本文整理汇总了Golang中github.com/cgrates/cgrates/config.CgrConfig函数的典型用法代码示例。如果您正苦于以下问题:Golang CgrConfig函数的具体用法?Golang CgrConfig怎么用?Golang CgrConfig使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了CgrConfig函数的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。
示例1: GetExtraFields
func (fsev FSEvent) GetExtraFields() map[string]string {
extraFields := make(map[string]string)
for _, fldRule := range config.CgrConfig().SmFsConfig.ExtraFields {
extraFields[fldRule.Id] = fsev.ParseEventValue(fldRule, config.CgrConfig().DefaultTimezone)
}
return extraFields
}
示例2: MissingParameter
func (kev KamEvent) MissingParameter() bool {
var nullTime time.Time
switch kev.GetName() {
case CGR_AUTH_REQUEST:
if setupTime, err := kev.GetSetupTime(utils.META_DEFAULT, config.CgrConfig().DefaultTimezone); err != nil || setupTime == nullTime {
return true
}
return len(kev.GetAccount(utils.META_DEFAULT)) == 0 ||
len(kev.GetDestination(utils.META_DEFAULT)) == 0 ||
len(kev[KAM_TR_INDEX]) == 0 || len(kev[KAM_TR_LABEL]) == 0
case CGR_LCR_REQUEST:
return len(kev.GetAccount(utils.META_DEFAULT)) == 0 ||
len(kev.GetDestination(utils.META_DEFAULT)) == 0 ||
len(kev[KAM_TR_INDEX]) == 0 || len(kev[KAM_TR_LABEL]) == 0
case CGR_CALL_START:
if aTime, err := kev.GetAnswerTime(utils.META_DEFAULT, config.CgrConfig().DefaultTimezone); err != nil || aTime == nullTime {
return true
}
return len(kev.GetUUID()) == 0 ||
len(kev.GetAccount(utils.META_DEFAULT)) == 0 ||
len(kev.GetDestination(utils.META_DEFAULT)) == 0 ||
len(kev[HASH_ENTRY]) == 0 || len(kev[HASH_ID]) == 0
case CGR_CALL_END:
return len(kev.GetUUID()) == 0 ||
len(kev.GetAccount(utils.META_DEFAULT)) == 0 ||
len(kev.GetDestination(utils.META_DEFAULT)) == 0 ||
len(kev[CGR_DURATION]) == 0
default:
return true
}
}
示例3: MissingParameter
func (osipsev *OsipsEvent) MissingParameter() bool {
var nilTime time.Time
if osipsev.GetName() == "E_ACC_EVENT" && osipsev.osipsEvent.AttrValues["method"] == "INVITE" {
return len(osipsev.GetUUID()) == 0 ||
len(osipsev.GetAccount(utils.META_DEFAULT)) == 0 ||
len(osipsev.GetDestination(utils.META_DEFAULT)) == 0 ||
len(osipsev.osipsEvent.AttrValues[OSIPS_DIALOG_ID]) == 0
} else if osipsev.GetName() == "E_ACC_EVENT" && osipsev.osipsEvent.AttrValues["method"] == "BYE" {
return len(osipsev.osipsEvent.AttrValues[OSIPS_DIALOG_ID]) == 0 ||
len(osipsev.osipsEvent.AttrValues[TIME]) == 0
} else if osipsev.GetName() == "E_ACC_EVENT" && osipsev.osipsEvent.AttrValues["method"] == "UPDATE" { // Updated event out of start/stop
// Data needed when stopping a prepaid loop or building a CDR with start/stop event
setupTime, err := osipsev.GetSetupTime(TIME, config.CgrConfig().DefaultTimezone)
if err != nil || setupTime.Equal(nilTime) {
return true
}
aTime, err := osipsev.GetAnswerTime(utils.META_DEFAULT, config.CgrConfig().DefaultTimezone)
if err != nil || aTime.Equal(nilTime) {
return true
}
endTime, err := osipsev.GetEndTime()
if err != nil || endTime.Equal(nilTime) {
return true
}
_, err = osipsev.GetDuration(utils.META_DEFAULT)
if err != nil {
return true
}
if osipsev.osipsEvent.AttrValues[OSIPS_DIALOG_ID] == "" {
return true
}
return false
}
return true
}
示例4: GetReqType
func (fsev FSEvent) GetReqType(fieldName string) string {
if strings.HasPrefix(fieldName, utils.STATIC_VALUE_PREFIX) { // Static value
return fieldName[len(utils.STATIC_VALUE_PREFIX):]
} else if fieldName == utils.META_DEFAULT {
return utils.FirstNonEmpty(fsev[REQTYPE], config.CgrConfig().DefaultReqType)
}
return utils.FirstNonEmpty(fsev[fieldName], fsev[REQTYPE], config.CgrConfig().DefaultReqType)
}
示例5: SureTaxProcessCdr
func SureTaxProcessCdr(cdr *CDR) error {
stCfg := config.CgrConfig().SureTaxCfg()
if stCfg == nil {
return errors.New("Invalid SureTax configuration")
}
if sureTaxClient == nil { // First time used, init the client here
tr := &http.Transport{
TLSClientConfig: &tls.Config{InsecureSkipVerify: config.CgrConfig().HttpSkipTlsVerify},
}
sureTaxClient = &http.Client{Transport: tr}
}
req, err := NewSureTaxRequest(cdr, stCfg)
if err != nil {
return err
}
jsnContent, err := json.Marshal(req)
if err != nil {
return err
}
resp, err := sureTaxClient.Post(stCfg.Url, "application/json", bytes.NewBuffer(jsnContent))
if err != nil {
return err
}
defer resp.Body.Close()
respBody, err := ioutil.ReadAll(resp.Body)
if err != nil {
return err
}
if resp.StatusCode > 299 {
return fmt.Errorf("Unexpected status code received: %d", resp.StatusCode)
}
var respFull SureTaxResponse
if err := json.Unmarshal(respBody, &respFull); err != nil {
return err
}
var stResp STResponse
if err := json.Unmarshal([]byte(respFull.D), &stResp); err != nil {
return err
}
if stResp.ResponseCode != "9999" {
cdr.ExtraInfo = stResp.HeaderMessage
return nil // No error because the request was processed by SureTax, error will be in the ExtraInfo
}
// Write cost to CDR
totalTax, err := strconv.ParseFloat(stResp.TotalTax, 64)
if err != nil {
cdr.ExtraInfo = err.Error()
}
if !stCfg.IncludeLocalCost {
cdr.Cost = utils.Round(totalTax, config.CgrConfig().RoundingDecimals, utils.ROUNDING_MIDDLE)
} else {
cdr.Cost = utils.Round(cdr.Cost+totalTax, config.CgrConfig().RoundingDecimals, utils.ROUNDING_MIDDLE)
}
// Add response into extra fields to be available for later review
cdr.ExtraFields[utils.META_SURETAX] = respFull.D
return nil
}
示例6: updateDurationFromEvent
// Computes duration out of setup time of the callEnd
func (osipsEv *OsipsEvent) updateDurationFromEvent(updatedOsipsEv *OsipsEvent) error {
endTime, err := updatedOsipsEv.GetSetupTime(TIME, config.CgrConfig().DefaultTimezone)
if err != nil {
return err
}
answerTime, err := osipsEv.GetAnswerTime(utils.META_DEFAULT, config.CgrConfig().DefaultTimezone)
osipsEv.osipsEvent.AttrValues[OSIPS_DURATION] = endTime.Sub(answerTime).String()
osipsEv.osipsEvent.AttrValues["method"] = "UPDATE" // So we can know it is an end event
osipsEv.osipsEvent.AttrValues[OSIPS_SIPCODE] = updatedOsipsEv.osipsEvent.AttrValues[OSIPS_SIPCODE]
return nil
}
示例7: SureTaxProcessCdr
func SureTaxProcessCdr(cdr *StoredCdr) error {
stCfg := config.CgrConfig().SureTaxCfg()
if stCfg == nil {
return errors.New("Invalid SureTax configuration")
}
if sureTaxClient == nil { // First time used, init the client here
tr := &http.Transport{
TLSClientConfig: &tls.Config{InsecureSkipVerify: config.CgrConfig().HttpSkipTlsVerify},
}
sureTaxClient = &http.Client{Transport: tr}
}
req, err := NewSureTaxRequest(cdr, stCfg)
if err != nil {
return err
}
body, err := json.Marshal(req)
if err != nil {
return err
}
utils.Logger.Debug(fmt.Sprintf("###SureTax NewSureTaxRequest: %+v, ItemList: %+v\n", req, req.ItemList[0]))
resp, err := sureTaxClient.Post(stCfg.Url, "application/json", bytes.NewBuffer(body))
if err != nil {
return err
}
defer resp.Body.Close()
respBody, err := ioutil.ReadAll(resp.Body)
if err != nil {
return err
}
if resp.StatusCode > 299 {
return fmt.Errorf("Unexpected status code received: %d", resp.StatusCode)
}
var stResp SureTaxResponse
if err := json.Unmarshal(respBody, &stResp); err != nil {
return err
}
utils.Logger.Debug(fmt.Sprintf("###SureTax received response: %+v\n", stResp))
if stResp.ResponseCode != 9999 {
cdr.ExtraInfo = stResp.HeaderMessage
return nil // No error because the request was processed by SureTax, error will be in the ExtraInfo
}
// Write cost to CDR
if !stCfg.IncludeLocalCost {
cdr.Cost = utils.Round(stResp.TotalTax, config.CgrConfig().RoundingDecimals, utils.ROUNDING_MIDDLE)
} else {
cdr.Cost = utils.Round(cdr.Cost+stResp.TotalTax, config.CgrConfig().RoundingDecimals, utils.ROUNDING_MIDDLE)
}
// Add response into extra fields to be available for later review
cdr.ExtraFields[utils.META_SURETAX] = string(respBody)
return nil
}
示例8: ParseEventValue
// Useful for CDR generation
func (kev KamEvent) ParseEventValue(rsrFld *utils.RSRField, timezone string) string {
sTime, _ := kev.GetSetupTime(utils.META_DEFAULT, config.CgrConfig().DefaultTimezone)
aTime, _ := kev.GetAnswerTime(utils.META_DEFAULT, config.CgrConfig().DefaultTimezone)
duration, _ := kev.GetDuration(utils.META_DEFAULT)
switch rsrFld.Id {
case utils.CGRID:
return rsrFld.ParseValue(kev.GetCgrId(timezone))
case utils.TOR:
return rsrFld.ParseValue(utils.VOICE)
case utils.ACCID:
return rsrFld.ParseValue(kev.GetUUID())
case utils.CDRHOST:
return rsrFld.ParseValue(kev.GetOriginatorIP(utils.META_DEFAULT))
case utils.CDRSOURCE:
return rsrFld.ParseValue(kev.GetCdrSource())
case utils.REQTYPE:
return rsrFld.ParseValue(kev.GetReqType(utils.META_DEFAULT))
case utils.DIRECTION:
return rsrFld.ParseValue(kev.GetDirection(utils.META_DEFAULT))
case utils.TENANT:
return rsrFld.ParseValue(kev.GetTenant(utils.META_DEFAULT))
case utils.CATEGORY:
return rsrFld.ParseValue(kev.GetCategory(utils.META_DEFAULT))
case utils.ACCOUNT:
return rsrFld.ParseValue(kev.GetAccount(utils.META_DEFAULT))
case utils.SUBJECT:
return rsrFld.ParseValue(kev.GetSubject(utils.META_DEFAULT))
case utils.DESTINATION:
return rsrFld.ParseValue(kev.GetDestination(utils.META_DEFAULT))
case utils.SETUP_TIME:
return rsrFld.ParseValue(sTime.String())
case utils.ANSWER_TIME:
return rsrFld.ParseValue(aTime.String())
case utils.USAGE:
return rsrFld.ParseValue(strconv.FormatFloat(utils.Round(duration.Seconds(), 0, utils.ROUNDING_MIDDLE), 'f', -1, 64))
case utils.PDD:
return rsrFld.ParseValue(strconv.FormatFloat(utils.Round(duration.Seconds(), 0, utils.ROUNDING_MIDDLE), 'f', -1, 64))
case utils.SUPPLIER:
return rsrFld.ParseValue(kev.GetSupplier(utils.META_DEFAULT))
case utils.DISCONNECT_CAUSE:
return rsrFld.ParseValue(kev.GetDisconnectCause(utils.META_DEFAULT))
case utils.MEDI_RUNID:
return rsrFld.ParseValue(utils.META_DEFAULT)
case utils.COST:
return rsrFld.ParseValue("-1.0")
default:
return rsrFld.ParseValue(kev.GetExtraFields()[rsrFld.Id])
}
}
示例9: AsCallDescriptor
func (self *LcrRequest) AsCallDescriptor(timezone string) (*CallDescriptor, error) {
if len(self.Account) == 0 || len(self.Destination) == 0 {
return nil, utils.ErrMandatoryIeMissing
}
// Set defaults
if len(self.Direction) == 0 {
self.Direction = utils.OUT
}
if len(self.Tenant) == 0 {
self.Tenant = config.CgrConfig().DefaultTenant
}
if len(self.Category) == 0 {
self.Category = config.CgrConfig().DefaultCategory
}
if len(self.Subject) == 0 {
self.Subject = self.Account
}
var timeStart time.Time
var err error
if len(self.SetupTime) == 0 {
timeStart = time.Now()
} else if timeStart, err = utils.ParseTimeDetectLayout(self.SetupTime, timezone); err != nil {
return nil, err
}
var callDur time.Duration
if len(self.Duration) == 0 {
callDur = time.Duration(1) * time.Minute
} else if callDur, err = utils.ParseDurationWithSecs(self.Duration); err != nil {
return nil, err
}
cd := &CallDescriptor{
Direction: self.Direction,
Tenant: self.Tenant,
Category: self.Category,
Account: self.Account,
Subject: self.Subject,
Destination: self.Destination,
TimeStart: timeStart,
TimeEnd: timeStart.Add(callDur),
}
if self.ExtraFields != nil {
cd.ExtraFields = make(map[string]string)
}
for key, val := range self.ExtraFields {
cd.ExtraFields[key] = val
}
return cd, nil
}
示例10: onChannelHangupComplete
func (sm *FSSessionManager) onChannelHangupComplete(ev engine.Event) {
if ev.GetReqType(utils.META_DEFAULT) == utils.META_NONE { // Do not process this request
return
}
var s *Session
for i := 0; i < 2; i++ { // Protect us against concurrency, wait a couple of seconds for the answer to be populated before we process hangup
s = sm.sessions.getSession(ev.GetUUID())
if s != nil {
break
}
time.Sleep(time.Duration(i+1) * time.Second)
}
if s != nil { // Handled by us, cleanup here
if err := sm.sessions.removeSession(s, ev); err != nil {
utils.Logger.Err(err.Error())
}
}
if sm.cfg.CreateCdr {
sm.ProcessCdr(ev.AsStoredCdr(config.CgrConfig().DefaultTimezone))
}
var reply string
attrRU := utils.AttrRLsResourceUsage{
ResourceUsageID: ev.GetUUID(),
Event: ev.(FSEvent).AsMapStringInterface(sm.timezone),
RequestedUnits: 1,
}
if sm.rls != nil {
if err := sm.rls.Call("RLsV1.TerminateResourceUsage", attrRU, &reply); err != nil {
utils.Logger.Err(fmt.Sprintf("<SM-FreeSWITCH> RLs API error: %s", err.Error()))
}
}
}
示例11: GetExtraFields
func (fsev FSEvent) GetExtraFields() map[string]string {
extraFields := make(map[string]string)
for _, fldRule := range config.CgrConfig().FSCdrExtraFields {
extraFields[fldRule.Id] = fsev.ParseEventValue(fldRule)
}
return extraFields
}
示例12: callUrlAsync
// Does not block for posts, no error reports
func callUrlAsync(ub *Account, sq *StatsQueueTriggered, a *Action) error {
var o interface{}
if ub != nil {
o = ub
}
if sq != nil {
o = sq
}
jsn, err := json.Marshal(o)
if err != nil {
return err
}
cfg := config.CgrConfig()
go func() {
for i := 0; i < 5; i++ { // Loop so we can increase the success rate on best effort
if _, err = utils.HttpJsonPost(a.ExtraParameters, cfg.HttpSkipTlsVerify, o); err == nil {
break // Success, no need to reinterate
} else if i == 4 { // Last iteration, syslog the warning
Logger.Warning(fmt.Sprintf("<Triggers> WARNING: Failed calling url: [%s], error: [%s], triggered: %s", a.ExtraParameters, err.Error(), jsn))
break
}
time.Sleep(time.Duration(i) * time.Minute)
}
}()
return nil
}
示例13: setCgrLcr
// Queries LCR and sets the cgr_lcr channel variable
func (sm *FSSessionManager) setCgrLcr(ev engine.Event, connId string) error {
var lcrCost engine.LCRCost
startTime, err := ev.GetSetupTime(utils.META_DEFAULT, sm.timezone)
if err != nil {
return err
}
cd := &engine.CallDescriptor{
Direction: ev.GetDirection(utils.META_DEFAULT),
Tenant: ev.GetTenant(utils.META_DEFAULT),
Category: ev.GetCategory(utils.META_DEFAULT),
Subject: ev.GetSubject(utils.META_DEFAULT),
Account: ev.GetAccount(utils.META_DEFAULT),
Destination: ev.GetDestination(utils.META_DEFAULT),
TimeStart: startTime,
TimeEnd: startTime.Add(config.CgrConfig().MaxCallDuration),
}
if err := sm.rater.GetLCR(&engine.AttrGetLcr{CallDescriptor: cd}, &lcrCost); err != nil {
return err
}
supps := []string{}
for _, supplCost := range lcrCost.SupplierCosts {
if dtcs, err := utils.NewDTCSFromRPKey(supplCost.Supplier); err != nil {
return err
} else if len(dtcs.Subject) != 0 {
supps = append(supps, dtcs.Subject)
}
}
fsArray := SliceAsFsArray(supps)
if _, err = sm.conns[connId].SendApiCmd(fmt.Sprintf("uuid_setvar %s cgr_notify %s\n\n", ev.GetUUID(), fsArray)); err != nil {
return err
}
return nil
}
示例14: callUrlAsync
// Does not block for posts, no error reports
func callUrlAsync(ub *Account, sq *StatsQueueTriggered, a *Action, acs Actions) error {
var o interface{}
if ub != nil {
o = ub
}
if sq != nil {
o = sq
}
jsn, err := json.Marshal(o)
if err != nil {
return err
}
cfg := config.CgrConfig()
fallbackPath := path.Join(cfg.HttpFailedDir, fmt.Sprintf("act_%s_%s_%s.json", a.ActionType, a.ExtraParameters, utils.GenUUID()))
go utils.NewHTTPPoster(config.CgrConfig().HttpSkipTlsVerify,
config.CgrConfig().ReplyTimeout).Post(a.ExtraParameters, utils.CONTENT_JSON, jsn, config.CgrConfig().HttpPosterAttempts, fallbackPath)
return nil
}
示例15: cgrRPCAction
/*
<< .Object.Property >>
Property can be a attribute or a method both used without ()
Please also note the initial dot .
Currently there are following objects that can be used:
Account - the account that this action is called on
Action - the action with all it's attributs
Actions - the list of actions in the current action set
Sq - StatsQueueTriggered object
We can actually use everythiong that go templates offer. You can read more here: https://golang.org/pkg/text/template/
*/
func cgrRPCAction(account *Account, sq *StatsQueueTriggered, a *Action, acs Actions) error {
// parse template
tmpl := template.New("extra_params")
tmpl.Delims("<<", ">>")
t, err := tmpl.Parse(a.ExtraParameters)
if err != nil {
utils.Logger.Err(fmt.Sprintf("error parsing *cgr_rpc template: %s", err.Error()))
return err
}
var buf bytes.Buffer
if err = t.Execute(&buf, struct {
Account *Account
Sq *StatsQueueTriggered
Action *Action
Actions Actions
}{account, sq, a, acs}); err != nil {
utils.Logger.Err(fmt.Sprintf("error executing *cgr_rpc template %s:", err.Error()))
return err
}
processedExtraParam := buf.String()
//utils.Logger.Info("ExtraParameters: " + parsedExtraParameters)
req := RPCRequest{}
if err := json.Unmarshal([]byte(processedExtraParam), &req); err != nil {
return err
}
params, err := utils.GetRpcParams(req.Method)
if err != nil {
return err
}
var client rpcclient.RpcClientConnection
if req.Address != utils.MetaInternal {
if client, err = rpcclient.NewRpcClient("tcp", req.Address, req.Attempts, 0, config.CgrConfig().ConnectTimeout, config.CgrConfig().ReplyTimeout, req.Transport, nil); err != nil {
return err
}
} else {
client = params.Object.(rpcclient.RpcClientConnection)
}
in, out := params.InParam, params.OutParam
//utils.Logger.Info("Params: " + utils.ToJSON(req.Params))
//p, err := utils.FromMapStringInterfaceValue(req.Params, in)
mapstructure.Decode(req.Params, in)
if err != nil {
utils.Logger.Info("<*cgr_rpc> err: " + err.Error())
return err
}
utils.Logger.Info(fmt.Sprintf("<*cgr_rpc> calling: %s with: %s", req.Method, utils.ToJSON(in)))
if !req.Async {
err = client.Call(req.Method, in, out)
utils.Logger.Info(fmt.Sprintf("<*cgr_rpc> result: %s err: %v", utils.ToJSON(out), err))
return err
}
go func() {
err := client.Call(req.Method, in, out)
utils.Logger.Info(fmt.Sprintf("<*cgr_rpc> result: %s err: %v", utils.ToJSON(out), err))
}()
return nil
}