Requests = part
		// The minimal key range encompassing all requests contained within.
		// Local addressing has already been resolved.
		// TODO(tschottdorf): consider rudimentary validation of the batch here
		// (for example, non-range requests with EndKey, or empty key ranges).
		rs, err := keys.Range(ba)
		if err != nil {
			return nil, roachpb.NewError(err)
		}
		rpl, pErr := ds.divideAndSendBatchToRanges(ctx, ba, rs, true /* isFirst */)

		if pErr == errNo1PCTxn {
			// If we tried to send a single round-trip EndTransaction but
			// it looks like it's going to hit multiple ranges, split it
			// here and try again.
			if len(parts) != 1 {
				panic("EndTransaction not in last chunk of batch")
			}
			parts = ba.Split(true /* split ET */)
			if len(parts) != 2 {
				panic("split of final EndTransaction chunk resulted in != 2 parts")
			}
			continue
		}
		if pErr != nil {
			return nil, pErr
		}
		// Propagate transaction from last reply to next request. The final
		// update is taken and put into the response's main header.
		ba.UpdateTxn(rpl.Txn)
		rplChunks = append(rplChunks, rpl)
		parts = parts[1:]
	}

	reply := rplChunks[0]
	for _, rpl := range rplChunks[1:] {
		reply.Responses = append(reply.Responses, rpl.Responses...)
		reply.CollectedSpans = append(reply.CollectedSpans, rpl.CollectedSpans...)
	}
	reply.BatchResponse_Header = rplChunks[len(rplChunks)-1].BatchResponse_Header
	return reply, nil
}