当前位置: 首页>>代码示例>>Golang>>正文


Golang log.Printf函数代码示例

本文整理汇总了Golang中github.com/brutella/log.Printf函数的典型用法代码示例。如果您正苦于以下问题:Golang Printf函数的具体用法?Golang Printf怎么用?Golang Printf使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。


在下文中一共展示了Printf函数的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。

示例1: NewDevice

func NewDevice(device common.Device) {
	if light, ok := device.(common.Light); ok {
		hkLight := GetHKLight(light)

		hkLight.sub, _ = light.NewSubscription()
		for {
			event := <-hkLight.sub.Events()
			switch event.(type) {
			case common.EventUpdateLabel:
				log.Printf("[INFO] Updated Label for %s to %s", hkLight.accessory.Name(), event.(common.EventUpdateLabel).Label)
				// TODO Add support for label changes to HomeControl
				log.Printf("[INFO] Unsupported by HomeControl")
			case common.EventUpdatePower:
				log.Printf("[INFO] Updated Power for %s", hkLight.accessory.Name())
				hkLight.light.SetOn(event.(common.EventUpdatePower).Power)
			case common.EventUpdateColor:
				log.Printf("[INFO] Updated Color for %s", hkLight.accessory.Name())

				hue, saturation, brightness := ConvertLIFXColor(event.(common.EventUpdateColor).Color)

				hkLight.light.SetHue(hue)
				hkLight.light.SetSaturation(saturation)
				hkLight.light.SetBrightness(int(brightness))

			default:
				log.Printf("[INFO] Unknown Device Event: %T", event)
			}
		}
	} else {
		log.Println("[INFO] Unsupported Device")
	}
}
开发者ID:Pmaene,项目名称:hklifx,代码行数:32,代码来源:hklifxd.go

示例2: ServeHTTP

func (handler *Characteristics) ServeHTTP(response http.ResponseWriter, request *http.Request) {
	var res io.Reader
	var err error

	handler.mutex.Lock()
	switch request.Method {
	case netio.MethodGET:
		log.Printf("[VERB] %v GET /characteristics", request.RemoteAddr)
		request.ParseForm()
		res, err = handler.controller.HandleGetCharacteristics(request.Form)
	case netio.MethodPUT:
		log.Printf("[VERB] %v PUT /characteristics", request.RemoteAddr)
		session := handler.context.GetSessionForRequest(request)
		conn := session.Connection()
		err = handler.controller.HandleUpdateCharacteristics(request.Body, conn)
	default:
		log.Println("[WARN] Cannot handle HTTP method", request.Method)
	}
	handler.mutex.Unlock()

	if err != nil {
		log.Println("[ERRO]", err)
		response.WriteHeader(http.StatusInternalServerError)
	} else {
		if res != nil {
			response.Header().Set("Content-Type", netio.HTTPContentTypeHAPJson)
			wr := netio.NewChunkedWriter(response, 2048)
			b, _ := ioutil.ReadAll(res)
			wr.Write(b)
		} else {
			response.WriteHeader(http.StatusNoContent)
		}
	}
}
开发者ID:smitterson,项目名称:hc,代码行数:34,代码来源:characteristics.go

示例3: Handle

// Handles event which are sent when pairing with a device is added or removed
func (t *ipTransport) Handle(ev interface{}) {
	switch ev.(type) {
	case event.DevicePaired:
		log.Printf("[INFO] Event: paired with device")
		t.updateMDNSReachability()
	case event.DeviceUnpaired:
		log.Printf("[INFO] Event: unpaired with device")
		t.updateMDNSReachability()
	default:
		break
	}
}
开发者ID:smitterson,项目名称:hc,代码行数:13,代码来源:ip_transport.go

示例4: main

func main() {
	log.Println("[ERRO] Just an error")
	log.Printf("[ERRO] Just an error %d", 1)
	log.Println("[WARN] Just a warning")
	log.Printf("[WARN] Just a warning %d", 1)
	log.Println("[INFO] Just an info")
	log.Printf("[INFO] Just an info %d", 1)
	log.Println("[VERB] Just an info")
	log.Printf("[VERB] Just an info %d", 1)

	log.Error = false
	log.Warn = false
	log.Info = false
	log.Verbose = false

	log.Println("MUST be displayed")
	log.Println("[ERRO] MUST NOT be displayed")
	log.Printf("[ERRO] MUST NOT be displayed %d", 1)
	log.Println("[WARN] MUST NOT be displayed")
	log.Printf("[WARN] MUST NOT be displayed %d", 1)
	log.Println("[INFO] MUST NOT be displayed")
	log.Printf("[INFO] MUST NOT be displayed %d", 1)
	log.Println("[VERB] MUST NOT be displayed")
	log.Printf("[VERB] MUST NOT be displayed %d", 1)
}
开发者ID:tjbx,项目名称:X10Bridge,代码行数:25,代码来源:example.go

示例5: HandleUpdateCharacteristics

// HandleUpdateCharacteristics handles an update characteristic request. The bytes must represent
// a data.Characteristics json.
func (ctr *CharacteristicController) HandleUpdateCharacteristics(r io.Reader, conn net.Conn) error {
	b, err := ioutil.ReadAll(r)
	if err != nil {
		return err
	}

	var chars data.Characteristics
	err = json.Unmarshal(b, &chars)
	if err != nil {
		return err
	}

	log.Println("[VERB]", string(b))

	for _, c := range chars.Characteristics {
		characteristic := ctr.GetCharacteristic(c.AccessoryID, c.ID)
		if characteristic == nil {
			log.Printf("[ERRO] Could not find characteristic with aid %d and iid %d\n", c.AccessoryID, c.ID)
			continue
		}

		if c.Value != nil {
			characteristic.SetValueFromConnection(c.Value, conn)
		}

		if events, ok := c.Events.(bool); ok == true {
			characteristic.SetEventsEnabled(events)
		}
	}

	return err
}
开发者ID:smitterson,项目名称:hc,代码行数:34,代码来源:characteristic_controller.go

示例6: ServeHTTP

func (handler *PairVerify) ServeHTTP(response http.ResponseWriter, request *http.Request) {
	log.Printf("[VERB] %v POST /pair-verify", request.RemoteAddr)
	response.Header().Set("Content-Type", netio.HTTPContentTypePairingTLV8)

	key := handler.context.GetConnectionKey(request)
	session := handler.context.Get(key).(netio.Session)
	controller := session.PairVerifyHandler()
	if controller == nil {
		log.Println("[VERB] Create new pair verify controller")
		controller = pair.NewVerifyServerController(handler.database, handler.context)
		session.SetPairVerifyHandler(controller)
	}

	res, err := pair.HandleReaderForHandler(request.Body, controller)

	if err != nil {
		log.Println(err)
		response.WriteHeader(http.StatusInternalServerError)
	} else {
		io.Copy(response, res)
		// Setup secure session
		if controller.KeyVerified() == true {
			// Verification is done
			// Switch to secure session
			secureSession, err := crypto.NewSecureSessionFromSharedKey(controller.SharedKey())
			if err != nil {
				log.Println("[ERRO] Could not setup secure session.", err)
			} else {
				log.Println("[VERB] Setup secure session")
			}
			session.SetCryptographer(secureSession)
		}
	}
}
开发者ID:tjbx,项目名称:X10Bridge,代码行数:34,代码来源:pair-verify.go

示例7: ServeHTTP

func (handler *PairSetup) ServeHTTP(response http.ResponseWriter, request *http.Request) {
	log.Printf("[VERB] %v POST /pair-setup", request.RemoteAddr)
	response.Header().Set("Content-Type", netio.HTTPContentTypePairingTLV8)

	key := handler.context.GetConnectionKey(request)
	session := handler.context.Get(key).(netio.Session)
	controller := session.PairSetupHandler()
	if controller == nil {
		log.Println("[VERB] Create new pair setup controller")
		var err error
		controller, err = pair.NewSetupServerController(handler.device, handler.database)
		if err != nil {
			log.Println(err)
		}

		session.SetPairSetupHandler(controller)
	}

	res, err := pair.HandleReaderForHandler(request.Body, controller)

	if err != nil {
		log.Println("[ERRO]", err)
		response.WriteHeader(http.StatusInternalServerError)
	} else {
		io.Copy(response, res)
	}
}
开发者ID:tjbx,项目名称:X10Bridge,代码行数:27,代码来源:pair-setup.go

示例8: ServeHTTP

func (endpoint *Pairing) ServeHTTP(response http.ResponseWriter, request *http.Request) {
	log.Printf("[VERB] %v POST /pairings", request.RemoteAddr)
	response.Header().Set("Content-Type", netio.HTTPContentTypePairingTLV8)

	var err error
	var in util.Container
	var out util.Container

	if in, err = util.NewTLV8ContainerFromReader(request.Body); err == nil {
		out, err = endpoint.controller.Handle(in)
	}

	if err != nil {
		log.Println(err)
		response.WriteHeader(http.StatusInternalServerError)
	} else {
		io.Copy(response, out.BytesBuffer())

		// Send events based on pairing method type
		b := in.GetByte(pair.TagPairingMethod)
		switch pair.PairMethodType(b) {
		case pair.PairingMethodDelete: // pairing removed
			endpoint.emitter.Emit(event.DeviceUnpaired{})

		case pair.PairingMethodAdd: // pairing added
			endpoint.emitter.Emit(event.DevicePaired{})

		}
	}
}
开发者ID:smitterson,项目名称:hc,代码行数:30,代码来源:pairings.go

示例9: setupHive

func setupHive() {
	// Connect to Hive
	var err error
	hiveHome, err = hive.Connect(hive.Config{
		Username:        username,
		Password:        password,
		RefreshInterval: 30 * time.Second,
	})

	if err != nil {
		log.Fatal(err)
		return
	}

	hiveHome.HandleStateChange(func(state *hive.State) {
		accessoryUpdate.Lock()
		defer accessoryUpdate.Unlock()

		log.Printf("[VERB] Syncing status with HomeKit\n")

		hotWaterSwitch.Switch.On.SetValue(state.HotWater)

		heatingBoostSwitch.Switch.On.SetValue(state.HeatingBoosted)

		thermostat.Thermostat.CurrentTemperature.SetValue(state.CurrentTemp)
		thermostat.Thermostat.TargetTemperature.SetValue(state.TargetTemp)
		thermostat.Thermostat.CurrentHeatingCoolingState.SetValue(modeForHiveMode(state.CurrentHeatingMode))
		thermostat.Thermostat.TargetHeatingCoolingState.SetValue(modeForHiveMode(state.TargetHeatingMode))
	})
}
开发者ID:njpatel,项目名称:hivekit,代码行数:30,代码来源:main.go

示例10: Handle

// Handle processes a container to pair with a new client without going through the pairing process.
func (c *PairingController) Handle(cont util.Container) (util.Container, error) {
	method := pairMethodType(cont.GetByte(TagPairingMethod))
	username := cont.GetString(TagUsername)
	publicKey := cont.GetBytes(TagPublicKey)

	log.Println("[VERB] ->   Method:", method)
	log.Println("[VERB] -> Username:", username)
	log.Println("[VERB] ->     LTPK:", publicKey)

	entity := db.NewEntity(username, publicKey, nil)

	switch method {
	case PairingMethodDelete:
		log.Printf("[INFO] Remove LTPK for client '%s'\n", username)
		c.database.DeleteEntity(entity)
	case PairingMethodAdd:
		err := c.database.SaveEntity(entity)
		if err != nil {
			log.Println("[ERRO]", err)
			return nil, err
		}
	default:
		return nil, fmt.Errorf("Invalid pairing method type %v", method)
	}

	out := util.NewTLV8Container()
	out.SetByte(TagSequence, 0x2)

	return out, nil
}
开发者ID:tjbx,项目名称:X10Bridge,代码行数:31,代码来源:pairing_controller.go

示例11: Connect

func Connect() {
	var wg sync.WaitGroup

	authenticate()

	urlString := fmt.Sprintf("http://%s/sensors", viper.GetString("Host"))
	req, _ := newRequest("GET", urlString, nil)

	res, _ := client.Do(req)
	defer res.Body.Close()
	jsonBytes, _ := ioutil.ReadAll(res.Body)

	jsonParsed, _ := gabs.ParseJSON(jsonBytes)
	children, _ := jsonParsed.Search("sensors").Children()
	wg.Add(len(children))
	for _, child := range children {
		port := uint8(child.Path("port").Data().(float64))
		output := child.Path("output").Data().(float64) != 0

		log.Printf("[INFO] Discovered Sensor %d", port)

		sensor := &MPSensor{port, output}
		go NewSensor(wg, sensor)
	}

	wg.Wait()
}
开发者ID:Pmaene,项目名称:hkmpower,代码行数:27,代码来源:hkmpowerd.go

示例12: NewSensor

func NewSensor(wg sync.WaitGroup, sensor *MPSensor) {
	defer wg.Done()

	hkSwitch := GetHKSwitch(sensor)
	hkSwitch.ticker = time.NewTicker(30 * time.Second)

	for {
		<-hkSwitch.ticker.C

		log.Printf("[INFO] Updating %s", hkSwitch.accessory.Info.Name.GetValue())

		urlString := fmt.Sprintf("http://%s/sensors/%d", viper.GetString("Host"), hkSwitch.sensor.port)
		req, _ := newRequest("GET", urlString, nil)

		res, _ := client.Do(req)
		defer res.Body.Close()
		jsonBytes, _ := ioutil.ReadAll(res.Body)

		jsonParsed, _ := gabs.ParseJSON(jsonBytes)
		output := jsonParsed.Path("sensors").Index(0).Path("output").Data().(float64) != 0

		hkSwitch.sensor.output = output
		hkSwitch.accessory.Switch.On.SetValue(output)
	}
}
开发者ID:Pmaene,项目名称:hkmpower,代码行数:25,代码来源:hkmpowerd.go

示例13: getStatus

func (h *Hive) getStatus(force bool) {
	log.Printf("[VERB] Refreshing Hive status")
	h.refreshing.Lock()
	defer h.refreshing.Unlock()

	now := time.Now().Unix()
	if force == false && h.lastRefresh > now-avoidRetrySeconds {
		return
	}

	res, err := h.getHTTP(h.baseURL + "/omnia/nodes")
	if err != nil {
		log.Printf("[WARN] Unable to get nodes info: %s", err)
		return
	}
	defer res.Body.Close()

	decoder := json.NewDecoder(res.Body)
	var reply nodesReply
	err = decoder.Decode(&reply)

	if err != nil {
		log.Printf("[WARN] Unable to get nodes info: %s", err)
		return
	}

	state := newStateFromNodes(reply.Nodes)
	if err != nil {
		log.Printf("[WARN] Unable to extract state from reply: %s", err)
		return
	}

	h.lastState = *state
	if h.stateChangeHandler != nil {
		go h.stateChangeHandler(state)
	}

	h.lastRefresh = now
}
开发者ID:njpatel,项目名称:hivekit,代码行数:39,代码来源:hive.go

示例14: ServeHTTP

func (handler *Pairing) ServeHTTP(response http.ResponseWriter, request *http.Request) {
	log.Printf("[VERB] %v POST /pairings", request.RemoteAddr)
	response.Header().Set("Content-Type", netio.HTTPContentTypePairingTLV8)

	res, err := pair.HandleReaderForHandler(request.Body, handler.controller)

	if err != nil {
		log.Println(err)
		response.WriteHeader(http.StatusInternalServerError)
	} else {
		io.Copy(response, res)
	}
}
开发者ID:tjbx,项目名称:X10Bridge,代码行数:13,代码来源:pairings.go

示例15: GetHKSwitch

func GetHKSwitch(sensor *MPSensor) *HKSwitch {
	hkSwitch, found := switches[sensor.port]
	if found {
		return hkSwitch
	}

	label := fmt.Sprintf("mPower Port %d", sensor.port)
	log.Printf("[INFO] Creating New HKSwitch for %s", label)

	info := accessory.Info{
		Name:         label,
		Manufacturer: "Ubiquiti Networks",
	}

	acc := accessory.NewSwitch(info)
	acc.Switch.On.SetValue(sensor.output)

	config := hc.Config{Pin: pin}
	transport, err := hc.NewIPTransport(config, acc.Accessory)
	if err != nil {
		log.Fatal(err)
	}

	go func() {
		transport.Start()
	}()

	hkSwitch = &HKSwitch{acc, sensor, nil, transport}
	switches[sensor.port] = hkSwitch

	acc.OnIdentify(func() {
		timeout := 1 * time.Second

		for i := 0; i < 4; i++ {
			ToggleSensor(sensor)
			time.Sleep(timeout)
		}
	})

	acc.Switch.On.OnValueRemoteUpdate(func(on bool) {
		SetOutput(sensor, on)
	})

	return hkSwitch
}
开发者ID:Pmaene,项目名称:hkmpower,代码行数:45,代码来源:hkmpowerd.go


注:本文中的github.com/brutella/log.Printf函数示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。