本文整理汇总了Golang中github.com/btcsuite/btcd/wire.BlockHeader类的典型用法代码示例。如果您正苦于以下问题:Golang BlockHeader类的具体用法?Golang BlockHeader怎么用?Golang BlockHeader使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
在下文中一共展示了BlockHeader类的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。
示例1: calcDiffAdjust
/* calcDiff returns a bool given two block headers. This bool is
true if the correct dificulty adjustment is seen in the "next" header.
Only feed it headers n-2016 and n-1, otherwise it will calculate a difficulty
when no adjustment should take place, and return false.
Note that the epoch is actually 2015 blocks long, which is confusing. */
func calcDiffAdjust(start, end wire.BlockHeader, p *chaincfg.Params) uint32 {
duration := end.Timestamp.UnixNano() - start.Timestamp.UnixNano()
if duration < minRetargetTimespan {
log.Printf("whoa there, block %s off-scale high 4X diff adjustment!",
end.BlockSha().String())
duration = minRetargetTimespan
} else if duration > maxRetargetTimespan {
log.Printf("Uh-oh! block %s off-scale low 0.25X diff adjustment!\n",
end.BlockSha().String())
duration = maxRetargetTimespan
}
// calculation of new 32-byte difficulty target
// first turn the previous target into a big int
prevTarget := blockchain.CompactToBig(start.Bits)
// new target is old * duration...
newTarget := new(big.Int).Mul(prevTarget, big.NewInt(duration))
// divided by 2 weeks
newTarget.Div(newTarget, big.NewInt(int64(targetTimespan)))
// clip again if above minimum target (too easy)
if newTarget.Cmp(p.PowLimit) > 0 {
newTarget.Set(p.PowLimit)
}
// calculate and return 4-byte 'bits' difficulty from 32-byte target
return blockchain.BigToCompact(newTarget)
}
示例2: checkProofOfWork
// checkProofOfWork ensures the block header bits which indicate the target
// difficulty is in min/max range and that the block hash is less than the
// target difficulty as claimed.
//
// The flags modify the behavior of this function as follows:
// - BFNoPoWCheck: The check to ensure the block hash is less than the target
// difficulty is not performed.
func checkProofOfWork(header *wire.BlockHeader, powLimit *big.Int, flags BehaviorFlags) error {
// The target difficulty must be larger than zero.
target := CompactToBig(header.Bits)
if target.Sign() <= 0 {
str := fmt.Sprintf("block target difficulty of %064x is too low",
target)
return ruleError(ErrUnexpectedDifficulty, str)
}
// The target difficulty must be less than the maximum allowed.
if target.Cmp(powLimit) > 0 {
str := fmt.Sprintf("block target difficulty of %064x is "+
"higher than max of %064x", target, powLimit)
return ruleError(ErrUnexpectedDifficulty, str)
}
// The block hash must be less than the claimed target unless the flag
// to avoid proof of work checks is set.
if flags&BFNoPoWCheck != BFNoPoWCheck {
// The block hash must be less than the claimed target.
hash := header.BlockHash()
hashNum := HashToBig(&hash)
if hashNum.Cmp(target) > 0 {
str := fmt.Sprintf("block hash of %064x is higher than "+
"expected max of %064x", hashNum, target)
return ruleError(ErrHighHash, str)
}
}
return nil
}
示例3: Receive
// Receive waits for the response promised by the future and returns the
// blockheader requested from the server given its hash.
func (r FutureGetBlockHeaderResult) Receive() (*wire.BlockHeader, error) {
res, err := receiveFuture(r)
if err != nil {
return nil, err
}
// Unmarshal result as a string.
var bhHex string
err = json.Unmarshal(res, &bhHex)
if err != nil {
return nil, err
}
serializedBH, err := hex.DecodeString(bhHex)
if err != nil {
return nil, err
}
// Deserialize the blockheader and return it.
var bh wire.BlockHeader
err = bh.Deserialize(bytes.NewReader(serializedBH))
if err != nil {
return nil, err
}
return &bh, err
}
示例4: AskForMerkBlocks
func (s *SPVCon) AskForMerkBlocks(current, last uint32) error {
var hdr wire.BlockHeader
_, err := s.headerFile.Seek(int64(current*80), os.SEEK_SET)
if err != nil {
return err
}
for current < last {
err = hdr.Deserialize(s.headerFile)
if err != nil {
return err
}
current++
bHash := hdr.BlockSha()
iv1 := wire.NewInvVect(wire.InvTypeFilteredBlock, &bHash)
gdataMsg := wire.NewMsgGetData()
err = gdataMsg.AddInvVect(iv1)
if err != nil {
return err
}
s.outMsgQueue <- gdataMsg
}
return nil
}
示例5: dbFetchHeaderByHash
// dbFetchHeaderByHash uses an existing database transaction to retrieve the
// block header for the provided hash.
func dbFetchHeaderByHash(dbTx database.Tx, hash *chainhash.Hash) (*wire.BlockHeader, error) {
headerBytes, err := dbTx.FetchBlockHeader(hash)
if err != nil {
return nil, err
}
var header wire.BlockHeader
err = header.Deserialize(bytes.NewReader(headerBytes))
if err != nil {
return nil, err
}
return &header, nil
}
示例6: NewHeaderRecord
func NewHeaderRecord(hdr *wire.BlockHeader) *HeaderRecord {
record := &HeaderRecord{
block_hash: hdr.BlockSha(), // this is calculated, not sent
version: hdr.Version,
prev_block: hdr.PrevBlock,
merkle_root: hdr.MerkleRoot,
timestamp: hdr.Timestamp,
bits: hdr.Bits,
nonce: hdr.Nonce,
txn_count: 0,
}
return record
}
示例7: AskForHeaders
func (s *SPVCon) AskForHeaders() error {
var hdr wire.BlockHeader
ghdr := wire.NewMsgGetHeaders()
ghdr.ProtocolVersion = s.localVersion
s.headerMutex.Lock() // start header file ops
info, err := s.headerFile.Stat()
if err != nil {
return err
}
headerFileSize := info.Size()
if headerFileSize == 0 || headerFileSize%80 != 0 { // header file broken
return fmt.Errorf("Header file not a multiple of 80 bytes")
}
// seek to 80 bytes from end of file
ns, err := s.headerFile.Seek(-80, os.SEEK_END)
if err != nil {
log.Printf("can't seek\n")
return err
}
log.Printf("suk to offset %d (should be near the end\n", ns)
// get header from last 80 bytes of file
err = hdr.Deserialize(s.headerFile)
if err != nil {
log.Printf("can't Deserialize")
return err
}
s.headerMutex.Unlock() // done with header file
cHash := hdr.BlockSha()
err = ghdr.AddBlockLocatorHash(&cHash)
if err != nil {
return err
}
fmt.Printf("get headers message has %d header hashes, first one is %s\n",
len(ghdr.BlockLocatorHashes), ghdr.BlockLocatorHashes[0].String())
s.outMsgQueue <- ghdr
return nil
}
示例8: FetchBlockHeaderBySha
// FetchBlockHeaderBySha - return a ShaHash
func (db *LevelDb) FetchBlockHeaderBySha(sha *wire.ShaHash) (bh *wire.BlockHeader, err error) {
db.dbLock.Lock()
defer db.dbLock.Unlock()
// Read the raw block from the database.
buf, _, err := db.fetchSha(sha)
if err != nil {
return nil, err
}
// Only deserialize the header portion and ensure the transaction count
// is zero since this is a standalone header.
var blockHeader wire.BlockHeader
err = blockHeader.Deserialize(bytes.NewReader(buf))
if err != nil {
return nil, err
}
bh = &blockHeader
return bh, err
}
示例9: solveBlock
// solveBlock attempts to find a nonce which makes the passed block header hash
// to a value less than the target difficulty. When a successful solution is
// found true is returned and the nonce field of the passed header is updated
// with the solution. False is returned if no solution exists.
func solveBlock(header *wire.BlockHeader, targetDifficulty *big.Int) bool {
// sbResult is used by the solver goroutines to send results.
type sbResult struct {
found bool
nonce uint32
}
// solver accepts a block header and a nonce range to test. It is
// intended to be run as a goroutine.
quit := make(chan bool)
results := make(chan sbResult)
solver := func(hdr wire.BlockHeader, startNonce, stopNonce uint32) {
// We need to modify the nonce field of the header, so make sure
// we work with a copy of the original header.
for i := startNonce; i >= startNonce && i <= stopNonce; i++ {
select {
case <-quit:
return
default:
hdr.Nonce = i
hash := hdr.BlockHash()
if blockchain.HashToBig(&hash).Cmp(targetDifficulty) <= 0 {
results <- sbResult{true, i}
return
}
}
}
results <- sbResult{false, 0}
}
startNonce := uint32(0)
stopNonce := uint32(math.MaxUint32)
numCores := uint32(runtime.NumCPU())
noncesPerCore := (stopNonce - startNonce) / numCores
for i := uint32(0); i < numCores; i++ {
rangeStart := startNonce + (noncesPerCore * i)
rangeStop := startNonce + (noncesPerCore * (i + 1)) - 1
if i == numCores-1 {
rangeStop = stopNonce
}
go solver(*header, rangeStart, rangeStop)
}
for i := uint32(0); i < numCores; i++ {
result := <-results
if result.found {
close(quit)
header.Nonce = result.nonce
return true
}
}
return false
}
示例10: checkProofOfWork
/* checkProofOfWork verifies the header hashes into something
lower than specified by the 4-byte bits field. */
func checkProofOfWork(header wire.BlockHeader, p *chaincfg.Params) bool {
target := blockchain.CompactToBig(header.Bits)
// The target must more than 0. Why can you even encode negative...
if target.Sign() <= 0 {
log.Printf("block target %064x is neagtive(??)\n", target.Bytes())
return false
}
// The target must be less than the maximum allowed (difficulty 1)
if target.Cmp(p.PowLimit) > 0 {
log.Printf("block target %064x is "+
"higher than max of %064x", target, p.PowLimit.Bytes())
return false
}
// The header hash must be less than the claimed target in the header.
blockHash := header.BlockSha()
hashNum := blockchain.ShaHashToBig(&blockHash)
if hashNum.Cmp(target) > 0 {
log.Printf("block hash %064x is higher than "+
"required target of %064x", hashNum, target)
return false
}
return true
}
示例11: checkBlockHeaderContext
// checkBlockHeaderContext peforms several validation checks on the block header
// which depend on its position within the block chain.
//
// The flags modify the behavior of this function as follows:
// - BFFastAdd: All checks except those involving comparing the header against
// the checkpoints are not performed.
//
// This function MUST be called with the chain state lock held (for writes).
func (b *BlockChain) checkBlockHeaderContext(header *wire.BlockHeader, prevNode *blockNode, flags BehaviorFlags) error {
// The genesis block is valid by definition.
if prevNode == nil {
return nil
}
fastAdd := flags&BFFastAdd == BFFastAdd
if !fastAdd {
// Ensure the difficulty specified in the block header matches
// the calculated difficulty based on the previous block and
// difficulty retarget rules.
expectedDifficulty, err := b.calcNextRequiredDifficulty(prevNode,
header.Timestamp)
if err != nil {
return err
}
blockDifficulty := header.Bits
if blockDifficulty != expectedDifficulty {
str := "block difficulty of %d is not the expected value of %d"
str = fmt.Sprintf(str, blockDifficulty, expectedDifficulty)
return ruleError(ErrUnexpectedDifficulty, str)
}
// Ensure the timestamp for the block header is after the
// median time of the last several blocks (medianTimeBlocks).
medianTime, err := b.calcPastMedianTime(prevNode)
if err != nil {
log.Errorf("calcPastMedianTime: %v", err)
return err
}
if !header.Timestamp.After(medianTime) {
str := "block timestamp of %v is not after expected %v"
str = fmt.Sprintf(str, header.Timestamp, medianTime)
return ruleError(ErrTimeTooOld, str)
}
}
// The height of this block is one more than the referenced previous
// block.
blockHeight := prevNode.height + 1
// Ensure chain matches up to predetermined checkpoints.
blockHash := header.BlockHash()
if !b.verifyCheckpoint(blockHeight, &blockHash) {
str := fmt.Sprintf("block at height %d does not match "+
"checkpoint hash", blockHeight)
return ruleError(ErrBadCheckpoint, str)
}
// Find the previous checkpoint and prevent blocks which fork the main
// chain before it. This prevents storage of new, otherwise valid,
// blocks which build off of old blocks that are likely at a much easier
// difficulty and therefore could be used to waste cache and disk space.
checkpointBlock, err := b.findPreviousCheckpoint()
if err != nil {
return err
}
if checkpointBlock != nil && blockHeight < checkpointBlock.Height() {
str := fmt.Sprintf("block at height %d forks the main chain "+
"before the previous checkpoint at height %d",
blockHeight, checkpointBlock.Height())
return ruleError(ErrForkTooOld, str)
}
if !fastAdd {
// Reject version 3 blocks once a majority of the network has
// upgraded. This is part of BIP0065.
if header.Version < 4 && b.isMajorityVersion(4, prevNode,
b.chainParams.BlockRejectNumRequired) {
str := "new blocks with version %d are no longer valid"
str = fmt.Sprintf(str, header.Version)
return ruleError(ErrBlockVersionTooOld, str)
}
// Reject version 2 blocks once a majority of the network has
// upgraded. This is part of BIP0066.
if header.Version < 3 && b.isMajorityVersion(3, prevNode,
b.chainParams.BlockRejectNumRequired) {
str := "new blocks with version %d are no longer valid"
str = fmt.Sprintf(str, header.Version)
return ruleError(ErrBlockVersionTooOld, str)
}
// Reject version 1 blocks once a majority of the network has
// upgraded. This is part of BIP0034.
if header.Version < 2 && b.isMajorityVersion(2, prevNode,
b.chainParams.BlockRejectNumRequired) {
str := "new blocks with version %d are no longer valid"
str = fmt.Sprintf(str, header.Version)
//.........这里部分代码省略.........
示例12: Test_dupTx
func Test_dupTx(t *testing.T) {
// Ignore db remove errors since it means we didn't have an old one.
dbname := fmt.Sprintf("tstdbdup0")
dbnamever := dbname + ".ver"
_ = os.RemoveAll(dbname)
_ = os.RemoveAll(dbnamever)
db, err := database.CreateDB("leveldb", dbname)
if err != nil {
t.Errorf("Failed to open test database %v", err)
return
}
defer os.RemoveAll(dbname)
defer os.RemoveAll(dbnamever)
defer func() {
if err := db.Close(); err != nil {
t.Errorf("Close: unexpected error: %v", err)
}
}()
testdatafile := filepath.Join("testdata", "blocks1-256.bz2")
blocks, err := loadBlocks(t, testdatafile)
if err != nil {
t.Errorf("Unable to load blocks from test data for: %v",
err)
return
}
var lastSha *wire.ShaHash
// Populate with the fisrt 256 blocks, so we have blocks to 'mess with'
err = nil
out:
for height := int64(0); height < int64(len(blocks)); height++ {
block := blocks[height]
// except for NoVerify which does not allow lookups check inputs
mblock := block.MsgBlock()
var txneededList []*wire.ShaHash
for _, tx := range mblock.Transactions {
for _, txin := range tx.TxIn {
if txin.PreviousOutPoint.Index == uint32(4294967295) {
continue
}
origintxsha := &txin.PreviousOutPoint.Hash
txneededList = append(txneededList, origintxsha)
exists, err := db.ExistsTxSha(origintxsha)
if err != nil {
t.Errorf("ExistsTxSha: unexpected error %v ", err)
}
if !exists {
t.Errorf("referenced tx not found %v ", origintxsha)
}
_, err = db.FetchTxBySha(origintxsha)
if err != nil {
t.Errorf("referenced tx not found %v err %v ", origintxsha, err)
}
}
}
txlist := db.FetchUnSpentTxByShaList(txneededList)
for _, txe := range txlist {
if txe.Err != nil {
t.Errorf("tx list fetch failed %v err %v ", txe.Sha, txe.Err)
break out
}
}
newheight, err := db.InsertBlock(block)
if err != nil {
t.Errorf("failed to insert block %v err %v", height, err)
break out
}
if newheight != height {
t.Errorf("height mismatch expect %v returned %v", height, newheight)
break out
}
newSha, blkid, err := db.NewestSha()
if err != nil {
t.Errorf("failed to obtain latest sha %v %v", height, err)
}
if blkid != height {
t.Errorf("height doe not match latest block height %v %v %v", blkid, height, err)
}
blkSha := block.Sha()
if *newSha != *blkSha {
t.Errorf("Newest block sha does not match freshly inserted one %v %v %v ", newSha, blkSha, err)
}
lastSha = blkSha
}
// generate a new block based on the last sha
// these block are not verified, so there are a bunch of garbage fields
// in the 'generated' block.
var bh wire.BlockHeader
//.........这里部分代码省略.........
示例13: IngestHeaders
func (s *SPVCon) IngestHeaders(m *wire.MsgHeaders) (bool, error) {
var err error
_, err = s.headerFile.Seek(-80, os.SEEK_END)
if err != nil {
return false, err
}
var last wire.BlockHeader
err = last.Deserialize(s.headerFile)
if err != nil {
return false, err
}
prevHash := last.BlockSha()
gotNum := int64(len(m.Headers))
if gotNum > 0 {
fmt.Printf("got %d headers. Range:\n%s - %s\n",
gotNum, m.Headers[0].BlockSha().String(),
m.Headers[len(m.Headers)-1].BlockSha().String())
} else {
log.Printf("got 0 headers, we're probably synced up")
return false, nil
}
endPos, err := s.headerFile.Seek(0, os.SEEK_END)
if err != nil {
return false, err
}
// check first header returned to make sure it fits on the end
// of our header file
if !m.Headers[0].PrevBlock.IsEqual(&prevHash) {
// delete 100 headers if this happens! Dumb reorg.
log.Printf("possible reorg; header msg doesn't fit. points to %s, expect %s",
m.Headers[0].PrevBlock.String(), prevHash.String())
if endPos < 8080 {
// jeez I give up, back to genesis
s.headerFile.Truncate(80)
} else {
err = s.headerFile.Truncate(endPos - 8000)
if err != nil {
return false, fmt.Errorf("couldn't truncate header file")
}
}
return false, fmt.Errorf("Truncated header file to try again")
}
tip := endPos / 80
tip-- // move back header length so it can read last header
for _, resphdr := range m.Headers {
// write to end of file
err = resphdr.Serialize(s.headerFile)
if err != nil {
return false, err
}
// advance chain tip
tip++
// check last header
worked := CheckHeader(s.headerFile, tip, params)
if !worked {
if endPos < 8080 {
// jeez I give up, back to genesis
s.headerFile.Truncate(80)
} else {
err = s.headerFile.Truncate(endPos - 8000)
if err != nil {
return false, fmt.Errorf("couldn't truncate header file")
}
}
// probably should disconnect from spv node at this point,
// since they're giving us invalid headers.
return false, fmt.Errorf(
"Header %d - %s doesn't fit, dropping 100 headers.",
resphdr.BlockSha().String(), tip)
}
}
log.Printf("Headers to height %d OK.", tip)
return true, nil
}
示例14: AskForBlocks
// AskForMerkBlocks requests blocks from current to last
// right now this asks for 1 block per getData message.
// Maybe it's faster to ask for many in a each message?
func (s *SPVCon) AskForBlocks() error {
var hdr wire.BlockHeader
s.headerMutex.Lock() // lock just to check filesize
stat, err := os.Stat(headerFileName)
s.headerMutex.Unlock() // checked, unlock
endPos := stat.Size()
headerTip := int32(endPos/80) - 1 // move back 1 header length to read
dbTip, err := s.TS.GetDBSyncHeight()
if err != nil {
return err
}
fmt.Printf("dbTip %d headerTip %d\n", dbTip, headerTip)
if dbTip > headerTip {
return fmt.Errorf("error- db longer than headers! shouldn't happen.")
}
if dbTip == headerTip {
// nothing to ask for; set wait state and return
fmt.Printf("no blocks to request, entering wait state\n")
fmt.Printf("%d bytes received\n", s.RBytes)
s.inWaitState <- true
// also advertise any unconfirmed txs here
s.Rebroadcast()
return nil
}
fmt.Printf("will request merkleblocks %d to %d\n", dbTip, headerTip)
if !s.HardMode { // don't send this in hardmode! that's the whole point
// create initial filter
filt, err := s.TS.GimmeFilter()
if err != nil {
return err
}
// send filter
s.SendFilter(filt)
fmt.Printf("sent filter %x\n", filt.MsgFilterLoad().Filter)
}
// loop through all heights where we want merkleblocks.
for dbTip <= headerTip {
// load header from file
s.headerMutex.Lock() // seek to header we need
_, err = s.headerFile.Seek(int64((dbTip-1)*80), os.SEEK_SET)
if err != nil {
return err
}
err = hdr.Deserialize(s.headerFile) // read header, done w/ file for now
s.headerMutex.Unlock() // unlock after reading 1 header
if err != nil {
log.Printf("header deserialize error!\n")
return err
}
bHash := hdr.BlockSha()
// create inventory we're asking for
iv1 := new(wire.InvVect)
// if hardmode, ask for legit blocks, none of this ralphy stuff
if s.HardMode {
iv1 = wire.NewInvVect(wire.InvTypeBlock, &bHash)
} else { // ah well
iv1 = wire.NewInvVect(wire.InvTypeFilteredBlock, &bHash)
}
gdataMsg := wire.NewMsgGetData()
// add inventory
err = gdataMsg.AddInvVect(iv1)
if err != nil {
return err
}
hah := NewRootAndHeight(hdr.BlockSha(), dbTip)
if dbTip == headerTip { // if this is the last block, indicate finality
hah.final = true
}
s.outMsgQueue <- gdataMsg
// waits here most of the time for the queue to empty out
s.blockQueue <- hah // push height and mroot of requested block on queue
dbTip++
}
return nil
}
示例15: TestBlockHeaderSerialize
// TestBlockHeaderSerialize tests BlockHeader serialize and deserialize.
func TestBlockHeaderSerialize(t *testing.T) {
nonce := uint32(123123) // 0x1e0f3
// baseBlockHdr is used in the various tests as a baseline BlockHeader.
bits := uint32(0x1d00ffff)
baseBlockHdr := &wire.BlockHeader{
Version: 1,
PrevBlock: mainNetGenesisHash,
MerkleRoot: mainNetGenesisMerkleRoot,
Timestamp: time.Unix(0x495fab29, 0), // 2009-01-03 12:15:05 -0600 CST
Bits: bits,
Nonce: nonce,
}
// baseBlockHdrEncoded is the wire encoded bytes of baseBlockHdr.
baseBlockHdrEncoded := []byte{
0x01, 0x00, 0x00, 0x00, // Version 1
0x6f, 0xe2, 0x8c, 0x0a, 0xb6, 0xf1, 0xb3, 0x72,
0xc1, 0xa6, 0xa2, 0x46, 0xae, 0x63, 0xf7, 0x4f,
0x93, 0x1e, 0x83, 0x65, 0xe1, 0x5a, 0x08, 0x9c,
0x68, 0xd6, 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, // PrevBlock
0x3b, 0xa3, 0xed, 0xfd, 0x7a, 0x7b, 0x12, 0xb2,
0x7a, 0xc7, 0x2c, 0x3e, 0x67, 0x76, 0x8f, 0x61,
0x7f, 0xc8, 0x1b, 0xc3, 0x88, 0x8a, 0x51, 0x32,
0x3a, 0x9f, 0xb8, 0xaa, 0x4b, 0x1e, 0x5e, 0x4a, // MerkleRoot
0x29, 0xab, 0x5f, 0x49, // Timestamp
0xff, 0xff, 0x00, 0x1d, // Bits
0xf3, 0xe0, 0x01, 0x00, // Nonce
}
tests := []struct {
in *wire.BlockHeader // Data to encode
out *wire.BlockHeader // Expected decoded data
buf []byte // Serialized data
}{
{
baseBlockHdr,
baseBlockHdr,
baseBlockHdrEncoded,
},
}
t.Logf("Running %d tests", len(tests))
for i, test := range tests {
// Serialize the block header.
var buf bytes.Buffer
err := test.in.Serialize(&buf)
if err != nil {
t.Errorf("Serialize #%d error %v", i, err)
continue
}
if !bytes.Equal(buf.Bytes(), test.buf) {
t.Errorf("Serialize #%d\n got: %s want: %s", i,
spew.Sdump(buf.Bytes()), spew.Sdump(test.buf))
continue
}
// Deserialize the block header.
var bh wire.BlockHeader
rbuf := bytes.NewReader(test.buf)
err = bh.Deserialize(rbuf)
if err != nil {
t.Errorf("Deserialize #%d error %v", i, err)
continue
}
if !reflect.DeepEqual(&bh, test.out) {
t.Errorf("Deserialize #%d\n got: %s want: %s", i,
spew.Sdump(&bh), spew.Sdump(test.out))
continue
}
}
}