Golang Block.TxLoc方法代码示例

// ConnectBlock is invoked by the index manager when a new block has been
// connected to the main chain.  This indexer adds a mapping for each address
// the transactions in the block involve.
//
// This is part of the Indexer interface.
func (idx *AddrIndex) ConnectBlock(dbTx database.Tx, block *btcutil.Block, view *blockchain.UtxoViewpoint) error {
	// The offset and length of the transactions within the serialized
	// block.
	txLocs, err := block.TxLoc()
	if err != nil {
		return err
	}

	// Get the internal block ID associated with the block.
	blockID, err := dbFetchBlockIDByHash(dbTx, block.Hash())
	if err != nil {
		return err
	}

	// Build all of the address to transaction mappings in a local map.
	addrsToTxns := make(writeIndexData)
	idx.indexBlock(addrsToTxns, block, view)

	// Add all of the index entries for each address.
	addrIdxBucket := dbTx.Metadata().Bucket(addrIndexKey)
	for addrKey, txIdxs := range addrsToTxns {
		for _, txIdx := range txIdxs {
			err := dbPutAddrIndexEntry(addrIdxBucket, addrKey,
				blockID, txLocs[txIdx])
			if err != nil {
				return err
			}
		}
	}

	return nil
}

// dbAddTxIndexEntries uses an existing database transaction to add a
// transaction index entry for every transaction in the passed block.
func dbAddTxIndexEntries(dbTx database.Tx, block *btcutil.Block, blockID uint32) error {
	// The offset and length of the transactions within the serialized
	// block.
	txLocs, err := block.TxLoc()
	if err != nil {
		return err
	}

	// As an optimization, allocate a single slice big enough to hold all
	// of the serialized transaction index entries for the block and
	// serialize them directly into the slice.  Then, pass the appropriate
	// subslice to the database to be written.  This approach significantly
	// cuts down on the number of required allocations.
	offset := 0
	serializedValues := make([]byte, len(block.Transactions())*txEntrySize)
	for i, tx := range block.Transactions() {
		putTxIndexEntry(serializedValues[offset:], blockID, txLocs[i])
		endOffset := offset + txEntrySize
		err := dbPutTxIndexEntry(dbTx, tx.Hash(),
			serializedValues[offset:endOffset:endOffset])
		if err != nil {
			return err
		}
		offset += txEntrySize
	}

	return nil
}

// indexBlockAddrs returns a populated index of the all the transactions in the
// passed block based on the addresses involved in each transaction.
func (a *addrIndexer) indexBlockAddrs(blk *btcutil.Block) (database.BlockAddrIndex, error) {
	addrIndex := make(database.BlockAddrIndex)
	txLocs, err := blk.TxLoc()
	if err != nil {
		return nil, err
	}

	for txIdx, tx := range blk.Transactions() {
		// Tx's offset and length in the block.
		locInBlock := &txLocs[txIdx]

		// Coinbases don't have any inputs.
		if !blockchain.IsCoinBase(tx) {
			// Index the SPK's of each input's previous outpoint
			// transaction.
			for _, txIn := range tx.MsgTx().TxIn {
				// Lookup and fetch the referenced output's tx.
				prevOut := txIn.PreviousOutPoint
				txList, err := a.server.db.FetchTxBySha(&prevOut.Hash)
				if len(txList) == 0 {
					return nil, fmt.Errorf("transaction %v not found",
						prevOut.Hash)
				}
				if err != nil {
					adxrLog.Errorf("Error fetching tx %v: %v",
						prevOut.Hash, err)
					return nil, err
				}
				prevOutTx := txList[len(txList)-1]
				inputOutPoint := prevOutTx.Tx.TxOut[prevOut.Index]

				indexScriptPubKey(addrIndex, inputOutPoint.PkScript, locInBlock)
			}
		}

		for _, txOut := range tx.MsgTx().TxOut {
			indexScriptPubKey(addrIndex, txOut.PkScript, locInBlock)
		}
	}
	return addrIndex, nil
}

// InsertBlock inserts raw block and transaction data from a block into the
// database.  The first block inserted into the database will be treated as the
// genesis block.  Every subsequent block insert requires the referenced parent
// block to already exist.
func (db *LevelDb) InsertBlock(block *btcutil.Block) (height int64, rerr error) {
	db.dbLock.Lock()
	defer db.dbLock.Unlock()
	defer func() {
		if rerr == nil {
			rerr = db.processBatches()
		} else {
			db.lBatch().Reset()
		}
	}()

	blocksha := block.Sha()
	mblock := block.MsgBlock()
	rawMsg, err := block.Bytes()
	if err != nil {
		log.Warnf("Failed to obtain raw block sha %v", blocksha)
		return 0, err
	}
	txloc, err := block.TxLoc()
	if err != nil {
		log.Warnf("Failed to obtain raw block sha %v", blocksha)
		return 0, err
	}

	// Insert block into database
	newheight, err := db.insertBlockData(blocksha, &mblock.Header.PrevBlock,
		rawMsg)
	if err != nil {
		log.Warnf("Failed to insert block %v %v %v", blocksha,
			&mblock.Header.PrevBlock, err)
		return 0, err
	}

	// At least two blocks in the long past were generated by faulty
	// miners, the sha of the transaction exists in a previous block,
	// detect this condition and 'accept' the block.
	for txidx, tx := range mblock.Transactions {
		txsha, err := block.TxSha(txidx)
		if err != nil {
			log.Warnf("failed to compute tx name block %v idx %v err %v", blocksha, txidx, err)
			return 0, err
		}
		spentbuflen := (len(tx.TxOut) + 7) / 8
		spentbuf := make([]byte, spentbuflen, spentbuflen)
		if len(tx.TxOut)%8 != 0 {
			for i := uint(len(tx.TxOut) % 8); i < 8; i++ {
				spentbuf[spentbuflen-1] |= (byte(1) << i)
			}
		}

		err = db.insertTx(txsha, newheight, txloc[txidx].TxStart, txloc[txidx].TxLen, spentbuf)
		if err != nil {
			log.Warnf("block %v idx %v failed to insert tx %v %v err %v", blocksha, newheight, &txsha, txidx, err)
			return 0, err
		}

		// Some old blocks contain duplicate transactions
		// Attempt to cleanly bypass this problem by marking the
		// first as fully spent.
		// http://blockexplorer.com/b/91812 dup in 91842
		// http://blockexplorer.com/b/91722 dup in 91880
		if newheight == 91812 {
			dupsha, err := wire.NewShaHashFromStr("d5d27987d2a3dfc724e359870c6644b40e497bdc0589a033220fe15429d88599")
			if err != nil {
				panic("invalid sha string in source")
			}
			if txsha.IsEqual(dupsha) {
				// marking TxOut[0] as spent
				po := wire.NewOutPoint(dupsha, 0)
				txI := wire.NewTxIn(po, []byte("garbage"))

				var spendtx wire.MsgTx
				spendtx.AddTxIn(txI)
				err = db.doSpend(&spendtx)
				if err != nil {
					log.Warnf("block %v idx %v failed to spend tx %v %v err %v", blocksha, newheight, &txsha, txidx, err)
				}
			}
		}
		if newheight == 91722 {
			dupsha, err := wire.NewShaHashFromStr("e3bf3d07d4b0375638d5f1db5255fe07ba2c4cb067cd81b84ee974b6585fb468")
			if err != nil {
				panic("invalid sha string in source")
			}
			if txsha.IsEqual(dupsha) {
				// marking TxOut[0] as spent
				po := wire.NewOutPoint(dupsha, 0)
				txI := wire.NewTxIn(po, []byte("garbage"))

				var spendtx wire.MsgTx
				spendtx.AddTxIn(txI)
				err = db.doSpend(&spendtx)
				if err != nil {
					log.Warnf("block %v idx %v failed to spend tx %v %v err %v", blocksha, newheight, &txsha, txidx, err)
				}
			}
//.........这里部分代码省略.........

// testAddrIndexOperations ensures that all normal operations concerning
// the optional address index function correctly.
func testAddrIndexOperations(t *testing.T, db database.Db, newestBlock *btcutil.Block, newestSha *wire.ShaHash, newestBlockIdx int32) {
	// Metadata about the current addr index state should be unset.
	sha, height, err := db.FetchAddrIndexTip()
	if err != database.ErrAddrIndexDoesNotExist {
		t.Fatalf("Address index metadata shouldn't be in db, hasn't been built up yet.")
	}

	var zeroHash wire.ShaHash
	if !sha.IsEqual(&zeroHash) {
		t.Fatalf("AddrIndexTip wrong hash got: %s, want %s", sha, &zeroHash)

	}

	if height != -1 {
		t.Fatalf("Addrindex not built up, yet a block index tip has been set to: %d.", height)
	}

	// Test enforcement of constraints for "limit" and "skip"
	var fakeAddr btcutil.Address
	_, err = db.FetchTxsForAddr(fakeAddr, -1, 0)
	if err == nil {
		t.Fatalf("Negative value for skip passed, should return an error")
	}

	_, err = db.FetchTxsForAddr(fakeAddr, 0, -1)
	if err == nil {
		t.Fatalf("Negative value for limit passed, should return an error")
	}

	// Simple test to index outputs(s) of the first tx.
	testIndex := make(database.BlockAddrIndex)
	testTx, err := newestBlock.Tx(0)
	if err != nil {
		t.Fatalf("Block has no transactions, unable to test addr "+
			"indexing, err %v", err)
	}

	// Extract the dest addr from the tx.
	_, testAddrs, _, err := txscript.ExtractPkScriptAddrs(testTx.MsgTx().TxOut[0].PkScript, &chaincfg.MainNetParams)
	if err != nil {
		t.Fatalf("Unable to decode tx output, err %v", err)
	}

	// Extract the hash160 from the output script.
	var hash160Bytes [ripemd160.Size]byte
	testHash160 := testAddrs[0].(*btcutil.AddressPubKey).AddressPubKeyHash().ScriptAddress()
	copy(hash160Bytes[:], testHash160[:])

	// Create a fake index.
	blktxLoc, _ := newestBlock.TxLoc()
	testIndex[hash160Bytes] = []*wire.TxLoc{&blktxLoc[0]}

	// Insert our test addr index into the DB.
	err = db.UpdateAddrIndexForBlock(newestSha, newestBlockIdx, testIndex)
	if err != nil {
		t.Fatalf("UpdateAddrIndexForBlock: failed to index"+
			" addrs for block #%d (%s) "+
			"err %v", newestBlockIdx, newestSha, err)
	}

	// Chain Tip of address should've been updated.
	assertAddrIndexTipIsUpdated(db, t, newestSha, newestBlockIdx)

	// Check index retrieval.
	txReplies, err := db.FetchTxsForAddr(testAddrs[0], 0, 1000)
	if err != nil {
		t.Fatalf("FetchTxsForAddr failed to correctly fetch txs for an "+
			"address, err %v", err)
	}
	// Should have one reply.
	if len(txReplies) != 1 {
		t.Fatalf("Failed to properly index tx by address.")
	}

	// Our test tx and indexed tx should have the same sha.
	indexedTx := txReplies[0]
	if !bytes.Equal(indexedTx.Sha.Bytes(), testTx.Sha().Bytes()) {
		t.Fatalf("Failed to fetch proper indexed tx. Expected sha %v, "+
			"fetched %v", testTx.Sha(), indexedTx.Sha)
	}

	// Shut down DB.
	db.Sync()
	db.Close()

	// Re-Open, tip still should be updated to current height and sha.
	db, err = database.OpenDB("leveldb", "tstdbopmode")
	if err != nil {
		t.Fatalf("Unable to re-open created db, err %v", err)
	}
	assertAddrIndexTipIsUpdated(db, t, newestSha, newestBlockIdx)

	// Delete the entire index.
	err = db.DeleteAddrIndex()
	if err != nil {
		t.Fatalf("Couldn't delete address index, err %v", err)
	}

//.........这里部分代码省略.........