本文整理汇总了Golang中github.com/btcsuite/btcd/btcec.PublicKey类的典型用法代码示例。如果您正苦于以下问题:Golang PublicKey类的具体用法?Golang PublicKey怎么用?Golang PublicKey使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
在下文中一共展示了PublicKey类的14个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。
示例1: commitScriptToSelf
// commitScriptToSelf constructs the public key script for the output on the
// commitment transaction paying to the "owner" of said commitment transaction.
// If the other party learns of the pre-image to the revocation hash, then they
// can claim all the settled funds in the channel, plus the unsettled funds.
func commitScriptToSelf(csvTimeout uint32, selfKey, theirKey *btcec.PublicKey, revokeHash []byte) ([]byte, error) {
// This script is spendable under two conditions: either the 'csvTimeout'
// has passed and we can redeem our funds, or they have the pre-image
// to 'revokeHash'.
builder := txscript.NewScriptBuilder()
// If the pre-image for the revocation hash is presented, then allow a
// spend provided the proper signature.
builder.AddOp(txscript.OP_HASH160)
builder.AddData(revokeHash)
builder.AddOp(txscript.OP_EQUAL)
builder.AddOp(txscript.OP_IF)
builder.AddData(theirKey.SerializeCompressed())
builder.AddOp(txscript.OP_ELSE)
// Otherwise, we can re-claim our funds after a CSV delay of
// 'csvTimeout' timeout blocks, and a valid signature.
builder.AddInt64(int64(csvTimeout))
builder.AddOp(OP_CHECKSEQUENCEVERIFY)
builder.AddOp(txscript.OP_DROP)
builder.AddData(selfKey.SerializeCompressed())
builder.AddOp(txscript.OP_ENDIF)
builder.AddOp(txscript.OP_CHECKSIG)
return builder.Script()
}
示例2: generateKeyPair
// generateKeyPair generates and stores a secp256k1 keypair in a file.
func generateKeyPair(filename string) error {
key, err := ecdsa.GenerateKey(curve, rand.Reader)
if err != nil {
return err
}
pub := btcec.PublicKey{curve,
key.PublicKey.X,
key.PublicKey.Y}
priv := btcec.PrivateKey{key.PublicKey, key.D}
addr, err := address.NewAddressPubKeyHash(Hash160(pub.SerializeCompressed()),
PubKeyHashAddrID)
if err != nil {
return err
}
privWif := NewWIF(priv)
var buf bytes.Buffer
buf.WriteString("Address: ")
buf.WriteString(addr.EncodeAddress())
buf.WriteString("\n")
buf.WriteString("Private key: ")
buf.WriteString(privWif.String())
buf.WriteString("\n")
err = writeNewFile(filename, buf.Bytes(), 0644)
if err != nil {
return err
}
return nil
}
示例3: newManagedAddressWithoutPrivKey
// newManagedAddressWithoutPrivKey returns a new managed address based on the
// passed account, public key, and whether or not the public key should be
// compressed.
func newManagedAddressWithoutPrivKey(m *Manager, account uint32, pubKey *btcec.PublicKey, compressed bool) (*managedAddress, error) {
// Create a pay-to-pubkey-hash address from the public key.
var pubKeyHash []byte
if compressed {
pubKeyHash = btcutil.Hash160(pubKey.SerializeCompressed())
} else {
pubKeyHash = btcutil.Hash160(pubKey.SerializeUncompressed())
}
address, err := btcutil.NewAddressPubKeyHash(pubKeyHash, m.chainParams)
if err != nil {
return nil, err
}
return &managedAddress{
manager: m,
address: address,
account: account,
imported: false,
internal: false,
compressed: compressed,
pubKey: pubKey,
privKeyEncrypted: nil,
privKeyCT: nil,
}, nil
}
示例4: SerializePubKey
// SerializePubKey serializes the associated public key of the imported or
// exported private key in compressed format. The serialization format
// chosen depends on the value of w.ecType.
func (w *WIF) SerializePubKey() []byte {
pk := btcec.PublicKey{
Curve: curve,
X: w.PrivKey.PublicKey.X,
Y: w.PrivKey.PublicKey.Y,
}
return pk.SerializeCompressed()
}
示例5: Exists
// Exists returns true if an existing entry of 'sig' over 'sigHash' for public
// key 'pubKey' is found within the SigCache. Otherwise, false is returned.
//
// NOTE: This function is safe for concurrent access. Readers won't be blocked
// unless there exists a writer, adding an entry to the SigCache.
func (s *SigCache) Exists(sigHash wire.ShaHash, sig *btcec.Signature, pubKey *btcec.PublicKey) bool {
info := sigInfo{sigHash, string(sig.Serialize()),
string(pubKey.SerializeCompressed())}
s.RLock()
_, ok := s.validSigs[info]
s.RUnlock()
return ok
}
示例6: computeBlindingFactor
// ComputeBlindingFactor for the next hop given the ephemeral pubKey and
// sharedSecret for this hop. The blinding factor is computed as the
// sha-256(pubkey || sharedSecret).
func computeBlindingFactor(hopPubKey *btcec.PublicKey, hopSharedSecret []byte) [sha256.Size]byte {
sha := sha256.New()
sha.Write(hopPubKey.SerializeCompressed())
sha.Write(hopSharedSecret)
var hash [sha256.Size]byte
copy(hash[:], sha.Sum(nil))
return hash
}
示例7: commitScriptUnencumbered
// commitScriptUnencumbered constructs the public key script on the commitment
// transaction paying to the "other" party. This output is spendable
// immediately, requiring no contestation period.
func commitScriptUnencumbered(key *btcec.PublicKey) ([]byte, error) {
// This script goes to the "other" party, and it spendable immediately.
builder := txscript.NewScriptBuilder()
builder.AddOp(txscript.OP_DUP)
builder.AddOp(txscript.OP_HASH160)
builder.AddData(btcutil.Hash160(key.SerializeCompressed()))
builder.AddOp(txscript.OP_EQUALVERIFY)
builder.AddOp(txscript.OP_CHECKSIG)
return builder.Script()
}
示例8: pubKeyBytes
// pubKeyBytes returns bytes for the serialized compressed public key associated
// with this extended key in an efficient manner including memoization as
// necessary.
//
// When the extended key is already a public key, the key is simply returned as
// is since it's already in the correct form. However, when the extended key is
// a private key, the public key will be calculated and memoized so future
// accesses can simply return the cached result.
func (k *ExtendedKey) pubKeyBytes() []byte {
// Just return the key if it's already an extended public key.
if !k.isPrivate {
return k.key
}
// This is a private extended key, so calculate and memoize the public
// key if needed.
if len(k.pubKey) == 0 {
pkx, pky := btcec.S256().ScalarBaseMult(k.key)
pubKey := btcec.PublicKey{Curve: btcec.S256(), X: pkx, Y: pky}
k.pubKey = pubKey.SerializeCompressed()
}
return k.pubKey
}
示例9: generateAddr
// generateAddr computes the associated bitcon address from the provided
// public key. We compute ripemd160(sha256(b)) of the pubkey and then
// shimmy the hashed bytes into btcsuite's AddressPubKeyHash type
func generateAddr(pub *btcec.PublicKey) *btcutil.AddressPubKeyHash {
net := &chaincfg.MainNetParams
// Serialize the public key into bytes and then run ripemd160(sha256(b)) on it
b := btcutil.Hash160(pub.SerializeCompressed())
// Convert the hashed public key into the btcsuite type so that the library
// will handle the base58 encoding when we call addr.String()
addr, err := btcutil.NewAddressPubKeyHash(b, net)
if err != nil {
log.Fatal(err)
}
return addr
}
示例10: CKDpub
//Deriving Child public Key from Public Parent Key
func (parent *ExtendedPublicKey) CKDpub(index uint32) (*ExtendedPublicKey, error) {
if index >= HardenedKeyIndex {
return nil, nil
}
// let I = HMAC-SHA512(Key = cpar, Data = serP(Kpar) || ser32(i)).
//serP(P): serializes the coordinate pair P = (x,y) as a byte sequence using SEC1's
//compressed form: (0x02 or 0x03) || ser256(x) <-- done above
//, where the header byte depends on the parity of the omitted y coordinate.
data := make([]byte, 37)
copy(data[0:], parent.PublicKey)
binary.BigEndian.PutUint32(data[33:], index)
hmac512 := hmac.New(sha512.New, parent.Chaincode)
hmac512.Write(data)
raw := hmac512.Sum(nil)
//child Chaincode is the right 32 bytes of the result
childChaincode := raw[32:]
// The returned child key Ki is point(parse256(IL)) + Kpar
leftX, leftY := Point(raw[:32])
x1 := new(big.Int).SetBytes(leftX)
y1 := new(big.Int).SetBytes(leftY)
x2 := new(big.Int).SetBytes(parent.X)
y2 := new(big.Int).SetBytes(parent.Y)
childX, childY := btcec.S256().Add(x1, y1, x2, y2)
ParentFingerPrint := parent.GetFingerPrint()
depthBytes := []byte{parent.Depth}
depthInt := new(big.Int).SetBytes(depthBytes)
depthInt.Add(depthInt, big.NewInt(1))
depth := depthInt.Bytes()
publicKey := btcec.PublicKey{Curve: btcec.S256(), X: childX, Y: childY}
childExtendedPublicKey := NewExtendedPublicKey(childX.Bytes(), childY.Bytes(), depth[len(depth)-1], ParentFingerPrint, index, childChaincode, publicKey.SerializeCompressed())
return childExtendedPublicKey, nil
}
示例11: receiverHTLCScript
// senderHTLCScript constructs the public key script for an incoming HTLC
// output payment for the receiver's commitment transaction.
func receiverHTLCScript(absoluteTimeout, relativeTimeout uint32, senderKey,
receiverKey *btcec.PublicKey, revokeHash, paymentHash []byte) ([]byte, error) {
builder := txscript.NewScriptBuilder()
// Was the pre-image to the payment hash presented?
builder.AddOp(txscript.OP_HASH160)
builder.AddOp(txscript.OP_DUP)
builder.AddData(paymentHash)
builder.AddOp(txscript.OP_EQUAL)
builder.AddOp(txscript.OP_IF)
// If so, let the receiver redeem after a relative timeout. This added
// delay gives the sender (at this time) an opportunity to re-claim the
// pending HTLC in the event that the receiver (at this time) broadcasts
// this old commitment transaction after it has been revoked.
builder.AddInt64(int64(relativeTimeout))
builder.AddOp(OP_CHECKSEQUENCEVERIFY)
builder.AddOp(txscript.OP_2DROP)
builder.AddData(receiverKey.SerializeCompressed())
// Otherwise, if the sender has the revocation pre-image to the
// receiver's commitment transactions, then let them claim the
// funds immediately.
builder.AddOp(txscript.OP_ELSE)
builder.AddData(revokeHash)
builder.AddOp(txscript.OP_EQUAL)
// If not, then the sender needs to wait for the HTLC timeout. This
// clause may be executed if the receiver fails to present the r-value
// in time. This prevents the pending funds from being locked up
// indefinately.
builder.AddOp(txscript.OP_NOTIF)
builder.AddInt64(int64(absoluteTimeout))
builder.AddOp(OP_CHECKSEQUENCEVERIFY)
builder.AddOp(txscript.OP_DROP)
builder.AddOp(txscript.OP_ENDIF)
builder.AddData(senderKey.SerializeCompressed())
builder.AddOp(txscript.OP_ENDIF)
builder.AddOp(txscript.OP_CHECKSIG)
return builder.Script()
}
示例12: Add
// Add adds an entry for a signature over 'sigHash' under public key 'pubKey'
// to the signature cache. In the event that the SigCache is 'full', an
// existing entry is randomly chosen to be evicted in order to make space for
// the new entry.
//
// NOTE: This function is safe for concurrent access. Writers will block
// simultaneous readers until function execution has concluded.
func (s *SigCache) Add(sigHash wire.ShaHash, sig *btcec.Signature, pubKey *btcec.PublicKey) {
s.Lock()
defer s.Unlock()
if s.maxEntries <= 0 {
return
}
// If adding this new entry will put us over the max number of allowed
// entries, then evict an entry.
if uint(len(s.validSigs)+1) > s.maxEntries {
// Generate a cryptographically random hash.
randHashBytes := make([]byte, wire.HashSize)
_, err := rand.Read(randHashBytes)
if err != nil {
// Failure to read a random hash results in the proposed
// entry not being added to the cache since we are
// unable to evict any existing entries.
return
}
// Try to find the first entry that is greater than the random
// hash. Use the first entry (which is already pseudo random due
// to Go's range statement over maps) as a fall back if none of
// the hashes in the rejected transactions pool are larger than
// the random hash.
var foundEntry sigInfo
for sigEntry := range s.validSigs {
if foundEntry.sig == "" {
foundEntry = sigEntry
}
if bytes.Compare(sigEntry.sigHash.Bytes(), randHashBytes) > 0 {
foundEntry = sigEntry
break
}
}
delete(s.validSigs, foundEntry)
}
info := sigInfo{sigHash, string(sig.Serialize()),
string(pubKey.SerializeCompressed())}
s.validSigs[info] = struct{}{}
}
示例13: senderHTLCScript
// senderHTLCScript constructs the public key script for an outgoing HTLC
// output payment for the sender's commitment transaction.
func senderHTLCScript(absoluteTimeout, relativeTimeout uint32, senderKey,
receiverKey *btcec.PublicKey, revokeHash, paymentHash []byte) ([]byte, error) {
builder := txscript.NewScriptBuilder()
// Was the pre-image to the payment hash presented?
builder.AddOp(txscript.OP_HASH160)
builder.AddOp(txscript.OP_DUP)
builder.AddData(paymentHash)
builder.AddOp(txscript.OP_EQUAL)
// How about the pre-image for our commitment revocation hash?
builder.AddOp(txscript.OP_SWAP)
builder.AddData(revokeHash)
builder.AddOp(txscript.OP_EQUAL)
builder.AddOp(txscript.OP_SWAP)
builder.AddOp(txscript.OP_ADD)
// If either is present, then the receiver can claim immediately.
builder.AddOp(txscript.OP_IF)
builder.AddData(receiverKey.SerializeCompressed())
// Otherwise, we (the sender) need to wait for an absolute HTLC
// timeout, then afterwards a relative timeout before we claim re-claim
// the unsettled funds. This delay gives the other party a chance to
// present the pre-image to the revocation hash in the event that the
// sender (at this time) broadcasts this commitment transaction after
// it has been revoked.
builder.AddOp(txscript.OP_ELSE)
builder.AddInt64(int64(absoluteTimeout))
builder.AddOp(txscript.OP_CHECKLOCKTIMEVERIFY)
builder.AddInt64(int64(relativeTimeout))
builder.AddOp(OP_CHECKSEQUENCEVERIFY)
builder.AddOp(txscript.OP_2DROP)
builder.AddData(senderKey.SerializeCompressed())
builder.AddOp(txscript.OP_ENDIF)
builder.AddOp(txscript.OP_CHECKSIG)
return builder.Script()
}
示例14: Child
//.........这里部分代码省略.........
//
// For hardened children:
// 0x00 || ser256(parentKey) || ser32(i)
//
// For normal children:
// serP(parentPubKey) || ser32(i)
keyLen := 33
data := make([]byte, keyLen+4)
if isChildHardened {
// Case #1.
// When the child is a hardened child, the key is known to be a
// private key due to the above early return. Pad it with a
// leading zero as required by [BIP32] for deriving the child.
copy(data[1:], k.key)
} else {
// Case #2 or #3.
// This is either a public or private extended key, but in
// either case, the data which is used to derive the child key
// starts with the secp256k1 compressed public key bytes.
copy(data, k.pubKeyBytes())
}
binary.BigEndian.PutUint32(data[keyLen:], i)
// Take the HMAC-SHA512 of the current key's chain code and the derived
// data:
// I = HMAC-SHA512(Key = chainCode, Data = data)
hmac512 := hmac.New(sha512.New, k.chainCode)
hmac512.Write(data)
ilr := hmac512.Sum(nil)
// Split "I" into two 32-byte sequences Il and Ir where:
// Il = intermediate key used to derive the child
// Ir = child chain code
il := ilr[:len(ilr)/2]
childChainCode := ilr[len(ilr)/2:]
// Both derived public or private keys rely on treating the left 32-byte
// sequence calculated above (Il) as a 256-bit integer that must be
// within the valid range for a secp256k1 private key. There is a small
// chance (< 1 in 2^127) this condition will not hold, and in that case,
// a child extended key can't be created for this index and the caller
// should simply increment to the next index.
ilNum := new(big.Int).SetBytes(il)
if ilNum.Cmp(btcec.S256().N) >= 0 || ilNum.Sign() == 0 {
return nil, ErrInvalidChild
}
// The algorithm used to derive the child key depends on whether or not
// a private or public child is being derived.
//
// For private children:
// childKey = parse256(Il) + parentKey
//
// For public children:
// childKey = serP(point(parse256(Il)) + parentKey)
var isPrivate bool
var childKey []byte
if k.isPrivate {
// Case #1 or #2.
// Add the parent private key to the intermediate private key to
// derive the final child key.
//
// childKey = parse256(Il) + parenKey
keyNum := new(big.Int).SetBytes(k.key)
ilNum.Add(ilNum, keyNum)
ilNum.Mod(ilNum, btcec.S256().N)
childKey = ilNum.Bytes()
isPrivate = true
} else {
// Case #3.
// Calculate the corresponding intermediate public key for
// intermediate private key.
ilx, ily := btcec.S256().ScalarBaseMult(il)
if ilx.Sign() == 0 || ily.Sign() == 0 {
return nil, ErrInvalidChild
}
// Convert the serialized compressed parent public key into X
// and Y coordinates so it can be added to the intermediate
// public key.
pubKey, err := btcec.ParsePubKey(k.key, btcec.S256())
if err != nil {
return nil, err
}
// Add the intermediate public key to the parent public key to
// derive the final child key.
//
// childKey = serP(point(parse256(Il)) + parentKey)
childX, childY := btcec.S256().Add(ilx, ily, pubKey.X, pubKey.Y)
pk := btcec.PublicKey{Curve: btcec.S256(), X: childX, Y: childY}
childKey = pk.SerializeCompressed()
}
// The fingerprint of the parent for the derived child is the first 4
// bytes of the RIPEMD160(SHA256(parentPubKey)).
parentFP := btcutil.Hash160(k.pubKeyBytes())[:4]
return newExtendedKey(k.version, childKey, childChainCode, parentFP,
k.depth+1, i, isPrivate), nil
}